It seems logout has updated his WM5 ROM.
This is based on TuMa 1.4 but with the pre-installed applications removed to speed things up a bit.
I've no idea what's changed since 5.4.01 as there's no readme/changelog and don't have time to test it right now.
hi have download and tried this rom, but stop im middel off upgrating on my BA stop over 40%
wait for more info..
I upgraded successfully to this ROM just now. I was using the old Logout rom, so I hope this is a bug fixing update.
Will post feedback when I test it out.
WM2K5 V5.4.03.HN (V5.4.02.HN only in Vietnam)
ftp://xda:[email protected]_Updates/Logout/Logout_WM2K5_5.4.03_HN.rar
New:
- RamDisk32 and change some path to RamDisk (IE temp file, Mail attd file ...)
- MS BT Stack. (BT headset didn't test)
- Add sms alert Fix
- Add Disable Cert.
- FlightMode App
- Backup
- Task manager
- SoftKeyEx
- Change reg and replace some file from Hima 2.03 (Thank Bepe, Tofclock)
- Ext_Rom autorun
- And some app from Ext_rom
EDIT MDAIIIUser
Moved file to safe place corrected link
Hi logout,
I have to say you nailed this version nicely. fastest ROM ever.
good work dude. keep it up. thanks you.
imatrix
Agreed. This is a really fast ROM.
Congratulations Logout, you just won the speed crown that used to be held by Ivan v4R2.1.
One bug I've spotted with the inbuilt taskmanager - don't use the "cpu usage" option in the menus. It hardlocks the Today screen, only a reboot returns things to normal. This is not a fault of the ROM though, and I'm otherwise really pleased with this new taskmanager, waaay more detail.
When I use Logout previous version 5.4.01HN, i tryin to use my XDa2s as a USB modem, when i choose wireless modem in program and change connection type from serial to USB like the documentation from wiki, and click start, but its shows error and I cant use my XDA2s as USB modem.
And can you teach me how to connetc internet using incoming and outgoing port on blootoh ini your newest ROM.
Thanks Mr. Logout you the best.
I am testing this ROM and, as the latest one, is really fast. The only problem I've found by now is that the phone suddenly after a soft reset refuses to start. Clicking on the antenna icon shows it is "Out of service", and there is no way to make it work again but hard-resetting the device (losing everything in the process, of course).
Maybe I'm doing something wrong? Can anybody help here?
Anyway, thanks for your work Logout.
thanks a lot
let's enjoy and debug it!!!
Great So Far!
Well, so far:
* excellent speed
* the voice speed dial works great with my Jabra 250 BT, HOWEVER it seems when I'm in a call only the audio out works on the hands free, you have to put your mouth next to the phone mic to have any chance at the conversation. Further testing pending
* active sync worked flawlessly
* Bluetooth still does not remain on during standby :-( ... the never ending curse continues!
that's all the testing I have for now, will try some more, but so far so good!
Thanks... logout ... i love u rom... Great job!
Thanks for Sharing
:evil:
hi, all
i have reflash by ba an d now everything is ok..
just like to say that the speed is fantastic on this rom... thanks
and seens to be very stable.. i will continue test and report if i find a issue.
thanks again.
great ROM, but, after soft reset, it looses the time and settings(various registry changes i make like registering resco explorer and some other apps). WMP10 behaves a little odd in beginning of any song.
But, as said above, the ROM is indeed stable and works like a charm irrespective of the bugs mentioned above
kudos to LOGOUT
thingonaspring said:
Taskmanager - don't use the "cpu usage" option in the menus.
Click to expand...
Click to collapse
Task manager I extract from Hima 2.03, maybe CPU USAGE work in BA not well. Download new version & copy to windows\
If use backup built-in to restore data, after restore don't press OK to reboot immediately - wait a few minute to update registry then reboot.
A couple of things that I have noticed...
First of all.. Well done... The Rom seems to be very stgable, and damn fast!
OK.. a couple of bugs... (well.. maybe just me being an idiot!)
First.. I love the way that you have set the Ext_Rom to automatically install.. however.. why have you included the rst command in the config file?? would it not be easier to leave it out, and then power off and soft reset manually?
Second.. MS BT Stack & Wireless Modem.. Works great, about 85% of the time, and then reconnects saying PPP link protocol not connected in Windows.. hmm.. a quick radio reset and then it works again. It even connects WITHOUT the Wireless modem software!! (However, you need a soft reset or to activate flight mode to switch the phone back on!
SPB pocket Plus works fine,
The camera driver seems to work better than other versions i have seen, however i cant play back files that i have previousely recorded. They just show a series of still images!!
I installed a few games and stuff as well.. BTW Netfront 3 didnt work for me!
Keep up the good work!
Greetz from Malta..
Juggles
Soryy, I found another bugs when i tryin WIFI in my class today. When I turn off, it on again, and again.
WiFi
Hi Logout
I installed your new version and started with testing. It's fast (exept PIE, but nothing new) und seems stable.
On my device, I got several problems with wireless:
Cradle-Issiue:
When my device is connected (and running) to the pc and I plug out the usb-cable, wifi won't work. Wireless is connected to my access-point, but no traffic, when trying surfin or sending/receiving.
When I power off the BA and then plug out the cable, wifi will work after powered on the BA. I use these also to prevent a soft-reset when I forgot to power off before unpluging.
Allways resuming:
When the device is powered off, while wifi was enabled, wifi will restart automaticly after power on. When wifi is disabled, it will also be restarted after the next power on.
The work-around for this: Set the "ResetOnResume" (HKLM\comm\tiacxwln1\Parms) Value to 1. For me its working.
Does anybody know, if the new ms-pushmail-service could be added on a BA?
Thanks for your work
Chris
PH20B
ROM: 5.43.HN.WWE
Radio: 1.15.00
Prot.: 1337.45
hi logout..
afther of 1 day off testing, the ongly issues i found is the wifi, afther i put im on, it stays on... . i will trie the solucion off chrischi.
and afther i take out the BA of cradel, i need to close activesync, becouse if i dont do this, afther i clic on power button, he after 1 minute, resumes im self on.
but is very stable, on morning i dont close activesysnc and put my BA on pocket. afther a few minutes i take im and a lot off programs if on i ongly need to close everything and put im again on pocket
i ongly made a soft-reset becouse off wifi..
thanks
Great rom Logout!
I it the fastest ported version, but has some bugs. When you enable speakerphone in phone mode the notification for it stays even after you ended call. I had some problems that i can not enable bluetooth and wifi , then softreset fixed this bug temporary
Crash
After trying to activate or deactivate wireless, my Qtek freezed. I had to softreset the BA:
The phone can't be activated. Also "no service" indicated, when clicking the antenna-icon - the same as bolopez wrote.
Also the Calendar, Contacts & Tasks can't be started (I synched them with the exchange-server). ActiveSync appearing, but not working.
Perhaps the problems could also be caused by activesync. When uncraddling the BA, it allways showed the icon with the two arrows in titelbar like in the state of connected with the pc.
Greetz
Chris
I have had problem after problem with the various comm managers out there. From blue tooth issues to inoperability of WLAN. As of now I have uninstalled the add-ons but the comm manager is void of icons and probably is not working. WLAN is not connecting at all. It seems that something remaining from the add-on is keeping it from enabling since I did a hard boot and so it connect for about 3 seconds. How do I get the default ATT comm back?
Thanks,
Dan
If you have a handy backup, it's your life saver. Otherwise, hard reset will bring back the default Comm Manager. FYI, here is a 10 buttons that works on Tilt http://forum.xda-developers.com/showpost.php?p=1430168&postcount=3. you dl the last one "For 10 Button CommManager with 3G Only and GPRS Only switch", unzip then install "for the others.."
I did a hard reset and it DID NOT bring back the comm. I stupidly had not been backing up.
I installed a 10 button comm newer than the link you gave and meant for the exact device I have, not a general one. And it was programmed by the same guy. I do not think installing that one will do the trick.
I make this CAB with default parameters of my black CommManager...
Test it and post the results if you want. I have used in the past in my TyTN II to revert to default CommMamanager after testing other CABs out there, and works fine for me.
Good luck.
Ok you rock. It looks like it worked. It doesn't look like the original Tilt comm but it appears to have the same finction and it accomplished my objective. The problem I was having was with the WLAN. I was able to load up some of the other comm's but I could not turn the WLAN on and off. It would stick one way or the other. After loading that cab I was finally able to switch it.
It all started while I was on the car trying to take a call through the blue tooth. The blue tooth rang but the phone is what picked up. After that the comm went mostly black. Uninstalled the comm and the default comm did not come back and some of the functions of the other comm seemed to remain in the registry.
I am still looking for a comm that has internet sharing as a button instead of wireless modem. I downloaded one that had it in the picture but when installed it actually had Modem instead.
Thanks
Yes, I had downloaded & installed "10Buttons for Hermes" and my wifi function button died, then I loaded the "Kaiser.CommManager.10Button.3GOnly.Switch.For.Other." wifi function comes back as the orginal. Now everything works as it should, plus I can turn on/off 3G to save the batt. BTW, my tilt runs on Helmi cooked ROM Big storage (based on att&t)
Just found another thread to fix WLAN button; post #23: http://forum.xda-developers.com/showthread.php?t=332438&page=3
Good luck to you.
Loading that cab still disables my wifi. I guess I have to modify the reg directly. What is the best way to regedit? Is there a program already on the tilt?
Now when I load JCES's cab I lose the icons again. I am going to go ahead and do a restore. Something I should have done before I started all the cabs but I am an idiot. I did a restore after JCES cab fixed the problem.
This may be a simple one, but Im stumped...
My Tilt connects to my exchange 2007 server. On other phones running WM6, ActiveSync stays online 24/7. On my Tilt, it goes dormant after a while. I added an exclusive in task manager...
Basically when I grab it after its been idle for a few hours and look, ActiveSync says it was last synchronized at whatever time, I manually sync it, and it pulls down everything and stays online for a while, but eventually it goes dormant again...
Im sure that it's a simple fix, but I can't for the life of me, figure it out....
I have the same problem with mt Tilt. If I use the ATT ROM it works fine but if I move to one of the HTC ROMS I get that problem with Activesync disconnecting from the Exchange server.
I had the same issue on my 8500 with some of the cooked ROMs. On that device the ATT ROM and vp3G's ROMS worked fine (except for one of his; the hybrid I think).
For now I'm just sticking to the ATT ROM and pray vp3G gets a Tilt so he can start making ROMs for our device.
If you don't want all the ATT bloat installed then hard reset and then just hit the soft reset button when it pops up saying it going to customize the device in 3 seconds.
Kaiser connection issues
There are some issues going on with the way the Kaiser pulls emails after it goes to sleep.
Check the thread below or look through this forum for similar topics.
http://forum.xda-developers.com/showthread.php?t=332362&page=4
One of the problems that I've found on this issue is the ActiveSync notifications becoming corrupted. I'm not sure how to go about fixing this, but I downloaded a program called MemMaid that was able to rebuild the ActiveSync notification queue. After I rebuilt the notification queue for ActiveSync my Windows Vista Home Premium and XP Pro systems saw my Tilt and were able to sync again.
Hi,
I upgraded to several different versions of WM6.x (almost all above) but have the same problem. After UG I can't install any software through AS or browse the device with Explorer. Explorer shows no contents and the software screen opens but shows only a frame. I had the same problem with a Hermes and solved it by unchecking the extended network options in settings>connections>USB to PC but when I do that with the MDA II it freezes when I place it in the docking station. I then have to SR. I replaced the serialusbfn.dll with the one available on another post but AS will no longer recognize the device.
Any ideas? I've downgraded to WM2k3SE until I find something that works.
Btw, yes I did do a proper HR (n, yes,yes)
Cheers
First of all you need AS-4.5
If yes, check the settings in windows firewall.
If you are using some other firewall or virus guard, disable it temporarily.
Right click on AS icon in system tray & select Connection manager, enable USB.
Delete previous partnerships in AS.
Restart the PC & try to connect.
If it fails you can follow the diagnostic procedure which gives a error code, or possible cause. Check the error code with Microsoft web site.
You can also try to uninstall & reinstall AS
Hi,
I've tried all of that before (should have said so, b4). Here is a little more info:
I sync with 2 different computers, one at home (no network) and one at work (network). Both run WinXP Pro. I only have this problem with the work computer and only when WM6.x is intalled on a MDA II. The problem goes away when using WM2k3SE or when using a Hermes with WM6.x. Since the Hermes works without problem, I don't think it's the desktop.
Something causes the MDA to freeze when activesynce starts. Even the charging light stays on when I pull the unit out of the docking station. Backlight stays at full brightness and it doesn't go to sleep after a time. No buttons (even on/off) work. I can only SR.
Help!
Known problem
Read and try this:
http://forum.xda-developers.com/showthread.php?t=396081
Hi Muckelmaus,
thankx but I tried that. It causes the device to not be seen at all. I cradle it and nothing happens.
Cheers
I installed the Advanced Config application a while ago (V2), was looking through it today and decided to add the 3G option to the comm manager and remove the MS push thing, when I saved those my comm manager seems a bit screwed up now no matter what settings I use in the AC application. Can someone advise how to get it back to the defaults.
Thanks
Hard Reset. We do it every day over here!
Before you hard reset try this .cab.....running fine here....
http://forum.xda-developers.com/showthread.php?t=402012&highlight=comm+manager
Thanks, that worked.
What does the Beam setting do? On older PPC's it was the InfraRed, but it doesn't seem to do anything to BlueTooth...
mcvpjd3 said:
Thanks, that worked.
What does the Beam setting do? On older PPC's it was the InfraRed, but it doesn't seem to do anything to BlueTooth...
Click to expand...
Click to collapse
Says it right there in the link I posted.....
"Beam = Turn Beam ON/OFF
When On = your phone can receive files (Via BT) --> also more battery consuming when on.
When Off = Your Phone Can't."