Isn't there anybody who can give me his xda IIs rom image. i am stuck in bootloader and cant syncronise with pc so the only way i can make it working is using sd card method. so help me to dump some xdaIIs image on sd card.
thanks
No need for that.
Search the forum or see FAQ in wiki.
i hav read everything and its now 3 weeks. i hav tried the ship roms aswell but nothing can detect my xda IIs.when i put it on cradle it changes serial to usb but still not detected my pc. ship rom gives error 101 connection error. i hav tried mda III rom using sd card but getting section 3 upgrade not allowed. means i need xda to sd rom
plzzzzzzz help meeee
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
ojtan said:
I was mistakenly copy the wrong rom into the SD card and run the cheetah unlocker - it starts to flash the rom. After that the TREO750 is dead and soft & hard reset will not help.
I can only go into the bootloader with 3 color screen. Pressing PTT and reset button.
Anything i can do to make this TREO750 work again ?
Click to expand...
Click to collapse
If you can access the tri-color bootloader screen, then your Treo 750 is NOT dead.
The ROM is bad or wiped but the bootloader is good...that is sufficient for you to flash a good ROM & get it up & running.
What do you see on the bootloader screen?
Which ROM did you copy into the mini-SD card?
You could copy the .nbh file from the original WM6 ROM Upgrade package & change it to CHEEIMG.nbh into a freshly formatted (FAT32) mini-SD card & flash using the mini-SD card method.
thanks konker. I finally figure out the way to flash it with original ROM.
ojtan said:
thanks konker. I finally figure out the way to flash it with original ROM.
Click to expand...
Click to collapse
Great! I'm glad you got your phone working again.
glad to know its working again
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Any answer
Hello Sam,
I actually had the same problem, did you get it fixed?
Please let me know, how?
Thanks a lot
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Apoapo said:
Same problem here
In the 3 colored screen just displays this.
Palm Tr
IPL-0.20
Palm Tr
SPL-0.21.0000
When i insert the freshly Fat32 formatted SD card with the rom , apears "loading" for about 2 seconds and then just ends with the tricolored display.
Thanks for any advice.
Click to expand...
Click to collapse
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
safisam said:
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
Thanks in advance
Sam
Click to expand...
Click to collapse
Have you tried re-downloading the ROM in case you have a bad file? Also, have you tried a different SD card, or re-formatting the SD card you are using? Sometimes that will help, and make sure the CHEIMG file is the only file on the SD card.
startngate said:
You need to run Hard SPL first before flashing any ROM.
Your display would look like safisam's if you had run Hard SPL. (SPL-1.40.01iNex)
Click to expand...
Click to collapse
Thanks man, i was looking for any way to HARD SPL directly from the older loader, i couldn't find any.
But i already solved loading in the SD card an "original" ROM from palm.
Now i got this treo working again
Hi all
I have the same problem, after some progress during the update it stops and now I can see just the Palm logo inicialyzing...
I stil can get the Bootloader Screen (3 collors), but when I try to pass other ROM It says "file image corrupted"...
I´ve been trying with 4 SD card that I have (512Mbs up to 2Giga), but nothing works...
It seems that the Treo doesn´t recognize the SD card!!!!
How could I Pass a ROM not using the SD card??
Any help??
Palm treo 750 storage memory problem after flashing!Please help
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
darabah said:
Please help me!!!!!!!I have occurred this problem in my Palm treo 750 after flashing:i get this
message error:"Storage memory is critically low.i the storage momory is not increased. other
programs may not be able to star.Use file explorer to delete files that are no longer needed or
move some files to strage card".
And when i look the memory storge i see only:
-4.82 MB(Tatal memory storage)
-2.3MB in use and
1.78MB free
And like you know the real total memory storage is: 60MB.
Please help me!!!!!!It happen after i update it to Wm6.1
And hard reset, soft reset don't help.Help please!!!!!!!!
Click to expand...
Click to collapse
First of all, please indicate which ROM you loaded on your device.
Secondly, it would help the community to help you if you could state what software modifications you've performed on the phone. eg. HardSPL etc
Lastly, a list of installed software on your phone would be useful too.
Palm treo 750 storage memory problem after flashing!Please help
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
darabah said:
I had windows mobile6 Treo 750 2.27 ce os 5.2.1239(build 17746.0.2.4) original and i update to 6.1 Treo750_OS5_2_19199WWE_STD.rar. i used CheetahUnlocker, MAGIC_UNLOCKER and Treo750v_ExtROM_Unlockers with SD method
Like it descripted to the forum.
Plaese help me! Thank you for your reply!!!!!
Click to expand...
Click to collapse
From your description, it seems both of them are original stock ROM. Is your Treo a telco branded model or a unbranded unlocked model?
If the latter, you did not have to run the other utilities to unlock the phone...just flash the ROM.
I see that you ran the ExtROM unlocker...why did you have to do that?
The ExtROM is used to store device specific ROM customization that you should not have to bother too much if your ROM is a unbranded ROM (ie. not AT&T ROM etc).
If you left the ExtROM in it's unhidden state, that could be why the system is reporting the amount of free space to be so low. You should hide the ExtROM & then hard-reset the device again to see if that solves the problem.
Palm treo 750 storage memory problem after flashing!Please help
Thank u for your reply!
My Treo is unlocked model but i don't know if it is unbranded and it is from Palm Rom not AT&T ROM.
I'm news, can u tell me how to hide the ExtROM(Can u explain how to proced please?).
Thant u for all!!!!!
Hi guys
After I upgrade to ROM version 2.32.707.2
my jade can not detect sd card anymore
anyone can help me
thx
htc_lover said:
Hi guys
After I upgrade to ROM version 2.32.707.2
my jade can not detect sd card anymore
anyone can help me
thx
Click to expand...
Click to collapse
Did you upgrade Official ROM / Cooked One?.
Whats your SPL version ( U can see it in Bootloader Tri Color screen )
Whats your SD card Size?
Did u HardReset after 1st boot?.
I upgrade an official ROM on
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=541&news_id=146
My sd card is 4Gb
yeah i hard reset it after upgrade it.
It can detect about 30 seconds after hard reset or after i turn it off
but after 30 seconds it disappear
I don't really understand about SPL, where can I find it?
thx
Similar Problem
htc_lover said:
I upgrade an official ROM on
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=541&news_id=146
My sd card is 4Gb
yeah i hard reset it after upgrade it.
It can detect about 30 seconds after hard reset or after i turn it off
but after 30 seconds it disappear
I don't really understand about SPL, where can I find it?
thx
Click to expand...
Click to collapse
I have a similar problem.
I upgraded my Kaiser rom from WM 6 to 6.1 about a month ago and it was fine until 2 days ago, my SD card folder suddenly disappeared.
I tried downgrading it but still didn't work. Any senior member can help?
Hi guys, I am having trouble flashing with SD card and want to flash back to my original rom. My X1a is not reading my .nbh file even after hours of trying to read up on it and reformatting etc. Is there a way i can do it through activesynce instead like installing Hardspl? I know its more risky but I have no other choice! Please kindly help me! Thank you! Links to software etc is greatly appreciated!!
ITS HAPPEN AFTER INSTALL THIS ROM
Duttys WM6.1 V4.3 ROM Final
I NEED HELP THE DVICE DONT RECONIZE THE SD MEMORY/
WHAT TO DO.
tried to flash another rom?
when you flash all cards have to be taken out.
afterwards you put them back in the phone.
it is a norma phenomen.
you need to format your card again and the will be recognized.
if the phone card is damaged change it.
As above post, plus this has been asked many times before
Thread closed