Related
On the nokia's when in a call u can use dtmf which will dial a number in ur phonebook whilst on the phone... i've tried this on the xda but dont know where or how to do it.... can any1 tell me how i go about getting this done?
Thx in adv.
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
I've always found that you can just dial numbers while you're in a call, you just use the... dialpad. :/
I had one contact which dials one of those 0870 numbers for cheaper international calls, someone pointed out to me that to get the phone to pause inbetween dialing a number, you could setup a Contact with commas to achieve a pause (I think each comma pauses the dialing for about a second)... So I have 0870234821,,001598238 (for example, the numbers aren't real numbers, but you get the idea).
I've always found that I can just dial on the keypad if I'm in a call though, you just dial and it dials the DTMF. Am I missing a trick here? I've not installed any other dialing software, I'm just using the supplied software, just with the default skin.
i know wot u mean.... but i'm contstantly having to dial numbers whilst in call, so it would be useful to have a tool that will allow you to do this rather than dummying number and having a pause for different dtmf's
shaice said:
http://dialdtmf.sourceforge.net/
"dialDTMF a Pocket PC (Pocket Contact) plugin to dial telephone numbers using DTMF's (aka Dual Tone Multi-Frequency)"
s
Click to expand...
Click to collapse
i've tried this software but whilst incall, it doesnt trigger off... am i doing something wrong.
I see what you mean...
... Here's a thought; how about recording some combos of DTMF tones to predefined wave files, and triggering them on the phone whilst you're in a call? There's a chance the phone might pick them up as they're being played, and relay them down the line... Just a thought for this morning, one I've not tried in practice yet, but it might work.
it is good to use.
i use short tone and delay time change to 50ms.
nice !
thanks a lot
Can't get dialDTMF to work. The tones are played when I go to contacts -> dialDTMF, but only when NOT in a call. If I'm in a call and try to use dialDTMF nothing happens after I pick either work/home/mobile number.
Or am I using this tool the wrong way?
Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
Hi! I am looking for a call filter program that can filter all unwanted or no number incoming calls, I tried photo contacts pro but its slow & sometimes the caller can't hear anything for 1 to 2 seconds repeatly during the conversation. I also tried MagiCall, this program is simple & nice but it can't hang up the no number calls, instead it will pass these calls to my voice mail box directly. It has a option "pick up/hang up", this works what I want but will waste the air time. So anyone can suggest a call filter program to me that can directly hang up the no number calls? Thanks!
Call Firewall
thanks for your reply, I've seen the features of this program but it doesn't mention it can block no number call or not? Do you know it has this feature or not? Thanks!
uh, sorry, can't help you there. I only HAD this program in some of the ROMs I used, never actually USED it.
And auto-rejecting no-number calls would have killed it in my book anyway, because the phone central in my office randomly removes id from outgoing ones, and so I would never receive business calls, lol.
Ask around, or better yet, try searching the forum for impressions/reviews. I know Laurentius26 uses this app in some (if not all) of his ROMs.
[EDIT]
That's what I found in the description:
Features & Options:
a. Accecpt all calls - pretty self explainatory
b. Accept call from My Contacts only - accepts calls from contacts only, others are rejected
c. Reject all calls - pretty self explainatory
d. White List - accepts calls only from the white listed nos
e. Black List - accepts all call except from the black listed nos
f. Black List Pattern - any no STARTING from the black list pattern list is rejected.
for eg. if you enter "123", so all nos STARTING from "123" will be rejected
this is a very nice option with which you can block nos from any particular network, country, city , area or whatever you can think of.
Besides, there is a check window for "Reject unknown/private calls"... I'd call it a YES, then
CallBlock
I use callBlock from WISH solutions to block a list of callers. It works well and it does not have to answer and hang up.They mention that it can block no number calls but I have not tried it for that. Here is the link:
http://www.wishsolutions.com/products.html
Good luck!
Just tried the Call Firewall, it can block no number calls, but transfer the call to voice mail box directly. Anyway thanks for your suggestion
actually, this CallBlock looks like it offers a few ways of blocking the call... See picture at this address
Block method: dropdown list... Wonder what's in there? researchermd, can you check and let us know?
call firewall works just fine. I use it to block unknown or private numbers.
In addition, you can use your network settings for call barring and block numbers that aren't in your phonebook if you want the extra security of blocking numbers.
The screen you provided should be "CallBlock Ringtone Edition" which is make for palm. For the PPC version, there has no such option can be found
Please any body know of any dailer app that can send numbers automatically as dtmf string i.e to make international call using prepaid card I have to write down the phone number then input it manually after entering the card pin. Most mobiles have this funtion but not Winmo.
Do you mean you want a app thats creates sound out of the speaker in DTMF off a contact??
If you need that i have a contactmgr plugin for that!
(Sorry for my bad englisch)
scenario: I have a prepaid phone card to make an international call. The card has an access number and pin. To make a call, i must first dial the access number, enter the pin after the voice prompt then lastly my destination phone number. I dont want to key-in each number seperately. I want a dialer that would permit me through pop-up menu to search for destination number in contact list then another pop-up menu with option to send number or contact found as DTMF. Most mobiles and cordless phones have this function why not winmo?
Check out this post:
http://forum.xda-developers.com/showthread.php?t=442580
^_^
-A-
Hi,
My brother and his wife share the same house phone number.
When I call my brother, the phone shows her contact information.
The same happens to other contacts. When I call my wife at home, my contact info shows up during the "call".
People with the same phone numner:
Jan Nissens
Nadine Van den Abbeele
Tom Nissens
Yasmine Nissens
With default Dialer from TyTN II:
When I call Jan at home, it dials Tom
When I call Nadine at home, it dials Tom
When I call Yasmine at home, it dials Tom
When I call Tom at home, it dials Tom
Doe someone else experience this?
Or even better: who has the solution to this problem?
Patrick
You have stored the same nr. on youre brother and hes wife, you need to change what is the main nr. Like now its the house nr. So when you call youre brother, he got the same nr. as youre brothers wife.
Give the troubled contact order to call cell nr. as default instead.
I don't understand your solution. Can you be more specific?
Patrick
nissensp said:
I don't understand your solution. Can you be more specific?
Patrick
Click to expand...
Click to collapse
You have saved more than one contact on the same phone number. When you want to dial one of them the other shows as contact as they share the same number.
Indeed, that is the problem. And do you have a solution?
Patrick
he already stated his solution
you have x listed as same number as home
you need to make y the same number but not save it as their home number.
two diff contacts, same number, save one as home and the other contact as something else like "pager, work2, etc...
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
nissensp said:
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
Click to expand...
Click to collapse
SPB are the ones you want to ask to improve the interface if the solution works normally as stated with WM, to be honest i would just put a contact as say Mat & Shaz if they lived together or as you have since my brain would communicate to me and say they live together and i know who i'm calling...
Merging them into 1 contact isn't a good idea:
- I can't store the birthday for each of the contacts
- They have 2 kids, so there is a total of 4 persons with 1 home phone number
- I want to be able to know who i called before (I tap on the corresponding person to call the home number).
Patrick
nissensp said:
I'm afraid that this will not work properly with spb Mobile Shell. I can call Home, Work and Mobile. But all these numbers all occupied.
Maybe Microsoft (developer of Windows Mobile) or HTC (customiser of Windows Mobile) has to come up with a solution.
Patrick
Click to expand...
Click to collapse
They are not going to adapt to SPB Anyways, make contacts like this then:
Wife Home, Wife Work, Brother Home, Brother Work. Yeah you will have more contacts instead of all numbers in one, but you will not have problem calling them.
nissensp said:
Or even better: who has the solution to this problem?
Click to expand...
Click to collapse
Given that HTCs default Sim Manager/Contacts program automatically labels all of my imported from the SIM phone numbers, as Cell Phone numbers (even landline ones) and there seems to be no way to correct this during a batch import (I'm not going to go in and edit each one), I'd have little faith in a software solution but you could dictate to your friends that they all install multiple numbers at their homes and have them individually assigned for your ease of identification
Seriously though, if you want them still to be friends, there's no simple way to get around this problem as the Caller ID information that comes into your phone specifies a phone number and that number is tied to a contact (or several in your case). How is the phone to know which contact is on the other end of the phoneline actually making the call? HTC hasn't developed a crystal ball plugin
@Flying Kiwi
I'm not referring to incoming calls, but to outgoing calls.
Patrick
HTC bugs
nissensp said:
@Flying Kiwi
I'm not referring to incoming calls, but to outgoing calls.
Click to expand...
Click to collapse
Sorry for misunderstanding you. Although your post is titled with 'calling', I just couldn't see where the real problem lay as you already know who you're calling because you looked it up in your contacts and tapped it. Although another name may subsequently be displayed on the phone, that's one of the problems with HTCs software (along with incorrectly assuming all imported sim contacts are cell phone numbers). Short of re-writing that code yourself, I know of no way to fix it. You'll be better off keeping all your birthdates and 'finer details' elsewhere IMO. Personally, although I dabbled in using the 'onboard' contacts, I now only use sim contacts.
The other people who have posted here look to have provided plenty of workarounds but it's HTC (or spb) that would need to fix the software to get things exactly how you want it. I suggest that you report this to them and see what they have to say about it.
I have a fix for this; hopefully this will work in your country too.
For my sister I store the home number as 0123456789p1
For my brother-in-law I store the number as 0123456789p2
The "p" tells the dialer to pause and this is then treated like a different number. the number after the "p" is (in the UK) ignored and so can be any number you like.
Unfortunately, on my TyTN II it doesn't work.
My wife and myself have the same home phone number. I added "p1" to my home number and "p2" to my wife's.
But when I call my wife at home, it still shows my contact while dialing!
I also softreset the TyTN II, but it didn't work.
That's sad, and it means it's HTC which cannot handle "p1" and "p2".
Patrick
Workaround works for me
nissensp said:
Unfortunately, on my TyTN II it doesn't work.
My wife and myself have the same home phone number. I added "p1" to my home number and "p2" to my wife's.
Click to expand...
Click to collapse
Did you add the p1 or p2 etc at the end of the number? I tried this on mine and it worked perfectly. Yes the HTC software has its bugs but this seems to be a good workaround as long as your network copes with the p1 etc. If it's dialling out ok then that's a very good sign. Perhaps your ROM may have different abilities but my standard setup copes with the rjcb23 workaround perfectly - just a shame I have no need to use it!
I managed to find another trick.
I replaced p1 and p2 into #1 and #2
A big thank you to rjcb23 for giving the hint for adding p1 and p2!
Patrick