Folks,
Recently I upgraded my phone from 8525 to Tilt. Overall a great device but there are few quirks but I guess you cant have everything. I have few questions which I tried to find answers for but couldnt.
1) Is there a way to manually turn GPS on or off? My GPS was working fine but after I installed Map4PDA i think it changed some GPS COM port settings etc. and now none of the Satellite programs such as MS Live Search or Google Maps work. Everytime i start any one of them they cant communicate with intermediate driver and the application hangs. When i kill the app, the GPS hardware i think remains on (the orange LED keeps blinking) and the device becomes ridiculously slow. Remedy is to soft reset the device but its a PITA. Besides, now I cannot use any of the navigation software. If I hard reset the phone i guess it will restore everything back to normal but i'll lose all my customization which i really dont want to. I guess there are backup programs out there but not sure how good they are w.r.t. restoring system state and even if do restore system state, i may have same problem with GPS. So whats the good way to control GPS functionality, change settings etc.
2) Is there any way to leave LCD on while you are on the phone, backlight can be turned off. Currently its a pain to bring up LCD when you are on the phone, you have to use some hardware button to turn it on, not really ideal. I dont want to turn off power save completely for obvious reasons. When i was using MS Live Search and using GPS, it kept the display on all the time even though i was on battery which I think was a bright idea.
3) I use Slide2Unlock and with 8525 i could use the hardware navigation button (the rocker switch) to unlock the phone but with Tilt it doesnt work, any way to get that working (I should probably post this question in S2U thread).
IMO # 2,3 at least should be registry-tweakable, just need to know which one. GPS question might be hard to crack but I hope some of the experts here would be able to provide an answer.
Thanks in advance, there is a great site!!!
Sam
I will answer #1 - Map4PDA will kill your GPS. I posted about this last week with no replies. Unfortunately, my only option was to hard reset my Tilt. I searched til my fingers were down to the bone and found nothing that revive my GPS. I could see that it was turning on, but it wouldn't turn off again after using Google Maps (or any other program, for that matter).
In the end, hard reset was my only solution. Too bad, cuz it's a sweet program that will let you use Google, Yahoo or MSN maps, plus I like the neat speedo.
.:Christian:.
Too bad I didnt come accross your post before I installed that stupid app, darn! Thanks for the insight but that means there is no light at the end of the tunnel.
Related
Hi folks,
Another quick one... You've probably seen I want to try to disable the phone driver on my BA...
...Can anyone suggest a method I might be able to kill some of the lighting on the BA? Ideally I'd like to turn off the status-LED in the top right corner, and the green and red call buttons too (or any combination if they're not _all_ possible)?
Any ideas?
Thanks,
Rob.
On the new WM5 ROM's there is an option to leave bluetooth on but turn off the phone "Start -> Settings -> System -> Power -> Wireless"
It's abit of a pain to get to if you want to keep turning the phone on and off all the time, but the option is there till a better solution comes along.
Very handy for long drives using TomTom without anyone calling you. :wink:
As for the lights, I'm not sure the flashy lights really use that much battery? Or do you have some other reason?
Hey Percz,
Thanks for your reply...
Interesting info about the WM5 ROM...
To be honest I've been out of the XDA thing for a while; but I've just decided I want to sort my setup out properly now; as part of that I did start to look at the Wiki for WM5 stuff the other night; but it looks like there's going to be hours to catch up on (I couldn't even decide which ROM was going to be best for me to try), and I don't want to risk having a flaky OS and being unable to revert... I'd love for somone to be able to honestly correct me and tell me that it's quite straightforward to select and upgrade to a *solid* WM5 ROM?
Basically I'm going to be using the PDA for Sat Nav 95% of the time now; maybe the occasional other task but rarely. That's why I want to disable the phone - it's not got a SIM card in it, so having to keep hitting cancel when the phone-dialogue pops-up and then switch to flight-mode is getting to be a pain (I use speaker-mounts so would prefer to eliminate any chance of GSM traffic radio interference on the speaker if it's going to be quite simple to do); and killing the lights would be nice too because they're not really required anymore and a bit of a distraction in a dark-car.
Thanks again and regards,
Rob.
Hmmmm...
Foolishly enough, I somehow hadn't noticed that the thing stays in flight-mode after a soft-reset once its set? I guess the short-of-average day fiddlin with pootas at work has got me looking for problems that aren't really there.
Having to set it once after each hard-reset is something I think I can live with *sigh* heheh
Still, I'd very much like to kill at least some of the lights... Mainly the green and red call buttons, I'd like to lose the status LED too really; so there's no needless glare of lights in the car at night; but I guess it's sort-of useful as an 'at-a-glance' charging-status indicator...
Thanks again,
Rob.
You know you could do what I do with my GPS unit.... Masking tape! :lol:
Seriously, it works and doesn't require any hacking.
If it was me, I would leave a SIM in the phone and just disable the Phone in the option i mentioned, saves alot of hassel that way. Plus you have a spare SIM 'just in case', or add TomTom Travel later on.
Just a question though, why not buy a dedicated TomTom unit? They do a neat little unit that's about pocket size now, they advertise it for motorbikes but it's really quite neat for walking around high streets with it in your hand.
Percz said:
You know you could do what I do with my GPS unit.... Masking tape! :lol:
Seriously, it works and doesn't require any hacking.
Click to expand...
Click to collapse
True...
Percz said:
If it was me, I would leave a SIM in the phone and just disable the Phone in the option i mentioned, saves alot of hassel that way. Plus you have a spare SIM 'just in case', or add TomTom Travel later on.
Just a question though, why not buy a dedicated TomTom unit? They do a neat little unit that's about pocket size now, they advertise it for motorbikes but it's really quite neat for walking around high streets with it in your hand.
Click to expand...
Click to collapse
Having a SIM in there would be useful for the TomTom extras of course... Something to keep in mind certainly. For the time being I'll just use Flight Mode to keep the thing from nagging me - Going back to your mention of WM5 (and slightly OT); how've you found the ROM you're running in terms of general stability and feature(/bugs) - particularly with TomTom, but in general too - any headaches? - would you recommend the upgrade to someone who wants to use the device as I do?
In terms of having a dedicated navigation device; I do quite like some of the units available, but the next time I'm investing a chunk in my sat nav setup will be to either install my long overdue CarPC or maybe even swap-out the Centre Console in my car for a double-DIN version so I can install Audi OEM nav (CarPC being a bit wobbly)... I just want to get the PDA to a 'tidy' solution until that point (I guess towards the end of summer).
Thanks again,
Rob.
Can anyone tell me what's going on with my XDA2i pls. It's been very stable for the past 6 months which is the last time I Sprite backuped. But last week the camera disappeared and Windows media player appeared on the camera button. So I thought I would re-install the ROM then restore from the June Sprite backup - remember I have been using the camera which must have been on that backup.
After the ROM install, the camera is there and working, but if I try to then do a restore from the Sprite backup, the camera is removed.
Thanks
Mike
search it at here, im sure you'll find any camera software to install....
if you need something great camera application, try CoolCamera at www.ateksoft.com
you can do it! Mike!
thanks
Thanks Clustered .... I will definitely try that camera app, - does it improve the quality of the images (I find them much worse than the supposedly poorer camera in my old XDA 2)
I have since discovered that the camera app is not being removed (there are still 4 camera related files in the Windows directory), but all reference to these are being removed somehow, so that the camera program is not visible in the 'Programs' section, nor is it associated with the camera button on soft boot.
I have temporarily got round the problem by placing the camera.exe icon in the SPB Today function, so at least I can get it started with the stylus
Any clues .... should I be looking at some registry entries.
By the way .... ironically I would like to reprogram the default for the camera button to scroll-down which I use in microsoft reader. Do you know how I could do this (tried Vito button mapper yonks ago but it seemed to cause quite a few problems)
Thanks
Mike
I had this, do you find the battery is discharging at a quicker rate??
The history with mine was it lost the cam function swapping to WMP on the button. Only way to cure it was to hard reset.... of course it would go and do the cam fail just when i had got everything set up and running nice for a few months. I found as it went further down the line that using the back up i had would instigate the cam error quicker than if i didnt.
It started to do it more and more. So i sent it back, they said all fixed. of course it wasnt 'cos the internal battery had discharged thus doing a hard reset clearing the error
Finaly on the 3rd return they did a board swap... which meant i had to get tomtom to re do the activation codes for me.
Load of hastle but it hasnt been a problem in 3 months now.
Aaargh ! yes that's exactly what's happening - battery running down quickly, so I just ordered a coupla new ones (fortunately didn't pay the O2 price of £39 and have ordered from Hong Kong at about a fiver).
Sounds like it isn't worth me returning it to O2, as a board swap would cost a lot - it's 13 months old now
Interestingly though ..... a hard reset puts it right, but as soon as I restore data and programs from a Sprite backup, the problem is back. And yet the Sprite backup was done back in June when I definitely wasn't having this problem. And an earlier backup does not cause it. Does it seem possible that one of the applications we are using has a time -related problem? Only thing I can think of recently was the British summer time auto correction.
Thanks
Mike
dont worry bout it being 13months old they got 2 yr warranty!!!! get it down to them now. you will get it sent off, if they dont replace the board, call the number for the repair company as soon as you get it back, tell them its doing the same (as you can tell from my post before the prob clears n they just turn it round) they send you a package and you send it off as a bouncer, give then a fault report, they will swap the board.
make a note of all yer device info, imea, mac address etc. to confirm the board has been replaced.
i put a pen mark on the warranty void sticker under the battery covering the screw to see if they went inside.... they didnt the first times it went back.
if you have tomtom you will need to scan n send them a copy of the board change document to get your codes reset, also send them the device code tomtom gives you when you try to run it. they require that. it took them about 5 days to sort out at tomtom
You know what gets me about this place is i could have just said send it back but i prefer to give folks as much explination... like i would in return.... unlike i have had on posts ive made where folks have said post it in the right section etc.... not telling me where or assuming you understand all about reg editors or rom changes..... following link from page to page is so frustrating... sorry rant over now
hope you get it sorted soon.,... wish i could get my Q's answered.
Thanks mate .... I'll do all that. Fortunately I can afford the time, as I've got a couple of working XDAII that two of our guys ditched in favour of execs, so I'll just set one of those up until they sort the XDAIIi
Thanks
Again
Mike
Me too
Hi Guys
You have described exactly what happened to me. I use a Motorola BT head set (820 I think) and the tom tom navigator 3 with BT satelite reciever.
I gave up in the end. It seemed to be due to the BT stack or somthing to do with the Tom Tom BT drivers. I have 2 xdaIIi's and I now use one as a gps only (does not even have a sim card) and the other one as a phone (with the Motorola head set) I dont have any problems.
If I try to use two BT items together..... with in about one week the moment i loose the camera and the battery lasts about 6 hours from full.
If I remember correctly the head set would stop working or lock up the phone, you then have to do a soft reset then the camera goes etc etc.
I can tell you I am absolutley fed up with BT I am yet to come across a BT anything that works first time every time. Even if it does work today, tomorrow who knows if it will work. The reason i am looking athe postings is because my new £400 Garmin Nuvi 660 wont connect to the XDA!!**!^%$!£"
Any way best ot luck, you are going to need it.
Hmmmmm .... don't think it's bluetooth, as I don't ever have it switched on - I prefer to use the bog standard handsfree speaker kit and don't use GPS/TomTom.
Plenty of things lock up the phone though :-(
I've gone back to my XDA II and ya know what .... I prefer it. The quality of colour saturation on the screen is much better - OK it's not quite as bright as the XDA IIi but the latter is not really any good itrself on a bright day.
.... and the camera in the II is just a gem - OK only 640k but the way it renders the image is just like silk compared to the naff camera in the IIi
... and I'm not really gonna miss the wifi, and I never really bothered using IE in landscape.
So I think I'll stick with the old II and see what you guys think of the Orbit (?) when it comes along
Mike
Well.... great service (eventually) from O2. They sent me a replacement without even waiting for the faulty XDA2i. Bad news is they sent an XDA2s ....but they then sent an XDA2i the next day. It's not brand new but presumably it's been 'reconditioned'.
Charged it up, did a hard reset - camera was there OK. Did a Sprite restore from a known good time (last June). But camera had disappeared again
I guess it's remotely possible that they have sent me the one that Richard (?)returned but I think he said they'd definitely done a board swap on his.
Despite the good advice on here, I'm still inclined to thhink this may be a software conflict problem rather than a hardware issue. And somehow it seems to be connected with time. I had not installed anything new when I suddenly lost the camera about 3 weeks ago. I'm restoring from a Sprite backup that definitely was not displaying any problems when I made it.
Regards
Mike
my cam issue would come back if i used a restore from a good point too. But that was on the old board. Ive just done a full clean install of everything and its seems to be ok. I did wonder is some gimp out there had writen some kind of virus that i had got somehow.
It might be the startup programs/services...
Try checking the Camera_Detect.lnk if it's functioning normally...
Although I'm really not sure if it is the cause but I have a similar problem but not with the camera...
Rather, it's the rotatescreen icon...
I hard reset and the icon is there but when I have installed programs it disappears once I soft reset... not sure which of the programs installed overrides the icon startup...
But I think it's during the startup that somehow make these services (camera, screen rotate, etc.) fail to run because some of the programs might be clashing with them on startups/bootups/soft reset...
I think you might be correct, as the replacemnt XDA2i that O2 sent displayed exactly the same problem when I put all my stuff back on it, but after another hard reset I put just a limited range of utilities back on, and so far in a week or so, it has been faultless
Mike
Is there a posibility to let the GPS on, even TYTN II goes in Standby?
I only want to track my route and don't want to loose much power with the display.
You need to use a screen toggle command such as those found with SPB Pockets Plus & other X-Button type programs.
Yeah, there is a program called trackme, which if you check this forum a lot I'm sure to have seen, that has a button to turn the screen off, although thats not really putting it in standby since all the buttons can still be pressed, so if you want to keep your phone in your pocket that won't work so well. I have also been trying to find a good solution to this problem with not much luck so far. For now I just use my car charger
BTW if you do a lot of driving/traveling around you should check out the program in my signature, its a pretty cool map program that pays for collecting GPS data. It really pays too, I made $40 in less than a week with just normal driving.
Sorry I couldn't be more help with the standby issue, if you find a good solution to this let me know.
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.
Hi,
I'm using my Xperia as mobile navigtion while I'm riding my motorbike. Two days ago I was driving on the highway...when suddenly my music stopped and my device startet a Phonecall (to the last person I called) - this happened THREE TIMES in half a hour! (kinda expensive...)
While I'm using TomTom (or any other GPS software) I cannot turn the keylock in, because then the software won't get any GPS-signal.
Now I wanted to know if anybody knows a registry-string I have to change that GPS would work while I'm using for example TomTom and listening to music and turn the keylock on.
I updated my Rom to R3AA007 few days ago...but with older ROMs it's the same...
As far as i know, most of nav-progs have a lock-while-drive-mode, maybe the tomtom too.
that'S not enough. when you break at a traffic-light, the lock may be removed because it's only active over a defined speed. but when I'm using it with my motorbike, it's in my pocket...and everytime the touch-display could be touched....even if I stop at a traffic light
Looks like we have the same problem. I'm also interested to know how to work around this.
if you don't like to se quickGPS, you could turn your phone off and on again (without entering the pin number....if you leave it off, tomtom tells you, that you are using flight-mode ) but I'd like to use quickGPS...
does nobody have an idea?
perhaps some keywords to search in the regitstry...??
up...perhaps somebody now has got any idea...
keylock is not the problem.
i bet 5$ that u have used the included headset right?
the bulky part where you connect ur earphones is the problem. the tiny switch used for accepting calls is either totaly borked or the connector itself is. i have exact the same problem. i called a mate like 20 times.
i use my phone to listen to music while i drive my motorcycle any my keypad is locked all the time. it doesnt realy matter why prog u are running.
when u press the little button short or long (cant remember) it starts calling the last person on your dial list. somehow this button seem to be pretty sesitive to movements. this also works when the keypad is locked.
so either we buy a new headset or we find teh registry entry which defines the use of this worthless button