Related
This tool allow to flash your Trinity ROM bypassing CID and signature(*) check.
For flashing ROM copy SSPL-TRIN.exe to your device and run it. Standart bootloader prompt should appear on screen, check SPL version number: if it ends with ".ds" then everything is fine. (Re)attach usb cable and run firmware update utility.
In case if something goes wrong during flashing you should flash your device with ROM accepted by standard bootloader (and have another try if you wish).
(*) code must be formally signed i.e. contain properly-formated signatures on their places, however no checking are performed against them. Actualy unsigned code flashing was tested by flashing original signed nbh image with few bytes in header and extrom section modified, but patches were designed to accept any properly formatted crap as a valid signature.
See readme.txt for more info
Русскоязычное обсуждение здесь
If you feel yourself as an advanced user and going to do things more complex than described above - read readme.txt before doing them !
Hermes version here: http://forum.xda-developers.com/showthread.php?t=293651
let me be the first one to Thank you for this free unlocker! it works!
super thanks.
torquefever said:
let me be the first one to Thank you for this free unlocker! it works!
Click to expand...
Click to collapse
Is that true ?
The Trinity update bypass works perfectly.
As for hermes i cannot test that one.
A minor thing i noticed that it doesn't return the current rom version to the romupdateutility just says "".
Great work
eddietse said:
Is that true ?
Click to expand...
Click to collapse
if you are asking 'bout trinity then yes. If 'bout hermes then I wanna know in too but I'm 90% shure that there would be no surprise. Anyway (please don't treat this as official acceptance of responsibility ) chance of bricking device is immeasurably low: in the wrost case SPL simply hangs unstarted (you could't do anything wrong in this case).
Wire64 said:
A minor thing i noticed that it doesn't return the current rom version to the romupdateutility just says "".
Click to expand...
Click to collapse
Afaik version number is retrieved by RUUGetInfo.exe started from CE. And you won't get this when you are starting your flashing on device already in SPL service mode (even with normal SPL).
thx
I m waiting so long time
u are the best
works perfect on HERMES
Thanks for your great tool Des! You are the best!
@pof thanks for reply.
Do we need such tool running on another devices (list please) ?
Des said:
if you are asking 'bout trinity then yes. If 'bout hermes then I wanna know in too but I'm 90% shure that there would be no surprise. Anyway (please don't treat this as official acceptance of responsibility ) chance of bricking device is immeasurably low: in the wrost case SPL simply hangs unstarted (you could't do anything wrong in this case).
Afaik version number is retrieved by RUUGetInfo.exe started from CE. And you won't get this when you are starting your flashing on device already in SPL service mode (even with normal SPL).
Click to expand...
Click to collapse
Thank's for your reply
is that means I can flash the Now GPS Rom on my D810 ?
eddietse said:
Thank's for your reply is that means I can flash the Now GPS Rom on my D810 ?
Click to expand...
Click to collapse
Maybe I'm too rude person, but why don't you simply try it yourself (and report the result) ?
Thank you!
As far as I understand, this will allow for flashing of any "cooked" firmware to above mentioned devices and some others..
Well, I have got few devices here ( as per my signature). Please let me know if more testing is required.
SecureGSM said:
this will allow for flashing of any "cooked" firmware to above mentioned devices and some others.
Click to expand...
Click to collapse
Yes it should. Have neither time nor expirence on cooking modern devices firmware (dump/restoreimgfs version that I have don't work on Trinity rom and I have no will to make it working unless forced to) so flashing realy "cooked" rom was not tested. But as mentioned above I was able to successfully flash original rom with some bytes modified and from signatures point of view this makes no difference with cooked ROM.
Noted. Thanks for your efforts.
Not at all. And I hope that ability to flash unsigned code to any device would create demand for rom cooking toolchain and it would be (if it havn't already) develoed to support newer roms.
Great...... work Des
but what do you think it is better to do that method;
or the first payed method; (ssid)
what the diferent's betwen the payed method;
if somebody have a supersid device can use that;
Thanks for your great work.....
Great!!!!!!!!!!
Thanks a lot !!
Thank you very much, And my Hong Kong version D810 can use
Taiwan GPS Rom now (with T. Chinese)
Des said:
@pof thanks for reply.
Do we need such tool running on another devices (list please) ?
Click to expand...
Click to collapse
HTC Breeze smartphone should be a good candidate, as it should be very similar to hermes & trinity.
Also you can try on Artemis, but artemis uses DOC and is quite a different platform.
I really give you many thanks for this great work and effort
Removed pending posting of instructions.
What is this for?
Thanx.
Prislav said:
Hi!
Subj - http://rapidshare.com/files/76444771/wzg3.7z
Click to expand...
Click to collapse
Sorry, not meant as a slam, but someone with only 21 posts, puts up a Rapidshare link for something to flash to a Wizard saying its HardSPL and no other instructions or information... Sorry (again, no offense meant by this) but I wouldn't flash something that is unexplained (if there is another post about this, then at least give a pointer to that in the first post).
FWIW: HardSPL is a way of making your device almost unbrickable. If it works like with the Hermes and Kaiser HardSPL, then you do the steps needed to install this, instead of the old CID unlock procedure of having to go back to the Button ROM and running lokiwiz.
But still, I'd be careful flashing something like this until more is known about it (the source, instructions for the method to install it, etc).
Totally agreed! I wouldn't go for it!
I don't mind to brick my wizard again!
mfrazzz
I with you agree, but...
I shall be immodest - please read ALL my messages ;-)
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
mfrazzz said:
Sorry, not meant as a slam, but someone with only 21 posts, puts up a Rapidshare link for something to flash to a Wizard saying its HardSPL and no other instructions or information... Sorry (again, no offense meant by this) but I wouldn't flash something that is unexplained (if there is another post about this, then at least give a pointer to that in the first post).
FWIW: HardSPL is a way of making your device almost unbrickable. If it works like with the Hermes and Kaiser HardSPL, then you do the steps needed to install this, instead of the old CID unlock procedure of having to go back to the Button ROM and running lokiwiz.
But still, I'd be careful flashing something like this until more is known about it (the source, instructions for the method to install it, etc).
Click to expand...
Click to collapse
Lokiwiz has been a trusted and faithful friend. Until I get more info, instructions, screeners even...I will keep using my trusted friend Loki.
No offense to the OP, but "read my other posts" doesn't tell us much. Your other posts are just like this one. Short and to the point, no real info given...nothing telling me how to install/run it. Nothing troubleshooting if an issue should arise. Read the Loki thread, or Dr. P's tutorial...everything anyone needs to know about Loki is there. Yours...not so much.
Hey, all I need is a "no-answer" answer from the poster and that's enough for me to hold back.
Prislav said:
mfrazzz
I with you agree, but...
I shall be immodest - please read ALL my messages ;-)
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
Click to expand...
Click to collapse
Very irresponsible attitude,don't post if you are not sure what it's all about,but if you post than have the courage to standby it.
i tried on my friends wizard not mine.. .copy alll those files on wizard.. and click spl.lnk..and see the difference...
zabardast_1 said:
Very irresponsible attitude,don't post if you are not sure what it's all about,but if you post than have the courage to standby it.
Click to expand...
Click to collapse
Very true!!
IF, you check his entries, other posts like this one have been made in other device sections. Now how all the mighty guru's here have somehow overlooked this ability, and he has manged to make it happen...
When a dev here releases something, it is does with so much info that if something does happen, a person KNOWS it can be fixed. To say:
Instructions are not present because I do not wish to be responsible for another's nonsense. To whom it is necessary that will understand.
Click to expand...
Click to collapse
Tells me this person really gives a sh*t less about whether or not my usage helps or kills my device. Real nice attitude there...makes me really confident about using the linky.
And to the poster above...you feel so confident about it that you tried it on a friends wizard??? If it does work, as you say, please give us more details about it...since we have none really.
Until we see some directions as well as a bit more transparency from the OP, I'm removing the link. OP, please PM me when you have fulfilled those requirements.
jwzg said:
Until we see some directions as well as a bit more transparency from the OP, I'm removing the link. OP, please PM me when you have fulfilled those requirements.
Click to expand...
Click to collapse
Thank you.
I certaily wasn't about to take the risk, especially with the attitude from the OP.
Again, thanks.
Guys dont bombard like this , Prislav has always presented raw content like this in Prophet forum also. Maintaining the terminology, just see diagram, might be useful- simple
But im not favouring any one. please!
I force nobody. Do not want, it is not necessary. To me it is not important.
Well this thread seems nice and hostile .
Unless I am missing something all Prislav has done is to use JumpSPL by Pof (Nice WinCE Tramp by the way ) to fire off a patched G3 SoftSPL and from there let you launch into the ROM update routine.
Prislav’s post may have been a little short on details but there is plenty of info on the board and in his previous threads on the subject. Pof's JumpSPL thread is also a goldmine of info.
Prislav also seems to have been kind enough to provide a patched 'flashable' SPL for G3 devices.
I have not tried this yet (my G3 junkers are at home, so I will tonight) but looking at the dumps of the files and the steps that Prislav has gone through I think this should work.
The SoftSPL seems to contain nothing dangerous and I test launched it on a G4 I have on my desk to no adverse affect (in fact it did almost what I expected, not sure it is putting the device into the correct 'wait for USB' state mind you but it does answer to prods from MTTY ).
Looking at the way the file is patched (and my limited knowledge in this area may let me down, I am more of an ARM Linux hacker) is very interesting. It also looks very much like this could be wrapped into a SoftSPL flashtool that just soft patches a G3 before flashing (and also gives users a choice to flash a HardSPL if wanted, just like we do with G4’s and most modern HTC devices).
Ok,
Just an update to my last post,
I found an old G3 with a broken keyboard under my desk. IPL/SPL 2.17, ancient radio and AKU2.
SoftSPL via JumpSPL from Pof/Prislav seems to work fine .
Converted the Hard-SPL.nb to an nk.nbf (with just the SPL in it).
Flashed the resulting nk.nbf.
Device is now running a patched SPL (2.H4).
Just upgraded device to WM6 from an off the shelf ROM (had Jag 4.0 handy) using the usual NVID update tool.
The end result is an old, unhacked WM5 G3 upgraded to WM6 in a matter of mins.
Download: I will edit this post when I get home and have had a chance to upload the files to my site. - Stuck at work right now.
Edit @ 22:00, 17th Jan: Download is now up here. Use with care and don't come crying to me (or Prislav ).
HowTo: Install PatchedSPL on a G3 Wizard (or just run a SoftSPL if you flash another OS ROM at step 7 with the included flash tool).
Warning: I have only tried this with 2.* IPL’s/SPL’s, I can’t be sure it will not brick devices running 3.* or 1.* IPL’s/SPL’s. It will be a few days before I can test this so if you have a 3.* or 1.* bootloader I would suggest you leave this well alone. Do not try this on a G4, there is no point and you may well brick it .
1: Install latest ActiveSync (If you’re upgrading from WM5-6 your going to need it)
2: Download the rar from my website.
3: Copy the contents of the “Copy to root of G3 Wizard device” folder to the ROOT of your Wizard using ActiveSync.
4: From File Explorer run the SPL shortcut from the root of the device.
5: Wait for the screen to go white (you are now running a patched SoftSPL running from RAM),
6: Unplug and reconnect the USB lead to the PC (you can check the connection with MTTY if your so inclined).
7: Wait a few seconds and start the ROM upgrade in “Flash-WizG3-PatchedSPL”.
If all goes well this will work just like a normal ROM update (without anything shown on your Wizard’s screen) and your device will reboot after a few mins.
Check the version of the SPL running, if it is SPL version 2.H4 all should be fine and your now running a CID unlocked device that can take any Wizard ROM.
John
What's the difference between CID unlock(using LokiWiz) and this proceudure (Hard Spl)?
AldoWeb said:
What's the difference between CID unlock(using LokiWiz) and this procedure (Hard Spl)?
Click to expand...
Click to collapse
To be honest, very little. Both leave you free to flash a ROM of your choice .
This just uses the same 'methods' as used with newer HTC devices and the G4 Wizards.
It will also be easy enough to wrap with ROM's to create 'G3' SoftSPL upgrades that flash to any G3 device without messing about. Just grab the installer, drop your nb.nbf of choice and run the upgrade.
I'll try and bundle up such an installer tonight if I get time.
Hmmm, why do I feel like I have hijacked this thread .
John
So You mean:
You can Create such an installer than given a certain NBF (OS) does even the CID unlock itself.
It would be great
Aldo
I just got my new Cingular 8125/Wizard last week from my friend and found out about XDA developers and was intrigued with what I can do with my new device. I figured out how to flash the new WM6 onto my phone to replace the laggy WM5. Now that I have had this ROM for long enough, I'd like to change to a new ROM that I've found. Also, this new ROM is a different version of WM6. I don't know if I'm supposed to downgrade first or just start loading a new ROM on? If I am supposed to downgrade, how do I do it and what is the best program to use. Thanks in advance,
Brock
Start in the Wizard wiki (check link on top of page) where you'll find a lot of info to help you know your device; there are two generations of them. You can also get my tool - WST (check my signature) which will also help you.
Also pay attention to the stickies as they have valuable guides
good luck and welcome
mestrini said:
Start in the Wizard wiki (check link on top of page) where you'll find a lot of info to help you know your device; there are two generations of them. You can also get my tool - WST (check my signature) which will also help you.
Also pay attention to the stickies as they have valuable guides
good luck and welcome
Click to expand...
Click to collapse
Thank you. I have a G4 Wizard by the way. I looked through a lot of forums and through the Wizard Wiki and couldn't find how to flash a new ROM after on WM6, only on how to flash from the original WM5. I looked at WST and I'm a little confused. I'm not sure what it is or how to use it? Also, my phone is CDI unlocked. Also, what is the program WizardLove and what does it do? I see all the talk about it and I don't understand it.
No. You don't understand (or you didn't look carefully).
G4 Wizard CANNOT be CID unlocked with free software.
Head to the G4 subforum and look the stickies carefully,
First flash with your original carrier ROM, then use either SoftSPL or HardSPL to flash another version of WM6.
starkwong said:
No. You don't understand (or you didn't look carefully).
G4 Wizard CANNOT be CID unlocked with free software.
Head to the G4 subforum and look the stickies carefully,
First flash with your original carrier ROM, then use either SoftSPL or HardSPL to flash another version of WM6.
Click to expand...
Click to collapse
Ok what I meant is I flashed the HardSPL onto my G4. I'm on Cingular so what exactly is my original carrier rom and where do I find it? I already used HardSPL, do I need to do it again? Thanks again for everyones help. After I get this once, I won't have any more trouble
bropark08 said:
Ok what I meant is I flashed the HardSPL onto my G4. I'm on Cingular so what exactly is my original carrier rom and where do I find it? I already used HardSPL, do I need to do it again? Thanks again for everyones help. After I get this once, I won't have any more trouble
Click to expand...
Click to collapse
Ahh, you should have started by saying that you already knew what device you have and that already applied the HardSPL patch
Now, as long as you flash "G4 safe" ROMs (without IPL/SPL), you can try as many as you'd like. If you had used SoftSPL that would require to do it everytime you flashed a new ROM
cheers
I take no responsability in any damage on your device. If you're not sure what you're doing, take time to learn some basics from wiki.
This is the process to restore your Rhodium (TP2) back to the stock ROM and SPL. This should be enough for you to warranty return your device.
I have "borrowed" all of the examples from various sources on xda. Many thanks must goto jcespi2005 and JugglerLKR who created the guide and packages for the Raphael from which the majority of this is taken. The SPL "relock" procedure was taken from the Hard SPL thread. Credit to cmonex .
Prerequisites
The Rhodium Kitchen version 0.1 (Open the Zip File and read the password from the !!!readmefirst!!!.txt)
WinRAR or 7zip
RhodiumSPLRelocker_079SPL.zip
nbImg v1.1
Warning
avast! home detects buildOS as a virus, I've personally used it on my machine with AV off, and am not infected, but it's up to you.
Overview
You must follow these instructions in the order given. Once you have the Stock SPL you cannot flash any ROM's except the ones that are signed by HTC. For that reason you must restore the ROM first, then the SPL.
Step 1 - Get your Orginal ROM.
If you can find your Carrier's / Supplier's ROM on this wiki page or on their website. Please jump ahead to Step 4 - Flashing back to Shipped Stock ROM.
If you cannot find your ROM on the wiki then download this ROM : RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe and proceed to Step 2 - Dumping your phones ROM.
Step 2 - Dumping your phones ROM
First you need to Dump the ROM from your Phone. Follow the instructions in this thread [TUT] Dumping an Rhodium ROM / SPL to obtain 4 *.raw files.
N.B: Although it might seem obvious to senior members, you must dump the ROM from your device before you flash it. If you have flashed another ROM to your device, then your orginal stock ROM is lost. You have 2 options, wait and see if your carrier will release one, or beg someone else with the same device to dump their ROM and share the *.raw files.
Step 3 - Reconstructing the ROM
-3.1: Extract the Kitchen to a Folder on the root of your PC (C:\, D:\, etc).
-3.2: Open the RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3.44.25.27_Signed_Ship.exe file with WinRAR or 7Zip and extract the ruu_signed.nbh file and place it in the BaseROM folder of the Kitchen.
-3.3: Place the Part01.raw (XIP) and Part02.RAW (IMGFS) in the BaseROM folder of the Kitchen.
-3.4: Run RhodiumKitchen.cmd in the Kitchen.
-3.5: Enter the following options into the Kitchen:
-3.6: e, b (for Dumped ROM). Press [Space] once complete.
-3.7: c, a (for Cooking a ROM).
-3.8: Press the "Play" button in BuildOS and wait for it to complete.
-3.9: Close BuildOS, Close PagePool Changer and Press [Space] to goto the main menu.
-3.10: You will now have a Flashable NBH file. Press f to Flash.
Now goto Step 5 - Removing Security Unlock
Step 4 - Flashing back to Shipped Stock ROM
If you were lucky enough to find a shipped ROM on the wiki or your carrier's / supplier's website, then just run the "ship exe" and follow the on screen instructions.
Step 5 - Removing Security Unlock
If you have purchased the SIM/CID/Security unlocker by Olipro, you can re-lock your device using the following tool : http://hpcmonex.net/htc/secrelock.zip
Step 6 - Restoring the Splash Screen
This is only needed if you couldn't find your Shipped Exe. If you have your Shipped Exe, you get the splash with it.
You're best creating a seperate folder out side the kitchen for this.
-6.1: Find a shipped exe from another WVGA device (HD or TD2).
-6.2: Extract the ruu_signed.nbh from the Shipped Exe using WinRAR or 7Zip.
-6.3: Use NBH Extract (in the Kitchen\Tools Folder) on ruu_signed.nbh
-6.4: Delete all files, except 01_MainSplash.nb.
-6.5: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb -w 480 -h 800
-6.6: Delete 01_MainSplash.nb.
-6.7: Use nbImg.exe as follows: nbimg.exe -F 01_MainSplash.nb.bmp
-6.8: Use HTCRT in the Kitchen\Tools to make a NBH file from the 01_MainSplash.nb.bmp.nb file.
-6.9: Put the new NBH file and copy RhodiumCustomRUU from Kitchen\Tools into an empty Folder.
-6.10: Run the RhodiumCustomRUU.exe to Flash the Splash.
Step 7 - Flashing back to Stock SPL
-7.1: Ensure you already flashed stock ROM and Radio, because stock SPL flash is always the last step before sending the device in.
-7.2: Extract the relocker zip and run the EXE on your PC.
-7.3: If you wish to replace RUU_Signed.NBH that got extracted, feel free to do so, but not necessary (this Hard-SPL will only allow overwrite with a SPL signed by our custom cert). The included one is the 0.79.0000 stock SPL.
-7.4: Flash the Stock SPL
-7.5: Verify if it flashed by checking version in bootloader screen, it should say 0.79.0000, not 0.85.OliNex.
Credits:
-jcespi2005 and JugglerLKR for the Kaiser and Raph Kitchens
-Olipro and cmonex for Hard SPL and Security Unlocking
-pof for nbImg
-Everyone in the Readme.
Reserved
(P.S. I've been writing this in another forum for a few days, hence the Thread Date of the 15th - so this is a bump )
Dave
Did the same thing
Used the Ralphael Kitchen, changed the settings to Rhodium added some settings for Rhodium. used a signed Tmobile US Rom.
Nice Tutorial
Sorry, Dumb Question...
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
D_monie3 said:
-MOD EDIT: Removed Full Quote
I have found my stock ROM, so I can continue with flashing back to stock, but where do I find the stock SPL?
Click to expand...
Click to collapse
It's the RhodiumSPLRelocker in the Prerequisites or download it from the Hard SPL thread.
Ta
Dave
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
sleonard said:
First, thanks for this. I write a fair amount of documentation of my work as a network admin so I know how time consuming this is.
cdguider has been kind enough to dump and reconstruct the TMoUS ROM so I don't actually need to do this (although I may just for the exercise) but I do want to start learning how to modify this ROM to suit my own needs. Is there a guide up that will get us newbies started on using the kitchen? Hopefully one that explains in detail what each of the kitchen tools are and what they do as well as how the Rhodium ROM is constructed. I prefer to understand what I am doing versus following recipe steps. For example, My Hermes ROM was partitioned into the ROM and an extended ROM where carriers could put their installers. Does the Rhodium have an ExtROM?
OK, back to the search tool.
S
Click to expand...
Click to collapse
No it doesn't.
For help with this Kitchen, see _Alex_'s cooking guides on the wiki for the Kaiser. That's where I started reading and then I just kept going, download kitchens published by other chefs and see how they put stuff together. There are two main types buildOS (like this one) and PRB that uses bepe's platform rebuilder - ervius's visual kitchen is based on it.
Thanks
Dave
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
matttytn2 said:
i reconstructed the uk orange stk rom all ok very good guide thank you!
i had to do this because i lots the hard reset it just flashes up no immage then back to boot loader i though stock rom would resolve this i rebooted it and still have no hard reset still says no immage boo boo whats going on is it due to the ruu i am using i thried the rhodium one and the v1.1 one what ever it is i also tried dave's wrapper and a kaiser on out the kitchen tools all same results so i guess not any ideas ppl!?
Click to expand...
Click to collapse
So you are stuck in the bootloader?
What does it say in the bootloader?
Ta
Dave
Sorted it i am such a fool i was doing the wrong button combo!!!!!!
This is fantastic i am now going to have a play at cooking up my own i know i can do this now i will get my head down and work this stuff out i mite have my first rom by xmas
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
leeneo said:
question about step 3.9
"Close BuildOS, Close PagePool Changer and Press [Space] to goto the ."
how can i close PagePool Changer ? it doesnt work.....
and ,which "main menu" i can goto?
Click to expand...
Click to collapse
Just click the [X] in the top right.
Pressing space will take you to the first set of options that the batch file offered you.
Thanks
Dave
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
leeneo said:
leeneo said:
:12
:12.PagePool.Changer.bat
tools\xvi32\xvi32.exe RUU_signed.nbh
GOTO :EOFQUOTE]
this code in RhodiumKitchen.CMD
but , i cant find PagePool.Changer.bat ........
Click to expand...
Click to collapse
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
DaveShaw said:
leeneo said:
That's a label in the batch file .
Search for it in the RhodiumKitchen.CMD and see what's called from there.
P.S. I don't have this kitchen on this computer so a lot of guess work and memory on my part.
Dave
Click to expand...
Click to collapse
ok , i see ..
you kind-hearted ! thx
Click to expand...
Click to collapse
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
joshkoss said:
yea thanks for the thread dave, When i use these tools to do up my own splash it chops off at the bottom... is there a patcher out yet to fix this?
Click to expand...
Click to collapse
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
saymyname said:
thx for the tutorial , how can i take new xip/sys and replace the existing?and how can i remove and add prgorams?
Click to expand...
Click to collapse
Porting isn't simple, have a look for some tutorials on using BuildOS and porting.
Adding and removing programs, to add, just create OEM packages, to remove, just remove them.
Have a look at _Alex_'s cooking tutorials on the Kaiser Wiki.
Dave
DaveShaw said:
Yes, but I can't recall where I saw it . It's not for the TP2 though, maybe HD or TP.
Dave
Click to expand...
Click to collapse
yep the tp one has no affect on our splash unfortunatly. i've already posted in theyre thread askign they make it compatible. but just wonderin if you came across anything about this is in your many travels.
Question
Hi everyone ...
First of all Thanks alot for this Tut Dave awesome work.
I dumped my Stock Rom from a unbranded O2 TP2 and rebuild it.
For Cooking i used the signed_ruu from RUU_Rhodium_HTC_Europe_1.19.401.0_Radio_Rhodium_3. 44.25.27_Signed_Ship.exe
It did everything like described and i've got a
signed_ruu.nbh (1.19.207.1) newest o2 Stock Rom.
Should be fine right?
Do i also need to do Step 6 so creating a splash screen?
If anyone needs this rom drop me a message ...
Hi, can you help me with how to remove the Hard-SPL to upgrade to the original ROM for HTC Touch Pro 2. I'm from Bulgaria, the phone is not locked to an operator (AT & T Orange), etc. What files will I need and how. I also want to download the original Rom from the site of HTC. Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=550131
All info you need is here.
One note from my experience: first downgrade to original rom then install original spl. I had an issue, it was bricked, but all it needed was to one more time upgrade original rom.
You mean that you must first install the original Rom (I could not download it from HTC's site can help you). And then correct me if I'm wrong:
First you say to install the original ROM.
2nd to download RhodiumSPLRelocker_079SPL.zip unzip it and run. Exe
3rd Stock_SPL_Restore_084.zip to download and in the same way as putting a new ROM to choose it (unzip it first)
Do I need to do Hard Reset at any time? And maybe a little help otkade to download original ROM.
I did this from the link you gave me in boot loadera get out this Oninex, then I load again ROM-a which had previously tried to put my original and gave me an error
The instructions say to flash the stock ROM before you re-lock SPL.
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
ivailo0 said:
I have failed to: (i already made a re-lock SPL ... now what to do: (
I am still with Energy ROM, which I had to do before re-spl .. in boot loadera now I do not go Olinex 0,85 as before ... what to do?
Sorry for my bad English!
Click to expand...
Click to collapse
i don't think you can re-lock your phone with custom rom on your phone but what you do is hard_spl it (if spl re-locked) then
task 29 ----> install stock rom ----> re-lock spl
good to go
Isteglih his RUU_Rhodium_S2_HTC_Europe_2.07.401.1_Radio_Rhodium _4.49.25.91_Signed_Ship
this is the right Stock Rom correct me if I'm wrong. Inastaliram it and to 0% gave me an error. - 294 Invalid Vender ID.
But it's not e what I need.
I'm not too far into things ...
Please help, now I can not get no ROM, and this olinex do not write anymore. and gives me an error any attempt to put the new ROM. Now when I work under the Energy ROM ...
Hi
Before flashing another rom, please use the tool called task29. get it here http://forum.xda-developers.com/showthread.php?t=649191
Check here for another rom for your device http://rapidshare.com/#!download|33...dio_Rhodium_4.49.25.17_Signed_Ship.exe|180171
or here http://shipped-roms.com/index.php?category=windows mobile&model=Rhodium
use the SPL relocker tool LAST
Good luck!
Hello, thank you for the help you gave me, but I think we still have a problem (task29). Do the following:
1 - http://forum.xda-developers.com/showthread.php?t=649191 here I lost my task29.zip.
2 - unzip it, inside there was task29, had ROMUpdateUtility.exe. ROMUpdateUtility.exe and opened as follows next .. next .. me and sticks to 0%.
In the above post I mentioned that yesterday I did relock SPL before I know that I need to do this first (I do not write now in olinex boot loadera). I think from there
:-( you're in bad way. look for some help here http://forum.xda-developers.com/showthread.php?t=550540
The solutions mentioned above will NOT work, because you don't have hardspl installed.
Flash Hardspl again and then restore to stock rom and spl.
Guessed for it, but waited for someone to tell me. I will use this thread http://forum.xda-developers.com/showthread.php?t=550131 and you will get new and will write what happened. Thanks!
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
This is what i told you to do in Post #7 ..... i guess you didn't read it at that time but anyways glad to know your problem is solved
You are right. Thanks again
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
Bravo! so you how many of your fingers still have finger nails? lol
Baptism by fire, eh? Nice time.
ivailo0 said:
I made myself a new Hard-SPL. After I did task29. After you've installed the new ROM. After I did Relock-SPL. Now everything is OK.
Many thanks to all who helped me!
Click to expand...
Click to collapse
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
jfandl said:
How did you MAKE a new HardSPL ? When I did this mistake, I had to buy another HardSPL to unlock it because the license I had for the first time was already used up.
Click to expand...
Click to collapse
he already had the same phone Hard-SPLed. the license works for the same phone forever. a different phone is different.