wifi - Wing, P4350 Herald Upgrading

need help have no wifi support

pbowman said:
need help have no wifi support
Click to expand...
Click to collapse
You need to be a little more specific...

when i turn wifi it does nothing does not show wifi on today screen

The today screen doesn't show the wifi unless you have a plugin that does. If you do and nothing happens, are you turning on the wifi through the CommManager? Or through the control panel? If it's through the CommManager, are you using a third party CommManager? If you are, make sure it's set to use the correct wifi device. Look around here and you'll find what I'm talking about. Unfortunately, I'm rushing out so I can't give you the specifics on what it should say and what it probably will say. (This is if on the top of your screen you don't get the little "antenna" like icon.)

i bricked my wing and restored it but know i have no wifi option. i can select to turn it on but it does nothing

Which ROM?
Which CommManager?
Are you doing it directly from the settings (control panel)?
etc.

Related

Avoid TyTN sleeping when using WIFI

How can I avoid WM going to sleep when I'm transferring "big files" with WIFI ?
yes of course.. just in the battery menu configure that PDA doesn't go sleep..
cheers.
It's already done...
In fact, I'm using "Slide to unlock" (S2U2) and I'm trying to sync my RSS feeds with "pRSSreader" using WIFI. After a few minutes, the screen goes to black and wifi is disabled...
So I'm looking for a solution to get my update and lock after finish
Another possiblity: Keep WIFI activated when going to sleep....
I use this to ensure keeping skype and msn online via wlan... u will find the registry key somewhere here in this board if u like it like this (just be sure to turn wifi off when u dont need it for battery reasons)
Hey lemmings,
The easiest way is to install kaisertweak.
There is an option in the XML file under Wifi Standby Mode: Enable the function
Soft reset and you're done!
caulirick said:
Hey lemmings,
The easiest way is to install kaisertweak.
There is an option in the XML file under Wifi Standby Mode: Enable the function
Soft reset and you're done!
Click to expand...
Click to collapse
The WiFi turning off on me has bothered me on occasion. I looked and I don't see any WiFi settings on Kaiser Tweak. I'm using Version 0.4 if that makes any difference.
Thanks,
Jay
Viva Kaiser Tweak ! I've use it to enable Wifi Standby Mode.
Yea, I hate that. Good thing they made Kaiser Tweak! I would be a forever annoyed by the sim contact list showing. . Is there a solution to hid them forever?
Just changed this. Thanks!
My university has a log in for Wifi and I was tired of logging in everytime my phone went to standby. Now I'm always connected!
Battery hog though.
Jay2TheRescue said:
The WiFi turning off on me has bothered me on occasion. I looked and I don't see any WiFi settings on Kaiser Tweak. I'm using Version 0.4 if that makes any difference.
Thanks,
Jay
Click to expand...
Click to collapse
I downloaded the latest version, which I find out is 0.41 (my old was 0.4) and now I see the WiFi setting. Thanks!
-Jay
The wifi standby freezes the phone on the Tytn.

Disabling data connection from service provider TROUBLES

Hey guys I am sorry if this has been covered before but I can't find it. I have an unlocked euro diamond but I'm using rogers as my service provider. I have wifi at home but when im away from home I don't want the diamond to connect to rogers data connection at all but from time to time it says its on. How do I make it so that I can use the data connection when I want to manually but at the same time automatically not connect to data from rogers?
Do a search for 'no data' it will allow you to control your data connections
do a search on this forum? Nothing really comes up with what I need.
I have a euro diamond on Rogers now aswell
I find this way works to disable data connection
All Setter --> Connections ---> Connections
once you in there see if you have anything rogers related, if yes just delete that set up (you prob let the phone set it up for you when you first start up your phone in Toronto)
as long as you don't set up a connection in that tab. It will never connect to any E and G
is this something I have to plug into like active sync to see or is it in the phone. I cant find anything called allsetter, thanks so much for helping though
teggboi said:
is this something I have to plug into like active sync to see or is it in the phone. I cant find anything called allsetter, thanks so much for helping though
Click to expand...
Click to collapse
it's on the phone.. slider the botton menu to Settings
THen in there bottom left there is a tab that says All Settings. Hit that then once you there.. you will see Personal, System, Connections on the bottom. Tap the Connection Tap, once you there.. you should see an icon that says Connections. Hit that also.
After that it will show all your current set up data transfer network. If you see one there. Delete it then it should be ok.
If you got more problems just continue posting here, I need to head out for a bball game will come back afterwards to help if you still need
Oh actually I see it and i deleted the rogers internet in manage settings its working nice thanks! But when im out of wifi range this means i cant update at all liek weather or anything. So what I just did disabled the E and G connection but my phone radio connection to rogers still works and everything related to data will work with wifi? Thank you so much big bro!
teggboi said:
Oh actually I see it and i deleted the rogers internet in manage settings its working nice thanks! But when im out of wifi range this means i cant update at all liek weather or anything. So what I just did disabled the E and G connection but my phone radio connection to rogers still works and everything related to data will work with wifi? Thank you so much big bro!
Click to expand...
Click to collapse
yes correct. now you can only update if you are in a WiFi region. If you are not then you just can't update data but your phone will still work cause that is another separate setting.
Next time if you don't want data connection, remember NOT to allow the phone auto setup internet connection setting (usually after it finishes configuring the phone setting).
Glad i can help!
The thing is that yes you are right, but when my phone comes out of stand by theres a G and then it goes into wifi after 2 seconds. Do you know why? Is it using data?
displaying G or E or H is just letting you know what kind of signal the phone can pick up.. as long as the reception bars icon does not have a G or E or H or 3G beside and has an antenna sort of thing beside the bars then you are ok.
I'm assuming it turns to WiFi right away because you have WiFi on right? Turn WiFi off and tell me if the same thing happens
yes and it makes sense thanks haha im just so new to this smartphone stuff. I want to make it run faster and better with rom updates and stuff but theres so much content i don't know where to begin. I want to do it myself but I don't want to mes it up. I just gotta learn from all of you. Thanks a lot bigbro!
teggboi said:
yes and it makes sense thanks haha im just so new to this smartphone stuff. I want to make it run faster and better with rom updates and stuff but theres so much content i don't know where to begin. I want to do it myself but I don't want to mes it up. I just gotta learn from all of you. Thanks a lot bigbro!
Click to expand...
Click to collapse
no problem! I'm glad I can help! This is my first smartphone too had to learn a lot of stuff but this forum has been great in proving info on the phone
oh there is just one more problem. After I click on all people under people, it will open all my contacts/people and their numbers but after i change a view option, i can't go into all people anymore from touch flo, any ideas?
teggboi said:
oh there is just one more problem. After I click on all people under people, it will open all my contacts/people and their numbers but after i change a view option, i can't go into all people anymore from touch flo, any ideas?
Click to expand...
Click to collapse
what do you mean by changing view option?
i was just toggling with the view options under menu when your in contacts. It wont let me back in all people or contacts unless I restart phone. All these people were moved over from rogers sim.
not sure about this. But I'm assuming it's a ROM issue.
Are you still using stock ROM? cause when i got this phone the stock ROM was VERY slow and buggy.
yes I am lol i would like to change it but im so newb. When you have time could you help me through it?
Im going to sleep and look at the tutorial/guides tmrw and ill msg u if i need help =p. GN thanks a million
teggboi said:
yes I am lol i would like to change it but im so newb. When you have time could you help me through it?
Click to expand...
Click to collapse
well all the ROM thread under the ROM Development section has all the instruction to how to flash a new ROM. Just REMEMBER to flash a HARD-SPL before you do any ROM updates or else it will brick your phone (dead phone)
My suggestion for ROM would be the dutty one. Been using it for the last 2 months and his ROM are clearly one of the best available out there.
The link for newest dutty ROM: http://forum.xda-developers.com/showthread.php?t=411707
I'm using his V3.6 FINAL (you can find it on dutty's website) not the V4 on his thread, but the instruction of flashing a new ROM is exactly the same, it has step by step instructions there for you to follow or you can go here for the instructions: http://lievenvw.wordpress.com/2008/09/18/howto-flash-your-htc-diamond-or-htc-touch-pro-with-a-custom-rom/
Hope this helps
This is probably what you need: MoDaCo NoData
http://www.modaco.com/content/pocket-pc-software/246171/new-free-utility-nodata/

Using Push Internet

I just got my TD2 yesterday. Been trying to figure out the settings for the push internet, but i can't seem to find the option to use WiFi connection instead of data connection.
Also i realised that the scheduling doesnt allow to set the minute only the hour.
Does anyone have this problem?
No one has any problem using this feature?
If you have WiFi on it should just use it I guess? Otherwise what you can do is setup your preferred connection not to be the mobile web one so it doesn't try and connect to the net over GPRS/3G.
I tried using Wifi, but it doesnt work. I still need to manually pull the sites.
When your phone goes into standby the WIFI connection turns off to save the battery, so unless you have your phone set to never turn off and keep WIFI active all the time its unlikely that it will use WIFI to push internet pages to you. Very little point doing it that way since you'd never have the phone last long enough to get out of the house in the morning.
Oh I reckon I know what might be wrong. You also need to change the schedules of when the phone polls for sites. You do it by day and stuff and do a start time. Once you visit each site once then that'll start the ticker so to speak. Mine autodownloaded at the set intervals after that.
Thanks Shuflie, u have a good point.. there is no point updating it via wifi. It needs to use a data connection. Thanks
DaBountyHunter: Thanks for the advice.. but i really think the problem is that i dont have a data plan with my telco.. i cant rely on WIFI since it disables whenever the phone goes into standby.
hi,
i'm a little bit confused about this feature!
i addet 4 sites to my list and if i got it right, there is a grey arrow if its updating and a green if its finished! is that correct?
but, when i surf on a site with a green arrow i can only see the main page, because if i tip any link on this it says error!
thats a total mess, the deep of min one link is essential...
do i something wrong or is this feature only a dream!??
I believe it only updates the pages on the main page. It doesnt save the entire site (i wished it did) cos it seems rather redundant when it only saves the main page.
hopefully someone can make a fix that it also loads the linked pages but i think it takes up too much memory/battery life and for example on news sites you only need the headlines, and if you want to read the article you'll have to wait a bit.
(for the Dutch, use tweakers.net/nieuws on your phone, it loads the articles instead of headlines)
well then in my opinion this feature is senseless!
quite true.. senseless.. might as well just use RSS feeds.
I still haven't received my TD2 (seems like it takes time for other languages as I'm looking for a french one which should be shipped on the 8th of May) but I still have a question regarding push internet feature.
What happens when roaming? Is there a way to disable it while on another network? Like a "disable while roaming" feature? Knowing the fees for data roaming, I don't want to spend money every time I'm going in another country...
yes, there is a 'disable when roaming' feature.
DaBountyHunter said:
Oh I reckon I know what might be wrong. You also need to change the schedules of when the phone polls for sites. You do it by day and stuff and do a start time. Once you visit each site once then that'll start the ticker so to speak. Mine autodownloaded at the set intervals after that.
Click to expand...
Click to collapse
i tried that, also tried many other things but i am almost defintely sure the 'add push page' is simply a bookmark button. the main conclusion for this is that i dont get any notification of the 'auto pull' and it still attempts to connect to HSDPA when opening one of these push pages
I stopped using it because it only updates the top page.
Where are the oush internet settings on rom official rom version 2.53?

Tracking lost phone?

I have tried using smartphonetracker, and some other gps tracking phone programs. They work great, but heres the PROBLEM:
Useless if device is in sleep mode, or if press the power OFF button.
So if it runs out of battery, or if its turned off, how can I find it by GPS?
Any solution?
sorry, if the phone is off / battery empty - no chance...
i mean, how should it work anyway?! sending a "dead" device the command to boot up and do something?
standby shouldn't be a problem for these programs or they aren't worth the money. i know that kaspersky's mobile security offers this feature. but so far i didn't buy it... (pretty certain it would mess with the system in some ways, make it laggy etc) phonecreeper here @xda should work as well.
oh, one more thing:
all these apps won't prevent a hard-reset or a reflash. in this case you could only disable the IMEI via your provider (sim-card is mandatory anyway) to make it really useless for the thief. (imei-changing is possible and apparently pretty easy, but instructions are pretty hard to find on the web... ^^)
I mean, when it is in standby mode, when u tap power off, then screen goes black.. it doesnt seem to work when its in this mode..
well, from what i've read about smartphonetracker, it SHOULD work in standby-mode. (if the phone is connected to a network to receive the sms)
if it doesn't you should ask the guy who wrote it? also you can find some support here.
caliban2 said:
well, from what i've read about smartphonetracker, it SHOULD work in standby-mode. (if the phone is connected to a network to receive the sms)
if it doesn't you should ask the guy who wrote it? also you can find some support here.
Click to expand...
Click to collapse
By connected to network, u mean internet connection? I want to track my gfs whereabouts, but she doesnt have internet connection on her phone..
Errr, you want to do what?! Oo
Well, I guess that's fine because she knows about it and does the same with your phone, right?
Since when do SMS need an internet connection?

Wifi doesnt reconnect automatically when switching places

I was using stock V10G rooted, with nova kernel and GPS Fix.
everything was fine but that rom was a bit slow, so i was testing sometimes marvel since v5, only for a few hours just to see performance differences.
When marvel v8 came out, i installed it among with all my new applications from scratch.
I did not use viber and skype yet, so i was closing/opening wifi just to see how far i can go with my battery.
When i found out that battery life was good enough for my needs, i chose in wifi settings to "never" turn off when screen is locked... having all the time my wifi enabled.
The issue appeared, when i was going from home to my office.
At home, my cellphone was connected all the time even when screen off, viber/skype calls incoming anytime... but when i was going to my office, phone wasnt connecting automatically on the new router...!!
Everytime im going from home to work or from work to home, i have to turn on my screen, wait a few seconds and it connects. Sometimes it doesnt connect but only does it when i open wifi settings. Just open settings without touching anything!
Noticed that everytime that happens, it has the old location wifi signals aqquired... and when i open settings after 1 - 2 seconds it refreshes back to the new location and connects.
Anybody has a clue about what's going on?
I've tried stock ROMs / Zeus rom / Marvel rom without success.
Does the secret menu has any settings that might help?
Does it have to do with hardware failure? (no other problems, works like a charm!)
How can i give a logcat to someone who wills to help?
First of all I think this is a question thread so it should go to q&a subforum
You should select "turn off wifi when screen off" setting. Its better for your battery, I've never had that problem when I select that setting but I'm using cm7 the only time it was when the driver had a problem but after the fix now everything is good.
about logcat you can use alogcat app in play store.
FDN
apologies for wrong category posting
My head was about to explode from whole day's work + this frustration
I know that wifi policy to turn off when the screen does, saves battery, but i'd rather charge it everyday and have viber / msn open almost all the time. Let's overlook that though, because i'm in need to have wifi always on and connected when able to (that's the reason of this topic)
I'm gonna try to capture a log and post it... if that helps
are you sure it is not router related? have you tried the same "always ON" option, while in connection with other routers?
Yes of course i have the "always ON" policy of wireless settings menu.
It's not router related, because in the past, 2.2 stock rom, was working flawlessly.
Besides, since then there are no router settings changed! (Both have the same settings since installed)
The thing is, that under Menu -> connectivity -> wifi , the list is not updated if phone is in sleep mode with locked screen.
When i change my location in example and go to my office, it doesnt connect and ONLY does it when i navigate at wifi settings, while the menu refreshes at that exact time it's list with available access points.
Okay, some feedback about this
(i dont see anyone having this issue? Or noone didnt bother about checking it? :S)
I've done many times a factory reset, rom change, etc... that didnt solve my problem.
"Played" with any configuration file regarding power saving settings, wifi settings, etc.
Let my cellphone chill the f*ck out, without battery in for a day LOL
Finally, i rollbacked, at 2.2 official unrooted (V10G).
Changed ALL possible combinations of my 3 routers having stored in wifi settings!
n o t h i n g c h a n g e d !
When phone is in sleep and changes location, doesnt auto-connect in any of those wireless routers! It only does when i get to wireless settings which refreshes the list, or wait with screen on randomly from a few seconds or till infinite (never).
So, last week, 1st June 2012 i've spoken with LG customer care, arranged a courier transfer for service (not in my city) and waited till 6th june when they sent back my phone.
The authorised service, which does the job for LG phones in Greece reported:
"Wifi turns off when screen off, due to power saving policy"
O, RLY you idiots??? Dont you think i dont know it, or i didnt mentioned that on that f*ckin A4 sized page i've typed out to explain CLEARLY my problem?
Or you think im a retard??
Of course, wifi policy is set to "Never"
LG authorized service center (3rd party company) is totally crap.
I'm going to send the phone again tomorrow.
If they still dont fix the issue, then i'll demand a sure fix the hard way!

Categories

Resources