Handwriting recognition - Tilt, TyTN II, MDA Vario III General

does the kaiser come with any, can you add it?

meandu229 said:
does the kaiser come with any, can you add it?
Click to expand...
Click to collapse
Windows mobile comes with the "Transcriber" input method, which transcribes your handwriting. Just switch from the default onscreen keyboard to the transcriber and you're good to go.

It comes with the standard WM6 recognition (Transcriber and Block recognition)

thanks i found the input method bit on settings but when i change it and press ok if i go back into it it changes back
Found it no bother sorry

transcriber cab
anyone know where i can find the transcriber cab? need it for a wing.

Related

Scandinavian characters (ö,ä)?

How can I map scandinavian characters (ä, ö) to my hardware keyboard and how to get them into the on-screen digital keyboard as well?
-John
johniemi said:
How can I map scandinavian characters (ä, ö) to my hardware keyboard and how to get them into the on-screen digital keyboard as well?
-John
Click to expand...
Click to collapse
I use Resco Keyboard Pro (Screen Keyboard, I don't know if it works on the hardware keyboard as I have an Alpine, you can set a secondary the keyboard language, and just press a key on keyboard and you can swap to a Norweigan keyboard, I know cause I have a sister in Norway.
Download demo from here to try out.
www.resco.com
So it can also remap the hardware keyboard?
-John
No, you allready have it. Pres 'a' or 'o' button, then doublepres dot button. After that pres space for as manu times than 'a' becomes 'ä'. Enjoy!
Is there not a faster way? Like a registry hack that would give "ä" when pressing "a" twice very fast? I think that would be a lot faster method - doubleclicking "a" rapidly to get "ä".
Could this be done with a registry editor?
-John
johniemi said:
Is there not a faster way? Like a registry hack that would give "ä" when pressing "a" twice very fast? I think that would be a lot faster method - doubleclicking "a" rapidly to get "ä".
Could this be done with a registry editor?
-John
Click to expand...
Click to collapse
Changes Sym-button order,that a-letter changes first to ä-letter and then to å-letter. ö-letter the same
http://www.qtek.fi/9100tuki.htm
http://www.qtek.fi/Qtek9100/Sym-patch.exe
Hej! How do you make this characters with Swedish ROM? I don't have it here, so can't say. Do you know?
The other way is to install Aekmap and remap buttons according to the way you want them to (ae.inc.ru)
tavi said:
Changes Sym-button order,that a-letter changes first to ä-letter and then to å-letter. ö-letter the same
http://www.qtek.fi/9100tuki.htm
http://www.qtek.fi/Qtek9100/Sym-patch.exe
Click to expand...
Click to collapse
I don't have a Finnish version of the Wizard so I can't download these (wrong IMEI). Could you please email the Sym-patch.exe to [email protected]
Thanks!
-John
cBorisa said:
The other way is to install Aekmap and remap buttons according to the way you want them to (ae.inc.ru)
Click to expand...
Click to collapse
I tried Aekmap but I just couldn't customize it. The menu was hard to use, is there a help file somewhere?
PS. Also, I can't see any scandinavian letters on the Full Screen Keyboard.
I don't know why everything has to be so hard with these Win CE devices, I never had problems finding easy to use programs for my Palm devices...
-John
DAz999 said:
johniemi said:
How can I map scandinavian characters (ä, ö) to my hardware keyboard and how to get them into the on-screen digital keyboard as well?
-John
Click to expand...
Click to collapse
I use SPB Keyboard Pro, you can set a secondary the keyboard language, and just press a key on keyboard and you have your characters, I know cause I have a sister in Norway. In fact I use a lot of their software, which has improved the WM2003 no end.
www.spbsoftwarehouse.com
Click to expand...
Click to collapse
OOPS Sorry, I use so much SBP software, its not their keyboard program I use, it is Resco Keyboard Pro at http://www.resco.com :lol:
johniemi said:
I tried Aekmap but I just couldn't customize it. The menu was hard to use, is there a help file somewhere?
PS. Also, I can't see any scandinavian letters on the Full Screen Keyboard.
I don't know why everything has to be so hard with these Win CE devices, I never had problems finding easy to use programs for my Palm devices...
-John
Click to expand...
Click to collapse
Well, in order to make it work you have to read an AEC FORMAT section at Aekmap page.
You may contact me via ICQ or by PM and I will explain you in details if the web-site doesn't give you a clue.
Solution to get scandinavian characters (å, ä ö)
This is the most simple way to get scandinavian/Swedish charset on your device.
Hardkeyboard:
ftp://xda:[email protected]/Uploads/HTC_Wizard/Misc/Swedish hardkeyboard fix.zip
(Source:http://www.smartmobile.se/)
Softkeyboard:
ftp://xda:[email protected]/Uploads/HTC_Wizard/Misc/Scandinavian softkeyboard.zip
(Source:http://www.epocket.no/tastatur/)
No tweaking needed.
Have a nice day!
Hi, resurrecting an old thread... I just got a new HTC Wizard and I can't get the softkeyboard from http://www.epocket.no/tastatur/ to work.
I installed it, and it shows up on the Remove Programs menu but I can't use it... I mean; I can't find the program anywhere and the softkeyboard looks the same as before.
-John

Word Completion problem

I was wondering if anyone has the same problem as I do. I am using ROM 1.34.8831.1 WWE and my word completion and word correction does not work.
I have tried START/SETTINGS/INPUT/WORD COMPLETION. but it changes nothing.
Comments or suggestions please..
Thanks
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Keyboard
dutch64 said:
I encountered the same problem (I prefer the standard MS keyboard). I tried registry tweaks but must have missed something because still didn't work.
Then I installed KaiserTweak and in there disabled XT9 support and since then everything works great.
But again, that's for the default keyboard, it did work without tweaking on the diamond keyboards.
Click to expand...
Click to collapse
I am using the MS keyboard. I will try your other suggestion. Thx
update your ancient rom.
billybobjones said:
update your ancient rom.
Click to expand...
Click to collapse
I am now using a modern ROM and it still does not work... any other suggestions
word completion with block recognizer
Hi
HTC in Australia) support clearly advise that word completion will not work on Touch Diamond when using block recognizer.
Is there anybody out there that can add this feature to the Touch Diamond - even if it is not available on other input methods?
Word completion does work for block recognizer, do as dutch64 mentioned.
Strange...i have exactly the oposite problem
i don't like word completion feature, and so i try all ways to disable it (from settings menu and from Advanc. conf. tool), but i only get it 100% disabled when i use Panosha ROMs ...

Handwriting recognistion with stylus

Hallo people,
I would like to use the stylus for handwriting (for example appointments). Is it possible with htc touch diamond?
If not please recommend me some softwares where I can download.
Thank you in advance.
Greetings!
Sony
This used to be a feature of NOTES, no?
Yes it is possible
Tap on the Arrow visible next to the keyboard Icon appearing in the center of the screen (when you are in the Text Screen, or appointment or email or...)Tap on Other input methods
Block Recogniser
Letter Recongniser
Transcriber
They are all capable of handwriting recognition.
Personally, I prefer the Letter Recogniser.. but it's your call
All the best
Does anyone know how come I don't have any of that?
No block recognizer, no transcriber... nothing.... just typing is possible... reg key?
akito said:
Does anyone know how come I don't have any of that?
No block recognizer, no transcriber... nothing.... just typing is possible... reg key?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=406136&highlight=draw+letters
In that thread, there are people who mentioned not having the transcriber either..
Perhaps you could PM them and see if they have managed to find a work around
Thanks! Hadn't discovered that one yet

Keyboard layout and T9 function

Hi all, just got the diamond last week, damn its nice, just the battery life sucks.
I used to own a UK T-Mobile Mda 3, loved the calender as i change shifts a lot, was looking to replace it a few months back heard tell of the diamond so decided to wait.......however...
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
also, is there a website that lists all the compatible 6.1 programs? not sure what i want, but more like teeter would be nice, or even a different sms prog that allows predictive text!!
Cheers
Lepak
lepaknerat said:
The sms full keyboard on my old MDA3 used to allow predictive words (t9 i think) but the diamond does not seem to, I like the keyboard layout over the qwerty or comapct qwerty as they both take up too much for the screen for my taste.
The t9 does not seem to work in the keybaord layout, i think i have all the settings correct, as it works in the other 2 setups but not keybaord.
Lepak
Click to expand...
Click to collapse
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
unvisigoth said:
The same for me. T9 works only using qwerty layout. If you use keyboard layout predictive text doesn't work. Someone has an idea ? My rom is 1.37 from HTC official italian.
Thanks in advance
Click to expand...
Click to collapse
Found it ! Thanks to newtonmj in modaco forum
You must chaange the registry key XT9SupportMSSip in HKLM\SOFTWARE\Tegic\eT9\ from '0' to '1'.
This allows the predictive text to work correctly in standard keyboard too.
I don't know if this mod can "damage" other settings but I don't think. It allows the predictive input to work using microsoft standard keyboard. In my device now works !
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
[email protected] said:
http://forum.xda-developers.com/showthread.php?t=412048
PocketCM Keyboard, VGA resolution
Click to expand...
Click to collapse
Very nice. I think I'll try it. But I wanted that worked correctly standard keyboard without adding third part software. What is standard in my device MUST work correctly. Then perhaps I'll not use it, but this is another thing
I'm paranoic. But I can't accept that a phone worth about 500€ does't go in the appropriate way......

HELP: ENABLING Block Recognizer in input menu?

Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
gnarolibero said:
Hi all,
just got my topaz and flashed a cooked ROM (wm 6.5 LP EVO V-ITA to be precise).
i really need to enable block-letter recognising, after years practising i cannot live without...
afer some search, i have tried editing this
For letter recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
For block recognizer:
Code:
[HKEY_CLASSES_ROOT\CLSID\{42429691-AE04-11D0-A4F8-00AA00A749B9}\IsSIPInputMethod]
"Default"="1"
but apparently is not working
can somebody pls help me?
thks
GG
Click to expand...
Click to collapse
I have a cab (thanks to !Aman!). You can get block recog.cab from my Topaz File Mirror.
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
"]!Aman![/URL]). You can get block recog.cab from my Topaz File Mirror.[/QUOTE]
gnarolibero said:
thks but is not working...
anybody knows the proper registry tweak?
thanks in advance
gg
Click to expand...
Click to collapse
strange it works for me on WM 6.1
what ROM are you using it for?
BeeGee_Tokyo said:
strange it works for me on WM 6.1
what ROM are you using it for?
Click to expand...
Click to collapse
I'm trying to get the Block recognizer too.
It seems to me that Microsoft blocked it in WM 6.5
EzInput 2.1 doesnt support old SIP methods like block recongniser, thats why it doesnt work for you guys.
!Aman! said:
EzInput 2.1 doesn't support old SIP methods like block recognizer, that's why it doesn't work for you guys.
Click to expand...
Click to collapse
Hey Aman, but at Microsoft WebPage, they talk about the input methods for WM 6.5 and Block/Letter Recognize are there !!!!!!!
I though that the nes versions of cooked ROM's would be able to have then too.
Finally working BR and LR
Originally Posted by NothingBetterToDo
So sorry for keeping you guys waiting. The following are the steps I took based on my memory.
To enable the Letter Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429690-AE04-11D0-A4F8-00AA00A749B9}\IsSipInputMethod
"Default"="1" – Enabled
To enable the Block Recognizer SIP, set this to 1:
HKEY_CLASSES_ROOT\CLSID\{42429691-ae04-11d0-a4f8-00aa00a749b9}\IsSipInputMethod
"Default"="1" – Enabled
You will notice that this will not make the SIP appear, for example, in your SMS application. However, it should appear in the pulldown menu at Start->Settings->Personal->Input. Now, if you try to set the Letter Recognizer as default, thinking that it will appear in SMS application, it doesn't. For some reason, it will always default back to the Touch Input (or EzInput) SIP.
So, the next step is to make the Letter Recognizer SIP the default. To do that, check the value at
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
It should be "0654897B-B359-473F-B28B-D85CF601C57F" (for Touch Input SIP). Replace that with
"42429690-AE04-11D0-A4F8-00AA00A749B9" (for Letter Recognizer SIP).
WARNING -- very very important to make sure the above is entered correctly. According to some posts elsewhere, a non existent SIP can crash your device. You might want to confirm if you have the Letter Recognizer SIP by searching for the msim.dll file. If it exists, I suppose it is probably safe.
After soft reset (power on/off device), you should now see the Letter Recognizer in your SMS application. However, you will also notice it doesn't work properly. For eg, the Capital Letter (left panel) doesn't work, there is this irritating word suggestions thing that keep popping up, it is quite slow and quite inaccurate, the Help doesn't work well.
To resolve these problems, set the following to 1:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ezsip\IsOtherSip
Do a soft reset and the problems should disappear and you have a good Letter Recognizer to work with (even with fingernail), save for the following problems:
a. Sometimes response may not be very good. Can be quite slow especially if you are entering letters like "i", "r". Maybe this is because of the screen sensitivity.
b. If you click on the little triangle and want to switch to the Touch Input SIP, you can. But the problem is that you can't switch back to the Letter Recognizer anymore unless you do a soft reset. I guess this is OK if you use Letter Recognizer exclusively, but if you want the Chinese Handwriting feature in Touch Input (which is pretty good IMO), then it is not good.
Sorry for the long post. Thought it is better to also share my observations. I am a newbie with registry thing, so I prefer to do step by step and hence many soft resets. If you are gungho enough, just do the steps in bold followed by a soft reset. Hope it works for all you guys.
Note -- if you don't feel safe doing the registry changes, an alternative is to use the Touch Input SIP but set the waiting time to the shortest possible which will reduce the delay. But it is still very irritating to use IMHO.
Cheers
Just to remember all that the solution I described at the previous post is not mine and was Originally Posted by NothingBetterToDo. So, many thnaks to him for the great solution !!!!!!
Info for the ones that doesnt have en version
Hi
Info to all of you with other language then english.
The file msim.dll are country specific, in sweden its called msimsw.dll so i guess you will be able to find your version if you search the registry for msmi and then you will find a msmiXX.dll that is the correct one for your country.
I hade to add the info for {42429690-AE04-11D0-A4F8-00AA00A749B9} and {42429691-ae04-11d0-a4f8-00aa00a749b9} because it was missing info so it's not enought to only change the IsSipInputMethod to 1.
I have attached the files i used, but plz realise that this one is for swedish a version. You can edit the files with notepad to adress the localized .dll file for your country.
After this to be able to use the input methods i did what nicksalgado said and change
HKEY_CURRENT_USER\ControlPanel\Sip\DefaultIm
to {42429691-ae04-11d0-a4f8-00aa00a749b9} to use Block recognizer as default im
/SebulbaSe
Hi
I have the "RUU_Topaz_S_HTC_SPA_2.16.412.1_Radio_Sign_Topaz_61.44tc.25.32_4.49.25.17_Ship", and has the same problem that you describe. I use the HTC Pure from AT&T, and in the original AT&T ROM the Block Recognizer work it just fine. Is there a way to captura a cab to use to solve this problem from the original AT&T Rom?? Regards
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
yulbeast said:
OK The tweak worked for me. Now I have got rid of that annoying keyboard. Anyway I would like to have the option of choosing the keyboard in a drop down list like before the rom update. Now the block recognizer is the one and only input method.
Click to expand...
Click to collapse
Use this app to choose your SIP.
Activation of the Letter/Block Recognizer cookbook
Hi all
thanks, it works perfectly on my Topaz.
How to desactivate properly and completely block recognizer (register and so on) of my Topaz now, because I want tu use the SPB Back Up of my Topaz on my Touch2..and I am sure I will Have some problems with this change..?
Thanks
It's not a good idea to use a full backup file from one device to a different one.

Categories

Resources