Related
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
Click to expand...
Click to collapse
I would be very thankful if you could post a link or send me the ROM upgrade Utility needed
best regards
Bayardo
risidoro said:
I3aYardo said:
Hello everybody !!
I just spent about 28 hours reading the threads in order to change my GERMAN O2 XDA MINI S (Wizard) ROM. Into an english one.
For that matter I know I need to unlock my CID, but since i have the latest ROM installed, IPL 2.21.001 and SPL 2.21.001 Lockwiz won't work !!!!
so I tried to Downgrade my Rom in order to make the Lockwiz work, but I am not able to find a suiting German Rom anywhere on the Net.
So I was wondering if nebody would be kind enough to tell me where to find and older German ROM or how I can avoid DOWNGRADING and simply unlock my CID
best regards ... Bayardo
Click to expand...
Click to collapse
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
phone_one said:
Hi risidoro,
I am trying upgrade my O2 German Wizrad G4 version into WWE, I followed your instruction & has used nb2nbf to compile a 2.xx rom without IPL & SPL. When I used the update utility to falsh the Wizard, the utility said something like: Error, this update utility is not for your device. etc.
I think I need to used your modified update utility , can you send it to me?
Also my other question is, when I use nb2nbf , what should I put in the model id for my German Wizard?
You advice can help me & many others to solve our headache in upgrading a G4 Rom! Cheers!
Click to expand...
Click to collapse
The modified RUU (ROM Update Utility) is attached.
For ModelID you can use both WIZARD or Prodigy (i used the former).
risidoro said:
Since you have a G4 boot chip (the tailing .001 in IPL and SPL tells that) you CANNOT downgrade your ROM to 1.x version.
DO NOT TRY INSTALLING A 1.X ROM: YOU'LL BRICK YOUR PPC!!! DO NOT FOLLOW FARIA's PROCEDURE TO CID UNLOCK 2.X PHONES: IT WON'T WORK IN YOUR CASE ('cos you've got a G4 boot chip).
This means that you will NOT be able to CID/SIM unlock your phone with lokiwiz 0.2b (however you can still use lokiwiz 0.3a to SIM unlock it, but no CID unlock).
But don't despair, you CAN still change your phone language and install whatever 2.x rom you like. The procedure to follow, however, is a bit different: you cannot simply download a rom you like and install it, you'll need to hack it a little first, but the results will be the same!
Basically, all you have to do is get the ROM you like (only 2.xx ROM!!!) and remove from it the IPL/SPL part. Then, you have to flash this 'hacked' rom using a slightly modified ROM Upgrade Utility (i can provide it to you if you want). With this method you're not going to replace the IPL/SPL (bootloader) of your phone so you don't need to CID unlock it (which, at the time i'm writing, is impossible).
To remove IPL/SPL from your ROM you have to extract the file nk.nbf from the ROM and get its content with typho5 tool (search this forum to have more info). Then you have to reassemble a new nk.nbf using nb2nbf. The new nk.nbf, of course, must NOT contain the IPL/SPL parts.
If you prefer, you can tell me what ROM are you interested in and i'll do the dirty work for you. Just let me know.
Bye
Click to expand...
Click to collapse
sorry to hijack your thread,
just wanted to ask a short question.
if my info is as below:
US T-mobile MDA Vario
IPL 1.03
SPL 1.06
GSM 01.12.10
OS 1.3.13.5
ROM version: 1.3.13.5 ENU
ROM date: 9/29/05
Radio version: 01.12.10
Protocol version: 4.0.13.23
ExtROM: 1.3.13.116
OS 5.1.70(build 14406.1.1.1)
Click to expand...
Click to collapse
does this mean that its on a G3 chip and that i can use lokiwiz03a to CID unlock it and upload any 2.x ROM as i please? and downgrade the ROMs too?
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
I've just published a tutorial that can help those with a G4 or G3 (>= 2.21) CID-Locked device to install whichever 2.x ROM they like.
The tutorial is here:
http://forum.xda-developers.com/viewtopic.php?t=56088
Bye
risidoro said:
@Bola: you have a 1.x ROM so you can CID unlock your phone with Lokiwiz0.2b (NOT 0.3a). Then you'll be able to install whichever ROM you like.
Bye
Click to expand...
Click to collapse
thanks risidoro.
i'll give it a go later.
there wont be any issue downgrading the ROM later would there?
eg if i were to install:
RUU_Wizard_2211301_22113102_021911_DOP_ASIA_WWE_Ship.exe
Click to expand...
Click to collapse
and later back to
RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe ?
Click to expand...
Click to collapse
oh, the bootloader (IPL/SPL) doesnt get upgraded either when i upgrade, would it?
oh thank for the help risidoro.
i saw your post after i uploaded mine.
read through your tutorial and i figured that both IPL / SPL will get updated
people like you makes this site great
thanks once again.
Offcial Rom from Dopod (Dopod D810)
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
does this new rom support Gps???
vdias said:
does this new rom support Gps???
Click to expand...
Click to collapse
still not supported
Thanks for the rom, moved to safe heaven:
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Be careful when flashing CID locked devices, this ROM has higher bootloader version: 1.07.0000 Shipped
Most probably this version will enforce CID checking.
pof said:
Thanks for the rom, moved to safe heaven:
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Be careful when flashing CID locked devices, this ROM has higher bootloader version: 1.07.0000 Shipped
Most probably this version will enforce CID checking.
Click to expand...
Click to collapse
I thought so too. It certainly won't work on mine since it is an HTC and not a Dopod. I wonder if we could use the same novenderID installer used with the Prophet and just install extracted the files? I suppose the trinity could need a new version. What do you think?
pof said:
Thanks for the rom, moved to safe heaven:
ftp://xda:[email protected]_WWE_1.17.707.3_6275_1.24.00.11_107_Ship.exe
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
Be careful when flashing CID locked devices, this ROM has higher bootloader version: 1.07.0000 Shipped
Most probably this version will enforce CID checking.
Click to expand...
Click to collapse
do we have some sort of bootloader downgrade o noid solution ?
thanks
It's not possible to do a _noID utility for Trinity AFAIK. CID is checked by bootloader, and rom upgrades use NBH format.
pof said:
It's not possible to do a _noID utility for Trinity AFAIK. CID is checked by bootloader, and rom upgrades use NBH format.
Click to expand...
Click to collapse
Very very bad......... now only dreams about SuperCID
pof said:
It's not possible to do a _noID utility for Trinity AFAIK. CID is checked by bootloader, and rom upgrades use NBH format.
Click to expand...
Click to collapse
This news is very depressing. That means that people with an HTC device will never be able to use Dopod ROMs or cook up new ROMS, for instance the GPS enabled? That's no fun. Maybe we just have to get the Trinity unlocked?
yes, you need to cid unlock it to do such thing. Is exactly the same thing as happens with hermes.
pof said:
yes, you need to cid unlock it to do such thing. Is exactly the same thing as happens with hermes.
Click to expand...
Click to collapse
Use TyTn utils for unlock CID very dangerously!
because, for CID unlock it is necessary downgrade SPL to 1.04 (by default bootloader 1.06)
Sorry for my English
lvsw said:
Use TyTn utils for unlock CID very dangerously!
Click to expand...
Click to collapse
I didn't mean to use Hermes CID unlocker on trinity, that would definitely brick the device because it flashes a wrong radio.
You guys need to work together to develop a method to CID unlock the trinity, but this will take some time, first you have to gather info about the device and post it in the wiki... bootloader part is most important.
Hi, anyone has used this new ROM from dopod? What are the changes? I was not able to find any release notes.
How can i know if my device is CID locked?
has anyone extracted the extended ROM from the Dopod D810 handset?
I would like to have a sneak peak into anything that might be useful for the hermes.
thanks in advance
Ronny
1)how can i tell if my device is htc or dopod?
2)how can i tell if i have a CID locked device?
bootloader command 'info 2' will answer both questions
Can someone summarize the CID locking for someone unfamiliar (or point me to a thread to read)?
I have an HTC-branded, unlocked Trinity that I want to keep up to date.
@mikesol:
http://forum.xda-developers.com/showpost.php?p=1051363
Hope that helps
pof said:
bootloader command 'info 2' will answer both questions
Click to expand...
Click to collapse
HTCSHTC__001‰øð'HTCE
ok, i guess i have a htc device and not dopod.
now, concerning the cid locking, i cannot understand whether it is locked or not!
thanx in advance
OK, new version of Hard-SPL, this one is based on an MFG; seems HTC popped a stealth CID-check process in this, bastards, found and patched it anyway though.
Code:
[b]CURRENT FEATURES[/b]
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-rtask commands enabled
-lnb command enabled
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.30.Olipro
[b]Version 1.30:[/b]
-Fixed SPL protection bug
-rtask commands enabled
-based on an MFG SPL
[b]Version 1.20 - initial release[/b]
-Initial version; has all features except those in newer version
Download below, enjoy!
Awesome, looking forward to it! ****wit-proof TM
Great work Olipro but is there any away to unlock the rtask b command??
Like the 1.01. mfg spl??
Cmd>rtask b
Command error !!!
Click to expand...
Click to collapse
Thank's for your great work...
ausdim said:
Great work Olipro but is there any away to unlock the rtask b command??
Like the 1.01. mfg spl??
Thank's for your great work...
Click to expand...
Click to collapse
it might be possible, that's something for future thought though, if it can be done, then I will.
Olipro said:
Ok, well, since Hard-SPL has been released for Hermes, I've ported the same features over to Trinity;
Code:
[b]CURRENT FEATURES[/b]
-SuperCID
-no file signing required
-no password required to authenticate with bootloader
-bad NAND can be recovered with "task 2a"
-bad NAND can be recovered by flashing an OS.nb
-SPL protected from all HTC retail SPLs being flashed by accident (to bypass, use SSPL)
-bad NAND can again be checked for with "info 8"
-version displays 1.20.Olipro
Download below, enjoy!
Click to expand...
Click to collapse
Thanks!!!!!!!!!!!!
thanx ....
so basically i run the romupdate utility without transfering anything to my p3600, the once its in bootmode just run the regular htc update?
Hajaz said:
so basically i run the romupdate utility without transfering anything to my p3600, the once its in bootmode just run the regular htc update?
Click to expand...
Click to collapse
yep, that's exactly it, once you have Hard-SPL, there's no need to bother with CustomRUU any more.
Great job man!!! Thanx a lot!
ps. lnb command was missed( It's too nessesary for me...I need often to reflash roms (via mtty it takse about 3 min)
How can i return original spl to make 1.01 MFG from it? Or can i make unlock procedure with your spl? Just want to know, coz i don't want to get bricked device.
mun_rus said:
Great job man!!! Thanx a lot!
ps. lnb command was missed( It's too nessesary for me...I need often to reflash roms (via mtty it takse about 3 min)
How can i return original spl to make 1.01 MFG from it? Or can i make unlock procedure with your spl? Just want to know, coz i don't want to get bricked device.
Click to expand...
Click to collapse
what the ****ing hell are you talking about? 1.01MFG for Trinity? LNB command?
as for bricking your device... this is supposed to ****ing PREVENT IT.
Thanks for this, man. Appreciated. I'd give you money if I didn't have rent to pay
Olipro said:
what the ****ing hell are you talking about? 1.01MFG for Trinity? LNB command?
as for bricking your device... this is supposed to ****ing PREVENT IT.
Click to expand...
Click to collapse
why are you so agressive?
im talking about mfg spl for trinity. i see you don't know anything of it.
when i used imeicheck unlocker i got this spl.
and i use lnb command to flash os.nb via mtty.
i have only one question how to return original spl? just flash whole original rom?
btw, my battery drains very quick with your hard spl.
mun_rus said:
why are you so agressive?
im talking about mfg spl for trinity. i see you don't know anything of it.
when i used imeicheck unlocker i got this spl.
and i use lnb command to flash os.nb via mtty.
i have only one question how to return original spl? just flash whole original rom?
btw, my battery drains very quick with your hard spl.
Click to expand...
Click to collapse
hah, that's a funny one... maybe it's the ultra secret battery draining routine I coded into it... honestly, what a ****ing stupid comment.
mun_rus said:
ps. lnb command was missed( It's too nessesary for me...I need often to reflash roms (via mtty it takse about 3 min)
Click to expand...
Click to collapse
Takes the same time to flash an OS in NBH with non-MFG bootloaders if you put only an OS in the NBH file.
mun_rus said:
How can i return original spl to make 1.01 MFG from it? Or can i make unlock procedure with your spl? Just want to know, coz i don't want to get bricked device.
Click to expand...
Click to collapse
If you run imie-check's unlocker again you'll have 1.01 again, but this will remove HardSPL from your phone.
mun_rus said:
how to return original spl? just flash whole original rom?
Click to expand...
Click to collapse
Put the SPL you want to load in a NBH file (header type 0x200 for trinity SPL) and flash it using SSPL, this will overwrite Hard-SPL.
If you flash from bootloader Hard-SPL will not be overwritten.
mun_rus said:
btw, my battery drains very quick with your hard spl.
Click to expand...
Click to collapse
As oli said, this is non-sense... will drain the same with retail's HTC 1.07 spl.
pof, thanx a lot for your reply and help.
just knew a litle about spl's...
@Olipro
thanx for your job once more. my comments were really stupid, sorry
On contrary, 1.01 MFG is likely to be drawing more power, successors are better optimized for power conservation.
What would I need this for?
I'm really baffled. I've got my device SIM and CID unlocked, thanks to pof, and installed the latest HTC Rom...
But what is all this for?
Would appreciate it if someone could explain.
Thanks in advance.
D.C
Dead Cell said:
I'm really baffled. I've got my device SIM and CID unlocked, thanks to pof, and installed the latest HTC Rom...
But what is all this for?
Would appreciate it if someone could explain.
Thanks in advance.
D.C
Click to expand...
Click to collapse
well, mainly to allow you to flash unsigned ROMs to the device without Soft-SPL. and secondly to allow you to recover the device if anything gets ****ed up during a flash... such as the radio, or the OS.
Thanks Olipro for your efforts, very nice one!
Thanks Olipro.
Can I just download the file and just install it? Will it change anything on my device? Bearing in mind that my device is CID unlocked.
Thanks
D.C
Hi Guys,
I have just found the (newest) ROM for my Mteor (RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar) But I dont have ANY experience flashing my device with new ROMs
Should I just install this ROM and see what happens or do I have to make some extra actions to get this ROM properly installed?
Could anyone please help me (in a N00B language) to get my device updated?
I saw that some versions of the IPL (?) en SPL (?) makes differences, but I don't know what versions I use. What versions of IPL and SPL should I have?
THNX!
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
futureshock said:
the original shipped rom updates depends on your device...
there is a "Code" called CID in the background...
with that upgrade you talking about you can flash only orig. HTC Devices (CID = QTEK_Z12) russian devices have QTEK_A07 ....
you can find that out when you connect with the term tool mtty for example...
but you could also try easiely flashing the shipped upgrade... when all works fine... if you have another cid there will be an error that you cid does not match... then you have to find a matching shipped upgrade..
if you want to flash a upgrade that not matches your cid you have to use sp3devs, DEV SSPL (have to use customRUUpdater) or his 77.7 SSPL (you can use orig. Shipped Updater)
i recommend that you first flash the latest orig. shipped update (1.34/1.38er Radio) after that you have to App unlock the device and then go on with WM6.1 ROM!
Click to expand...
Click to collapse
Alrighty!!!
I shall keep you informed about my progress. (first try to flash my device only using the original ROM)
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
DaLuca said:
I did it... JOEHOE!!!
The Rom only did not work... so I downgraded te SPL (?, via this forum) After the downgrade the Rom worked!!!
Click to expand...
Click to collapse
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
jerpelea said:
how did you downgrade the SPL?
version 1.10 is the new version from HTC (1.10>2.05)
version 2.05 is the old version from Qtek
BR
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
DaLuca said:
http://forum.xda-developers.com/showthread.php?t=319448
Read the third reply... This worked for me!
Click to expand...
Click to collapse
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
jerpelea said:
you did not downgrade the SPL you upgraded it
1.10>1.09>2.05
Click to expand...
Click to collapse
oh... hmm... okay... sorry! Thats why the topic-title is "Rom update for a N00B"
But thanks that you cleared this question.
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
tehCORE said:
I've been reading the wiki, but either it was not clear enough or i am dumb enough (^^)
can anyone pls clarify me? does SoftSPL need to be loaded on every system startup or just only on rom upgrade?
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
since OliNex (uber pro ty dudes) are developing a HardSPL is it possible to port/transform/whatever to SoftSPL?
best regards
tehCORE
Click to expand...
Click to collapse
softspl aka sspl is only used for flashing spl's. You can't flash a rom using a sspl. Why do you think the Hardspl is created???????
thought
sspl -> temp fix
hspl -> perm fix
With the softspl you flash the hard spl and then you flash a rom with it
tehCORE said:
it seemed to me a better choice to use SoftSPL instead of HardSPL to not void warranty.
Click to expand...
Click to collapse
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
cmonex said:
no. imagine the following case... your device has no matching shipped rom for it... you flash a rom via sspl... flash gets interrupted... YOU're STUCK!!!
and warranty isn't voided with hardspl, just reflash to stock SPL before sending it in...
Click to expand...
Click to collapse
oh did not know that, thanks for the enlightenment