now i upgrade my mda3 to Helmi Windows Mobile 6 Profesional R0
CE OS 5.2.1620 (Build 18125.0.4.2)
and instalation was finish bout 4 min,that was wired,so when i restart half of programs didnt work.i search for problem and see my latest version of activesync was 4.2,i download last version and every time when i start upgrade again i push next then i got this.
http://img208.imageshack.us/my.php?image=55895612mi0.jpg
i check onlline problem for activesync all works ok,i configure my firewall..thx for every help and sorry bout my eng..
best regrades from cro..
if you dident do a
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
in the bootloader after the flash it could be because you have ½ of your old regs and such
thx now works,but wired thing is because i again install wm6 and instalation was finished bout 3 min..hm i hope so all is ok..
new problem i cant surf on net when mda is connected via activesync,with my last mda no problem but with mda3 nothing,i lost whole day with trying but ,please helpp..
Enable KITL -> NO Clean Registry Hive -> YES Format Storage -> YES
Where are this value:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
Where I can set it?
Thanks
@secur
do hard reset
hold mic+camera button and reset button
Active sync
Hi,
I had a similar problem with active sync solved installing latest actyve sync version and turn off completely my firewall.
good luck
fixed,dns was problem..
secur said:
Where are this value:
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
Where I can set it?
Thanks
Click to expand...
Click to collapse
press CAMERA+RECORD and Reset at the same time
waiting for popup message
pres Record for select yes/no
press Camera for next selection
and then press message button to confirm selection
Related
I upload Helmi AKU 3.5 but is errors: handset volume is main Screen automatically switch off. I'm turn on volume by tap stylus and drag but auto turn off. How to prepair this error (windows mobile 2003 not this error). Thanks
try reflashing
panne said:
I upload Helmi AKU 3.5 but is errors: handset volume is main Screen automatically switch off. I'm turn on volume by tap stylus and drag but auto turn off. How to prepair this error (windows mobile 2003 not this error). Thanks
Click to expand...
Click to collapse
OK.. first of all clean out your temp files (internet & windows!), and then download the rom again...
Try to instal it following the instructions again. Did you remember to HARD RESET (camera & record button, set options to no: yes: yes)?? Were there any errors on installing? Is this the forst time you have updated the rom to WM2005? Did you repartition the extrom?
We are only as good as the information we recieve, and you didnt provide a lot!
Hello, moments ago I tried to install an app which I assume was designed for windows mobile 2003, I think it was a bit of a stupid idea..
Anyways, it looked like the install shell (within the ppc itself, because I executed a .CAB file) hung.. so I did a soft reset..
Well, the conclusion is, my Himalaya hangs at bootup now.. is there anything I could do to make it boot again?
thanks
himalaya finally boots
lol no problem
I fixed it.. woahh!! that was worrying..
For future reference however, I did the following method:
Reinstalled the OS, with the origional TofClock install files, once that made no difference, I did some more browsing of this site and did this again:
----------------------------------------------------------------
3. Hard reset your pda.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts
(taken from one of the tutorials that came with the TofClock install manual' I've seen it posted by a user named helmi_c)
-----------------------------------------------------------------
But anyways I'm glad that's over, now I only know one contact but I'll live..
i would have replied but my internet was down...the procedure u followed (by helmi) should have been ur priority...any way glad that ur problem is solved..
Mods please lock this topic
I have install one of roms WM 6.0 from here on my MDA II and it was working. Then I've found a polonisation (cause I'm from poland) to it, and I installed it. MDA stopped working . I can turn it on but it stopping on the startscreen and I can't do nothing . I was trying everything- cold reset and even WM reinstallation. How can I turn it back to life?? plz help
P.S Sry for my english
Did u follow all the instructions correctly...Try to go into Bootloadermode (the basic settings to start the flashing) after that You have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Yeah, it's working now, thanks !!
you are most welcome
hi to every one i just want to thanks you gays work this great job,but i need a little help,I have i-mate pocket pc phone edition it was with wm2003 I updated with wm6.1 but not working well so i try another version but same 6.1 now it works well but it shows me 3 media player,3 search,3 options of help,and down the screen it shows a line with color,so what i should do pl help.
best regards from me
sorry if I posted in wrong sesion
try to hard reset using this method :
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
ather90 said:
try to hard reset using this method :
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Click to expand...
Click to collapse
IT WORKS THANKS BRO THANKS VERY MUCH
THAAAAAAAAAAAANNNNNNNNNK YOUUUUUU
You are welcome..but next time first read the "readme"
Hey, "ubejd," I'm glad you got it working!
T'was so simple for Ather.
i'm trying to flash hardSPL to X1. always got error 240. i've switched off firewall, hard reset the phone.. same problem. searched google..nothing find. any help plz?
connect the phone and run the hardspl as admin, something should pop up on the phone display for u to allow, cant remember exactly what but click ok or something in that relation
establish a solid active sync connection first
Hi my friend
i had the same problem but i figure out .
Go to [settings ---> connections ---> USP To PC] chose ActiveSync and uncheck Enable advanced network functionality
i wish you a Good luck
ur phone is synced?
conan206 said:
Hi my friend
i had the same problem but i figure out .
Go to [settings ---> connections ---> USP To PC] chose ActiveSync and uncheck Enable advanced network functionality
i wish you a Good luck
Click to expand...
Click to collapse
this, ofcourse, you have to do on the phone. But yes, make sure you have made a connection with active sync. that active sync and your pc recognize the xperia as a windows mobile device, before you attempt to do hard-spl.