Database Develop

Broadcom Bluetooth 1.6.0600 cab available here!

The new version of Bluetooth 1.6.0600 is now available at
ftp://xda:[email protected]/BlueAngel/OEM_WWE_160_600.sa.CAB
I have installed it but I haven't tried it yet. I had no problem installing the cab manually or directly from the Extended ROM.
Does any one knows which are the corrected bugs in this version and what's new? Why this new version number (from 1.0.3500 up to 1.6.0600)? It looks like a major release to me. I hope it DOES solves the problems we have with Bluetooth and our Blue Angels.
Enjoy it!
ArtZ

thanks for this really a nice update

I can't install it! :x
It says that a dll is in rom and connot be overwrited ...
(how do you install using extended rom??)
Thanks

I guess Bluetooth has to be be turned "OFF" when you install the update.
I had no problem to install it. I will play with this update tonight at home
ArtZ

I tried with it off, even put it in the startup dir but it says the same error ...

Yeah!
Occur the same thing with me!
Can anyone say the reason for this?
It will be because of the ROM installed on int?
My device configuration is:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtRom: 1.22.126 WWE
Thanks.

If it can help, here's my device info:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtRom: 1.22.557 WWE
Thanks!

Hi,
i have the same problem.
the dll is in use or in rom
Thanks.

I have installed the cab in two ways as follows:
First way: I copied in my SD Card the OEM_WWE.160.600.ca.CAB and I launched from there with the Bluetooth turned "OFF" and all other communication ports closes ( No active USB for ActiveSync and/or Wi-Fi) and I had no problem to install it.
Second way: I have unlocked the Extended ROM and put the CAB there deleting the previous BT patches from the Belgium Extended ROM ver.557 (OEM_124_008.ca.CAB, OEM_Patche_12100401.sa.CAB, then, I deleted the two lines to install these patches in the Config.txt file to replace them the new CAB) and I had also no problems to install.
Hope that helps.
Regards,
ArtZ

Hmm..
Well. I got the same problem..
The file "\Windows\ace_ddi.dll" is in use or is in ROM.
What to do?

I had more of a problem even out of the cradle so I:
Renamed the files in the \windows
(My Resco Explorer complained that it was unable to delete but it renamed them any way
ace_ddi.dll
ahioem.dll
AudioGW.dll
BtCeIf.dll
BtCeProfiles.dll
BtCeStack.dll
BTChooserLib.dll
BtPhoneIf.dll
btrez.dll
BTTrayCE.exe
FrontLight.dll
Keybddr.dll
Serial_BTUR.dll
Serial_Cmd.dll
Wavedev.dll
wbtapiCE.dll
Then I installed the Cab from \Storage\temp
Bluetooth Reports 1.6.0 Build 0600
I have not tested if it works

Has anyone tried this on an XDA II with 2003SE?
I'm tempted to install it if it works.

It Worked!! Had to renew a few more file but it is running now.
Thanks MDAIIIUser!

I have a Verizon XV6600 and tried this. For whatever reason it instantly makes the phone stop working. Also the Bluetooth starts but also instantly turns off with the following message: "The Bluetooth Radio failed to turn ON due to insufficent driver memory available. You must perform a normal reset before you can trun ON the Bluetooth Radio."

Before I install (and risk another Hard Reset and new System Setup) the key questions:
1) Does ist improve BT-headset voice quality or stability?
2) Does it include or work with the High Quality Audio Profile for the HP BT-Headphones?
3) What are the recognizable improvements over the 1.0.0.3500 stack?
Any answers available?[/list]

Before checking the forum again i made the same procedure described by MDAIII user .
I have tested with my HB60 headset and its working fine so far..

RE
Its NOT working on O2 XDA II with WM2003SE.
The whole thing hangs
:evil:

How do I make the dlls visible in order to rename them?
I would like to install this on an XDA II but I cannot see the dll files in the Windows directory.
How do I make them visible in file explorer so that I can rename them?

RE
Just go to File Explorer --> Windows and tap the screen and hold it there. A box will pop up and you'll be able to see 'View All Files'

Broadcom Bluetooth 1.6.0600 cab available here
Hi all
I did this update 3 times, the install went ok, but me BT signal
is not very good, it swings up and down..
Did this only happen for me ??

Official i-mate ROM release (1.40.176 & 1.12.00)

It's too good to believe:
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
I'm downloading now.
Tom

39.6MB (their server is really slow today)
From i-mate site:
The details of the new ROM image are:
For the Worldwide English Build:
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.12.00
Protocol version 1337.42
ExtROM version: 1.40.176 WWE
I think they waited until the pros on this site figured everything out first...then they just piggy-backed on their findings. Kudos to the real pros on XDA-devel!!!
tom

How to install this rom in Spanish Qtek 9090, i'm new and y don't now very well to change the language.
Thank you!

imate update
I just got the update from the I-mate site and am working it with the XDA tools but I'm getting a checksum errors on the radio, NK, and MS filles. Should I be using a different tool? My device is a MDA III T-mobile german flashed to english. Any Ideas???

Downloaded, installed and running. No problems....yet. I can't find a config file in the extrom in order to make some changes, but there's a setup.exe file now. Not sure what that's about.
No idea how to change the language...I'm not good enough to know that.
More later.
Tom

So far so good. A couple issues. 1) the phone off (or flight mode on) is no longer activated by the Call End button. Shame...I loved that feature. 2) I have a problem turning the phone on (flight mode off) after a soft reset. I think it may be caused by the Contacts Button addin. The only way I can turn on the phone is to go into the keypad and then turn it on. All other methods cause the system to lockup.
Tom

Temporary copy...
Until someone puts it up on xda-developers / cooks it,
a MUCH faster loading copy is at
http://www.myehud.com/BlueAngel/PDA2k_WWE_14000_176_11200.exe
Ehud

Great!!!!!
I'm downloading it right now!!
i-mate finally released it after 1000's of unkept promises!

FINALLY!!! Here's to hoping it will be better than the Qtek version!

Again, I would like to ask why there is no config file??? I take it setup.exe has the config file built in? If any of the pros can give me some feedback as to this, I would appreciate it. I'd like to drop in several cab files incase I fubar something down the road.
Thanks,
Tom
P.S. almost 6 hours and only the "turning on the phone" problem.

yes... config is missing...
will try out some combinations .
skype is taking 3.8 megs... i don't need it there.

sunish said:
skype is taking 3.8 megs... i don't need it there.
Click to expand...
Click to collapse
Ture...true. Skype was fun the first couple times, but with VOIP at home, I really don't need it anymore. Still, kind of cool to show people...if you have someone that you can connect to.
Tom

Tried some combos, including, using the old config and setup files... nothing wrorks,
only thing is that any additional file found in ext rom is treated as a carrier customization file, and on selecting one file , that particular file will be installed..
also, i noticed that there is one config file in the windows directory.

Just take the Autorun.exe and config.txt from another rom, add in the cabs from the i-mate rom, and there you go.
Yeah, I will be removing Skype ASAP myself. I can understand how it could be useful, but for my purposes, it just takes up space.

The Setup.exe is way better then the config
Leave the setup the exe it is better then the config. with the config you have to site the and write a line for each cab file. the setup.exe automatically runs every cab file in the ext rom. whether you put it there or not. So when cookinh your extended rom no need to keep having to change the config.txt. The setup will run whatevers there.

You can find this new ROM at ftp upload folder hope MDAIIIUser can move to wiki , I will upload ext.ROM by tomorrow

TheLastOne said:
Just take the Autorun.exe and config.txt from another rom, add in the cabs from the i-mate rom, and there you go.
Click to expand...
Click to collapse
Tried that , removed setup.exe , copy old autorun.exe and made new config file,
but didn't worked out..

Re: The Setup.exe is way better then the config
MarcValme said:
Leave the setup the exe it is better then the config. with the config you have to site the and write a line for each cab file. the setup.exe automatically runs every cab file in the ext rom. whether you put it there or not. So when cookinh your extended rom no need to keep having to change the config.txt. The setup will run whatevers there.
Click to expand...
Click to collapse
Do I need to keep autorun.exe ? If yes, then which one old or new?

sunish, I can not imagine why it would not work. You must have made a mistake somewhere.
The WMP10 close problem still exists, which leads me to conclude that it is indeed a problem with the 1.40 CE Rom, and not something within the Extended rom muddling it up.
Has anyone seem any actual improvements with this rom over Qtek's? All of the same problems still to be in place. The extended rom has a few different (but unimportant) cabs, but that's about it.
MarcValme, I'm not so sure I agree. One of the good things about the config.txt file is that you can specify the order in which the cabs install, which does actually make a difference in a few circumstances. Food for thought.

TheLastOne,
Don't know / Can't figure out where is the problem.
No combination is working for me.
Maybe will try it again after a day or so.
Right now, after unhiding the Ext ROM, I'm installing all the programs needed by me manually.
One thing that I noticed is the increase in speed... The performance is somewhat better now...

Help LOST CRITICAL FILES>>>>

OK, I have a Verizon Wireless XV6600.... I accedentaly deleated some files in the windows folder, and now my "Album" will not open, and I cant play any videos.... I am not sure how to back up all my data, settings and programs. I would like to do so before upgrading firmware or re installing the Windows Mobile.
Where should I start, Without loosing everything?
HELP???
ROM version: 1.35.00 WWE
ROM Date: 12/10/04
Radio Version: HA01_140
Protocal version: AA3.3.301
ExtROM version: 1.35.113 WWE
ALSO, I use a MAC with Missing Sync. :?:

In your case I recommend upgrading to the latest ROM.
most of the programs can be later re-installed using Activesync.
If you keep all item in PC's Outlook, you'll be able to sychronize them with 'fresh' device.
It's hard/impossible to preserve ALL programs and settings.
Hard resseting / flashing the device always require some configuration work after...
Good luck.

OK, It seems to be the "Album" program is missing:
I did some cleaning and, when I try to run ALBUM, I am now getting the error:
Album.exe- (Cannot find 'Album' (or one of its components). Make sure the path and filename are correct and all the required libraries are available.)
How do I download this program and where?
I need the slideshow with Vids and PICs.... I love this little usfull program!
HELP
I am using the Verizon XV 6600 with camera....

upgrade
just upgrade your device to new ROM

tilt with htc home plug in customizer not working?

I tried installing the customizer program, it installed fine but when i went to go run it, says that the htc home plug in not installed, when it prompts me to install it I say ok then it errors out.

have you tried installing htc home seperately?

Have you installed SDK Certs .cab?

goodness, where to begin.
1) This is not a ROM DEVELOPMENT issue, and as such should be posted in the Kaiser General forum, or at the very least in the software forum.
2) You haven't told us what rom, or what version of home is installed on your phone.
3) For that matter you didn't even tell us which version of htc home customizer you're using.
4) Wherever you got the program from would have been a much better place to post this question, we don't need a lot of additional redundant threads in here.
Anyway, you get my point i'm sure. Please observe the forum policies and search, read, and THEN post in the appropriate thread.
I agree with post #2, this is a simple fix...just install a htc home cab again, and the error will disappear

Jeez, did you bother to read what the HHC program told you???
This is a very easy to figure out issue.
HHC is based on OLDER cab type plugins, that put the graphic files in a folder in \HTCHome.
Cooked in newer versions place ALL FILES IN WINDOWS.
So either manualy move the HHC downloaded files to \windows or reinstall a older cab file version.

Upgrading Opera

Hello! I appreciate very much what this comunity does for all of the pocket pc owners out there. That being said, could someone please post a how-to on upgradin Opera 9.5 without upgrading the firmware, please? I've searched the forum but people seem not to want to answer to this question. Maybe it's an idiotic question.. When i try to upgrade mine it says that it cannot remive the previous version, and when i press yes on wanting to continue at the end it says installation not successful! Any help would be much appreciated. Thanks!

Hmm... Doesn't anyone know this? 75 people read this and no one? I find this very strange. I hoped that other people were having this question. Thank you!

If you just want to upgrade, uninstall the old version if you are able and install the latest cab or find an upgrade version. If you can't uninstall, just install the new version overtop of the old. If you install over top make sure you are launching the proper executable. You can check your version by going to help, about Opera, and look for your build version at the top.That's it!
Next time try doing a little more reading, the answer is out there!!!!!

To Upgrade the Stock Version of Opera on a Diamond
Hi. It's unusual that somebody hasn't posted these complete steps before. So here we go:
To upgrade the stock version of Opera on a Diamond without flashing a new ROM
1. Go to the Opera thread here. Don't bother trying to install the official (non-Diamond) beta of Opera as it's more trouble than it's worth. Use the official Diamond Opera betas in the link here. You also should not try to uninstall the Opera version you already have on your Diamond
2. Download the Diamond Opera version that you would like. Choose the Upgrade zip package, not the Full Install package
3. Open the downloaded zip file and extract the three files (Opera9.exe, OperaL.exe, OperaPreL.exe)
4. Transfer these to a folder on your Diamond. eg "New Build"
5. Make a backup of the original Opera9.exe, OperaL.exe and OperaPreL.exe that is in the Windows folder of your Diamond. This is in the event that the new Opera build doesn't work as expected and you want to go back to the previous version
6. Use Resco File Explorer or similar to copy and paste the three files from the "New Build" folder to the Windows folder on your device. This will overwrite the old Opera files with the new ones. You can't use the standard WM6 File Explorer to do this as it won't let you overwrite the old files
7. Reset
8. The new build of Opera is now installed. Before you do anything else, return to the Windows folder on your Diamond and locate the "ghost images" of the older Opera build that are left behind (these have filenames along the lines of Opera9.exe.$7 and OperaL.exe.$22 or similar; make sure you don't try to delete the newer Opera9.exe and OperaL.exe files!) Deleting these unnecessary "ghost images" will free up lots of space.
For the record, I'm currently using build 1938 of Opera (extracted from a newer Diamond ROM). I don't recommend using the newest 2128 build as it comes with lots of issues such as excessive boot time, problems loading TouchFlo 3D favourites, etc. I think this new build is only designed to work alongside a newer version of TouchFlo 3d. The 1938 build works great for me though. Very quick, no issues. Still waiting for them to improve the Favourites list in Opera itself; it's a shambles.
Hope that helps
Dave

thank you
Now this is what a call a very good walktrough! Thank you for your help! I installed the version you sugested and it works perfectly! I guess it's quite easy when you know what to do.

+1 Thank you for this clear explanation.
Ciao
Fred

Thanks for the brilliant guide, I tried a cab upgrade earlier and killed opera completely (had to restore my sprite backup from the morning).
I'll give this a go

THANK you for the VERY clear and well written set of instructions on this, I just got my Diamond (US Unlocked Version) today, and you saved me a lot of headaches!

i upgraded to opera 9.5.2745
just run the .cab and it was done without any problems...
but the icons turn out really small after the install.. other than that, everything works great?
got my opera from this link (not sure if external links are allowed, pls remove if its not!)
http://www.ipmart-forum.com/showthread.php?t=303148

zer0tr said:
i upgraded to opera 9.5.2745
just run the .cab and it was done without any problems...
but the icons turn out really small after the install.. other than that, everything works great?
got my opera from this link (not sure if external links are allowed, pls remove if its not!)
http://www.ipmart-forum.com/showthread.php?t=303148
Click to expand...
Click to collapse
You might have a QVGA version. This thread has links to both VGA and QVGA versions, but there is apparently a problem with the VGA version posted:
http://forum.xda-developers.com/showthread.php?t=442252
See post #115 of the thread, someone has helpfully posted instruction on how to get the QVGA version working in VGA. Simply replace the skin file and the loading image (png file) and edit your opera.ini file with new zoom settings.