Related
I have this problem on my TYTN II, its running on Windows Mobile 6.1,
ROM Version : 3.29.707.0 WWE
Radio Version : 1.65.16.25
Here is the problem, there are instances that when I answer / make a call, I don't get to hear anything on the ear piece, and the other party also doesn't hear me. I can't seem to figure out where exactly the problem is, because when I do a soft reset, it will work normally again.
Anyone here experienced the same problem ? Any solution ?
Thank you.
jtphl said:
I have this problem on my TYTN II, its running on Windows Mobile 6.1,
ROM Version : 3.29.707.0 WWE
Radio Version : 1.65.16.25
Here is the problem, there are instances that when I answer / make a call, I don't get to hear anything on the ear piece, and the other party also doesn't hear me. I can't seem to figure out where exactly the problem is, because when I do a soft reset, it will work normally again.
Anyone here experienced the same problem ? Any solution ?
Thank you.
Click to expand...
Click to collapse
I had that problem with an older version of Dutty's wm6.1 rom. I recently upgraded to the Dutty's Apr 29th version (the 19000? or whatever, the upper number one in the thread) and used a 1.71 radio. I haven't had the issue since.
One thing that caused the problem was the headphone adapter with the wm6.1. It would "activate" the headphone mode (turn off the speaker/mic), but when unplugged it wouldn't "deactivate" it until I rebooted the phone. This happened about 30% of the time.
jtphl said:
I have this problem on my TYTN II, its running on Windows Mobile 6.1,
ROM Version : 3.29.707.0 WWE
Radio Version : 1.65.16.25
Here is the problem, there are instances that when I answer / make a call, I don't get to hear anything on the ear piece, and the other party also doesn't hear me. I can't seem to figure out where exactly the problem is, because when I do a soft reset, it will work normally again.
Anyone here experienced the same problem ? Any solution ?
Thank you.
Click to expand...
Click to collapse
Sounds like a Radio/ROM incompatibility issue. Try flashing the radio ROM that you know works with the ROM and see if you still have the same problems.
Tytn II problem on calls
I have the 1.65.16.25 Radio version, and I am using the official HTC WM6.1 upgrade that I got from South East Asia versions.
i want to upgrade to a 1.71 radio but was unable to do so, i tried to put the .nbh file to a MicroSD and booted to Bootloader but no response, no flashing of radio takes place.
jtphl said:
I have the 1.65.16.25 Radio version, and I am using the official HTC WM6.1 upgrade that I got from South East Asia versions.
i want to upgrade to a 1.71 radio but was unable to do so, i tried to put the .nbh file to a MicroSD and booted to Bootloader but no response, no flashing of radio takes place.
Click to expand...
Click to collapse
rename the RUU file to KAISIMG.nbh
back to the basics .........
page 1 on kaiser wiki......
ROM Upgrading
1. Don't know what a ROM is?
* Watch this first, and read the ROM Flashing FAQ.
2. Don't know what a SPL is?
* After reading the basics if you are still confused about SPLs, or which SPL you want, read SPL Questions?.
3. Upgrading your ROM can void your warranty. Worried?
* Browse through how to revert back ROM and SPL for warranty return before you start.
4. Think you're ready?
* Read some things to know before and after you flash.
5. Ready now?
* Start here with the Introduction to ROM Flashing to find out!
6. Still confused?
* How about another how to flash the ROM thread.
* Or, How to flash the ROM using a MicroSD Card
I was able to upgrade to 1.71.09.01, but the problem still persists. After making plenty of calls as testing, problem went on again, and a reset again temporarily solved the problem.
I had the same problem when I installed a custom dialer. I then uninstalled it and seemed to not happen anymore.
I kept to the htc dialer.
I had it a couple of times on my bone stock O2 XDA Stellar. A soft re-set sorted it though.
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer
After I get new rom and a unsigned Hard SPL my G-sensor just show the programs in vertical position... in Teeter, the ball just stay at the up side of display... Why???
What ROM did you flash to?
From the first momment I tried the Energy rom, after, dutch, ahen, macadam, and others... but in all of them my display shows some programs in up-side-down position... where I mistake?
I have the same problem
I have tried different ROMs but i am still not able to use teeter
Helllpppppp... If some one knows...
i have the same problem after i crashed my diamond...may be you guys crashed it and didnt notice that you just broke the g-sensor hardware....
Are you sure about this ??
I dont think we can break the g-sensor hardware so easily without even having a scratch on diamond. :|
I don´t think its possible... ´cause I just change rom... in the same moment it wasn´t function...
Maybe it change to the original Hard SPL 1.93 get back to the normal form... but I don´t know how can I make it turn back to 1.93... ´cause the file isn´t executable...
I have HardSpl 1.93 and it doesnt function for me
is there a newer HardSpl that i can try maybe ??
Guys can any1 of you help us out here ??
abhishek.vij said:
Are you sure about this ??
I dont think we can break the g-sensor hardware so easily without even having a scratch on diamond. :|
Click to expand...
Click to collapse
sure 99%
anyway,what it is the connection between gsensor and hardspl???
I don´t know what´s connection... but my friend had the same problem and he get his diamond to support and there the support just put another rom (Official) with a 1.93 hard spl and the g sensor turn on perfectly without hardware damage...
So...
the same problem in more then 3 diamonds (If I correct)... it isn´t a hardware damage...
@ Foxlou : any updates from your side ?
I have been trying very hard to make this work but it just doesnt work . I am thinking of going to a service center and giving them the device..
abhishek.vij said:
@ Foxlou : any updates from your side ?
I have been trying very hard to make this work but it just doesnt work . I am thinking of going to a service center and giving them the device..
Click to expand...
Click to collapse
let us know it its a hardware issue
Guys try to flash with a stock ROM (2.03). If it doesn't work, try another SPL like Olinex 1.40.
If you want to know what kind of problem is it (hardware or software) just flash with stock rom and stock spl.
very easy to identify whether is ur g-sensor hardware spoil or not function
go www.htc.com flash ur latest diamond ROM .. check whether the g-sensor working anot .
For me i still would recommend use offical ROM
I flashed with the Stock rom but the problem is that i am not able to put the stock SPL.. i have HSPL 1.40.
Whenever i flash with stock SPL it will show as 100% but still i wont get the Stock SPL. Btw guys any links for stock spl 2.03
g sensor solution
download gyrator
idada10 said:
download gyrator
Click to expand...
Click to collapse
this is funny
anyway i have original ROM and SPL..and still doesnt work
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Charlles said:
Hi everyone,
I try update my windows 6.0 to 6.5 yesterday, i fallow all steps and during the update, when the update is in 16% a error happen. I try user the recovery but doesn't work, and now when i start my phone, show the tri-color screen and stay.
What i can do to fix this?
Important remember, i need to use the jump spl 1.93 to get out of the white screen for update the windows.
Thanks all.
Click to expand...
Click to collapse
Reflash your original carrier rom. from the tri-color screen.
Since WM 6.5 has not and will not be released for the Kaiser, I am assuming that you are trying to flash a custom 6.5 rom, and have followed all the steps described here:
http://forum.xda-developers.com/showthread.php?t=433835
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Charlles said:
I try install this ROM: http://forum.xda-developers.com/showthread.php?t=397121
Sorry, my english is very bad.
"Reflash your original carrier rom. from the tri-color screen." What do you mean?
Thanks
Click to expand...
Click to collapse
Did you follow all the steps in the link I gave you above before you tried to flash the Hyperdragon rom ?
What I mean is to find the original rom that came with your phone, in the Kaiser Wiki and reflash that on to your phone.
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Charlles said:
How can i know what is my original rom?
I remember, the visual is like this: http://pdadb.net/img/htc_tytn_ii.jpg
thanks
Click to expand...
Click to collapse
Where and when did you get your phone and who is the carrier ?
I from Brazil, the carrier is CLARO, i buy of a friend in this month, i have no idea when he buy.
In the box of the phone, is write: "Windows Mobile 6 Professional"
have another way to fix this?
What is the built of your tytn II i.e. its HTC TYTN II or AT&T Tilt ???
if its of HTC then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of HTC available on kaiser wiki page and vice versa for AT&T Tilt.
Hope it'll sort out ur problem.
Cheers
kashifmehmood said:
what is the built of your tytn ii i.e. Its htc tytn ii or at&t tilt ???
If its of htc then try to update the latest rom 6.0 or 6.1 with radio (as both are official) of htc available on kaiser wiki page and vice versa for at&t tilt.
Hope it'll sort out ur problem.
Cheers
Click to expand...
Click to collapse
htc tytn ii
A try a lot, and usualy the errors bellow happen:
ERROR [294] : INVALID VENDER ID
ERROR [262] : UPDATE ERROR
If help, what show in the screen is:
RUUNBH
KAIS120
SPL-1.94.0000
CPLD-8
USB
You need other information?
Thanks
Fellas,
I read in another topics, and i think this error happen because i don't have the HardSPL installed on my HTC TyTN II.
Now the question, how i can install HardSPL with my phone frozen on the tri color screen?
How can i know if HardSPL is install on my phone?
Thanks.
Hi, if anyone could please help me i would be gratefull, i recently purchased a D2 but its already preloaded with WM6.5 rom version 2.53.405.5 (76952)WWE, But i really wanted WM6.1 as, among other things, i wanted to use the handwriting rec.
does anyone know what stock rom to reload? and where i can get it? sorry to ask such a basic question.
thanks in advance,
http://www.htc.com/europe/SupportDownload.aspx?p_id=249&cat=2&dl_id=613
thanks for that, however it seems to have just bricked the phone
thanks for that, however it seems to have just bricked the phone
it seemed to work, all the correct messages displayed
but......
now all that happens is it turns on, shows the touch diamond2 screen, then resets
it has the following text in red in the lower left hand corner
r 3 . 43. 25 .19
g 61. 20t. 25. 10U
d 1. 39. 47382
does any one have any ideas?
Try to hard reset.
tried that before i posted
and a soft reset, and another hard reset to be sure,
i searched the forum but couldn't find any reference to that type of error either.
any ideas on how to retrieve it from paperweight mode?
Download stock ROM for your region
Unpack it with WinRar or TotalCMD
Rename RUU_signed.nbh to topaimg.nbh
Copy topaimg.nbh on your SD card
Enter bootloader (hold volume down and turn on phone) and follow instructions
edit:I guess for wm 6.1 you need lower version of SSPL
thanks dude, i used the bootloader to reinstall the latest rom from HTC.
Topaz_S2_HTC_WWE_2.53.405.5_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
my phone is no longer a brick however i am back to square 1 in that i still have wm6.5, and i want 6.1
ive tried to reflash with the older rom fighter7139 suggested
RUU_Topaz_HTC_WWE_1.39.405.3_Radio_Signed_Topaz_61.20t.25.10_3.43.25.19_Ship
but it gives me the same rebooting error.
any ideas why wont the older rom work on my phone? or if theres an alternative to that rom ?
thanks
I've loaded hardspl 1.83 and extracted the file RUU_signed.nbh and renamed it to topaimg.nbhand,
i moved it to the SD card, reflashed the phone with the 6.1 rom,
but i get the same error.
any idea on what rom i should use to update from?
or what stock spl i'd need to run this rom's version of 6.1 ?
a thought
maybe i don't even need 6.1, all i want to do is to fix two things -
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
2) add handwriting recognition
- would also be nice to have the taskmanger icon, the battery icon and the original windows start menu back too, but im not dependent on them....
so i guess any rom would do that allows these functions, any help or info on this would be much appriciated
terminalkhaos said:
1) make the sms messaging work like on the old htc devices ie diamond or tytn ie not use htc messaging
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showpost.php?p=3771519&postcount=2991
2) add handwriting recognition
Click to expand...
Click to collapse
http://www.htc.com/www/SupportDownload.aspx?p_id=249&cat=0&dl_id=824
thanks for that, however that was the first thing i tried, i saw the download for the handwriting ap just after i got the phone, not knowing it didnt have it when i swapped from my diamond,
the thing is the update only works on certian AP version control builds -
the message on the site is -
Note: AP version control -> The criterion will pass if the Touch Input for Pocket is equal to Version 2.1 (Build1919.1320), or lower.
mines a higer version, which i assumed originally had to do with it being wm6.5 not 6.1,
- i have tried downloading and installing anyway but it wont load.
does anyone know how to get this update to load, or how to change the AP version control back to a lower version ?????
any help would be much appriciated.
if it matters,
i'm running Duttys HG, and ive flashed to hardspl,
i don't mind flashing back to whatever, i just really need the handwriting app
The handwriting SIP is likey hidden.
There is a reg edit to unhide, just search SIP Reg Edit and you should find it.
If I recall it was under the WM general tweaks.
thanks for that, i got the letter and block rec working, but still not the transcriber the reg key shows it should be showing, but i think the actual file may not be there,
fixed after changing the reg, and downloading the update, you then need this transcriber cab
http://forum.xda-developers.com/showpost.php?p=3661845&postcount=47732
result
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
TheNorthSideWhiteGuy said:
Any luck finding a way to get 6.1 working on this phone? I just bought the Pure from AT&T as a replacement for my LG Incite that had 6.1 on it. So far I can't stand 6.5 at all. My main beef is with IE, I really like the one on my Incite vs. this one. And my other problem is with the start menu, I also prefer the drop-down style in 6.1.
Thanks for any replies or help.
Click to expand...
Click to collapse
Start here.
Once you unlock your phone, you can flash to anything you want.
6.5 is hands down better than 6.1, there are 6.5.219xx builds that have the drop down start menu.
Thanks Bruce!
For some reason I couldn't find a good Pure forum, so that link helps a lot.