Database Develop

ROM Upgrade -> Vendor ID Error

Hello! I've tried to change the language on my mda compact2(bought from Austria) from German to English but while installing the T-Mobile 2.6.2.110 UK ROM "Vendor ID error" appears. What should i do? I hope you have solution for my problem thanks

neversummer said:
Hello! I've tried to change the language on my mda compact2(bought from Austria) from German to English but while installing the T-Mobile 2.6.2.110 UK ROM "Vendor ID error" appears. What should i do? I hope you have solution for my problem thanks
Click to expand...
Click to collapse
Extract the Rom file to a folder on your pc.
than download this file: http://forum.xda-developers.com/attachment.php?attachmentid=30778&d=1160429997 and Extract it into the Rom folder.
than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
that should do the trick.

shayd said:
http://forum.xda-developers.com/attachment.php?attachmentid=30778&d=1160429997
that should do the trick.
Click to expand...
Click to collapse
This archive says that the file is corrupted Anyway, i found some posts of Ulymanchild who had the same problem as me so here is his solution:
1.Down load HTC_Charmer _upgradeut_noid
2.http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
3.Download Any Charmer ROM Utility.
4.Extract nk.nbf from the Charmer ROM Utility.
5.Place nk.nbf to the HTC_Charmer upgradeut_noid.
6.Get the upgrade with no ID Errors.
7.GOT TO LOVE IT!
Unfortunately, i can't do
3.Download Any Charmer ROM Utility.
4.Extract nk.nbf from the Charmer ROM Utility.
5.Place nk.nbf to the HTC_Charmer upgradeut_noid.
how can i extract nk.nbf

to get the nk.nbf, just open the executable rom package in winRAR

neversummer said:
Unfortunately, i can't do
3.Download Any Charmer ROM Utility.
4.Extract nk.nbf from the Charmer ROM Utility.
5.Place nk.nbf to the HTC_Charmer upgradeut_noid.
how can i extract nk.nbf
Click to expand...
Click to collapse
3. Download Charmer ROM from here: ftp://ftp.xda-developers.com/Uploads/Charmer/Shipped_ROMs/
4. Right click on the file you just downloaded and Extract to an empty folder on your desktop (you will find in that folder the nk.nbf you are looking for).
5. make sure your phone is connected to pc via activesync, copy the file I attached to this post (ROMUpdateUtility_Wizard_NoID.exe) in to this folder, and double click on it.
That should do the job.

It happened waaaaaaaa i'm so happy it is so different(for good)! Thank you all you 're my best friends!

Well, I want to upgrade my rom on htc charmer too. I understand how to, but I have the newest Czech WM5 in only-setup-file rom, how can I extract this ? Or I need only the RARed or ziped roms, so the setup files of roms are unusable ? thanks for help

disn3y said:
Well, I want to upgrade my rom on htc charmer too. I understand how to, but I have the newest Czech WM5 in only-setup-file rom, how can I extract this ? Or I need only the RARed or ziped roms, so the setup files of roms are unusable ? thanks for help
Click to expand...
Click to collapse
Do you want to upgrade from Czech to WWE?
When you right click on the setup file, do you have the extract option?

Hi, i can't make upgrade of my charmer. I do all steps that you say and romupdate program says that hi can't open the requested file (error 208). Any ideas?

use the RUU from here
http://www.windowsceportal.hu/tartal...adeut_noid.zip

i have same problem with htc p5500 how to solve? error vendor id
please very urgent

one question please:
is it possible to use HTC_Charmer upgradeut_noid to upgrade hard spl
i have ID ERROR IF I UPDATE THE ROM and i have an other error if i update spl ..

how do i get the rom the link its not working

Please help me! I have the WM6.1 ROM made by vlodeck and nocturne on my MDA Compact II.
I want to downgrade to WM5. With shipped roms i can't, coz i get Vendor ID error ofcz. If i wanna use the Charmer AKU2 upgrade, then it says, that i need another updater (error no.: 300). If i use the noid one, then it says something about missing files, and tells me to re-download the updater. I did it but it still says the same. Please help me, its very important. Thx : andor44

rickyB83 said:
one question please:
is it possible to use HTC_Charmer upgradeut_noid to upgrade hard spl
i have ID ERROR IF I UPDATE THE ROM and i have an other error if i update spl ..
Click to expand...
Click to collapse
Hi!
I think there is no hardspl for Charmer.You can CID unlock it easily with lokiwiz02,if your IPL,SPL is V1 or V2(f.e.:2.26).
Post the error code with noid or post a screenshot.
BR
Scootie

lito21 said:
how do i get the rom the link its not working
Click to expand...
Click to collapse
Hi!
Which ROM do you need?
The last link seems working:
http://www.tm-phonedownloads.com/dm_compact2_sw.html
CID unlock first!!
After installing AKU3.3 you can't downgrade to AKU2.
BR
Scootie

andor44 said:
Please help me! I have the WM6.1 ROM made by vlodeck and nocturne on my MDA Compact II.
I want to downgrade to WM5. With shipped roms i can't, coz i get Vendor ID error ofcz. If i wanna use the Charmer AKU2 upgrade, then it says, that i need another updater (error no.: 300). If i use the noid one, then it says something about missing files, and tells me to re-download the updater. I did it but it still says the same. Please help me, its very important. Thx : andor44
Click to expand...
Click to collapse
Hi!
Weird,because cooked ROMs usually can't be installed on CID locked devices.
Try to CID unlock it with lokiwiz02,then retry upgrade with AKU2.
Post IPL,SPL!
BR
Scootie

I have CID unlocked it before installed WM6.1... But it doesn't matter anymore. A user called 'rmagyar' solved my problem in PM.

andor44 said:
I have CID unlocked it before installed WM6.1... But it doesn't matter anymore. A user called 'rmagyar' solved my problem in PM.
Click to expand...
Click to collapse
Good news!
Could you share the solution here to help others with the same problem?
(Örülök,hogy sikerült.Használd egészséggel!)
BR
Scootie

scootie said:
Good news!
Could you share the solution here to help others with the same problem?
(Örülök,hogy sikerült.Használd egészséggel!)
BR
Scootie
Click to expand...
Click to collapse
Well i don't know the exact source of the problem . I'll upload a proper fix-kit for people who messes up something...

SPL downgrade?

Heloo brothers....
I just want to know is there any SPL downrgrading techniqe avilable?
my pda's specification are as follows
ipl 3.08
spl 3.08
gsm 02.19.11
os 2.21.2.6
I am unable to install wm6 nor T -mobile's orginall ruu working is there any way to install 1m6 on my machine...i am new user so i need help plzzzzz.

I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?

freeyayo50 said:
I want kno the same thing.
Is there a tool to downgrade just the SPL/IPL alone without changing anything else or still downgrading the OS ROM is the only way?
Click to expand...
Click to collapse
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"

mestrini said:
there are several tools that will end up by giving you what you want but you must build the RUU yourself.
HOW:
Get an RUU with the IPL/SPL version you want (be carefull with the G3/G4 difference!!!!)
Extract the nk.nbf from the updater and then extract the chunks (you can use my tool or typho5.exe)
Get nb2nbf_tornado.exe and make your own nk.nbf with IPL/SPL only
Pack it again inside an RUU updater and use it to flash
That's it
cheers
PS:
Use the search to feature to learn about "nb2nbf_tornado.exe"
Click to expand...
Click to collapse
Or you could flash the lowest T-mobile rom you can find, it should put you back to 1.08 or something like that!!! When i have to downgrade i always get these!!! Then you just upgrade your OS again to what you want and there you go!

I have a HTC Wizard G3. Can I use Button Wizard ROM's SPL/IPL?
I used nb2nbf_wizard.exe to make what's in the attached picture. Does it look correct?
Also, I have nb2nbf_tornado.exe & nb2nbf_wizard.exe...are they the same thing. There both v2.02.

It looks fine to me. post results after, plz
...and check my signature tx

mestrini said:
It looks fine to me. post results after, plz
...and check my signature tx
Click to expand...
Click to collapse
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.

freeyayo50 said:
Great!! I deff will.
When using your Wizard Service Tool, if i do Read ROM-->SPL...will this also read the IPL as well??
I want to know so I can just do a Write ROM---->SPL to restore both after I downgrade to SPL/IPL 1.xx.
Click to expand...
Click to collapse
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...

mestrini said:
nope. IPL is not readable via RAPI/TRUEFFS tools like my tool, only via boot loader and SD card i guess...
Click to expand...
Click to collapse
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.

freeyayo50 said:
Oh ok. Then how would i make a backup of my SPL/IPL. I looked at aWizard, but it doesn't support it.
Click to expand...
Click to collapse
no it doesn't. aWizard is based on same apps as my tool; in fact aWizard is where i got my inspiration from (thanks ahlok_hk )
as i told before, only using mtty and boot loader commands to make a full backup to the SD card, but for that the phone must be CID unlocked
But IPL/SPL are generic so you just grab a RUU updater with same IPL/SPL as yours and you'll have your backup

I extracted these from a OEM Cingular ROM. What are the differences between both sets of SPL/IPL's??
When restoring my SPL/IPL, which set should i use?

Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers

mestrini said:
Okay, this is where you got to be careful since a pair is for G3 (IPL_1) and the other is for G4 (IPL_2). You don't see it in 1.x ROMs since there were no G4 devices then
cheers
Click to expand...
Click to collapse
Wow, thanks for letting me know. I'll make sure to use the IPL_1 for my restore.

Restore Original Hard-SPL

Hi at all,
I had uploaded on my P3600 olipro spl 1.30 but now I need to send my P3600 to laboratory for assistance. I need to restore the original SPL. Where can I download it?
thk a lot,
Dormone

You need to check the wiki and download the latest offical rom for your phone, then proceed to flash it via sspl which should then overwrite the ipl/spl/splashes/etc all back to stock for your carrier.

thks for reply,
I had download the last official rom from htc club updated 30-07-07 after upgrade I checked pressing power button + camera button + soft reset but olipro spl is still present.

You flashed it with the included updater in that case, you need to put the signed file into one of the other update packages we have at this site, those use sspl to "force" a update of the ipl/spl even when hard-spl is blocking it...

thanks a lot shadowmite,
I used sspl to force original upgrade. Now all is ok.
thanks again
bye
Dormone

dormone said:
thanks a lot shadowmite,
I used sspl to force original upgrade. Now all is ok.
thanks again
bye
Dormone
Click to expand...
Click to collapse
What sspl? The ruu modified?

I'm not expert but I had read this post http://forum.xda-developers.com/showthread.php?t=293632 after I copy the file sspl.exe in the pda and execute the file. follow i had upgrade the original rom and al was ok also the bootloader.
bye,
Dormone

EVERY HERALD.be carefull.please do read this.

I had seen the Aserg using he USPL to flash his rom and radio.
GUYs:
DO remember,if you are not Hard-spl,your spl ipl is lower than 4.00.0000,Please don't run JUMPSPL or USPL-BETA3 by pof.
Trust me or you will find lots of bricks on street.
Click to expand...
Click to collapse
If you are HTC 4350 OR VADEFONE OR T-WING.run official ruu update to WM6 frist,to make you IPL SPL upon 4.00.0000
If you think I am joking.keep on..
Click to expand...
Click to collapse
check more here or here

And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?

ASerg said:
And if ipl/spl: 5.04.0001/5.04.0000 from WM5??? That is possible?
Click to expand...
Click to collapse
that's ok. nothing at all.
safely.

Now I shall check up

I confirm. Thanks!

ASerg said:
I confirm. Thanks!
Click to expand...
Click to collapse
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use

i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.

umchriswho said:
i want to be able to flash my rom so that i could install the HTC RUU on my tmo wing ( it's actually a herald but i was stupid enough to put in the TMO RUU)
Do you know any way i could do that with instructions available?
Also, once i do it, would the phone become unlocked again or still locked Just wondering.
Click to expand...
Click to collapse
The HARD-SPL is a little more dangerous than the USPL... I can help you find ways to get any ROM you want on that phone easily enough, but UNLOCKING it again is the hard part. There's not 100% sure fire SAFE way of doing it.

welll, i just installed the hard-spl on my device and it went through
there's just one thing that gets me...
what's the difference with this hard-spl and HTC?
is the only difference is that the boot screen is different or are there more features?
For now, I just need a comparision of what the hard-spl has from the HTC one.

The Hard-SPL is a customer SPL. It's permanent, too. You will have to create your own customized RUU from now on, one that lacks the SPL. You can't flash RUU's that contain SPL because the SPL is now write protected. It's convinient, though, because now you can't accidently screw it up. (It's safe once you have it IN your device. Too many people brick their phones trying to get it in there in the first place, though.)

So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.

Now you can flash ANY rom you want.
ALL cooked ROms - really all - without the chance of bricking = your device is SAFE.
IF you respect this little thing
every RUU Rom Update Utility
contains:
1. Enterbootloader.exe
2. Rapitool.exe
3. RomupgradeUtility.exe (the one you start)
4. RUUGetinfo.exe
5. RUU ressource.dll
6. RUU_signed.nbh (that is the custom system OS - you can put every HERALD .nbh here postet in touchIT3 for example)
7. SPL.nbh ---- !!!!!!!! delete this allways!!!!!!!!! ------ (it is in all official RUU but delete it)
now you can flash with an official update tool all custom roms for you herald.
But don´t use wing roms - the keyboadmapping is different.
There are good herald roms, too.
Good luck
umchriswho said:
So now i won't be able to put in the HTC RUU anymore?
All right, sorry i'm being so stupid, but here's another question...
You said that i now have to make my own customized RUUs?
What do you mean by that?
If you don't mind, you could send me a pm, I don't want to spam this thread with my stupidity.
Click to expand...
Click to collapse

Dear Maestro Help upgrade to WM6
Dear Canonyang,
Have the following
Dopod C800 WM5 5.1.422 (Build 15633.3.2.0)
Can you please help me upgrade to WM 6
Gratefully
neelanjoo
canonyang_China said:
please warn people in your post.
and why don't you use jspl.it's quick and safely.uspl too slow but simply use
Click to expand...
Click to collapse

URGENT: flashing back to stock for warrenty - all gone wrong

hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks

Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...

Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath

Ikkari said:
Did you tried to flash back your original SPL??
USPL is just a temporary patch of the SPL...
I think you have to flash back to SPL 1.15...
To check if you have the right version put phone in bootloader mode it should displaying SPL 1.15...
Click to expand...
Click to collapse
thats the problem
i dont know how?

D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?

D'rath said:
Read here http://forum.xda-developers.com/showthread.php?t=431217
D'rath
Click to expand...
Click to collapse
Just look in the first post under:
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!

very strange
its working now
just needed a hard reset!
thanks for your help
edit------------
scratch that, its displaying them stupid colours again
GREAT!

m.r.davies said:
Thanks but thats for Hard SPL, where as i used USPL
or am i getting it all wrong?
Click to expand...
Click to collapse
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15

Ikkari said:
You are getting it wrong!
USPL is a temporary patch to allow you to flash a unauthorized ROM!
You have currently SPL 1.56 installed, but you need flash back stock SPL 1.15
Click to expand...
Click to collapse
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks

m.r.davies said:
thanks
i understand the problem now
but the link that was posted talks about hard spl, and when it says about reverting the rom, it talks about using hard spl, which is where i'm getting confused
Could you clarify which steps i need to take as its still showing spl 1.54
thanks
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.

m.r.davies said:
hi
i've need some help urgently on this as the phone is being picked up in the morning and its currently going really bad
i had dutties 3.9 rom on, but i found a 1.19 orange rom in the wiki, so installed this.
however the display is very bad, and is only showing 16 colours so looks rubbish
I belive this is to do with the SPL
This is what i did:
1. put phone in bootloader mode (was displaying SPL 1.56)
2. ran blac_uspl.exe in USB mode which changed the SPL to 1.15 (USPL)
3. installed the rom
did i do something wrong?
any help VERY appreciated
Thanks
Click to expand...
Click to collapse
1. dnload the stock spl from the said thread.
2. dnload the hspl 1.56 olinex wrapper
3. connect ur fone to pc in the bootloader mode.
4. run the hspl 1.56 olinex wrapper and do nothing to the onscreen utility.
5. wait fr the files to be xtracted in the window from where u ran the hspl wrapper.
6. replace the self extracted ruu_signed.nbh with the stock spl 1.15 that u downloaded.
7. continue with the ruu utility.
thats all thts needed..

ultimatepichu said:
go to http://forum.xda-developers.com/showthread.php?t=431217
view the very last part of first post. It teaches you EVERYTHING. I think the part that you confused is going from step3 to step4. Read carefully. =)
good luck.
Click to expand...
Click to collapse
Thanks
yes you're right, it solved my problem
the reason i didn't try in the first place was becuase the title said HARD SPL and i didn't want to mess it up as i used USPL
i used Restore_Stock_SPL_115.zip and swapped the nbh file after initilizing installation (after extraction) and it worked great
thanks for all your help guys!!!!!!
i really appreiciate it

My god, I was feeling your anguish while reading this topic until the end...

Black Antitoon said:
My god, I was feeling your anguish while reading this topic until the end...
Click to expand...
Click to collapse
I eventually went to bed at 2:30am
all sorted now and got my new phone!
woohoo