i try to upgrade my pda2k with wm6...but screen remain with 4 stripes coloured...so i would to know if is possible to came back in wm2003.
thank you.
Yes, you can back to wm2003. By same as you upgrade to wm6. First of all, you might be have lastest official wm2003 or what ever you want. Then make your BA into boot loader mode (Power, REC and Reset at the same time), display will shown you "USB Serial. Put it to cradle or cable that connect to PC. Run your official rom and following the instruction.
thank you!
and where i can take this 2003 rom for my pda2k?
thank you
before you do... try to "Hard Reset" your WM6 first....
Steps:
1. Stick the reset button.
2. Quickly press and hold the two side buttons
(record + camera) simultaneously before the hardware display.
3. Select No Yes Yes in the given option
(press record to navigate on the three option)
(press camera to toggle Yes/No)
4. Press your mail button....
or second button from the left of your four button shortcut keys.
5. (optional) Cross your fingers and kiss your phone.
i've had that problem when i flashed mine with Xplode's ROM and that solved the problem.
Related
Dear all,
I have tried to upgrade the ROM for my Breeze (Dopod 595) with Futureshock's firmware but was not able to do so. The device would not go into boot loader mode. Basically the device will reboot/restart when I press the camera and power button combination. I do see that my device CID = DOPOD001 via the mtty. The IPL=0.9 and SPL=2.05 Has anyone successfully upgrade a dopod device? Thanks.
Regards,
Kueh
Dear all,
I have found the answer to my own question. For what ever reason, I was not able to get camera and power button combination to work. However after 4 hours of trying, I have manage to get working. Here is how?.
1) Make sure that the ActiveSync is working and the device is connected and synchronized.
2) run the runme.bat
3) The step where the batch program ask for you the do press the camera and power button and press Enter. Do the following.
a) Press any key on the computer.
b) Wait for a moment.
c) A prompt will appear on the device to ask for permission to run the program.
d) Now hold down the power button (continue pressing until step f).
e) Press the Left soft key (the key nearest the screen on the left).
f) As soon as you do the step e, press the camera button down.
( For step from d to f, I have to get help from another person as it happen very fast especially from step e to f. If you miss it by half a second the machine will be rebooting.)
4) Now you should see the three colour screen.
5) Release the buttons that you are pressing
6) Continue with the instructions as per normal.
Hope this helps.
Regards,
Kueh.
when you are upgrade your device you must may sure that you have to do it fast !!!or you will be fail !!!i have try it over 10 times, the first time i upgrade my breeze!
Hi guise
I have diamond to test it
it hungs on screen (smart mobilty):mad
how can i format it ?
i tried by pres and hold buttons with rest ::
dont the manual spc how a hardreset is performed ?
Rudegar said:
dont the manual spc how a hardreset is performed ?
Click to expand...
Click to collapse
It dose not manual.
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Did it come with a CD? I think there was a copy of the manual for my Touch on the CD that came with it.
rorydaredkign said:
download the rom here http://forum.xda-developers.com/showthread.php?t=394985
then go into bootloader [looking for how to now] bootloader is tri-colour screen
and run the exe from that download
you should be ok after that
to get to bootloader, try holding volume slider down and then soft-reset, or try up and soft-reset
the bootloader is usually side-of-device button combinations.
if those dont work, try the ront buttons and the reset button
Rory
Click to expand...
Click to collapse
Thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
all right
what combination did you do to get to bootloader? just so we all know
im glad to help
Rory
rorydaredkign said:
im glad to help
Rory
Click to expand...
Click to collapse
lol
You should use that as a motto.
go to bootloader is:
hold down button and press (red) reset button
Bingo! This is the same as what the manual said. YJ
Use2Smoke said:
go to bootloader is:
hold down button and press (red) reset button
Click to expand...
Click to collapse
I found that the manual is wrong. The way to perform a hard reset of the Touch Diamond2 is:
1. With the Touch Diamond2 switched off, press the volume up and down buttons simultaneously.
2. Keeping them pressed, use the stylus to briefly press the red soft reset button (you’ll have to remove the back of the Diamond2 to do this).
3. Release the volume buttons when a message flashes up to say, “This operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel.”
4. Press the volume up button.
Hi guys. I'm really new to BA upgrading. I have purchased an O2 XDA IIs thru Ebay and would want to upgrade it from its current WM 6.1 to WM 6.5 OS.
The problem is, I cannot sync thru Activesync, everytime I insert my device thru its USB cable it says "USB Device not recognized".
I also have an O2 XDA II and it does not have any problem syncing.
I have already tried every USB port of my PC and all displayed the same situations.
I'm using Activesync 4.5 and I have tried upgrading it and since its not even "recognized" in the end the upgrade tool would say "The ROM upgrade kit is not designed for my device".
I can put it in Bootloader Mode and it says "USB" mode everytime I connect the data cable to my PC.
Another problem I think is that I cannot do a HARD RESET. I mean I can put it in HARD RESET Mode where it asks me to choose YES or NO on 3 options, somehow, I cannot go beyond that. I dont know which button to press to activate the reset. I mean, I tried every button but no hard reset happens.
Guys I know you can help me on this. I think I'm gonna need your "divine influences" on this matter. Cheers.
if you are running vista OS or above, please refer to the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista
to perform a hard reset
1. hold down power button + press soft-reset
2. immediately, hold down Power + Record + Camera buttons
3. Option 1 - No, 2 - Yes, 3 - Yes
4. Press Mail button
PS: please take out the SD card when during the flashing process.
Help, help!!!! (
Certainly when upgrade from WM03 to WM06, we all must go to the boot loader option to clean registry, disable KITL, clean storage...etc . However,poor me, I have an XDAII with broken record and camera button, so that I can not get in Boot Loader ( Press ResetButton and hold down CameraButton + RecordButton )
So could any one solve this problem?
many thank!!!!
As this is a mechanical problem, - you can't press buttons, which are physically not there -, there is no software solution!
A little workaround might be possible, but untested yet:
As it is not necessarily so, that you have to do a hard reset to end upgrading,
you can try to skip it, in case the last thing you did in WM2k3(SE) was a hardreset.
There should no difference to a fresh upgraded system, which had done a hr afterwards, but it's untested!!!
To do a hard reset on a running WM5 or WM6.X system, you can try to downgrade, hardreset WM2k3(SE) (As I remember this OS does use this buttons to hr) and then upgrade again. It looks wierd, but might work.
For cookers only:
I suggest to use: http://forum.xda-developers.com/showthread.php?t=510805,
as it's a WWE rom without camera-function for cooking.
Delete everything that belongs to the camera to get a little bit more sectors to fill with apps and proggis you need.
Thank so much for your helping, your guiding is quite clear and detailed but....it's not work surely. The way to get in boot loader depend on model of Xda, not depend on the version of rom. The Himalaya use fomular "Reset +Camera + Button" permanent whatever u use any wmXX
Well, I use Powerbutton -DPad -Reset to enter bootloader. No use of Camera button there.
In WM2k3(SE) the hard reset is powerbutton and reset, as I remember, please correct me, if I´m wrong.
Still no use of the missing button.
Enter bootloader and flash, then try to skip hard reset. Although it is better it is not needed.
To do a hard reset on a running WM5/6.X system use the tool of post#18 here:
http://forum.xda-developers.com/showthread.php?t=351811&page=2
Change options to allow hardreset, tap on left upmost icon twice, tap and hold hardreset and run selected.
Voila, no button needed!!!
Tap the icon left of the '?' and enter anything you want. Congratulations.
Flasehed this ROM: 23563 V2 FULL WWE-ITA using Jump SPL 1.93 which went fine but later after installing the apps asked to reboot.
Once clicked on the reboot unable to get the phone back.
Does anyone have any ides on this. on how we can recover this. Or Flash another ROM from this state.
Moved as not ROM Dev.
By unable to put back on i imagine you can't power on device? Remove battery and try after an hour or so.
If not then maybe the end of the road.
kkp said:
Flasehed this ROM: 23563 V2 FULL WWE-ITA using Jump SPL 1.93 which went fine but later after installing the apps asked to reboot.
Once clicked on the reboot unable to get the phone back.
Does anyone have any ides on this. on how we can recover this. Or Flash another ROM from this state.
Click to expand...
Click to collapse
why did you use jumpSPL to flash a complete ROM???????????
its written everywhere that jumpSPL is only meant to flash HardSPL...and HardSPL is needed before you can flash any ROM. i mean why???????!!!!!
follow the advice the chef gave you in the thread for the ROM because i noticed you posted your question there as well in addition to starting a new thread here.
Try flashing Stock rom via 2GB or smaller SD Card. Check the wiki for Stock OEM Roms from your BRANDED Device.
mskip said:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Kaiser Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to KAISIMG.nbh
4. Copy the KAISIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
7. You will first see a tri-color screen with the phone and SPL Information at the top
8. A message will then pop up asking you to press the Power button to start the update
9. Press power button to start flashing
10. Once phone finishes flashing and says Update Complete, reset with the stylus
11. When it gets to the screen where it configures the stylus, HARD RESET
(press left and right softkey buttons on the front and hold in reset with stylus until message appears)
12. When prompted, Press "Send Button" (Green Call Button on Front) to Clear Data
13. When prompted, Press "Send Button" (Green Call Button on Front) to Restart Phone
14. Follow onscreen instructions to set up your New Rom
Click to expand...
Click to collapse
Flashing Your First Kaiser Rom (For Noobs)
Guys,
Thanks for your advise, i have recovered my phone, i went into boot loader screen then flashed the original HTC ROM which is "TyTN II_AUS Hutch_WM6.1_Upgrade_20080602" which went through fine and ALL IZ WELL so far...
The reason i used the Jump SPL is that when i flashed normally, i was not able to get the ROM upgrade, it was throwing error message UPDATE error...
so
1. checked some info and Ran Jump SPL 1.93
2. Right click on the Active Sync then unchecked the USB connection
3. Connected back and ran the KaiserCustomRUU.exe
which went fine but anyhow learn lesson...
Thanks once again for everyone...