Database Develop

Kaiser not starting up after SIM-Change

Hi guys,
I changed my SIM and afterwards while booting the kaiser is telling me, that the SIM-door is not locked, but it is. A little, 1 mm, big thing was coming out, it´s placed under the little metal-thing nearby the lock, so the damage can´t be from my side..
The mobile is three month old, but I loaded another ROM, so I´m not sure how it is with the guarantee. It´s a hardware-damage, so it shouldn´t be a problem.
Or is there a possibility to put the original ROM on the Kaiser? The mobile is not starting up, message is coming and turn of the phone automatically...
Any ideas?
cheers,
brasax

Search, search, search...
brasax said:
Or is there a possibility to put the original ROM on the Kaiser? The mobile is not starting up, message is coming and turn of the phone automatically...
Any ideas?
cheers,
brasax
Click to expand...
Click to collapse
Your answer is here: http://forum.xda-developers.com/showthread.php?t=335568

svcglobal said:
Your answer is here: http://forum.xda-developers.com/showthread.php?t=335568
Click to expand...
Click to collapse
My mobile is not starting up, because it automatically shuts down after ten seconds. So, how should I flash a new ROM, if I get no AS-Connection established? Your link is not helping..
Anyway, found the problem and the Kaiser is working again..

How did you resolve the problem!
I am facing exactly the same behaviour as yours.
How did you resolve the problem?

Cause of 10 second shutdown
Alexandre C Guerreiro said:
How did you resolve the problem?
Click to expand...
Click to collapse
Not sure this is your problem but if you study the little microswitch at the end of the sim bay, you'll see it's possible for this not to mate correctly with the groove on the sim door latch if the switch has been moved independantly of the door lock. It's that little switch being in the open position which causes the flagged up message and 10 second shutdown. Realign them both back to the correct position and the problem should be gone.

that was exactly my problem..

Diamond Camera Issue! Please Help

Hi Guys,
My apologies if this has been posted already, but I couldn’t seem to find anything on it.....I have had my Diamond for about 2 weeks and the camera hardly ever works. 90% of the time when i start it all i get is the Photo logo and then a blank screen. If i push the capture button, a few seconds later I get the error "Unable to capture photo. Unable to get frame data from camera device". I have done the latest HTC official update to ROM 1.93, I have soft reset and hard reset and no luck Sometimes if I do a soft reset it will work for a little bit and then just stop working again.
Any advice would be greatly appreciated!!
Thanks
Grim

you may need to install one of x-dev custom ROMs, or try hard reseting your diamond. if the problem still exist after Hard Reset, probably it is hardware trouble.
read read and read before you install Cooked roms from xda-developers. you need to do HardSPL before instaling any other ROMs

Thanks for the response!
I have hard reset the device a few times, and no luck. I dont reallt want to install a cooked ROM, I dont think I can handle it to be honest. I will take it that it is a Hardware fault and I will be sending it back tmrw. Thanks again!

Hi Grim! I have the same problem. I've installed 1.93 official ROM and even SwiftBl 7.5, I've upgraded my Radio From .05 to .08 , but my camera is still like yours.
Have you find a solution? Did HTC service Center change your device?
Thanks..

İ have the same problem and could not find a solution for it...

Dear All,
I have same problem. Camera crashes after 1 or two photo. I have black screen.
Tried many Rom's. no fix .
How could you fix ?

anyone got a solution for this problem?

is the diamond camera hopless?
no solution for this error till now?

This issue realy bugs me now. Every time I've change the OS it work for a bit then it dies. realy anoying. Anyones suggestion may be usefull.
If it is the hardware - is it the camera? Could it be just gone loose?

There´s few steps to take.
If camera works sometimes, I think, it´s not a camera problem on itself.
(IF YOU HAVE ACCESS TO PARTS AND YOU KNOW WHAT U`RE DOING)
Try this:
Exchange flex and flash (use official RUU htc).
Or:
Put phone inbootloader, disconnect flex from board (while working and booloader on) and flash.
If everything else fails, I´m affraid the PCB has internal flash IC problems.

Dont have parts but will open it and check flex. If flash is gone how come mtty does not flag some segments as bad. Checking around the web looks like I am not the only one with this problem.

all you Coders... please help us with the camera issue.
Hey guys..
this camera for touch diamond is screwing..
tried various methods.. flashed everything possible..
still no luck..
if any xda user outthere.. who has the solution for this problem..
please help up..
my device is out of warranty..
thanks

I've found out if you take the battery out for 10 secs and put it back the camera works again untill you run another app. It feels like as soon as you run something else with camera it is screwed!

Unable to get frame data from camera device

Hi,
I got my HTC Diamond (CDMA) few weeks ago.
I installed MightyRom. Everything was working just fine.
At the beginning, camera was working and I took pictures with it, with no problem.
However, two weeks after, I'm not able to take picture anymore.
I've got a black screen, and after a moment, it said :
"Unable to get frame data from camera device"
I tried : soft reset, hard reset, reinstall Mighty ROM, Reinstall Generic ROM that came with HTC... Nothing work !!!
Anyone have an idea, would be greatly appreciated !!!!

it seems that the camera had broken
send it to htc

Aqrab said:
it seems that the camera had broken
send it to htc
Click to expand...
Click to collapse
Hi, I have the same problem: blank (black) screen, and randomly it starts to work again. After one or two photos black screen again.
At least, I've got the hope that the camera is working.
I will try to change the radio.
Regards,

AndyArg said:
Hi, I have the same problem: blank (black) screen, and randomly it starts to work again. After one or two photos black screen again.
At least, I've got the hope that the camera is working.
I will try to change the radio.
Regards,
Click to expand...
Click to collapse
Problem solved. I enter some values in the registry just like it says in this link:
http://nimovil.es/software-movil/otro-programita-para-la-htc-diamond/
Regards!

Hi I have a HTC HD with the some problem pls help me how to make the camera work thx

Help me please, dead tytn2 :(

Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me

Please help meee My phone now is more slow than normal :/

That happened to me a while back, I took it apart several times and checked connections etc. but that did not fix it. I ended up buying a new LCD off of ebay which fixed it perfectly. So, I would suggest doing that (I bought one for 15USD used).

But this to me seems to be a problem on the main board, because the phone sometimes gets really slows And sometimes that white problem appears and others not, like 90% when i need to use my phone

Flash Stock ROM?
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.

i think RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40. 02_1.65.17.56_Ship is an OEM rom isnt? :x

P4k1t0 said:
Hello guys, i really need your help!
My phone is so strange now, i have been using Ultimate-X.V9 -21054, but in last days, my phone has gone to white screen some times when i press to screen up sometimes everything is fine, but others not and my phone sometimes dont respond to my touch, and sometimes is a bit slow
Now i have flashed to RUU_Kaiser_HTC_PTG_3.28.410.0_radio_sign_25.83.40.02_1.65.17.56_Ship, during the upgrade my phone stay on tree colors, but on computer appeared the status bar! and everythime i turn on my phone now is like 90% is allways white :O i have open my phone, and reconected all again, but the problem still there! im using 3.34 hard spl!
Please someone help meee... i really love my tytn2 is there any way to put this fine? its hard spl problem?
Please help me
Click to expand...
Click to collapse
did you ask in the proper thread before starting a new one?

msd24200 said:
did you ask in the proper thread before starting a new one?
Click to expand...
Click to collapse
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?

P4k1t0 said:
Lolol? and what is the proper thread? --' dont you see this is any rooms i have tried?
Click to expand...
Click to collapse
noticed when searching all your post that you went straight to starting a new thread for this instead of asking in on of the flashing threads. http://forum.xda-developers.com/showthread.php?t=533976

Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!

P4k1t0 said:
Dude, and in what that link will help in my problem? if search on it, you will find the solution to my problem? the answer is NO, maybe you should read a bit better!
Click to expand...
Click to collapse
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?

msd24200 said:
dude the answer is yes go ask in the flashing for newbs thread, or one of the other great links in the thread i posted. maybe you should read better the rules about starting new threads because you are having a flash related problem that needs to be asked in a thread already setup to deal with flash related matters instead of starting a new thread.
have you tried pushing the hard buttons to get into bootloader? do you think MTTY may help your current problem?
Click to expand...
Click to collapse
Dude i can enter on bootloader yes, can i use my phone yes! but the problem is that sometimes (i mean, like all the time) the screen stay white when i turn it on, and the phone stays slow!!!!

jsgjm said:
Did you flash if back to a OEM ROM? Did it work OK if you left it on the OEM ROM? I have used "Kaiser_HTC_ASIA_HK_WWE_3.34.721.2" as a OEM to upgrade from on many phones that I had upgrade issues with.
Click to expand...
Click to collapse
i have tried that rom too, but nothing the problem is here

It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol

zelendel said:
It sounds like your Screen is on the way out. I would replace it.
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Well, if is about the screen, i can say im safe :x
But one thing on my mind, the white screen i could say to change the screen to one new, but the problem is the kaiser stay a bit slow, and sometimes it dont respond to what i want!
With that stay thinking that the problem is about the mainboard or something like that :s but i hope the problem is the screen, i will buy a new on ebay

The ribbon cable for the digitizer (touch screen) attaches to the LCD, and then both signals feed through the same cable into the D-pad board, so its possible that there is a bad connection somewhere in the LCD/Digitizer assembly that causes it to not sense your inputs, even when the LCD itself is working. Mine just failed completely to a white screen and did not come back. It could be something besides the LCD..try flashing a new HardSPL and/or a different ROM, but if I had to bet, I would bet on the LCD.

zelendel said:
No lets play nice. Or Ill break out the fish heads lol
Click to expand...
Click to collapse
Thankyou made me chuckle

P4k1t0, I know you're frustrated that you phone doesnt work, but do not get uppity at the other forum posters. If you sound off against msd24200 and a mod sees it, its likely to lock your topic.

i had the same situation two weeks back after i flash with my own cooked rom.
what i did is flash the stock rom through SD/storage card and everything is fine.
you already try this method ? you can search on how to flash from SD/storage card

to flash by sd card? ok ok i will try it right now to see

W 6.5 Roms: Keyboard Problem

Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca

l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck

I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks

Is it laggy and slow in every program? For me it works very well. Only thing is my m-key is kinda broken, not a software issue i figure though.

zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
That's how my m-key is broken, one in ten times it types two Ms on one press. But it isn't like that on any other character.

kanchigo said:
if U want to have helps, U shuold tell us what's rom are U using or U want to use, so people, who have had experiences with that ROM will tell U how...
Goodluck
Click to expand...
Click to collapse
it's not located in a specific rom... every 6.5 rom create the problem.
@jablko yes, every program...

zannyboy said:
I've had a similar issue to this too since using the 6.5 roms, also along with the lag it double inputs the character selected sometimes. If anyone knows a fix fort his would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
exactly the same to me.

l0rdsheva said:
exactly the same to me.
Click to expand...
Click to collapse
same here, altough I had the same problem at my original WM 6.1

Same issue
l0rdsheva said:
Hi guys, i'm using on my x1 windows mobile 6.5 rom since first beta. I have tried alla kind of rom. As far as i know i have always had a problem that create me some trouble. The x1 hardware keyboard seems laggy and very slow. Also FN key take a lot of pressures to activate. Someone else is having the same problem? Just to know if it's mine broken. I don't want to go back to 6.1 to try.
Thanks
Luca
Click to expand...
Click to collapse
I have experienced same issues like you did. The Fn key works only when I put lot of pressure on it (didn't succeed to determine which is the most suitable position) so, I've been forced to find other alternatives (soft keyboards). But, what's important is to find out if this is a hardware problem or is simply related to the new ROM installments which I play with...
Any opinion/suggestion is more then welcome...
Thanks

It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331

oh let me tell you something real that is happening.
1.keyboard is crap if u dont use the buttons daily ,you will have this problem(i have it too)
2. same as my camera button( i press half way to auto focus and then press it fully to take a picture. but now it auto focus and when i press fully,the camera will auto focus again and shoot the pictures )
i dunno what is wrong with X1 ,but htc has make a bull**** things for SE.(happy that SE decided to leave them).

ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.

l0rdsheva said:
ok so seem to be an hardware problem; i'll dismount mine x1 to see if there's dust or something else under the keyboard.
Click to expand...
Click to collapse
Now that's hardcore!

Jablko said:
Now that's hardcore!
Click to expand...
Click to collapse
no problem, it's already out of warranty and if it goes wrong is time to buy another device!

crava said:
It's not a wm 6.5 related problem... there're tons of guys having this problem, and soon they're going to increase, cause it seems to get worse with time...
my keyboard has reached an unusable state, and the left half of the keyboard type twice or nothing.
The first thing you can try is to longer the time for input replication... if it doesn't work, then send it to SE, and hope to receive it back in a little time
I'm waiting to find a good alternative to X1, then send it to assistance, and when it comes back sell it... never buying SE products anymore
searching with google get many results... this is the first:
http://forum.xda-developers.com/showthread.php?t=489331
Click to expand...
Click to collapse
I reached to the same conclusion like you did. Seems like most of the SE X1 keyboards have problems, as well like the battery life (btw, last night, in stand-by mode, my X1 battery drained out completely without having any process/program running)...
Speaking about SE X1 in general, yes could be taken as a kind of failure but we don't have to forget is made by HTC. So, they could be blamed as well for this lack of success!
Or maybe there was also a sabotage around, who knows?

time to get X2