Database Develop

missed upgrade

I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance

sailors_be said:
I just upgraded my QTEK 9100 with the latest RIsidoro rom and have now a 2.26 OS but...always an ipl 1.03 and a spl 1.03.0000.
The device hangs and I can't have any activsync runnuing to reflash to an other version. How can I recuperate my PPC?
Thanks in advance
Click to expand...
Click to collapse
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=282498
http://forum.xda-developers.com/showthread.php?t=284292

More info required.
When having problems with Rom Upgrades you really need to provide as much information as possible about your situation.
Please state the following:
What Rom did you have prior to upgrading, include IPL/SPL numbers.
Do you know if your device is G3 or G4 flash chip?
Is your device CID Unlocked?
Have your read (thoroughly) the instructions provided for the Rom you attempted to upgrade?
My initial guess would be that the Rom you flashed doesn't include IPL/SPL (as Risidoro clearly states in the Original Post (http://forum.xda-developers.com/showthread.php?t=276700)
In this case, you need to flash one of the Operator provided AKU 2.x Roms to get your IPL/SPL up to 2.x BEFORE you flash Risidoro's Rom to your device.

Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.

I'm going to give you some general info but you will have to do your own leg work to put this together.
The Wizard Wiki will contain some of the information you need:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Also see the stickied posts at the beginning of the Wizard upgrading forum.
I am assuming that your device is not properly CID Unlocked (although it may be doing it again will not harm your device).
First you will need to download an Operator Rom, I would suggest this one:
ftp://xda:[email protected]_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
as it is an official Qtek AKU 1.x Rom.
Second place your Device into Bootloader Mode (search on it) and run the update that you downloaded.
At this point you are pretty close to where you were when you started.
Now, CID Unlock your Phone! Use this thread:
http://forum.xda-developers.com/showthread.php?t=249474
If you have followed the instructions and everything went okay then you can now flash any of the Roms you (except one that are marked as G4 only since you appear to have a G3 Device).

sailors_be said:
Thank you for you reaction
Before flashing I had following situation
IPL 1.03
SPL 1.03.0000
GSM 1.410.0
OS 1.37.10
I didn't saw the thread wher it said that the isodoro flash wasn't a complete one. So I upgraded the device with this rom on the above config
After flashing with Isodoro I have same IPL and SPL no GSM anymore and OS 2.26...
I have no USB connection anymore, I supose I can not flash anymore. The device is extremely slow. The only rescue I see is eventualy to flash the device again with the mini SD.
Before I started the first flash I did a CID unlock. Actualy i don't now if it is locked again.
If tou need more info don't hesitate and thanks for helping.
Click to expand...
Click to collapse
Looks like you flashed a 2.xx rom with no bootloader into a 1.xx system.
First try a full 2.xx rom from a carrier (cingular 2.25 comes to mind) then reflash the rom you want. Be careful playing with the phone in the current state as the battery will drain and not re-charge. I had to have a friend charge my battery for me when I did this same thing.

many thanks
I followed the procedure you give and recuperated my phone.
Thanks a lot for the assistance.
Merry christmas and happy new year
Jean-Michel

FAIL upgrade to WM6 with IPL/SPL 3.08. T_T Pls HELP

I'm a newbie here. Please provide me the link or suitable Flash Rom for G3 Wizard O2 Mini S. My SPL/IPL is 1.03. I search for 1 day still cannot find it, thanks!

You wont find the ROMS itself anymore. Thanks to M$.
You can find a lot about good ROMs and customisations.
You should CID and SIM unlock your device, use the Wizard Service Tool for that
Then choose (WWE= English) and find the ROM you want (I use a modified official AKU 3.3, originally from T-Mobile Croatia)
Then Flash your device.

I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2

ahdu said:
I just succesful install WM5 English version, and with IPL and SPL 3.08. I try with install many kind of WM6 but nothing happen, still remain WM5. What should I do?
My O2 mini S info:
IPL 3.08
SPL 3.08
GSM 01.12.10
OS 1.5.4.2
Click to expand...
Click to collapse
It is likely that you did not CID unlock the device. Just look at the second post and the stickies in this forum.
kernelguy

Downgrade Locked G3 with 3.08 IPL/SPL

I have read the guides to unlocking and from what I see there are none that work on 3.xx SPL/IPL. I was able to downgrade the IPL but never the SPL.
I have seen several threads that say if you flash button rom (several times) it will eventually downgrade the SPL also, but all night as I worked I flashed the button ROM (about 12-15 times) and still can't downgrade the SPL from the 3.08, only IPL goes to 1.01
Tried the original Cingular ROM and it isn't accepted (I think because I have a higher SPL than the original 2.26), tried using the ShellTool, Tried SoftSPL too but none worked.
IS THERE A WAY TO DOWNGRADE THE 3.08 SPL SO THAT I CAN USE THE LOKIWIZ02 OR LOKIWIZ03. I saw a thred saying that 3.08 can't be downloaded but I also saw SEVERAL saying to just keep insisting with the Button rom that it will eventually work (but after almost 15 consecutive tries I've had it).
Any help would be GREAT.
thanks
MGF
IPL 1.01
SPL 3.08
GSM 1.12.10
OS 1.5.4.2

Button ROM doesn't work for that. I tried numerous times too. The only ROMs that work to downgrade to anything else from 3.08 are the OEM releases from either T-Mo or AT&T.
The Cingular ROM isn't accepted because it checks the OS version number. I had to try several peoples' ROMs until I found one with a low enough version number to where the Cingular ROm could flash on top of it.

Try to flash T-Mobile 2.26 to bring it down to ipl/spl 2,26 then go for button's 1.05,hope it'll do the trick.
Good luck
p.s. you can try the wizard_love_Rom also,lol

I want to downgrade my phone, too. but the original T-Mobile AKU2.0 say while reading the phones ROM-Version "only update"... so, with this no downgrade is possible.
How can i CID unlock with AKU3? I want to flash a new ROM from xda-developer as well... damn
Regards
Thomas

You could probably extract the nk.nbf and use the standard tools to flash it.
The nk.nbf can usually be found in a .tmp folder in c:\documents and settings\yourname\Local Settings\Temp

Thanx for your Hint... but which "Standard-Tool" should i use?
Sorry for this silly question, but i am new in experience with my vario

imate kjam
hello, i am new enterent on this forum and need help for, have imate kjam G3 IPL/SPL 1.xx os 1.1.9.3 device and i want to upgrade with latest WM 5 SE 3.8.2.1. Can i upgrade this OS without facing any prb i.e CID/sim locked prb??? kindly adivice to me what is the right way to upgrade my imate kjam (t-mobile) thank you.
best regards
farry

Unless you are using official kjam update, otherwise please CID unlock your G3 device first, or you will face problems.

thank u for advice, but how to CID unlock first before upgrade the rom, any tool for apply to unlock?? plz help
regards
farry

Upgrading IPL SPL to 3.08 i O2 MINI S from 1.05

Hi,
I have a O2 Mini S with black diamond 3.1 installed i would like to upgrade my IPL SPL from 1.05 to 3.08, I am asking this as some time back i had upgraded my radio rom to 2.71.xxx & had to reinstall the OS again after doing so..
any helps appreciated.
Thanks in advance

for me, the following worked:
- downgraded to WM5 AKU2 according to the description shown in all WM6 release threads
- updated the thing with the latest T-Mobile update
- re-flashed the OS partition (via pdocwrite.exe, you can use "shelltool" or whatever other names they gave for their wrappers). but the typho5/nb2nbf couple just does as well. only remember to leave out the unnecessary ipl/spl and not to flash the G4 one by accident. or leave out those entirely, it wont harm since you should already have a 3.08 SPL (and probably IPL) at that point.

Noob Question

Ok I need help. I just picked up a second-hand wizard from someone who claims to have done all the unlocking and has flashed it to WM6 Professional. On the bootup screen it shows:
IPL 2.16
SPL 2.16
GSM 02.19.11
OS 11.0.0.1
What I want to know is how I can install the TouchFlo w/ cube Rom as I find that more intuitive than what I am currently using. What would I need to download, upgrade/downgrade to get this running from start to finish.
Any help is appreciated, thanks.

Which is the present Rom installed on it ? Which wm6 is it ?

this is what it reads in the about
CE OS 5.2.1933 (build 18533.0.7.0)TNT
from the threads im reading, some say i need to flash to an official rom, then downgrade to 1.x then upgrade to 2.26 and then flash to whatever rom i want. is that right?

jazn54 said:
this is what it reads in the about
CE OS 5.2.1933 (build 18533.0.7.0)TNT
from the threads im reading, some say i need to flash to an official rom, then downgrade to 1.x then upgrade to 2.26 and then flash to whatever rom i want. is that right?
Click to expand...
Click to collapse
As you are already running wm6 TNT series Rom,it means your phone is already SIM/CID unlocked,there's no need to downgrade to 1.xx to unlock and then upgrade to 2.xx and flash any wm6 rom.
Yes ! its highly recommended,if you want to change to any other Rom,first flash the T-mobile 2.26 to provide you a good base,but its not necessary,you can download any wm6 or wm6.1 rom and just connect the phone with pc via usb cable and flash the rom.
You can try the latest wm6.1 TNT.19199 series v.2 Rom,it has TouchFlo version also from this link :-
http://forum.xda-developers.com/showthread.php?t=367534
Cheers!