Hi Guy's,
I bought a UK version of the Herald. But I want to have the NL (Dutch) version to be flashed on my phone. I have both RUU's from the HTC website. I used SPL and NZB method, but both time it is whining about "this installer isn't made for this phone" or something. is there another way?
you will need the following things- USPL for herald, 7-zip, both RUUs
1.unzip the USPL to wherever you can find it
2. install 7-zip, right click on the dutch ruu, go to the 7-zip submenu, and click "extract here"
3. you will be left with a bunch of files, among them "ruu_signed.nbh". Drag this file into the "RUU" folder which is inside the USPL "flash center" folder. DO NOT drag SPL.nbh
4.Run the USPL after plugging in your phone.
5. If you somehow mess it up, put your phone in bootloader (hold camera key while softresetting) and run the UK ruu.
That trick does ONLY work with non-official roms. Too bad the official roms are still not changeable, because they still give the invalid vender ID.
Is there an option to extract the roms and exchange the dutch language? It's just that I need to have a rom with a Dutch language, no matter what rom.
did you try the above process? It SHOULD work, as long as you leave out the SPL.nbh
Related
What ROM upgrade utility should we use if we want to flash an HTC Wizard with one of the ROM's on the FTP?
For example, I have a K-JAM that I might want to flash with the 8125 ROM and Extended ROM (I'm actually interested in the Radio ROM, too...)
Thanks in advance for any help that's given!
the generic upgrade procedure software is INSIDE all rom packages (they are named RUU, rom upgrade utility).
If you want to upgrade using a dumped rom (.nba file) you should use the generic aWizard utility. be careful with using these .nba files as you never know what is is exactly and there is no check if the file will damange your device or not (ruu does checks beforehand)
Hi.
I have a new HTC P4350 on english, but i want to put a spansh rom on it. I have read a lot and only found that i have to do a cid unlock, but i don´t know how to do it.
Someone can help me?
Thanks a lot
WIth a herald, you don't need to CID unlock.
You can use Aserg's method.
Search it in this forum.
Thanks
Let me see if i understand. I have to install the "Install ASerg_Policies.CAB", and then y can install the spanish RUU.
Thanks again
These are the instructions from ASERG's method that were included in the text file for the "Here is a TMO Wing Original ROM with TouchFlo added" ROM.
The order of installation OS:
1. To make full backup or only the data necessary to you on SD a card or PC.
2. ActiveSync should be connected and it is desirable as "Guest".
4. Establish ASerg_Policies.CAB (If version OS from ASerg is not established)
5. Start !UPGRADE_ROM.bat also expect end.
6. Make hard reset.
But i don´t have UPGRADE_ROM.bat only the official spanish RUU.
the UPGRADE_ROM.bat use a OS.nb.
Have i to extrack the OS.nb file form the offical RUU?
When i extracted the files from RUU_signed.nbh i got
ATHENA_IPL.nb
ExtendenRom.nb
G4IPL.nb
PrimarySplash.nb
SPL.nb
Radio.nb
Windows.nb
If i rename the windows.nb to OS.nb it will work?
Thanks again
wait....you want to install the RUU? Isn't it like an executable file (.exe)? You juct connect your phone to activesync and run the ruu executable.
fzzyrn said:
wait....you want to install the RUU? Isn't it like an executable file (.exe)? You juct connect your phone to activesync and run the ruu executable.
Click to expand...
Click to collapse
He would then get a CID error, if im not mistaken.
Thats why he asked how to unlock the CID.
Use the search ! this question is been asked and answered almost 5000 times. This forum is getting loaded with more and more of the same questions ...
Go to IMEI-CHECK.CO.UK
I have read a lot and i dindn found nothing for herald.
I read that IMEI-CHECK.CO.UK cid unclok don´t work and when you upgrade your rom with a RUU you get a cid error.
Someone can tell me if i rename the windows.nb (file extrated form the spanish RUU) to OS.nb can i use the Upgrade_rom.bat file?
Yes you can, but one thing.. ATHENA_IPL.nb?? Did you extract the .nb from an Athena RUU? Please do NOT flash this lol. Just donwload the WM6 official ROM. Extract the windows.nb from the nbh. install ASerg policies cab and put Herald in Flight mode. Then run Epgrade_ROM.bat. good luck
Thanks. Yes ATHENA_IPL.nb was one of teh files. It wasent the ATHENA RUU.
I don know what happen but i will going to download the spanish ruu again.
I download HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe again.
And extracted the files form RUU_signed.nbh en get the same files again. Is secure upload these files?
I downloadesd from here http://rapidshare.com/users/5EWZ4
The adress was in this forum bucause the HTP don´t work. When i enter on the download area nothing is avaliable.
ahh stupid me. I meant bootloader. woops.
If he has the spanish RUU, he doesn't need to do any flashing fun, no?
Try using these files if you have an RUU_signed.nbh
http://forum.xda-developers.com/showpost.php?p=1540938&postcount=133
Thanks. I do it without CID Unlock.
I only rename the windows.nb file fom the spanish RUU to OS.nb.
And use the asreg method.
I wait 5 minutes and my Herald now is in perfect spanish.
perfecto!
Gracias.
Solo falta el touch flo, epro no se cocinar Roms.
Así que esperare a ver si algun día sale.
Hi,
Is it possible to flash it to Chinese language?
Thanks.
i think so, but you need a chinese RUU to extrack the windows.nb file.
when I flash my t-mobile wing. the RUU shows ERROR [244] INVALID MODEL ID
is there any one can help me?
Thanks in advance
Is your device HardSPL'd?
and don't mind the spam guy. Actually, consider yourself lucky. Very rarely do they choose your post as a spam receptacle
Thanks mate, what do you means "Is your device HardSPL'd?"
IPL: 4.17.0002
SPL: 4.70.YANG
please check. why I can not flash my WING with that ROM
But I can flash my wing with os.nb
what's the problem?
asergs method bypasses the cid lock
check your pm
can you post Aserge solution here please?
aserg's method is an outdated way of flashing a rom. It was used in the earlier roms posted on the forum (like the one jimmysong tried to flash)
to use, you will need to find the cab pack for it. Check some of the older touch-it roms for the cabs (especially the non-wm6.1 ones like touchit 2)
from there, remove the os.nb file. Use nbh extract to extract the windows.nb file from an .nbh file that you get after you download a rom. rename that to os.nb. and place that in the folder that the original os.nb was in.
follow the instructions very closely and TO THE LETTER. When using aserg's method to flash, nothing will happen. Or so it seems. Be patient until the .bat prompts tell you that it's ok to hard reset your phone.
Tmobile Wings error flashing spanish rom
Jimmysong said:
when I flash my t-mobile wing. the RUU shows ERROR [244] INVALID MODEL ID
is there any one can help me?
Thanks in advance
Click to expand...
Click to collapse
Same problem with Tmobile Wing, always gives me this error, i have Hardspl my device it has the 4.70Yang this file is the one i am using HTC_P4350_SPA_4.17.412.2_4.1.13.44_02.94.90_Ship.exe , any help please?
Thanks in advance mates!
Try this;
http://forum.xda-developers.com/showthread.php?t=409425
You can't flash the stock RUU after HardSPL'ing your phone. (You both have HardSPL.) The RUU tries to write over the SPL (which is called HardSPL for a reason...) and it also expects the CID to match the default tmobile RUU.
If you want to go back to a stock ROM you have two options.
Extract the os.nb out of that RUU (which is what Rick GM is talking about) and recreate the NBH without the SPL or use USPL to bypass the CID check.
I unlock my htc fuze to a newer version, but I have to send my phone back in so that I can get another one. I want to know what do I have to do so that the phone can be and ATT version so that I will not be charge for unlocking my phone and how?
use the search function
"UPDATE: STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from this post.
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+6. to verify, volume down + reset, see version number on tricolour screen, should now just say 1.90.0000.
that's it."
From: http://forum.xda-developers.com/showthread.php?t=410150
xplode,
can you help me downgrade my BA (O2 Xda iis)??
this is the ROM:
wm6.5 (build 21169.5)
MODEL NO.: PH20B
i want to downgrade it to its default ROM wm2003 SE...
but i can't remember it's rom version...i only know that it was from O2 UK...
i downloaded the O2 UK 1.40.242...
but when I tried, it said "Country ID Error"...
may I should try the other O2 UK rom...
could you give tips or tell what's wrong?
thanks in advanced...
sorry if this disturbs you...
once you had a cooked rom from this forum, the country id changes to WWE. that's why on the first attempt to upgrade, many people experience a country id error.
what you have to do is, downgrade the same way you upgrade, don't just click the big .exe file, unpack it, and put the maupgradeut_noid in there and put your device into bootloader mode before starting the actual downgrade. that way you bypass the check of the device id, country id a.s.o
thanks chef!!!
but how will I unpack it?
usually, when you download the official shipped rom from your carrier or from xplode's firmware archive. it will come as one exe file of forty something MB. but that is not an exe like a normal executable, it is a self-extracting archive, which can also be extracted manually, but right clicking it, and then saying extract here or something similar, depending on the zip program you have installed, like winrar, or 7zip. and in that folder you will find the official RUU (with baupgradeut) and the roms nk.nbf (wm2003 rom), ms_.nbf (the extrom) and radio_.nbf (the radio rom).
and there you can start customizing.
1st you need the maupgradeut_noid, which you used to upgrade your device, since that bypasses some security features, like the country id, you should also think about whether or not to flash the old radio, if you don't want it, just delete it from the folder, same thing for the extrom.
thanks...
I've extracted the file...
will I just do the same procedure as I did when I upgraded my BA?
put my BA to bootloader mode, run the maupgradeut_noid then let the program do the work?
exactly!
you know, when you first upgraded the device from wm2003 in your local language with your country code to an english WWE wm6.5 you changed the country code of the device, that is why, on the way back, you need to bypass the check again.
but just as you said, bootloader mode and maupgradeut_noid do the trick.