Related
Good Afternoon
I had a new TyTN II Delivered from orange after mine was nabbed at the weekend, and i locked it remotely. When i make a call now all is hunky dory, but whilst in that call if i go to press START for example nothing will happen, so again i try another way and press X to go to the today screen to then press start, Nothing happens.
I inform my caller ill call them back, and end the call by either pressing "End Call" or pressing the Red Button, and then instantly the Back light defaults to a very low setting, and it did NOT do this on my previous TyTN II.
I have spent a fair while looking through here and google (and also MoDaCo Forums) trying to find a solution. I only know of one other person on MoDaCo who has the problem, and i have tried hard reset on the device too to no avail.
It is a Orange HTC TyTN II, so i have called them also for advice and they know about as much about it as i do.
This is a plea for someone here maybe to lend me a hand and sort this out, otherwise its going to collide with the nearest large surface in the next few days ha ha.
Thanks again for reading, and I hope someone can help me!
Sean Saunders
screen off
I select don't blank/turn screen off in a call, as I often want to enter dtmfs for mailboxes, or conf calls, downside uses a bit more battery
Hi mgr2003.
I have these options set, and it doesnt make a blind bit of difference unfortunately. I was hoping for some kind of CAB file for a fix? I dont know whats wrong with this device but its not as good as my previous TyTN II.
Sean
This question keeps being asked about once every week since the TyTNII came out. Sorry, but it is getting a bit annoying....
Once again: it´s caused by a bug in the HTC ROM and happens when a device password is set and the backlight times out during a call. Solution: disable the device password or - if you want to keep the password - push the power button twice after a call and you are back in business.....
That would be an all well and good answer but i do not have a password set on my device, so the answer doesnt justify?
Cheers for the Advice though.
Sean
I also have that problem with my tilt....when i am on a call the screen turns off..How can i disable this?
In that case I apologize for my somewhat rude reply. Your problem description just seemed to fit that bug exactly....
Sorry, have no idea what else may be causing that behaviour. Good luck, and if you manage to fix your issue be sure to let us know!
Did you use Kaiser Tweak to disable fast sleep?
Hi
I havent done anything to the device, it is exactly as shipped by OrangeUK. Its only 3 days old now, so not even had a second to do anything but use it.
Sean
I have an Orange TYTN II and this bugged me too.
Download Kaiser Tweak http://forum.xda-developers.com/showthread.php?t=333898
Follow instructions on thread and disable Fast Sleep (advised)
Normal Backlight and Power Settings will still be active
from several days ago whem i touch in diamond icons never select the one i touch!!!... It selects the icon on left or right but never the right one....
When i have a phone call i select the green icon and it turns the phone off
What can i do?
I aligned the screen thousands of times, i installed the different calibrators and nothing.
I align screen, it works well for a few seconds and becomes crazy again. I soft reset, a tried everything i remember and always the same.....
Obvious question: Did you Hard Reset?
Try a hard reset.
If that doesnt work then it sounds like the screen is screwed, get the unit swapped.
I've just installed a new rom! I think i have to swapp the unit
The problems are the same. Anything more i can do??
If you just installed a new ROM, did you do a hard reset? To me it sounds as if the calibration for the touch sensor is off. The first thing that you do after a hard reset is calibrate the screen.
So you can try to calibrate the screen, bofore doing the hard-reset.
You can but when you hard reset you just have to do it again
Also, you could check your local optician for any additional problems.
No, but honestly, a hardreset and recalibration should fix the problem. I'm aware that GNes/GSen can give some problems if it thinks it has rotated the screen, but I've never seen that occur outside programs that don't rotate the screen by themselves.
If that doesn't work, Sync it, back it up, whatever you want to do, possibly flash to stock and return it to whereever you bought it/HTC to get it swapped.
thank's everybody... I tried it all and the same. Going to swapp
have the same problem.. it wasn't there before, had the phone for 3 month.. i think it has to do with water under the screen, used it in the rain and then it began to behave this way (due to the big speaker hole maybe?) , it works fine otherwise! Any idea how to fix it? waterdamage? - guarantee or what?
I think it´s wierd if you can´t use it when it´s raining..?
joel78 said:
I think it´s wierd if you can´t use it when it´s raining..?
Click to expand...
Click to collapse
How many phones can be used risk free in rain?
i don't think that's the problem. no water in my phone, rain or other....
i think it started after gsen installed...may be wrong, or else or.....
Very little chance Gsen having anything to do with it. Many people are using that (including me) with no ill effects.
Hmmm, I though I was the only one with this problem. I'm on the second unit now, the first one always do soft reset by itself after every few wake up. Now the alignment always gone off after few minutes of use. I'm waiting for the replacement unit now.
Initially I thought it was because of the ROM update I did, but even after I restore the original ROM, it still happen.
Looks like I'm quite unlucky with the Diamond .
problem solved!!!!
gone to look for assistance.
After 3.30 hours new touch screen and they sad to me new components inside.
For now all good. Till when??....
hope it was the last problem
So its a guarantee issue? - bad components inside?
It still works ok, so i wait to send it away..
till now all ok.
Loving the Diamond... but big issues have come up and they are starting to make it difficult to really use the device. I am trying to determine if the issues I am having are brought on by myself or if the issues are related to some challenge with the phone or my carrier.
"What's the issue," you ask?
The Diamond will not pick up a call. The phone will ring, the caller display will come up, I'll try and pick it up by either pushing the onscreen command or pick it up via the pick-up button... nothing. The call rings through to voicemail. Meanwhile I have to call the person back who just called me. Massively irritating and even more irritating it's does actually pick up SOMETIMES. The problem is I cannot determine why it works sometimes and why it does not. 90% of the time it does not work. When I do get it to work all I need to do is activate my bluetooth headset and then turn it back off and we are back in the same situation where the phone will not answer, however, this time... the phone does not RING either! Yes that's right - all sounds go bye bye on the phone when I activate BT and then turn it off. Also, I cannot pick up the phone with bluetooth headset. I can hear the phone ring through and everything looks dandy but no go! Push the pick-up button - nothing. This isn't such a big deal really - I mean - who cares if it picks up on the BT headset - I just want to be able to answer a call in general!
Now - I do have a lot of applications on the machine from a modifcation perspective and I am thinking this could all very well be my fault. I have Advance Config, Diamond TF3D config, and Diamond Tweak all loaded (each have their own benefit.)
Strange thing is... I just did a test and the phone picks up JUST FINE. I'm about ready to pull my hair out. It's really hard to put my finger on it. Tried it a second time, if I try to answer with the soft key it won't work but the hard key will work. Now the hard key will not actually hang up the call - I have to use the softkey to hang it up. I don't know if anyone is having the same issues but I am to the point of hard-reset to start from scratch.
I actually had the "can't pick up" problem just yesterday, but with my Prophet. Using Pdaviet's MyVista 6.1 Rom and S2U2. The phone rang, S2U2 displaying the full screen call notification, no chance of picking up the call.
Do you also use S2U2?
When you find your self in a hole, it usually helps if you stop digging.
Unpalatable as it might seem, I think with hassles like you've got, a HR is probably your best option.
ps, just a thought, have you at any stage in your tweaking done any button or key re-mapping... either inadvertently or by design? Maybe worth a check before giving up
wow, that's a whole load of issues
I've had my Diamond for about a week now..... and have had none of those issues..... Bluetooth works fine, picking up is a breeze....
what provider are you with?
I remember reading more complaints about sound going bye after Bluetooth use in the early days of the Diamond. Try searching around a bit and see if you can find something. However, seeing your other issues, a hard-reset might not be out of place.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Click to expand...
Click to collapse
By far probably the best advise yet!
The emotional side... aka incredible hulk... came out and punched shift/keyboard number row (pounded rather.) I was thinking in my head, "smash Diamond" and the KB had to take the abuse.
Carrier information for those who asked.
CDMA Diamond on the lovely Telus system (aka - Tel-us, we take your money)
As with all troubleshooting, you need to start from beginning. When you first got the phone, it could answer call. Right? So you need to trace back to what have you done to the phone step by step and to find out when it starts to fail.
Doh... Well I reset the device... seems to work now but something that seemed to be working before was my Zune subscription music from Zune Pass was synching to my mobile device via a Synch Center setup. I was amazed it was actually working... now it's not working So - I get calling back and lose the little trick that was working - Zune Pass DRM music synching with my Diamond... you win some and you lose some I guess doh.
jessiethe3rd said:
Loving the Diamond... but big issues have come up and they are starting to ma...my carrier.
"What's the issue," you ask?........... The call rings through to voicemail. Meanwhile I have to call the person back ............who just called me. Massively irritating and ev............... to hang it up. I don't know if anyone is having the same issues but I am to......... the point of hard-reset to start from scrat.........ch.
Click to expand...
Click to collapse
You should do some research and some reading.
And relax a little before you Fire up and disrupt a Community in peace.
I have the same thing going on now... same programs installed as you.
Is it still working after a hard reset? Did you re-install all the same programs?
Well, I'm on a Telus Diamond, and had the no answer problem, and solved it with a hard reset.. just try it, it doesn't take too much to get everything back to the way you had everything..
If my diamond is in standby mode for awhile and i make a phone call, i don´t hear anything. I must reset my diamond to use it for a correct phone call. Does someone have the same problem and hopefully have a solution? Thanks!
Do know how long it has to be in standby for? And is it reproducable every time?
captainsensible2002 said:
Do know how long it has to be in standby for? And is it reproducable every time?
Click to expand...
Click to collapse
It is different: sometimes 15min sometimes 1h. After a reset it works longer but then i have the same problem again. Just now my diamond was in standby for a 1h and didn´t work correctly.
Using the 1.37 and 1.00.25.03
I tried to upgrade to 1.00.25.05 with the offical htc rom upgrade but always said my battery is less 50% and the installation process stops.
And presumably your battery is over 50%?
captainsensible2002 said:
And presumably your battery is over 50%?
Click to expand...
Click to collapse
Just tried before again. But the same less 50% power warning message and stopping installation issue. My power settings told me 100% fully loaded.
Same problem
Same problem here, drives me crazy. I didn't link the problem to the phone being standby though.
I sometimes have it after receiving a message, sometimes after a whole night of inactivity, sometimes not at all after a day...
But in all cases all audio stops and a soft reset is the only solution...
Related threads (without solutions):
http://forum.xda-developers.com/showthread.php?t=420606&page=4
http://forum.xda-developers.com/showthread.php?t=424648
Same problem here It's only happened after a night of no activity (two nights in a row). I have to soft reset to fix the problem ...
binzelli said:
Same problem here, drives me crazy. I didn't link the problem to the phone being standby though.
I sometimes have it after receiving a message, sometimes after a whole night of inactivity, sometimes not at all after a day...
But in all cases all audio stops and a soft reset is the only solution...
Related threads (without solutions):
http://forum.xda-developers.com/showthread.php?t=420606&page=4
http://forum.xda-developers.com/showthread.php?t=424648
Click to expand...
Click to collapse
here is maybe solution : tested this morning and no problet yet but it's batter to test more days
SOLUTION
Some users of HTC Touch Diamond, the latest Windows Mobile 6.1-powered Pocket PC Phone, may encounter an obscure and weird problem when receiving SMS (also known as text message) while HTC Touch Diamond device is in StandBy mode with LCD screen powers off.
The symptom may be different from phone to phone, but the following scenario roughly describes the problem that faced by HTC Touch Diamond PPC Phone user. When the phone is in inactive stand by mode with screen off, the phone does not notify owner or user when by ringing ringtone or SMS tone sound or audio alert, nor vibrating the device when there is any incoming text message or SMS message. Only 5-way keypad light is blinking.
Sometimes, the device does play sound or vibrate, but not both together. Only keypad light flashing is confirmed to work properly. Some users also reported that if there is already new existing unread SMS text messages on the Touch Diamond phone, then the audio ring tone sound alert and/or vibration then work properly when there is new incoming SMS message.
The issue can cause HTC Touch Diamond owner to miss some important SMS text messages. It appears that the no audio alert sounds and no vibration (not even a delay trigger) issue after receiving SMS or text message is probably not caused by defective phone device, but caused by specific SIM card for unknown reason, as the issue happens intermittently, and may not happen when changing to different mobile service provider SIM card. One SIM card that been identified is Hong Kong SmartOne SIM card.
For HTC Touch Diamond who facing the no alert been made on incoming SMS while in stand by mode issue, but can’t change the SIM card, here’s a few possible resolutions that may fix the problem.
First of all, make sure that the phone is correctly configured to playback audio or sound alert or vibrating. Go to Start Menu, then select Settings. On Personal tab, tap on Sounds & Notifications, and go to Notifications tab. In the “Event” drop down list, select Messaging: New test message. Verify that either Play sound or Vibrate or both is selected.
On the same screen (Notifications), as a workaround to fix the issue, try to tap to tick the check box for Display message on screen.
If above resolution doesn’t help to make the phone notifies you via sound alert or vibration when receiving text message while in sleep mode, another possible fix is to enable SMS Wake Up Event. To do so, download and install a registry editor on the HTC Touch Diamond Windows Mobile device (such as PHM Registry Editor, see workaround to install PHM on Windows Mobile 6). Navigate to the following registry key branch:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL
Locate DisableSMSWakeUpEvent entry, and change its value to 0 (the value is 1 by default).
All else fails, you may have to try to perform a hard reset on the HTC Touch Diamond, and send the device to HTC service center for repair or exchange
Did you document this yourself or find this info somewhere? I would be interested to know where its come from, if possible.
captainsensible2002 said:
Did you document this yourself or find this info somewhere? I would be interested to know where its come from, if possible.
Click to expand...
Click to collapse
http://www.mydigitallife.info/2008/...to-notify-when-receiving-sms-in-standby-mode/
I have the same problem, except that this happen after i use the BT headset profile (all sound output is redirected to bluetooth headset, and it seems that it won't revert back to original profile after you turn off BT profile) :S
at this moment since my tests my diamond is well
no sound problem
4 HOURS and no sound problem !!!
it will be ok if nothing bad until tomorow
well, thats fair enough if you were experiencing the issue normally within that time.
Was that just from enabling the SMS wake up?
That setting can be changed with Diamond Tweak/Advanced Config/TF3D Config if nobody fancies editing the registry by hand.
captainsensible2002 said:
well, thats fair enough if you were experiencing the issue normally within that time.
Was that just from enabling the SMS wake up?
That setting can be changed with Diamond Tweak/Advanced Config/TF3D Config if nobody fancies editing the registry by hand.
Click to expand...
Click to collapse
YES WITH TF3D_Config_0.6.7 youcan match in tweaks tab
WAKEUPONNEWSMS
AND
NOFACEDOWNMUTERING
enjoy, Ive tested yet and all is ok !!
I prefer wai ting until tomorow
oh no !!!!!!
i let my diamon switched on all night and this morning .... no sound !!!!!!!!
I will return my baby to SAV for reparation, but I don't know how many time i'll waiting and I'm worry about finding the same problem when my phone will be back
I had a feeling this might happen...
I've a new one since yesterday and no problem !!!
I'm very happy
I had to send mine in for repair
Has anybody found a solution for this? My Samsung Blackjack II is constantly experiencing this (although soft resets don't fix it - I have to hard-reset and recover from backup). Any help welcome.
I have same issue but the soft reset does not work. I had Mighty Rom 4.8 on it at the time and so I tried flashing back to Bell stock rom but problem persist. Read somewhere flashing to a 6.5 rom might help but not in my case. I tried Mighty 6 rom with no luck. I still have sound though when I plug in my headphones so I'm thinking the speaker may have just died on me? Might have to reflash to bell stock and relock and return as there doesn't seem to be a fix if there is one yet.
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.