How to cid unlock?? - Wing, P4350 Herald Upgrading

Hi.
I have a new HTC P4350 on english, but i want to put a spansh rom on it. I have read a lot and only found that i have to do a cid unlock, but i don´t know how to do it.
Someone can help me?
Thanks a lot

WIth a herald, you don't need to CID unlock.
You can use Aserg's method.
Search it in this forum.

Thanks
Let me see if i understand. I have to install the "Install ASerg_Policies.CAB", and then y can install the spanish RUU.
Thanks again

These are the instructions from ASERG's method that were included in the text file for the "Here is a TMO Wing Original ROM with TouchFlo added" ROM.
The order of installation OS:
1. To make full backup or only the data necessary to you on SD a card or PC.
2. ActiveSync should be connected and it is desirable as "Guest".
4. Establish ASerg_Policies.CAB (If version OS from ASerg is not established)
5. Start !UPGRADE_ROM.bat also expect end.
6. Make hard reset.

But i don´t have UPGRADE_ROM.bat only the official spanish RUU.
the UPGRADE_ROM.bat use a OS.nb.
Have i to extrack the OS.nb file form the offical RUU?
When i extracted the files from RUU_signed.nbh i got
ATHENA_IPL.nb
ExtendenRom.nb
G4IPL.nb
PrimarySplash.nb
SPL.nb
Radio.nb
Windows.nb
If i rename the windows.nb to OS.nb it will work?
Thanks again

wait....you want to install the RUU? Isn't it like an executable file (.exe)? You juct connect your phone to activesync and run the ruu executable.

fzzyrn said:
wait....you want to install the RUU? Isn't it like an executable file (.exe)? You juct connect your phone to activesync and run the ruu executable.
Click to expand...
Click to collapse
He would then get a CID error, if im not mistaken.
Thats why he asked how to unlock the CID.

Use the search ! this question is been asked and answered almost 5000 times. This forum is getting loaded with more and more of the same questions ...
Go to IMEI-CHECK.CO.UK

I have read a lot and i dindn found nothing for herald.
I read that IMEI-CHECK.CO.UK cid unclok don´t work and when you upgrade your rom with a RUU you get a cid error.
Someone can tell me if i rename the windows.nb (file extrated form the spanish RUU) to OS.nb can i use the Upgrade_rom.bat file?

Yes you can, but one thing.. ATHENA_IPL.nb?? Did you extract the .nb from an Athena RUU? Please do NOT flash this lol. Just donwload the WM6 official ROM. Extract the windows.nb from the nbh. install ASerg policies cab and put Herald in Flight mode. Then run Epgrade_ROM.bat. good luck

Thanks. Yes ATHENA_IPL.nb was one of teh files. It wasent the ATHENA RUU.
I don know what happen but i will going to download the spanish ruu again.

I download HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe again.
And extracted the files form RUU_signed.nbh en get the same files again. Is secure upload these files?
I downloadesd from here http://rapidshare.com/users/5EWZ4
The adress was in this forum bucause the HTP don´t work. When i enter on the download area nothing is avaliable.

ahh stupid me. I meant bootloader. woops.
If he has the spanish RUU, he doesn't need to do any flashing fun, no?

Try using these files if you have an RUU_signed.nbh
http://forum.xda-developers.com/showpost.php?p=1540938&postcount=133

Thanks. I do it without CID Unlock.
I only rename the windows.nb file fom the spanish RUU to OS.nb.
And use the asreg method.
I wait 5 minutes and my Herald now is in perfect spanish.

perfecto!

Gracias.
Solo falta el touch flo, epro no se cocinar Roms.
Así que esperare a ver si algun día sale.

Hi,
Is it possible to flash it to Chinese language?
Thanks.

i think so, but you need a chinese RUU to extrack the windows.nb file.

Related

ROM Upgrade -> Vendor ID Error

Hello! I've tried to change the language on my mda compact2(bought from Austria) from German to English but while installing the T-Mobile 2.6.2.110 UK ROM "Vendor ID error" appears. What should i do? I hope you have solution for my problem thanks
neversummer said:
Hello! I've tried to change the language on my mda compact2(bought from Austria) from German to English but while installing the T-Mobile 2.6.2.110 UK ROM "Vendor ID error" appears. What should i do? I hope you have solution for my problem thanks
Click to expand...
Click to collapse
Extract the Rom file to a folder on your pc.
than download this file: http://forum.xda-developers.com/attachment.php?attachmentid=30778&d=1160429997 and Extract it into the Rom folder.
than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
that should do the trick.
shayd said:
http://forum.xda-developers.com/attachment.php?attachmentid=30778&d=1160429997
that should do the trick.
Click to expand...
Click to collapse
This archive says that the file is corrupted Anyway, i found some posts of Ulymanchild who had the same problem as me so here is his solution:
1.Down load HTC_Charmer _upgradeut_noid
2.http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
3.Download Any Charmer ROM Utility.
4.Extract nk.nbf from the Charmer ROM Utility.
5.Place nk.nbf to the HTC_Charmer upgradeut_noid.
6.Get the upgrade with no ID Errors.
7.GOT TO LOVE IT!
Unfortunately, i can't do
3.Download Any Charmer ROM Utility.
4.Extract nk.nbf from the Charmer ROM Utility.
5.Place nk.nbf to the HTC_Charmer upgradeut_noid.
how can i extract nk.nbf
to get the nk.nbf, just open the executable rom package in winRAR
neversummer said:
Unfortunately, i can't do
3.Download Any Charmer ROM Utility.
4.Extract nk.nbf from the Charmer ROM Utility.
5.Place nk.nbf to the HTC_Charmer upgradeut_noid.
how can i extract nk.nbf
Click to expand...
Click to collapse
3. Download Charmer ROM from here: ftp://ftp.xda-developers.com/Uploads/Charmer/Shipped_ROMs/
4. Right click on the file you just downloaded and Extract to an empty folder on your desktop (you will find in that folder the nk.nbf you are looking for).
5. make sure your phone is connected to pc via activesync, copy the file I attached to this post (ROMUpdateUtility_Wizard_NoID.exe) in to this folder, and double click on it.
That should do the job.
It happened waaaaaaaa i'm so happy it is so different(for good)! Thank you all you 're my best friends!
Well, I want to upgrade my rom on htc charmer too. I understand how to, but I have the newest Czech WM5 in only-setup-file rom, how can I extract this ? Or I need only the RARed or ziped roms, so the setup files of roms are unusable ? thanks for help
disn3y said:
Well, I want to upgrade my rom on htc charmer too. I understand how to, but I have the newest Czech WM5 in only-setup-file rom, how can I extract this ? Or I need only the RARed or ziped roms, so the setup files of roms are unusable ? thanks for help
Click to expand...
Click to collapse
Do you want to upgrade from Czech to WWE?
When you right click on the setup file, do you have the extract option?
Hi, i can't make upgrade of my charmer. I do all steps that you say and romupdate program says that hi can't open the requested file (error 208). Any ideas?
use the RUU from here
http://www.windowsceportal.hu/tartal...adeut_noid.zip
i have same problem with htc p5500 how to solve? error vendor id
please very urgent
one question please:
is it possible to use HTC_Charmer upgradeut_noid to upgrade hard spl
i have ID ERROR IF I UPDATE THE ROM and i have an other error if i update spl ..
how do i get the rom the link its not working
Please help me! I have the WM6.1 ROM made by vlodeck and nocturne on my MDA Compact II.
I want to downgrade to WM5. With shipped roms i can't, coz i get Vendor ID error ofcz. If i wanna use the Charmer AKU2 upgrade, then it says, that i need another updater (error no.: 300). If i use the noid one, then it says something about missing files, and tells me to re-download the updater. I did it but it still says the same. Please help me, its very important. Thx : andor44
rickyB83 said:
one question please:
is it possible to use HTC_Charmer upgradeut_noid to upgrade hard spl
i have ID ERROR IF I UPDATE THE ROM and i have an other error if i update spl ..
Click to expand...
Click to collapse
Hi!
I think there is no hardspl for Charmer.You can CID unlock it easily with lokiwiz02,if your IPL,SPL is V1 or V2(f.e.:2.26).
Post the error code with noid or post a screenshot.
BR
Scootie
lito21 said:
how do i get the rom the link its not working
Click to expand...
Click to collapse
Hi!
Which ROM do you need?
The last link seems working:
http://www.tm-phonedownloads.com/dm_compact2_sw.html
CID unlock first!!
After installing AKU3.3 you can't downgrade to AKU2.
BR
Scootie
andor44 said:
Please help me! I have the WM6.1 ROM made by vlodeck and nocturne on my MDA Compact II.
I want to downgrade to WM5. With shipped roms i can't, coz i get Vendor ID error ofcz. If i wanna use the Charmer AKU2 upgrade, then it says, that i need another updater (error no.: 300). If i use the noid one, then it says something about missing files, and tells me to re-download the updater. I did it but it still says the same. Please help me, its very important. Thx : andor44
Click to expand...
Click to collapse
Hi!
Weird,because cooked ROMs usually can't be installed on CID locked devices.
Try to CID unlock it with lokiwiz02,then retry upgrade with AKU2.
Post IPL,SPL!
BR
Scootie
I have CID unlocked it before installed WM6.1... But it doesn't matter anymore. A user called 'rmagyar' solved my problem in PM.
andor44 said:
I have CID unlocked it before installed WM6.1... But it doesn't matter anymore. A user called 'rmagyar' solved my problem in PM.
Click to expand...
Click to collapse
Good news!
Could you share the solution here to help others with the same problem?
(Örülök,hogy sikerült.Használd egészséggel!)
BR
Scootie
scootie said:
Good news!
Could you share the solution here to help others with the same problem?
(Örülök,hogy sikerült.Használd egészséggel!)
BR
Scootie
Click to expand...
Click to collapse
Well i don't know the exact source of the problem . I'll upload a proper fix-kit for people who messes up something...

Help With CID-Unlock

Hi to all.
Mi Mteor have SPL2.05 and is application unlocked now.
The instructions says that i have to get hardSPL-1.40 in order to can CID-UNLOCK the device. Where i donwload it?
When i run the AUTO_Unlock_v3a.bat , the device no reboot in bootloader mode. Only get a blank screen.
Please, help me.
Yhanks. Sorry for mi bad english.
just read wiki and other posts here... it is still explained here...
you have to enter the bootloader a nother way.. because when using the normal cid unlock file you use a herm enterbl.exe ...
but i prefer to use sspl and not to supercid the device...
I read it. Perhaps i don´t understand everything, because english is not my primary language.
I see the are two metods to unlock the sim and CID. Supercid or SSPL.
I want to unlock the sim and update the rom.
Thanks a lot.
for simunlock just look into the threads in the past here... (pages on bottom of forum) ... theres somewhere explained how...
maybe i have also entered some infos in wiki...
for updating rom the easiest way is to app unlock the phone (to launch unsigned apps -> wiki) and then copy the sspl files to phones root...
a *.lnk file a exe file and a rom file...
launch the lnk file and then start the update you want!! ...
with the sspl method your phone is for one! start and only for that one! supercided! so that means you can install any rom ... no matter what provider is the rom from..
also you can flash than cooked roms... with no cid inside... (like my german rom...)
but remember ... when flashing because what ever not work, and you cant boot the phone up to relaunch the files... you have a problem when you don't own a, in your case so far i can see, a Vodafon Shipped Rom for Breeze...
innocent here in forum has the problem... vodafon gives no shipped rom out...
maybe you can ask them from different sides .... my vodafon partner here in austria (a1) did not offer the breeze... so i can't ask them... (i work in the co company...)
steve

ERROR [244] INVALID MODEL ID how to get the solution.

when I flash my t-mobile wing. the RUU shows ERROR [244] INVALID MODEL ID
is there any one can help me?
Thanks in advance
Is your device HardSPL'd?
and don't mind the spam guy. Actually, consider yourself lucky. Very rarely do they choose your post as a spam receptacle
Thanks mate, what do you means "Is your device HardSPL'd?"
IPL: 4.17.0002
SPL: 4.70.YANG
please check. why I can not flash my WING with that ROM
But I can flash my wing with os.nb
what's the problem?
asergs method bypasses the cid lock
check your pm
can you post Aserge solution here please?
aserg's method is an outdated way of flashing a rom. It was used in the earlier roms posted on the forum (like the one jimmysong tried to flash)
to use, you will need to find the cab pack for it. Check some of the older touch-it roms for the cabs (especially the non-wm6.1 ones like touchit 2)
from there, remove the os.nb file. Use nbh extract to extract the windows.nb file from an .nbh file that you get after you download a rom. rename that to os.nb. and place that in the folder that the original os.nb was in.
follow the instructions very closely and TO THE LETTER. When using aserg's method to flash, nothing will happen. Or so it seems. Be patient until the .bat prompts tell you that it's ok to hard reset your phone.
Tmobile Wings error flashing spanish rom
Jimmysong said:
when I flash my t-mobile wing. the RUU shows ERROR [244] INVALID MODEL ID
is there any one can help me?
Thanks in advance
Click to expand...
Click to collapse
Same problem with Tmobile Wing, always gives me this error, i have Hardspl my device it has the 4.70Yang this file is the one i am using HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe , any help please?
Thanks in advance mates!
Try this;
http://forum.xda-developers.com/showthread.php?t=409425
You can't flash the stock RUU after HardSPL'ing your phone. (You both have HardSPL.) The RUU tries to write over the SPL (which is called HardSPL for a reason...) and it also expects the CID to match the default tmobile RUU.
If you want to go back to a stock ROM you have two options.
Extract the os.nb out of that RUU (which is what Rick GM is talking about) and recreate the NBH without the SPL or use USPL to bypass the CID check.

How to flash NL version on UK version Herald

Hi Guy's,
I bought a UK version of the Herald. But I want to have the NL (Dutch) version to be flashed on my phone. I have both RUU's from the HTC website. I used SPL and NZB method, but both time it is whining about "this installer isn't made for this phone" or something. is there another way?
you will need the following things- USPL for herald, 7-zip, both RUUs
1.unzip the USPL to wherever you can find it
2. install 7-zip, right click on the dutch ruu, go to the 7-zip submenu, and click "extract here"
3. you will be left with a bunch of files, among them "ruu_signed.nbh". Drag this file into the "RUU" folder which is inside the USPL "flash center" folder. DO NOT drag SPL.nbh
4.Run the USPL after plugging in your phone.
5. If you somehow mess it up, put your phone in bootloader (hold camera key while softresetting) and run the UK ruu.
That trick does ONLY work with non-official roms. Too bad the official roms are still not changeable, because they still give the invalid vender ID.
Is there an option to extract the roms and exchange the dutch language? It's just that I need to have a rom with a Dutch language, no matter what rom.
did you try the above process? It SHOULD work, as long as you leave out the SPL.nbh

Xplode help me...

xplode,
can you help me downgrade my BA (O2 Xda iis)??
this is the ROM:
wm6.5 (build 21169.5)
MODEL NO.: PH20B
i want to downgrade it to its default ROM wm2003 SE...
but i can't remember it's rom version...i only know that it was from O2 UK...
i downloaded the O2 UK 1.40.242...
but when I tried, it said "Country ID Error"...
may I should try the other O2 UK rom...
could you give tips or tell what's wrong?
thanks in advanced...
sorry if this disturbs you...
once you had a cooked rom from this forum, the country id changes to WWE. that's why on the first attempt to upgrade, many people experience a country id error.
what you have to do is, downgrade the same way you upgrade, don't just click the big .exe file, unpack it, and put the maupgradeut_noid in there and put your device into bootloader mode before starting the actual downgrade. that way you bypass the check of the device id, country id a.s.o
thanks chef!!!
but how will I unpack it?
usually, when you download the official shipped rom from your carrier or from xplode's firmware archive. it will come as one exe file of forty something MB. but that is not an exe like a normal executable, it is a self-extracting archive, which can also be extracted manually, but right clicking it, and then saying extract here or something similar, depending on the zip program you have installed, like winrar, or 7zip. and in that folder you will find the official RUU (with baupgradeut) and the roms nk.nbf (wm2003 rom), ms_.nbf (the extrom) and radio_.nbf (the radio rom).
and there you can start customizing.
1st you need the maupgradeut_noid, which you used to upgrade your device, since that bypasses some security features, like the country id, you should also think about whether or not to flash the old radio, if you don't want it, just delete it from the folder, same thing for the extrom.
thanks...
I've extracted the file...
will I just do the same procedure as I did when I upgraded my BA?
put my BA to bootloader mode, run the maupgradeut_noid then let the program do the work?
exactly!
you know, when you first upgraded the device from wm2003 in your local language with your country code to an english WWE wm6.5 you changed the country code of the device, that is why, on the way back, you need to bypass the check again.
but just as you said, bootloader mode and maupgradeut_noid do the trick.

Categories

Resources