Hey!
I seriously need some help here. Toolbar clock keeps changing. Suddenly it is on time and then the next time I turn it on it might have gone back 2 hours.
Example.
I turn it on and the clock shows 15.34.
I check my calendar and turn it off (standby)
I turn it on again the next time, say after 30 min. The clock SHOULD show 16.04, but it might say 07.17.
Anybody had the same problem?
I tried calling out, send a message, etc. but the clock does not change. Sometimes it goes back to normal, ie. it displays the correct time without me doing anything, but today it has not and the time is still wrong.
This is seriously annoying. I use my phone as my watch and I need it to display the correct time at ALL times.
Thanks
Hi, helangen.
I had a similar problem involving time. I kept finding that every so often my appointments kept changing by an hour. Everytime I went to the clock settings it showed plus one hour. So changed it back and then it would do it again and change to a time zone ahead.
Under "settings/personal/phones" there is a tab that says time zones. this controls whether or not the phone changes the time zones and clock automatically.
Personally, i erased my phone using clear storage under "settings/system" and started a fresh making sure I choose the right time zone and regional settings first off. Then entered all my reoccuring appointments and restored a copy of my PIM with the latest version of PIMBACKUP. At least this saved me entering all my contacts and kept my sms and mms.
I then unticked the automatic option I mentioned earlier and have had not one time related problem since.
Don't know if this will help but it can't hurt to share as you never know..
diigibio (diigimatrix)
diigibio said:
Hi, helangen.
I had a similar problem involving time. I kept finding that every so often my appointments kept changing by an hour. Everytime I went to the clock settings it showed plus one hour. So changed it back and then it would do it again and change to a time zone ahead.
Under "settings/personal/phones" there is a tab that says time zones. this controls whether or not the phone changes the time zones and clock automatically.
Personally, i erased my phone using clear storage under "settings/system" and started a fresh making sure I choose the right time zone and regional settings first off. Then entered all my reoccuring appointments and restored a copy of my PIM with the latest version of PIMBACKUP. At least this saved me entering all my contacts and kept my sms and mms.
I then unticked the automatic option I mentioned earlier and have had not one time related problem since.
Don't know if this will help but it can't hurt to share as you never know..
diigibio (diigimatrix)
Click to expand...
Click to collapse
Cheers. I'll give that a try. It's not that the clock just changes with an hour, but it is totally random how it changes. I might have to do a hard reset ;(
I can confirm that this solution worked. Thanks. Turned off the automatic timezone change and the clock have been correct for three days straight.
Please forgive me if this is being discussed elsewhere, but I skimmed through the Kaiser forum, and I didn't see anyone else mentioning this problem. My phone automatically reset the clock for DST yesterday, and looking through the calendar today all the appointments are an hour off. For example, my work schedule. On the day summary page it says I work 07:30 - 21:00 today, however when you click edit appointment it says 06:30 - 20:00. On Wednesday I have jury duty. On the day page it says that jury duty starts at 10:30, however it really starts at 9:30, and if I show up an hour late I am in contempt of court!
Is there a setting I am not aware of? When I click edit appointment it shows the correct time, but on the day page its an hour late. The thing that really bothers me is that since I have an erratic schedule at work I have it set to remind me an hour before, just in case I forget to set my alarm clock the night before. Today I got my 1 hour reminder while actually driving to work!
I am using the new Tilt ROM, details are in my signature.
Thanks, Jay
Update: I've been on the phone with AT&T tech support for 30 minutes now, and it still doesn't work right ...
-Jay
If you are saying the Today Screen Calendar is off by an hour, but the calendar inside the pda is ok; A soft reset should fix your issue.
We had a couple of Hermes and kaiser's with this issue yesterday.
Try the attached cab
Ok, I 've been transferred to HTC support from ATT, which is nice, I didn't have to call them myself, and the ATT rep explained my problem to them. There is a hotfix of this issue, I haven't tried it yet, but I figured I'd share. http://support.microsoft.com/kb/949168
-Jay
eagle 1 said:
If you are saying the Today Screen Calendar is off by an hour, but the calendar inside the pda is ok; A soft reset should fix your issue.
We had a couple of Hermes and kaiser's with this issue yesterday.
Click to expand...
Click to collapse
I've soft reset and took the battery out. I'm going to try the DST cab.
-Jay
WOW! Mine is too!
Didn't even notice.
All my calendar events were changed from 8am start to 9am start.
What the heck?!
Yeah, it's stupid daylight savings time. You have to download a patch from microsoft to fix it, can do it straight to the phone by going to www.microsoft.com/windowsmobile and hit the Update option. I don't really understand why it couldn't just be automatically sent thru the Windows Update option under Settings...talk about a frustrating issue though!
now the question is will it work with 6.1
I saw this coming days ahead because of my scheduling :S...
Anyways, what fixed for me was just fixing the time on my Kaiser, all but one (?) appointments switched back to the original time automatically. No extra cabs or tweaks.
Good luck with that.
I've tried running that patch, and after installing the cab, it resets the Tilt, and then when it comes back everything is still the same. I've tried switching to a different timezone, and then back (per the advice in the another thread) to no avail.
Jimmyv - what do you mean you "fixed" the time?
Jay, please keep us updated as to what you're finding out.
Jimmyy said:
I saw this coming days ahead because of my scheduling :S...
Anyways, what fixed for me was just fixing the time on my Kaiser, all but one (?) appointments switched back to the original time automatically. No extra cabs or tweaks.
Good luck with that.
Click to expand...
Click to collapse
I tried resetting the clock, but the appointments were not effected. I just got back from lunch, I'm going to try the cab now.
-Jay
Keep in mind this is not, nor should it be considered, a permanent fix. I don't know what long-term problems this could cause, but I'll tell you how I got it to work for me.
1. (Not sure if this is needed, because it didn't seem to change anything) Install the 2008 DST update from Microsoft.
2. Make sure all your appointments are still set to their original times (As in, you didn't change the original hour so that it'd remind you with it's skewed view of reality )
2a. (You may not have to do this) Under the Phone options dialog (Settings -> Personal -> Phone), go to the 'Time Zones' tab, and uncheck 'Automatic change time zone and clock'.
3. Go to the clock settings dialog (Settings -> System -> Clock & Alarms) Set the time zone to the one an hour behind you (-6 to -7 is what I did)
4. Set the time, manually, an hour ahead. (In the system clock dialog, there are two options for time: Time zone, and time. Set the time zone an hour behind, then set the actual time an hour ahead.)
5. Enjoy. Your appointments should now be okay.
I do hope someone figures out what's really causing this, though, because I'm not keen on changing the time zone every time DST comes into effect.
--------
AT&T Tilt, running Custel 2.1 AT&T Chopped and Screwed with Custel Touch Fix.
Mine works fine.
Your time is pulled off the network. I don't see how this could cause a problem.
YEa... had this problem myself. Figured it was a good time to hard reset and reinstall since I had a crapload of stuff I didn't use anymore.
vena_wolf said:
Keep in mind this is not, nor should it be considered, a permanent fix. I don't know what long-term problems this could cause, but I'll tell you how I got it to work for me.
1. (Not sure if this is needed, because it didn't seem to change anything) Install the 2008 DST update from Microsoft.
2. Make sure all your appointments are still set to their original times (As in, you didn't change the original hour so that it'd remind you with it's skewed view of reality )
2a. (You may not have to do this) Under the Phone options dialog (Settings -> Personal -> Phone), go to the 'Time Zones' tab, and uncheck 'Automatic change time zone and clock'.
3. Go to the clock settings dialog (Settings -> System -> Clock & Alarms) Set the time zone to the one an hour behind you (-6 to -7 is what I did)
4. Set the time, manually, an hour ahead. (In the system clock dialog, there are two options for time: Time zone, and time. Set the time zone an hour behind, then set the actual time an hour ahead.)
5. Enjoy. Your appointments should now be okay.
I do hope someone figures out what's really causing this, though, because I'm not keen on changing the time zone every time DST comes into effect.
--------
AT&T Tilt, running Custel 2.1 AT&T Chopped and Screwed with Custel Touch Fix.
Click to expand...
Click to collapse
That worked, but for appointments I entered today now are an hour early! I can't win.
-Jay
Rescue9 said:
YEa... had this problem myself. Figured it was a good time to hard reset and reinstall since I had a crapload of stuff I didn't use anymore.
Click to expand...
Click to collapse
A hard reset wouldn't be bad, but I really don't want to re-enter all of my appointments. Otherwise I could fix it by just deleting all the appointments and re-entering them.
-Jay
Twenty4 said:
Mine works fine.
Your time is pulled off the network. I don't see how this could cause a problem.
Click to expand...
Click to collapse
I think the problem is that 2 things are trying to do the same thing. The network is trying to adjust for DST and windows is trying to do it too. I wish there was a way to just turn off DST and let the phone manage the time.
-Jay
Jay2TheRescue said:
I think the problem is that 2 things are trying to do the same thing. The network is trying to adjust for DST and windows is trying to do it too. I wish there was a way to just turn off DST and let the phone manage the time.
-Jay
Click to expand...
Click to collapse
I just had a brainstorm! I'm in the eastern time zone. (GMT -5) Indiana does not participate in DST. I switched my time zone to GMT-5 Indiana, and all my appointments are correct now. I'm leaving autoupdate time on the phone, so this should take care of itself, and the phone will manage the time changes.
-Jay
I just realized you do have to turn autoupdate time off to use my earlier method. Futhermore, due to the same problem, I'm not sure you're new method will work forever. The reason I had to turn autoupdate time off was because the network told my phone it was -not- in the -7 time zone. I think, after a little bit of time, it will tell you're phone it's not in Indiana and you'll be stuck with the same problem all over again. x.x I'm going to look at the registry for the clock/calendar integration and see if I can't find some hidden setting that'll stop the clock from messing with the appointments. I'm pretty new to this though, so don't bet on my finding something that'll work. Any help from someone smarter would be very much appreciated. ;D
Edit: Sadly, the only thing I could find that looks anywhere close to something in relation to this is the value TimeZoneInformation in HKLM\Time. I can't figure out how I'm supposed to edit that so that changing the time zone doesn't touch the appointments, though. I'm not even convinced it's possible. Anyone else know any registry values that might relate to this problem? I'm going to try and decompile the MS patch next to see if I can find any hints with what they did.. Even if it didn't work.
I have had the HTC touch diamond for a few months. For the most part I have liked it but now I am having problems. I get freezes like alot of people have reported but it's nothing consistent just a annoyance that you have to remove the battery just to make everything work again.
Recently I couldn't use the phone, network was having problems so I thought. Called Sprint and they said the tower in my area(only 1) wasn't at 100% so they said that could be my problem. Couldn't send or recieve calls or text. They changed my msid and also said I could try updating my rom. I had 1.09, now I have 2.00.
My main problems has to do with texting and settings for texts not being saved. When I have a open conversation and a text comes in, it keeps saying that I have a text to read but I don't(I have already received the txt during the conversation). Only way to stop that is to click on the persons name/number or leave the conversation an use the up and down arrows to find the latest text then it stops saying I have a text. Before the 2.00 update, all I had to do was txt the person abck and the message would go away(meaning I had read the txt) or just leave the conversation.
I cannot get any settings to stay saved. I keep getting like auto correct,suggestion for words and capitalization for first letter. I have them turned off but they keep happening. It's extremely annoying and don't want or need any suggestions. Half the time it's not even giving me the right word and sometimes I have to type the word, delete it then retype the word for it to just be accepted. I am also getting slight pauses/freezes when I text. Most of these problems I believe are caused by the 2.00 rom update. I did not notice most of these except for the settings not being saved. I believe that has always been a problem.
I have tried a hard reset but that didn't fix anything. I thought it would give me back the 1.09 rom but it didn't. No matter what I do, I still have 2.00. So If I am stuck with it, I would liek to know if anyone can help with these problems.
The time isn't always right. Sometimes it says I sent my text an hour before or an hour later and i get texts the same way. It's just random, nothing consistent.
90 views but no replies. Can anyone help?
Sorry to hear that no one is helping you. I been looking around and can't find a viable solution for you.
Apparently with HTC's website, it's better not to downgrade your ROM. So if you want to keep your guarantees or waranty with the phone, take it back to Sprint and they should be able to help. Or contact HTC directly.
I think that will be the best thing to do as no one here suffers the same problem as you. Hence for the no feedback.
Good luck!
Am I only one with flex with this problem?
Contacted sprint, told me to update prl and profile, then hands free activate. Still with problem. After while when set to get time by carrier, it goes back to an hour off.
I can fix this by manually setting the clock, but then in programs it shows timestamps of an hour off, guess getting the wrong time from sprint
SayWhat10 said:
Am I only one with flex with this problem?
Contacted sprint, told me to update prl and profile, then hands free activate. Still with problem. After while when set to get time by carrier, it goes back to an hour off.
I can fix this by manually setting the clock, but then in programs it shows timestamps of an hour off, guess getting the wrong time from sprint
Click to expand...
Click to collapse
Dont feel bad, my GPS sometimes says im over 100 miles from where im actually located. checked the forums and Sprint and it seems this is an isolated issue.
I'm having a bizzare issue that started on Christmas Eve.
I'm not getting my text messages. Well, I get them, but very, very late if at all. I sent well wishes to people that night and received a barrage of responses about 8-12 hours later.
Even when I text myself nothing happens. I've tried reflashing, playing with every setting I could and nothing.
The only way I can force them to me in is by dialing voicemail and texting myself while the call is active. THEN it works. I get my text immediately and whatever's been waiting in queue.
If anyone's got any ideas, I'm all ears. T-Mobile GS6 running xtrestolite on DOI1 baseband.
Problem resolved. After trying everything I could think of I called T-Mo. They reset my APN on their side and voila!
So if anyone ever has this same issue, call you provider and have them troubleshoot on their side too. Especially if you know that no one else is having the same issue.