Database Develop

Restore Original Hard-SPL

Hi at all,
I had uploaded on my P3600 olipro spl 1.30 but now I need to send my P3600 to laboratory for assistance. I need to restore the original SPL. Where can I download it?
thk a lot,
Dormone

You need to check the wiki and download the latest offical rom for your phone, then proceed to flash it via sspl which should then overwrite the ipl/spl/splashes/etc all back to stock for your carrier.

thks for reply,
I had download the last official rom from htc club updated 30-07-07 after upgrade I checked pressing power button + camera button + soft reset but olipro spl is still present.

You flashed it with the included updater in that case, you need to put the signed file into one of the other update packages we have at this site, those use sspl to "force" a update of the ipl/spl even when hard-spl is blocking it...

thanks a lot shadowmite,
I used sspl to force original upgrade. Now all is ok.
thanks again
bye
Dormone

dormone said:
thanks a lot shadowmite,
I used sspl to force original upgrade. Now all is ok.
thanks again
bye
Dormone
Click to expand...
Click to collapse
What sspl? The ruu modified?

I'm not expert but I had read this post http://forum.xda-developers.com/showthread.php?t=293632 after I copy the file sspl.exe in the pda and execute the file. follow i had upgrade the original rom and al was ok also the bootloader.
bye,
Dormone

Bootloader Version?

Does anyone recognize what version of the bootloader this is in my Trinity? It should be Des' SSPL but I think it's HTC's. Isn't Des' supposed to end in .ds?
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
Serial

this is Des' Crash Proof SPL. that's why it ends in CP (Crash Proof)

racerx_ said:
this is Des' Crash Proof SPL. that's why it ends in CP (Crash Proof)
Click to expand...
Click to collapse
Thank you.
It worked well to update my P3600 to the D810 WM6 ROM.

can you help me please! i lost my brain! How to flash des crash proof?

same way you flash any other hard-spl... just run the RUU without manually going in to bootloader.

racerx_ said:
same way you flash any other hard-spl... just run the RUU without manually going in to bootloader.
Click to expand...
Click to collapse
but where can i find it. The only version i found is the version for sd-card not ruu. Should i be blind?

you're looking for des crash-proof spl? it's here in the trinity forums somewhere.. zakmcrofl repackaged it and posted it as well. I guess you could search for posts by him or by des and find it. I can't find it on my hard-drive, i must've gotten rid of it.
curious, though, why do you want that spl?

racerx_ said:
you're looking for des crash-proof spl? it's here in the trinity forums somewhere.. zakmcrofl repackaged it and posted it as well. I guess you could search for posts by him or by des and find it. I can't find it on my hard-drive, i must've gotten rid of it.
curious, though, why do you want that spl?
Click to expand...
Click to collapse
Yes you are right! I had some trouble with Hard-Spl 1.30, go back to 1.20 and now i am back to 1.07.000. I just want to test des one.
Secondary i have trouble with my touchscreen it is very slow and sometimes it does not response. Maybe this a problem by spl so i give all a try.
Update: I found it extract it from the rom and repacked it.
and zakmcrofl said in his posting here http://forum.xda-developers.com/showthread.php?t=301854&highlight=zakmcrofl:
Update: one user had the whitescreen issue (see Hermes forum) so I reverted to DES' Hard-SPL. Hopefully everything works fine for everyone now.
Click to expand...
Click to collapse

Rom update for a N00B

Hi Guys,
I have just found the (newest) ROM for my Mteor (RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar) But I dont have ANY experience flashing my device with new ROMs
Should I just install this ROM and see what happens or do I have to make some extra actions to get this ROM properly installed?
Could anyone please help me (in a N00B language) to get my device updated?
I saw that some versions of the IPL (?) en SPL (?) makes differences, but I don't know what versions I use. What versions of IPL and SPL should I have?
THNX!

the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!

futureshock said:
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
Click to expand...
Click to collapse
Alrighty!!!
I shall keep you informed about my progress. (first try to flash my device only using the original ROM)

I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!

DaLuca said:
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
Click to expand...
Click to collapse
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR

jerpelea said:
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!

DaLuca said:
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
Click to expand...
Click to collapse
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05

jerpelea said:
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
Click to expand...
Click to collapse
oh... hmm... okay... sorry! Thats why the topic-title is "Rom update for a N00B"
But thanks that you cleared this question.

help! WHO CAN HELP ME!

hi all! i have some problem about upgrade my phones SPL to 1.10? i have read jerpelea`s thread about upgrade SPL! but i dont know how to made it ! step7 !from that !i dont know! if i must download the WWE rom and upgrade my phone with this rom using the SSPL7.77? and then donwload the sofeware from" http://forum.xda-developers.com/attachment.php?attachmentid=38680&d=1178637546"! this sofeware include breezessplv1.nb ,spl.lnk ,SSPL.exe !whats the use for this .nb file? is it a SPL1.10 upgrade file? whether upgrade the SPL1.10 in my phone without PC? just copy breezessplv1.nb to my storage card and turn it to TRI-COLOR SCREEN to flash it ,right ?

stationalz said:
hi all! i have some problem about upgrade my phones SPL to 1.10? i have read jerpelea`s thread about upgrade SPL! but i dont know how to made it ! step7 !from that !i dont know! if i must download the WWE rom and upgrade my phone with this rom using the SSPL7.77? and then donwload the sofeware from" http://forum.xda-developers.com/attachment.php?attachmentid=38680&d=1178637546"! this sofeware include breezessplv1.nb ,spl.lnk ,SSPL.exe !whats the use for this .nb file? is it a SPL1.10 upgrade file? whether upgrade the SPL1.10 in my phone without PC? just copy breezessplv1.nb to my storage card and turn it to TRI-COLOR SCREEN to flash it ,right ?
Click to expand...
Click to collapse
just follow the guide

thanks jerpelea! follow guide? but from step 7 on ,i dont understand! could you tell me how to do after appunlock? if i must upgrade my phone with wwe for first, and then upgrade the phones spl to 1.10 with the breezessplv1.nb ?

stationalz said:
thanks jerpelea! follow guide? but from step 7 on ,i dont understand! could you tell me how to do after appunlock? if i must upgrade my phone with wwe for first, and then upgrade the phones spl to 1.10 with the breezessplv1.nb ?
Click to expand...
Click to collapse
copy the 3 files into the root of the phone and run spl.lnk
this is the software spl loader
is an modded spl that is loaded into ram permiting you to flash any CID
.nb is the actual spl
.exe is the loader
.lnk is an text file (open in notepad)
BR

thanks jerpelea !but which do the first? upgrading with the wwe or upgrading with this .nb file for first? you are a great man! you are very nice!

this nb file is loades every time you want to flash an new rom
this .nb is not flashed to the device is loaded from an functional phone
so i don't understand your question
just follow the guide

thanks! just copy these three files to my device and upgrade my phone with the wwe rom, right?

stationalz said:
thanks! just copy these three files to my device and upgrade my phone with the wwe rom, right?
Click to expand...
Click to collapse
yes
you got it

thank you! you are a kind man!

htc diamond touch 100 stops at 0% when tryn to flash hspl

htc diamond touch 100 stops at 0% when tryn to flash hspl
pls help me out.
dia100 64m
spl-1.37.00
microp-diam[led] v11
psoc-diam stage pvt v030

You shud try SSPL method first to pass the HSPL. search for the SSPL here.

ayyu3m said:
You shud try SSPL method first to pass the HSPL. search for the SSPL here.
Click to expand...
Click to collapse
where should i search 4 it

here. see the attachments. first download and do JUMP SPL (SSPL) and then flash ur HSPL or the one i have attached here (1.93)

Downgrade your radio to one below 1.02.xxxxx before hardspl flash

Hey all,
I would like to add one thing that helped me - I had the same issue:
- Restore to original (eventually branded) stock ROM (this is needed for branded versions, worked for me also with radios higher than 1.02.xx.xx)
- Then install Hard-SPL
- Then MTTY
- Then newly cooked ROM
Hope our support can help you
Greets from Switzerland

dominica said:
htc diamond touch 100 stops at 0% when tryn to flash hspl
pls help me out.
dia100 64m
spl-1.37.00
microp-diam[led] v11
psoc-diam stage pvt v030
Click to expand...
Click to collapse
i have the same problem like but my SPL ver is 2.03.0000
the problem is that i cant use jumpspl anymore because i first tried to flash the device using MTTY so i formated my device and now i cant access its internal memory...can someone give me a rom for SPL 2.03 or tell me how to change SPL from USB because i can enter only in bootloader

magicdave26 said:
Downgrade your radio to one below 1.02.xxxxx before hardspl flash
Click to expand...
Click to collapse
pls help me with the steps to downgrade

Christoph21x said:
Hey all,
I would like to add one thing that helped me - I had the same issue:
- Restore to original (eventually branded) stock ROM (this is needed for branded versions, worked for me also with radios higher than 1.02.xx.xx)
- Then install Hard-SPL
- Then MTTY
- Then newly cooked ROM
Hope our support can help you
Greets from Switzerland
Click to expand...
Click to collapse
can u give me the site to download this files

ayyu3m said:
here. see the attachments. first download and do JUMP SPL (SSPL) and then flash ur HSPL or the one i have attached here (1.93)
Click to expand...
Click to collapse
hi
write file jump and finish but error 260 for HSPL 1.93