Hello guys..firstly i'm quite new with pda stuff.
I bought 9100 and installed new rom with nordic symbols, setup went well and now i have all symbols and letters needed.. but now my keyboard won't work anymore.. only the touchpad
tried to install new rom IPL/SPL version 3.08 that didn't fix the problem..
tried also shut it off many times ..everything i did didn't solve the problem
so could any of you guys help me solve this huge problem
thnx
First of all which ROM did You install?
Try something well tested, like Whiterat's WRCX1 ROM, and install some nordic symbol SIP keyboard.
Related
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
michielc said:
Hello,
I have an O2 XDA Mini S (HTC Wizard) which is a G4 device running the latest 02 carrier rom. I tried to flash it with the latest version of the Dutch Qtek 9100 rom. I did everything what's in the manual, after a few minutes shelltool says Make a hard reset now. When I make the hard reset I still get the startup screen of my old rom. The language, applications and the themes of the Dutch Qtek 9100 are installed fine.
I installed the cab files and disabled the Radio module before flashing the rom. After it failed the first time I tried again but just the same
Click to expand...
Click to collapse
Shelltool only flashes the OS part of the DOC chip, not the splashes...
mestrini said:
Shelltool only flashes the OS part of the DOC chip, not the splashes...
Click to expand...
Click to collapse
Is it possible to replace the splash screens with the screens of the rom that I'm trying to install on my Wizard ?
Hi all,
i have a big problem flashing a new wm6 rom to my wizard. The wizard is CID unlocked following the How to flash a new ROM to your Wizard... a little tutorial! tutorial.
I had 2 WM6 roms on my wizard - 1 of them was WM6 crossbow, which i used a couple of months - both flashed w/o any problem and worked perfectly.
Last day i decided to flash the TNT touch flo rom but the install wizard ended with error on 99%, then i tried the TNT professional + home - same result, then i tried to flash the crossbow rom - same result. Then i returned to the unlocking howto - and followed it again but i can not flash wizard_love rom (ands at 98%) and Xda_MiniS_LaunchROM_v154102 (ends at 85%). I tried the whole procedure many many many times... but unfortunately the only rom i can flash w/o any problems is the t-mobile rom. Nothing else works...
Any help is highly appreciated!
Thanks!
succsess flashing new rom to my wizard
Hi All,
i tried to flash WRCX 2 (TouchFLO) after i flashed the t-mobile rom and i had success!!! I have it now running w/o any single problem .
As i posted above i tried the whole procedure with many other WM6 roms without luck ...
I am wondering what could be the problem here ...
My Qtek 9100 is dead after flashin new rom
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
cimi said:
After I flashed the newest rom version downloaded from official QTEK website
my 9100 has just 'died' without any signal.....
My previous rom was in spanish I tryed to put the new rom in english version something like 2....wwe and now it came a big trouble...
Somebody can help on this isue?!!
Thanks...
Click to expand...
Click to collapse
Try to get the phone in Bootloaders (multicolor screen) and flash the Rom with 'RUU_Noid' utility,you can search for this in the forum or read this thread :-
http://forum.xda-developers.com/showthread.php?t=291215
I have a HTC diamond unlocked(GSM). whenever i install any new application or an utility and if the installation encounters an error or the application does not work after the installation or even if it installs properly and is not comparible with the phone or doesn not work after it installs, I END up blowing up my PHONE KEYPAD and COMPACT QWERTY keyboards.
It happened twice and i had to hard reset both the times.
Please suggest me a possible solution or a tweak
Thanks,
Priyank
priyankladdar said:
I have a HTC diamond unlocked(GSM). whenever i install any new application or an utility and if the installation encounters an error or the application does not work after the installation or even if it installs properly and is not comparible with the phone or doesn not work after it installs, I END up blowing up my PHONE KEYPAD and COMPACT QWERTY keyboards.
It happened twice and i had to hard reset both the times.
Please suggest me a possible solution or a tweak
Thanks,
Priyank
Click to expand...
Click to collapse
hi priyankladdar what programs are you trying to install and what rom version do you have on your phone.?
cobbs said:
hi priyankladdar what programs are you trying to install and what rom version do you have on your phone.?
Click to expand...
Click to collapse
Hi,
ROM ver: 1.93.720.4 WWE
Radio ver: 1.13.25.24
Actually tried installing slide to answer black and white both the versions dint work. and in the mean time my PHONE KEYPAD and COMPACT QWERTY keyboards stopped working as in i am NOT able to type the alphabets.
whenever i type only numbers are typed but not alphabets
same problem encountered when i installed finger keyboard
priyankladdar said:
Hi,
ROM ver: 1.93.720.4 WWE
Radio ver: 1.13.25.24
Actually tried installing slide to answer black and white both the versions dint work. and in the mean time my PHONE KEYPAD and COMPACT QWERTY keyboards stopped working as in i am NOT able to type the alphabets.
whenever i type only numbers are typed but not alphabets
same problem encountered when i installed finger keyboard
Click to expand...
Click to collapse
Hi,
you should up grade to 2.03 rom you can find stock rom's here dont forget to read here first http://forum.xda-developers.com/showthread.php?t=416211 if you havent done the hardspl. I think that some of the new apps require 2.03 the slide to anwser does. I hope this helps you.
cobbs said:
Hi,
you should up grade to 2.03 rom you can find stock rom's here dont forget to read here first http://forum.xda-developers.com/showthread.php?t=416211 if you havent done the hardspl. I think that some of the new apps require 2.03 the slide to anwser does. I hope this helps you.
Click to expand...
Click to collapse
See.. I bought this phone in INDIA and in the official WWW.htc.com ( India site) , all i see is this version of rom for the update. No updates available after this version of rom..
So wondering will it be OK if i upgrade to higher than this???
i am from South Africa and had a tytn 2 for more than 2 years. moved to Switzerland and got a new tytn 2 but it is in german and i don't understand a word. i downloaded almost all rom flashes but the phone reboot the moment the flash is not the german language contacted htc they say it is license restrictions can't change the language once it is loaded i don't believe that did a lot of reading and it seems some people managed to do it. now i am not that much of a techie so does someone please have a simple awnser for me.
I did a hardspl flash but phone is still in german and trying to flash with a english rom reboots the phone. flashing with a update german rom works fine.
Any help please
try unlocking the phone first.. flash a new SPL, radio , then the rom .. when the rom is flashed and asks for the screen calibration do a soft reset.. hopes this works for you.
Moved as not ROM Development.
no success.
Any other advice