I have had problem after problem with the various comm managers out there. From blue tooth issues to inoperability of WLAN. As of now I have uninstalled the add-ons but the comm manager is void of icons and probably is not working. WLAN is not connecting at all. It seems that something remaining from the add-on is keeping it from enabling since I did a hard boot and so it connect for about 3 seconds. How do I get the default ATT comm back?
Thanks,
Dan
If you have a handy backup, it's your life saver. Otherwise, hard reset will bring back the default Comm Manager. FYI, here is a 10 buttons that works on Tilt http://forum.xda-developers.com/showpost.php?p=1430168&postcount=3. you dl the last one "For 10 Button CommManager with 3G Only and GPRS Only switch", unzip then install "for the others.."
I did a hard reset and it DID NOT bring back the comm. I stupidly had not been backing up.
I installed a 10 button comm newer than the link you gave and meant for the exact device I have, not a general one. And it was programmed by the same guy. I do not think installing that one will do the trick.
I make this CAB with default parameters of my black CommManager...
Test it and post the results if you want. I have used in the past in my TyTN II to revert to default CommMamanager after testing other CABs out there, and works fine for me.
Good luck.
Ok you rock. It looks like it worked. It doesn't look like the original Tilt comm but it appears to have the same finction and it accomplished my objective. The problem I was having was with the WLAN. I was able to load up some of the other comm's but I could not turn the WLAN on and off. It would stick one way or the other. After loading that cab I was finally able to switch it.
It all started while I was on the car trying to take a call through the blue tooth. The blue tooth rang but the phone is what picked up. After that the comm went mostly black. Uninstalled the comm and the default comm did not come back and some of the functions of the other comm seemed to remain in the registry.
I am still looking for a comm that has internet sharing as a button instead of wireless modem. I downloaded one that had it in the picture but when installed it actually had Modem instead.
Thanks
Yes, I had downloaded & installed "10Buttons for Hermes" and my wifi function button died, then I loaded the "Kaiser.CommManager.10Button.3GOnly.Switch.For.Other." wifi function comes back as the orginal. Now everything works as it should, plus I can turn on/off 3G to save the batt. BTW, my tilt runs on Helmi cooked ROM Big storage (based on att&t)
Just found another thread to fix WLAN button; post #23: http://forum.xda-developers.com/showthread.php?t=332438&page=3
Good luck to you.
Loading that cab still disables my wifi. I guess I have to modify the reg directly. What is the best way to regedit? Is there a program already on the tilt?
Now when I load JCES's cab I lose the icons again. I am going to go ahead and do a restore. Something I should have done before I started all the cabs but I am an idiot. I did a restore after JCES cab fixed the problem.
Related
It seems logout has updated his WM5 ROM.
This is based on TuMa 1.4 but with the pre-installed applications removed to speed things up a bit.
I've no idea what's changed since 5.4.01 as there's no readme/changelog and don't have time to test it right now.
hi have download and tried this rom, but stop im middel off upgrating on my BA stop over 40%
wait for more info..
I upgraded successfully to this ROM just now. I was using the old Logout rom, so I hope this is a bug fixing update.
Will post feedback when I test it out.
WM2K5 V5.4.03.HN (V5.4.02.HN only in Vietnam)
ftp://xda:[email protected]_Updates/Logout/Logout_WM2K5_5.4.03_HN.rar
New:
- RamDisk32 and change some path to RamDisk (IE temp file, Mail attd file ...)
- MS BT Stack. (BT headset didn't test)
- Add sms alert Fix
- Add Disable Cert.
- FlightMode App
- Backup
- Task manager
- SoftKeyEx
- Change reg and replace some file from Hima 2.03 (Thank Bepe, Tofclock)
- Ext_Rom autorun
- And some app from Ext_rom
EDIT MDAIIIUser
Moved file to safe place corrected link
Hi logout,
I have to say you nailed this version nicely. fastest ROM ever.
good work dude. keep it up. thanks you.
imatrix
Agreed. This is a really fast ROM.
Congratulations Logout, you just won the speed crown that used to be held by Ivan v4R2.1.
One bug I've spotted with the inbuilt taskmanager - don't use the "cpu usage" option in the menus. It hardlocks the Today screen, only a reboot returns things to normal. This is not a fault of the ROM though, and I'm otherwise really pleased with this new taskmanager, waaay more detail.
When I use Logout previous version 5.4.01HN, i tryin to use my XDa2s as a USB modem, when i choose wireless modem in program and change connection type from serial to USB like the documentation from wiki, and click start, but its shows error and I cant use my XDA2s as USB modem.
And can you teach me how to connetc internet using incoming and outgoing port on blootoh ini your newest ROM.
Thanks Mr. Logout you the best.
I am testing this ROM and, as the latest one, is really fast. The only problem I've found by now is that the phone suddenly after a soft reset refuses to start. Clicking on the antenna icon shows it is "Out of service", and there is no way to make it work again but hard-resetting the device (losing everything in the process, of course).
Maybe I'm doing something wrong? Can anybody help here?
Anyway, thanks for your work Logout.
thanks a lot
let's enjoy and debug it!!!
Great So Far!
Well, so far:
* excellent speed
* the voice speed dial works great with my Jabra 250 BT, HOWEVER it seems when I'm in a call only the audio out works on the hands free, you have to put your mouth next to the phone mic to have any chance at the conversation. Further testing pending
* active sync worked flawlessly
* Bluetooth still does not remain on during standby :-( ... the never ending curse continues!
that's all the testing I have for now, will try some more, but so far so good!
Thanks... logout ... i love u rom... Great job!
Thanks for Sharing
:evil:
hi, all
i have reflash by ba an d now everything is ok..
just like to say that the speed is fantastic on this rom... thanks
and seens to be very stable.. i will continue test and report if i find a issue.
thanks again.
great ROM, but, after soft reset, it looses the time and settings(various registry changes i make like registering resco explorer and some other apps). WMP10 behaves a little odd in beginning of any song.
But, as said above, the ROM is indeed stable and works like a charm irrespective of the bugs mentioned above
kudos to LOGOUT
thingonaspring said:
Taskmanager - don't use the "cpu usage" option in the menus.
Click to expand...
Click to collapse
Task manager I extract from Hima 2.03, maybe CPU USAGE work in BA not well. Download new version & copy to windows\
If use backup built-in to restore data, after restore don't press OK to reboot immediately - wait a few minute to update registry then reboot.
A couple of things that I have noticed...
First of all.. Well done... The Rom seems to be very stgable, and damn fast!
OK.. a couple of bugs... (well.. maybe just me being an idiot!)
First.. I love the way that you have set the Ext_Rom to automatically install.. however.. why have you included the rst command in the config file?? would it not be easier to leave it out, and then power off and soft reset manually?
Second.. MS BT Stack & Wireless Modem.. Works great, about 85% of the time, and then reconnects saying PPP link protocol not connected in Windows.. hmm.. a quick radio reset and then it works again. It even connects WITHOUT the Wireless modem software!! (However, you need a soft reset or to activate flight mode to switch the phone back on!
SPB pocket Plus works fine,
The camera driver seems to work better than other versions i have seen, however i cant play back files that i have previousely recorded. They just show a series of still images!!
I installed a few games and stuff as well.. BTW Netfront 3 didnt work for me!
Keep up the good work!
Greetz from Malta..
Juggles
Soryy, I found another bugs when i tryin WIFI in my class today. When I turn off, it on again, and again.
WiFi
Hi Logout
I installed your new version and started with testing. It's fast (exept PIE, but nothing new) und seems stable.
On my device, I got several problems with wireless:
Cradle-Issiue:
When my device is connected (and running) to the pc and I plug out the usb-cable, wifi won't work. Wireless is connected to my access-point, but no traffic, when trying surfin or sending/receiving.
When I power off the BA and then plug out the cable, wifi will work after powered on the BA. I use these also to prevent a soft-reset when I forgot to power off before unpluging.
Allways resuming:
When the device is powered off, while wifi was enabled, wifi will restart automaticly after power on. When wifi is disabled, it will also be restarted after the next power on.
The work-around for this: Set the "ResetOnResume" (HKLM\comm\tiacxwln1\Parms) Value to 1. For me its working.
Does anybody know, if the new ms-pushmail-service could be added on a BA?
Thanks for your work
Chris
PH20B
ROM: 5.43.HN.WWE
Radio: 1.15.00
Prot.: 1337.45
hi logout..
afther of 1 day off testing, the ongly issues i found is the wifi, afther i put im on, it stays on... . i will trie the solucion off chrischi.
and afther i take out the BA of cradel, i need to close activesync, becouse if i dont do this, afther i clic on power button, he after 1 minute, resumes im self on.
but is very stable, on morning i dont close activesysnc and put my BA on pocket. afther a few minutes i take im and a lot off programs if on i ongly need to close everything and put im again on pocket
i ongly made a soft-reset becouse off wifi..
thanks
Great rom Logout!
I it the fastest ported version, but has some bugs. When you enable speakerphone in phone mode the notification for it stays even after you ended call. I had some problems that i can not enable bluetooth and wifi , then softreset fixed this bug temporary
Crash
After trying to activate or deactivate wireless, my Qtek freezed. I had to softreset the BA:
The phone can't be activated. Also "no service" indicated, when clicking the antenna-icon - the same as bolopez wrote.
Also the Calendar, Contacts & Tasks can't be started (I synched them with the exchange-server). ActiveSync appearing, but not working.
Perhaps the problems could also be caused by activesync. When uncraddling the BA, it allways showed the icon with the two arrows in titelbar like in the state of connected with the pc.
Greetz
Chris
I have an orange tytn II (uk). I recently installed the Duttythroy 10 button
3g Comm Manager, which is excellent. However, since then my kaiser won't go to sleep when it's meant to (i.e. after a time out of a minute). I have to push the on/off button on the side. I've isolated this to the fact that Activesync is running. It runs in the background because I have push email set up. if I turn off activesync manually my pda sleeps perfectly. This was not a problem with the original non-3g 9 button comm manager. Any tips on how to get it sleeping again? I've gone back to the original manager, but the problem persists.
M
snowgum said:
I have an orange tytn II (uk). I recently installed the Duttythroy 10 button
3g Comm Manager, which is excellent. However, since then my kaiser won't go to sleep when it's meant to (i.e. after a time out of a minute). I have to push the on/off button on the side. I've isolated this to the fact that Activesync is running. It runs in the background because I have push email set up. if I turn off activesync manually my pda sleeps perfectly. This was not a problem with the original non-3g 9 button comm manager. Any tips on how to get it sleeping again? I've gone back to the original manager, but the problem persists.
M
Click to expand...
Click to collapse
Tuck it in and sing a nice lullaby!
Anyway, if you just loaded the ROM and haven't loaded all your programs yet, I would do a hard-reset once. It's recommended most of the time after a ROM upgrade. Try that, load the 10-button comm manager again. If the problem persists, hard-reset again and just use the previous 9-button comm manager that worked for you.
I tried singing but that just made things worse! you should hear my voice.
Actually I'm still using the original orange rom, just debranded somewhat with various CABs. maybe that is the cause of the problem. I'm not sure if the 10 button Com manager was designed to be installed on an upgraded rom. If I did a hard reset, would the original factory settings return, or is it possible they have been altered by the comm manager cab?
Matthew
A hard reset will, in your case, return you to the stock O rom that your device came with.
You can then a) set up your sync to get contacts etc back and b) install cabs to customise.
I keep all my favourite cabs in a folder on my micro sd card so I can reinstall if I need to.
yes, I have all of the cabs saved already. I guess it would just mean getting work to set up my push email again, then my device would I guess sync with the server and I'd be back up and running. thanks for the advice.
Matthew
Is it possible to lock out the 3G radio completely on the TILT?
Coming from an Apache on VZW, I was used to being able to change the ModeOfOperation Reg setting and completely locking out the EVDO if I needed to preserve my battery life.
I've tried a number of things on the TILT, but I am not sure which (if any) get me what I want.
I've tried the disableing MEdia Net via KaiserTweak, but when I was in a 3G area it prevented any data connection saying the connection was not allowed (or something similar).
Disabling HSDPA I don't believe is the key either since that is download only.
Again just looking to lock the phone at EDGE/GPRS only. E icon.
**Been Googling
Running the stock ATT ROM, I don't see a BAND page in Settings/Phone/... I've tried exposing it with Schaps Adv. Config Tool, but I still don't see it. I am guessing there is more to exposing this tab than just a reg.
Is BandSwitch the only way?
if u use the 10 button com manager with the 3g switch i would link it but not got time as im at work but search it will be easy to find
Ok I found the 10 button manager on the CABS sticky ...
file name: Kaiser.CommManager.10Button.3GCAB.cab
Are there any known bug/issues with it?
Any TILT issues with it?
I see a few people in an old thread talking about "getting it to work"
I also see Dutty's copy on his FTP site ... "duttythroy 3g comm manager (working).cab"
can anyone comment?
Hi, I use the 10 button com manager on my TyTNII (german stock HTC ROM) and it worked without any issues right after installation.
Greetz,
Hans Olo
EDIT: maybe a soft reset was needed after installation, I can't remember
Ditto - i use it - installed no probs and does what it says on the box so to speak. I have an orange version
try this:
at phone settings /band tab/ change the upper "Auto" to GSM.
pulyka said:
try this:
at phone settings /band tab/ change the upper "Auto" to GSM.
Click to expand...
Click to collapse
thats what the com manager does but on a easy switch baisicly. and no problems on a stock t-mobile uk rom all works fine
pulyka said:
try this:
at phone settings /band tab/ change the upper "Auto" to GSM.
Click to expand...
Click to collapse
This does not show up on my AT&T Stock Rom. Very strange. I do have the 10 button comm manager but it would be nice to do some troubleshooting using the stock WM screens/settings.
Read http://wiki.xda-developers.com/inde...(GPRS & EDGE) modes to optimize battery life!
ckole said:
This does not show up on my AT&T Stock Rom. Very strange. I do have the 10 button comm manager but it would be nice to do some troubleshooting using the stock WM screens/settings.
Click to expand...
Click to collapse
I second that. I do not have this option on my Tilt with the stock rom. Anyone know what's up with that?
Well I used "duttythroy 3g comm manager (working).cab" from the cabs FTP site in the sticky here.
At first it told me the install was not successful because there was an issue with "system permissions". Thinking it was the the CAB itself I tried the other 10 button I found "Kaiser.CommManager.10Button.3GCAB.cab, but got the same.
I did a soft reset, then tried Dutty's again and it worked fine. It required another soft reset after install.
It replaces the stock comm manager with one that looks like it could be from a Touch (from the icons). Works fine and includes a 3G button that was lit. When I tapped the button the icon went dark, the radio looked like it did a little reset (since it went to no signal ... like flight mode) and 10-15 seconds later it came back up locked at EDGE.
Perfect! Thanks for the guidance getting there.
As for those of you with AT&T stock ROMS, AT&T probably had the BAND page removed/hidden in their version. Why? Who knows.
Double post
I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.
how do u know its not on? cant detect wifi?
Is the Wifi antenna icon comes up on the top menu ?
Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.
same here.. any news?...
Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then
Yes.. the wifi is not working ,... the same for the gps...
Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.
hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??
No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.
I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser
zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.
same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know
Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?
wifi working fine on mine
i have no problems at all
huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz
I installed the Advanced Config application a while ago (V2), was looking through it today and decided to add the 3G option to the comm manager and remove the MS push thing, when I saved those my comm manager seems a bit screwed up now no matter what settings I use in the AC application. Can someone advise how to get it back to the defaults.
Thanks
Hard Reset. We do it every day over here!
Before you hard reset try this .cab.....running fine here....
http://forum.xda-developers.com/showthread.php?t=402012&highlight=comm+manager
Thanks, that worked.
What does the Beam setting do? On older PPC's it was the InfraRed, but it doesn't seem to do anything to BlueTooth...
mcvpjd3 said:
Thanks, that worked.
What does the Beam setting do? On older PPC's it was the InfraRed, but it doesn't seem to do anything to BlueTooth...
Click to expand...
Click to collapse
Says it right there in the link I posted.....
"Beam = Turn Beam ON/OFF
When On = your phone can receive files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't."