i tried phoning the tech support today, got the tytnII told them its the t-mobile vario 3 as they wouldnt understand what i was talking about....
i need someone to give me the cab for the settings, or tell me the settings that i have to do.
Right now, from kaisers setup manager, the connection wasnt working, i edited the "Username should be: t-mobile Password should be: tm" myself, nothing changed
i get the "answering modem has disconnected" and a popup saying there is a problem connecting to the gprs service in your home network"
i get the small 3g icon on the taskbar
Your post is a bit confusing. Do you have a real Vario III? If so you should already have the settings. If they are lost or messed up then go to T-Mobile's site and get them sent to you by text.
If you have the correct settings already then the message you've described is a symptom of the 3G bug I posted about in another thread.
You can workaround this by going into Settings, Phone, Band and change the network type to "GSM". It will then connect but you will lose 3G. Read the other thread for full details.
i have the tytn2 (aka htc kaiser), not the vario 3.
i ve read about the bug you posted and i can recieve calls fine when on 3g, tried the bit about chaning to gsm, but the same error pops out.
i ve used these settings:
"Choose T-Mobile Inter.
Edit
Connection name should be: T-Mobile Inter.
Next
Access point Name should be: general.t-mobile.uk
Next
User name : user
Password: one2one
Domain: leave blank
Finish"
as posted on modaco, again same error.
i am gonna ring the support again i guess.
Still confused - do you have a T-Mobile SIM then?
Toufas said:
i have the tytn2 (aka htc kaiser), not the vario 3.
i ve read about the bug you posted and i can recieve calls fine when on 3g, tried the bit about chaning to gsm, but the same error pops out.
i ve used these settings:
"Choose T-Mobile Inter.
Edit
Connection name should be: T-Mobile Inter.
Next
Access point Name should be: general.t-mobile.uk
Next
User name : user
Password: one2one
Domain: leave blank
Finish"
as posted on modaco, again same error.
i am gonna ring the support again i guess.
Click to expand...
Click to collapse
of course i have a tmobile sim
the problem was, that even i had the web and walk option on my account, gprs was disabled from their end for me.
now everything works, including hsdpa
Related
I have just got the HTC Mteor but I can't get it to work with GPRS on orange PAYG or Contract. I saw some files on this forum but it won't let me run them on the phone. Can anyone help me set it up please?
sorry to havent answerd your question in other thread...
when this from my post don't works:
http://forum.xda-developers.com/showpost.php?p=1244877&postcount=8
just google for the correct settings from your provider!!
or just call them that they say you the settings!!
also my provider has a map on his webpage where i can check what coverage is available in my location!!
also when you see the 3g symbol in top bar you are in a 3g location!
maybe you must have a special contract with your provider to start connections in 3g area?!
just try to set bandwidch to GSM (means only GPRS/EDGE) and test the connection!!
if this works your provider maybe have lock if you haven't a special "3g Contract"
I tried to contact Orange but they didn't have this phone on their list and then they gave me some settings that didn't work?
I don't think this phone works on 3G actually. I know it has GPRS covergae because there is always a letter "G" on the top of the screen. If anyone else has this phone on Orange then can you let me know what setting you are using please.
when your provider supports 3g then your phone have no problems!!!
UMTS is supported by mteor from factory out!!
HSDPA Supports is added with actuell Shipped ROM !!!
when you only have the G icon it means you have only configured (in bandwitch selection gsm) or your network coverage has only GPRS available!!
just check the settings under settings/phone/bandwitch(?!)
there are 2 lines first band: 1. AUto 2. GSM 3. WCDMA (=3g, hsdpa)
2nd is the region... should normaly be on auto...
I just checked the setting that you mentioned and it was set to auto on both options. I tried setting to the 3G and it said that it was not possible to connect when I typed in an internet address on internet explorer.
maybe you have not 3g coverage at your location!! or your contract didn allow 3g connection!! ask your provider!!
when configuring the data connection look to the modem options there you can select different modems .. just try gprs only
Hello,
I can't seem to get my GPRS working with my xdaIIs. I am on the Rogers network. I have the AKU3.5v2 R5 Xplode Rom version and the 1.15 Radio Rom. I have tried all settings and a combination of the settings. I found CABs by a forum member named Lurch, and they didn't work. Everytime it just says "the answering modem has disconnected" I do see the little "G" with the signal bars but that goes away after a few seconds. My eyes have become buggy from reading forum post after forum post. PLEASE HELP!!!!!
Does GPRS works for you with different phone? Have you activated GPRS at your OP's network? In short words: No letter G on top of the screen = no GPRS connection possbile (Op is not offering such service: at all or just for you).
I have a data plan with Rogers. My xda IIs shows the "G" at the top of the screen. Today i tried a new older radio rom just for fun and still no luck. I have a nokia phone that i can browse the internet with. ANy ideas???
well...i think u should look up your the website of ur SP...in my case there are standard gprs setting for the whole network...i mean, there is a gateway, pass, username etc...and it isn't much fuss with a common nokia, but with the BA, i had to define a new modem connection with all the parameters given...so check the Rogers website for more information...anyway in some cases they send such sms that will configure your phone, but i think only for nokia, ericcson etc...
Try the following, I had it working before with Rogers (but I didn't have data plan, so the GPRS ate up all my money in pay-as-you-go, so I removed the setting), those hourly weather update from SPB do add up on data transfer.
Name : Rogers
Homepage: www.mymobilehomepage.rogers.com
Service Type 1: WAP
Gateway IP 1: 208.200.067.150 OR 172.025.000.107
GPRS APN: GOAM.com
User Name: wapuser1
Password: wap
Where do i put that information in. I can't find any places to put in the gateway info.I made a cellular connection (GPRS) then added the APN internet.com. Then the user pass wapuser1 and wap. But it will connect with the "g" and show the bars. then it will say "the modem has disconnected" I don't know what can be going wrong.
Hey guys, I've had my Kaiser for a couple of days now. I've been having a couple of issues with it.
1 - Whenever I turn the phone on, do a soft reset or turn the 'phone' option on or off. I get this "Connection Setup" pop up which states " The operator does not exist in the database. please contact your operator for the connection settings. Conenction setup will redirect you to the Connection screen"
I then "hide" the message which triggers the "connection setting screen"
it also does it sometimes too when it comes in and out of network.
2 - My phone shows that I have signal but it doesnt seem like it's on the network. when people call me it goes to my voicemail and I can't send text messages. I have to eitehr Soft Reset or Turn the Antenna off then on again.
Any ideas?
Thanks!
1/ That prompt is the "setup wizard"
it is the same as you would select -->> settings -->> connections -->> connection setup
choose your country & operator in the drop down list ..etc
and for those like me ( Canada) in which the list doesn't covered ... you have the option to turn that "auto prompt" off by selecting "MENU" when you are on the same selection drop down screen.
~~~
2/ Kaiser comes SIM unlocked already ...
you might have an "non-activated" SIM ?? ( that's how it acts ...signal but no real network name )
you need to borrow someone else's SIM or make sure that the one in the Kaiser is "ACTIVATED" !!!
.. You didn't forget about the SIM ...did ya ??
kwanjie said:
Hey guys, I've had my Kaiser for a couple of days now. I've been having a couple of issues with it.
1 - Whenever I turn the phone on, do a soft reset or turn the 'phone' option on or off. I get this "Connection Setup" pop up which states " The operator does not exist in the database. please contact your operator for the connection settings. Conenction setup will redirect you to the Connection screen"
I then "hide" the message which triggers the "connection setting screen"
it also does it sometimes too when it comes in and out of network.
2 - My phone shows that I have signal but it doesnt seem like it's on the network. when people call me it goes to my voicemail and I can't send text messages. I have to eitehr Soft Reset or Turn the Antenna off then on again.
Any ideas?
Thanks!
Click to expand...
Click to collapse
1. start-settings-connection-connection setup-menu-enable auto configuration. u can disable it if your country and/or operator ar not in that list.
2. it may also be a problem on the network, ie. if ur in a crowded zone and there are no timeslots available on the air interface (mobile - bts), the mobile shows coverage, but cannot use the network, since no "channel" to communicate.
2) - I have seen the same problem with the HTC 3600 (Trinity)... it's the radio, it is not as sensitive as on regular mobile phones (my Nokia seems to be usable just fine in the same spot) - it shows signal but if called i get the "Out of the area of service or closed...". Don't know if it only happens in 3G mode or in GSM mode too.
Heeeei. Ce surpriza. Cati crezi ca suntem cu Kaiser in Romania?
Off topic, non english:
Nu stiu, cati?
Thanks for the reply guys!
I'm also in canada and I have an activated sim on FIDO so it shouldnt be a sim issue.
you're right it might be an network issue... but I never had this issue with my N95.
I'll keep an eye on it and see if it persists.
Thanks Guys!
I wonder how old your sim is with FIDO. when they switched everything over to Rogers my wizard was unreliable getting connections that my p800 was fine with.
A new SIM cleaned everything right up.
offtopic
nu stiu cati da inca unu de maine
zzone said:
nu stiu cati da inca unu de maine
Click to expand...
Click to collapse
Since it just entered Romania (Thursday last week), there should not be very many. On the other hand, since I have an online shop selling things like that, I can confess that I have already sold 6 devices like that myself, so I can imagine there are already some.
One more here.
Orange SIM.
Location: Bucharest.
One more here.
Vodafone SIM.
Location: Bucharest.
UnicornKaz said:
1/ That prompt is the "setup wizard"
it is the same as you would select -->> settings -->> connections -->> connection setup
choose your country & operator in the drop down list ..etc
and for those like me ( Canada) in which the list doesn't covered ... you have the option to turn that "auto prompt" off by selecting "MENU" when you are on the same selection drop down screen.
~~~
Click to expand...
Click to collapse
Worked perfectly for me !!!
Thx
For some strange reason my phone thinks I am roaming when i'm not and keeps warning me about additional data charges everytime I check my email. I tried to choose my provider from the dropdown list but there are no Canadian providers listed..... and yes I am in Canada. I don't mind the warning so much but it also won't connect automatically and check my email. How can I fix this?
thanks.
Hi Dongetti
Welcome to XDA-Dev
Your question is fine, but it would be better placed in the regular Kaiser forum as it does not related to Upgrading/Development.
I will move it to the Kaiser Forum with an expiring (6hrs) redirect from the Kaiser upgrading Forum. So by tomorrow you will know where to look for it.
Cheers
Mike
Where in canada do you reside? are you close to a border of some kind?
Roam?
I have that same (problem) with my 8525, after I got the Tilt I added a second line and even though the phones have shared minutes and are billed together the Hermes still thinks it's roaming when the Tilt doesn't.
I called the carrier and she told me it was a fix on their end and that I would have to call back to customer service, it's not the phone or ROM.
dongetti said:
For some strange reason my phone thinks I am roaming when i'm not and keeps warning me about additional data charges everytime I check my email. I tried to choose my provider from the dropdown list but there are no Canadian providers listed..... and yes I am in Canada. I don't mind the warning so much but it also won't connect automatically and check my email. How can I fix this?
thanks.
Click to expand...
Click to collapse
I'm running Dutty's WM6 on AT&T Tilt, in Toronto on Rogers, works fine.
Thanks for the replies....
By the way, i'm running Sleuth 1.0 on AT&T tilt and no I don't live anywhere near the US border.
I'm having the same damn problem. In the morning there's a stupid triangle up on my today screen. Is that what you are talking about?
No my problem is this:
go to control panel (start -> settings ).
Then go to the connections page.
Then tap connection setup, it will give you a list of Countries to choose from and and then a list of providers below that. The problem is that my provider is not listed and that makes the phone think i'm roaming when I am not. Even though I enter my connection settings manually it won't connect 'automatically' to check my email. Therefore, I have to go in and send/receive manually to see if I got any new mail and it always warns me that i'm roaming(when i'm not) and checking my email may result in data charges.
That's not your problem, you can always manually configure your connection settings to your carrier's.
The problem is that your phone think's it's roaming based on the wireless signals from the tower...
dongetti, probably you're using fido sim?
if that's the case, then it's not fixable. As you know since Robbers acquired Fido, they have integrated the tower. But for some reason, the code for fido was being left in your sim (they don't change it to Robber's code). No other choice than to use Rogers signal, since that's the only one available now anyway.
Are there roaming charges if it is roaming between rogers and fido? even after the merger?
SHiBBi3 said:
Are there roaming charges if it is roaming between rogers and fido? even after the merger?
Click to expand...
Click to collapse
No there wont be any roaming charges.. for more info on this check the fido section in the howard forums website, also you can check with fido's customer service about this issue
i've been with fido for about 3 years now with an unlocked phone right from the start and every phone i've had has the little roaming symbol at the top, but i've never seen any roaming charges on it yet
Hi, first post, searched a little...need help
I bought a tilt in December from AT&T, an 8900 non camera. I'm in S. Korea and I cannot get service. I have international roam activated and AT&T has confirmed account settings are correct...Here's the deal:
1. Phone searches for a few minutes and the I get an exclamation point.
2. Goto phone settings and see "no service"
3. Change network settings from auto to manual.
4. Phone finds KTF and SK Telecom (the two providers here in S. Korea).
5. Tries to register and generally there is no feedback, but on occasion I have received the message "Cannot read settings from the network. Try viewing settings later or disconnect data connection and try again."
6. Data is not connecting.
7. AT&T technical support (level two after the customer service rep) says the problem with the tilt is I cannot force it to use umts 2100. Then he came up with the idea that my SIM is from AT&T and that's the problem, I have to go get a local SIM from SK Telecom, but I was here in October with a Palm750 and an ATT Sim. Worked like a charm.
I'm stuck....could use any help at all!!!!
Thanks,
Steve
Try this:
http://forum.xda-developers.com/showthread.php?t=370854
Thanks Kyphur...I was just installing the dll when you replied...(further searching) and now i've installed the advanced configurator. Band tab up, wcdma and UMTS 2100 selected....KTF and SK Telecom found and still nothing...
Any ideas? I'm pretty spent on this...
Anyone? this is a real pain in the you know what...I just think there is some stupid setting or something that needs to be change...Helllllppp
BUMP!! Help Please...
marenost said:
BUMP!! Help Please...
Click to expand...
Click to collapse
Are the carriers that you are referring to CDMA or GSM?
The local carriers are WCDMA/UMTS 2100 and I've downloaded the band tab dll from another post and confirmed that I am on the correct band...
I'm almost convinced it is an account problem. As of this morning my phone would continously come up with a "select" network screen (As there are 2 networks here). I select either and get the message "unable to register on the selected network, choose another or change data connection type"..
As I understand it, when I roam, my sim or phone # attempts to register across the local network to my home network and it needs authentication before I can have access...
what do you think?
bump....anyone with experience at all here?
In a simialar boat soon
I will be moving to Korea soon (Military) and I have an 8925 (unlocked) and I am wondering if I will be able to use my phone with either SK Telecom or KTF (both have GSM, I checked.)
If so, will I have to change anything in my phone? I'm using Dutty's WM6.1 Hybrid v2 5.2.19716 with the 1.65.14.06 Radio.