Related
Hello all. I have successfully installed BB Connect 4.0.84 on my Kaiser and it is up and running...both my BES and BIS accounts. Fairly smooth.
Question - whenever I suff the Internet or update my RSS feeds with Insight, it kicks the BB Connect "off" (disconnects) and uses MediaNet. Then I have to go in and "force" BB Connect back on. A bit of a PITA. I have an unlimited BES plan from AT&T...do I need to set the Connection types to be something else now for these other programs that need to access the Internet?
Any help you could provide with you greatly appreciated.
Thanks!,
Adam
yes go into the connection settings. then go to advanced and select networks and set both to My Isp or which ever one your BES\BIS connects to.
There is a new one now (not just MediaNet) tha is called "My Blackberry" but when I select that one none of the other Apps connect to the internet. Once when I select MediaNet do they connect. They actualyl disconnect the BBerry,connect themselves, and then a bit later the BBerry appears to re-connect on its own....so this may work out to be ok.
Thanks - much appreciated.
welp sorry to say bud thats how that is going to work then... BES must use its own network settings and the MediaNet for internet uses another sorry your stuck unless entering in the settings for wap.cingular by hand and not using MediaNet work for BBC
I too have BB Connect installed on my Kaiser. I am able to get emails successfully over Blackberry and gmail. However, I cannot use Internet explorer over MediaNet. GoogleMaps, the weather plugin, QuickGPS, etc can all get the data they need when connected through MediaNET but IE will not load any webpages.
Any thoughts on how to fix this? There are no options to config connections within IE and the connection within settings seems to be correct (how else would the other applications be able to use MediaNET?).
Note:
I can launch BIS for internet explorer and use the Blackberry connection instead of MediaNET. Obviously though this is not optimal as BIS has lmited sites, low res pictures, etc.
This is not really in the right forum. THere are a couple of BBC threads in the other Kaiser forum that address your question directly. Go there and search for blackberry. You'll find them.
issue kaiser w/ bbconnect
Hello,
I have a kaiser and the bbconnect installed on it but when I want to activate it, all my today plugins disappear and I can't find them in the today setup anymore.
Does anyone have an idea?
I'm in France but I don't think the issue comes from that.
I need it for my job and at the moment i'm totally held so please help me if you can.
Thanks in advance
Hi People
This is my first post so go easy on me!
I’m having problems sending mail using smtp on my tytn II. (error message says check network coverage and account info is correct). I have both wifi and HSDPA connections and I’m pretty confident I have all the account setting correct as it works on my old HP4150.
Everything else works fine i.e. web, windows live, exchange and as it works on my old HP this proves account settings are correct and my ISP servers relay SMTP. Anybody experienced any problems like this or have any advice.
Ta
During your setup of the email account, there is an option ( I think under advanced server settings or ??) but you choose which connection the phone should use (i.e. Media NEt, My ISP...whatever) make sure you have it set the a real Internet connection.
grizzley said:
During your setup of the email account, there is an option ( I think under advanced server settings or ??) but you choose which connection the phone should use (i.e. Media NEt, My ISP...whatever) make sure you have it set the a real Internet connection.
Click to expand...
Click to collapse
Yep, it's set to "internet connection" I’ve also tried the other connections types and they all have the same effect i can receive mail via pop3 fine but can't send it!
I've also tried disabling wifi, and just using the HSDPA and vice versa.
What is so strange is it works fine on my old HP4150!
What network are you using and what email provider?
Tom Williams said:
What network are you using and what email provider?
Click to expand...
Click to collapse
isp = demon.net and their smtp address is post.demon.co.uk and i'm using i'm using a 3 contact sim.
when you added the emal account did you enter the details yourself or did you ask the device to scan for the settings for itself?
Did you get the device from 3 or was it on another network before?
custom said:
isp = demon.net and their smtp address is post.demon.co.uk and i'm using i'm using a 3 contact sim.
Click to expand...
Click to collapse
You know things are getting bad when you start replying to your own posts!
Anyway i've just setup a google mail account for pop3 use and that works fine. Which kinda points to my ISP mail account settings but doesn't explain why they work fine on my HP4150!
Ok, but that doesn't answer the question I asked.
Anyway the second comment does. I would check the SMTP server as that does nto sound like an SMTP server to me, that looks like the incoming server personally.
Otherwise I wonder if its worth trying the generic 3 smtp server? If they have one.
Tom Williams said:
when you added the emal account did you enter the details yourself or did you ask the device to scan for the settings for itself?
Did you get the device from 3 or was it on another network before?
Click to expand...
Click to collapse
The 3 setting were done automaticly by the network wizard, the email account details were setup manually and the device is HTC sim free and unlocked.
Ok. Thats simple enough.
Does the demon email account need SSL or anything?
Tom Williams said:
Ok, but that doesn't answer the question I asked.
Anyway the second comment does. I would check the SMTP server as that does nto sound like an SMTP server to me, that looks like the incoming server personally.
Otherwise I wonder if its worth trying the generic 3 smtp server? If they have one.
Click to expand...
Click to collapse
Here are the demon setting, they work fine on my HP, and on outlook 2007 on my desktop machine.
http://http://www.demon.net/helpdesk/technicallibrary/misc/numbers/
I'll see if i can fine some 3 server setting and give thoughs ago.
Tom Williams said:
Ok. Thats simple enough.
Does the demon email account need SSL or anything?
Click to expand...
Click to collapse
Not to my knowledge and i have tried switching in on and off and it made now difference!
I'm really not getting anywhere with this fast! I've done a hard reset just in case any other programs are settings were causing problem and i still can't get it to work!
I've also managed to setup my pop3 account on a N95 and that works fine just like my HP4150 does, it has to be something on the tytn!
I used to work for Thus/Demon a couple of years ago, strangely enough. Their SMTP server only accepts incoming connections from Demon IP ranges - you can only send if you are connected using a Demon connection. i.e. this would only work if you are connected at home over wifi.
I just tested this from my work computer and this is still the case - I got an SMTP 550 error saying the service is unavailable from [my work IP address]. This would explain why you can't connect over HSDPA, but wouldn't explain why you can't connect over wifi at home.
You could try downloading PocketPutty and try using telnet to connect to post.demon.co.uk on port 25 - it should give you a more meaningful message than simply telling you your connection is not working.
hicks said:
I used to work for Thus/Demon a couple of years ago, strangely enough. Their SMTP server only accepts incoming connections from Demon IP ranges - you can only send if you are connected using a Demon connection. i.e. this would only work if you are connected at home over wifi.
I just tested this from my work computer and this is still the case - I got an SMTP 550 error saying the service is unavailable from [my work IP address]. This would explain why you can't connect over HSDPA, but wouldn't explain why you can't connect over wifi at home.
You could try downloading PocketPutty and try using telnet to connect to post.demon.co.uk on port 25 - it should give you a more meaningful message than simply telling you your connection is not working.
Click to expand...
Click to collapse
That might explain a few things, Thanks, We use demon as our work ISP to and i've only tested my HP4150 and N95 at the office and at home. I do get the 550 error in the rejected email from demon also! But as you say you would expect the tytn to work on wifi and i have tried it with phone turned off.
Well if its any consolation i've never managed to send a single email since I bought my device. I'm on T-Mobile in the UK and my ISP is Nildram, and I can check email from any POP3 account just fine, but when I try to send anything I get the same error message as you. I've tried every conceivable combination of phone settings, connection settings, SMTP servers and NOTHING has ever worked. Thought I was missing something obvious but now im not to sure!
That makes me feel a little better! I think i'm gona do a bit more digging and see if i can find a work around.
I was thinking of maybe trying a newer radio rom to see if that has any effect.
What IP address does it say after the 550 error? You might not want to share it here for security reasons but www.samspade.org will let you do a whois on it. This will let you know if the device IS actually connecting on the demon connection, or if for some reason it is not.
Sorry I've made a slight mistake, The 550 relay not permitted email only occurs if i switch off "outgoing server requires authentication" there are no IP address attached to this.
With authentication on a window pops up on completion of sync saying "The message could not be sent check network coverage and that account info is correct"
I've just tried to use pocket putty and to be honest i think it might be a bit out of my league! I tried to open a telnet connection on post.demon.co.uk port 25 and just got a black screen!
Hey Guys,
I recently have been experiencing syncing issues with my AT&T Tilt to my works Exchange server. It was working fine up until two weeks ago. Now, when I sync, it just hangs - status bar on my tilt shows no progress as if its trying to communicate.
I tried the following:
1. Delete the configuration settings on my phone and reconfigured it with the appropriate Exchange information.
2. Deleted the mobile device profile via Web Outlook.
3. Flashed the newest TILT rom from HTC.
I still can not get it to sync over AT&Ts network for some reason. The really odd thing is that it will sync with my works Exchange server only if I sync up with my home PC. Some how it uses my network connection at home to sync with Exchange?
Did something happen on AT&Ts network were I can not reach my works IP? There are a number of WM devices at work who are on Sprint, Verizon and nextel. They are fine and dandy. Pretty much all the AT&T phones are suffering this problem.
Any ideas?
It could be the access point you are using WAP.CINGULAR vs. ISP.CINGULAR (do a search for these, you'll get alot of info).
The quickest route I think would be to call AT&T. It doesn't seem to be your hardware/OS, since you just reflashed. It doesn't seem to be your exchange server since others can access it.
Exchange Activesync is supported by AT&T, and they should be able to walk you through all the required settings and/or answer if there is anything on their side that may cause the issue.
True, you will probably have to deal with their tech support, but it might be a quicker fix to spend an hour on the phone then wait for more information from here.
Hi, I have used this site for around 2 years, and often found answers…..however, this one I cant get round…I hope someone can help..here goes :-
Have tried the following on all of these ROMS
RUU_Diamond_HTC_WWE-ME_1.93.456.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe
SwiftBL-WWE-Diamond-ROM-v2-0
SwiftBL-Diamond-ROM-v3-0
When trying to sign into MSN Messenger I don’t even get to the “enter Name/PW” section, it simply says “There was a problem signing you into messenger. It may be the service or you may be in a place with bad reception. Please try again later”
When trying to add a mail client (hotmail) I enter my ID/PW and then it says it has found the settings for Hotmail. I press next and it says that again it cant connect
When trying to sign into Windows Live it says it cant connect
I have evoked IE and opera to ensure I have internet connection
If I turn on WIFI, all connect perfectly.
I have not only tried the different Roms, but also tried other versions of Windows live cabs with no luck
Can anyone help?
I've only tries the TLR rom but i have the same issue, cannot connect using GPRS or 3G but connects fine using Wifi or via ActiveSync. Im also on Tmob
its to do with T-Mobile, they have limited the connection you get when dialing from the handset.
I had the same problem. You can phone T-Mobile and see if they can sort it out for you.
Cheers,
re Phoning T-Mobile
I did phone T-Mobile, and they said its not to do with them. I used to have the MDA Compact III and that works with MSN etc, and if i turn that phone back on with my tmobile chip, it works, so guess it isnt T-Mobile, unless they can block specifc requests from specific phones?
paulcharles1 said:
I did phone T-Mobile, and they said its not to do with them. I used to have the MDA Compact III and that works with MSN etc, and if i turn that phone back on with my tmobile chip, it works, so guess it isnt T-Mobile, unless they can block specifc requests from specific phones?
Click to expand...
Click to collapse
i was having problems with my MDACIII, thats when i found out it was T-Mobile.... dont use 3G or GPRS anymore, just WiFi, so cant say if it happens on my Diamond...
I just had a fiddle around and i may have fixed this issue.
Settings - Connections - Connections - Click Manage existing connections - Proxy settings tab - Untick "this network uses a proxy"
I can now sync my hotmail fine.
Re Proxy / connection settings
wahoo - thats fixed it
Thanks alot James, i will no longer throw the phone out of the window
Excellent
Paul
Have a t-mobile mda compact iv(t-mobiles diamond version)you cannot do this fix on it because the internet connection is disabled by t-mobile from altering manual,it says it is preconfigured and manual setting is disabled.very clever of them
yeh
UPDATE
http://www.microsoft.com/windowsmobile/mobile/wl/download-en-us.mspx
just installed live messanger from this microsoft site(a new version just released) and it works a treat on the t-mobile compact iv(diamond).only problem no messanger is included,this wasnt a problem for me because i had a stand alone version i purchased a few years back,i installed it and it worked ok
ljames28 said:
I just had a fiddle around and i may have fixed this issue.
Settings - Connections - Connections - Click Manage existing connections - Proxy settings tab - Untick "this network uses a proxy"
I can now sync my hotmail fine.
Click to expand...
Click to collapse
This did not work for me. In fact all my internet stopped working!
If anyone has he original proxy setting IP address kindly post it here for me.
That is UK T-Mobile proxy setting...
149.254.201.132
You can just redo the connection wizard also
Sure you didnt untick "This network connects to the internet"?
ljames28 said:
I just had a fiddle around and i may have fixed this issue.
Settings - Connections - Connections - Click Manage existing connections - Proxy settings tab - Untick "this network uses a proxy"
I can now sync my hotmail fine.
Click to expand...
Click to collapse
This worked for me on ProjectDiamond rom. Had to switch to GPRS for setup, but switched back to 3g after and now it syncs fine.
ljames28 said:
149.254.201.132
You can just redo the connection wizard also
Click to expand...
Click to collapse
Yep, thats what i did after posting the message, then went off to do something else so didnt reply on the forum.
ljames28 said:
149.254.201.132
Sure you didnt untick "This network connects to the internet"?
Click to expand...
Click to collapse
Nope, followed the instruction to the letter!
Also when I was using the standard T-Mobile ROM this following worked...
http://forum.xda-developers.com/showpost.php?p=2422579&postcount=14
But now I’m using a custom ROM, I cannot get it to work...
Just a quick update, I too got it working!
You got to turn off 3G in the Comm manager, reset, then remove proxy setting, reset again, then syncronise via GPRS, then switch on 3G in the Comm manager, then reset then it should work!
You can probably reduce the number of soft resets, but that is what I did so left it in there...
As my hotmail and messenger is now working, im not going to fiddle with it. But if someone is still having issues could you try disabling HSUPA. Keep HSDPA enabled.
I know that I have disabled this somewhere along the way and it might be playing a factor in getting the above mentioned apps to work.
For people who have custom ROMs only it can be found in Settings > Connections > Advance Network Icon.
Post back here if you have any success for others to try...
Everything is working for me straightway whether it's the stock or the latest htc rom. I didn't have to fiddle with any settings.
I found this issue about 3 weeks ago, internet completely stopped working so i contacted T-Mobile and they said they were having issues and it would be fixed within a couple of hours, since it came back up some sites worked, some things wouldnt, my push email wouldnt work. Ended up unticking the proxies and it started working again perfectly have found i've had to do this with every ROM reflash so i think they perhaps have changed something at their end which is causing some issues.
i've been getting the same problems for about a month, funnily enough its only when boss changed account from normal to web and walk (had a 800 phone bill as thought wnw was enabled on the account already!)
tried disabling the proxy and it still fails sync'ing, the weird thing is that it does actually sync SOMETIMES.. ie i wake up in the morning and it has randomly synced once or something. so god knows what tmobile are up to
I have the MDA compact IV, Im using Dutty ROM V 1.5. had the same problem with MSN messenger and hotmail, contacted the T mobile support but they could not help me.
Now everything is working following just disabeling the proxy
But Im still not able 2 make the MSN 2 work on my laptop when I connect 2 the internet using the mobile phone! is there a fix for this problem?
when I try 2 connect I get this error: we were unable to sign u into windows live messenger, possibly because of a problem with your internet connection. please tru again later.
error code: 80072745
I don't know how it works on Windows but in Linux I have to transport MSN through HTTP mode when I'm connecting over T-Mobile . Is there a way to do that in Windows?
Similar issues here. When the proxy setting was enabled, I couldnt connect to either hotmail or gmail. When I disabled, gmail started working fine but so far I have only managed to sync with hotmail once!
I wish there was an easy fix for this because its a pain in the rear!
Hi all, I have a strange problem and wondered if anyone could think why it won't work.
I am trying to get access to my work FTP server via andFTP. Now it works fine on my home WiFi (so not an internal external issue) but can't get it to work over the 3G. Does anyone have any idea why this may be or am I just best off trying a different client?
If it doesn't work on 3G, then it's because you haven't forwarded your FTP port in your router. When your phone is connected through 3G, it is outside your local network.
And then you also need to know your "outside" IP address. (Google my IP)
And then thats the IP you need to connect to in andFTP.
ZigmaDK said:
If it doesn't work on 3G, then it's because you haven't forwarded your FTP port in your router. When your phone is connected through 3G, it is outside your local network.
And then you also need to know your "outside" IP address. (Google my IP)
And then thats the IP you need to connect to in andFTP.
Click to expand...
Click to collapse
Thanks for the reply. Just to clarify though it is definately working externally as I can access my works FTP server fine from my home via wifi, even though they are on completely different networks so I know the routing and forwarding etc. is correct from the FTP server end. I just cant work out why it wont connect over 3G.
Can you login to your FTP from work? Or just outside your own network?
It is not the same that you can connect to an outside FTP, that it is to connect from the outside to your internal FTP.
You need to forward port 21 in your router to your FTP server's IP address. Otherwise it wont work.
ZigmaDK said:
If it doesn't work on 3G, then it's because you haven't forwarded your FTP port in your router. When your phone is connected through 3G, it is outside your local network.
And then you also need to know your "outside" IP address. (Google my IP)
And then thats the IP you need to connect to in andFTP.
Click to expand...
Click to collapse
I can log-in internally when connected to WiFi, I can log-in externally when connected to WiFi, I can't log-in via 3G at all (SocketException). I may well try another FTP client, any recommendations.
So if you connect to a WiFi that isn't your own, you can still log in?
If that is so, then I guess they might have blocked FTP transfers over your 3G network.
It works on mine, thats why it sounds wierd to me, and the only difference is more or less the mobile company.
ZigmaDK said:
So if you connect to a WiFi that isn't your own, you can still log in?
If that is so, then I guess they might have blocked FTP transfers over your 3G network.
It works on mine, thats why it sounds wierd to me, and the only difference is more or less the mobile company.
Click to expand...
Click to collapse
spot on... after trying a new FTP client and that not working I have done a bit of digging on the web and it seem's t-mob uk block FTP transfers. Anyone else on the same provider confirm this?
That sucks
Try to call t-mobile and ask them if this is just a bug, or if it was intended.
tell me about it! Gonna give them a ring when I get five minutes although I can imagine the call now...
Me: Hello, I cant seem to access FTP via my mobile internet.
T-Mob: Whats FTP???
Me: Could you please open Port 21 so I can access my work files.
T-Mob: No, but did you hear about the great new services you are entitled to for just £xx a month...
cyberkid2002 said:
spot on... after trying a new FTP client and that not working I have done a bit of digging on the web and it seem's t-mob uk block FTP transfers. Anyone else on the same provider confirm this?
Click to expand...
Click to collapse
FYI, I can ftp my home ftp server no problems over T mobile network using AndFTP.
It could well be how they have you set up, and what package you are signed up for, If you got a G2 from tmobile, I was told there is a specific set they have for you if you have a G2
thanks for the info Higgsy...
As an update to this I have just gotten off the phone to T-Mobile CS and have to say they were very helpful. Although the guy was unsure at first why it wan't letting me get through to FTP he suspected it could be due to not having 'web n walk plus' (£7.50 per month instead of £5). Due to a long wait he added this to my account free of charge.
The problem hasn't gone away yet but he did say it could take up to 24 hours to go through.
Will keep this post updated and let you know if it gets sorted.
I thought it might be that, I used to get this issue trying to access certain things on my old e71 when I had standard web and walk set up. I was actually told by a tech support guy, who was also very helpful that the G1/G2 needed a specific web and walk/account set up.
a quick update to this and 24 hours on unfortunately the upgrade to w+w plus doesnt seem to have fixed things, have decided to give this a miss now and wait for something like a dropbox app to come along.
On the plus side I yet again mentioned my poor internet speed (was averaging around 300-350kbps) so he had a look at the account. Despite being told on several occasion before there was no issue he had a look at the profile assigned to the account and found that, surprise-surprise, I was being throttled at 3g speeds. A few minutes and a phone reset later I am getting speeds in excess of 1500kbps! Hurrah!
I'm not sure what AndFTP's default is, but maybe you want to check that you are using passive mode (it's in the Advanced tab).