How to Connect with Bluetooth GPS?!! - Tilt, TyTN II, MDA Vario III General

Could someone explain how should i set the settings to connect with a bluetooth GPS for tomtom
Thanks

lungothrin said:
Could someone explain how should i set the settings to connect with a bluetooth GPS for tomtom
Thanks
Click to expand...
Click to collapse
You are using an external bluetooth GPS with your Tilt?

Just want to try my friend's bluetooth gps and see how it works with the tilt

sherpa said:
You are using an external bluetooth GPS with your Tilt?
Click to expand...
Click to collapse
I think it would make sense for certain tasks such as Geocaching.
Kaiser's GPS doesn't work very well with Geocaching or in walking mode because there is no way of disabling of static navigation.

Related

TMC for Athena

Hi there,
Has anyone made a TMC device working on the Athena?
I tried some version of the GNS FM9 adpaters but nothing worked.
Any ideas?
Thanks in advance for your help!
Have a good start into 2008.
greetz,
DAx
I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!
adamelphick said:
I agree - this would be very useful. I have iGo on my Ameo and it is brilliant (cant wait for iGo 8 or MioMap 2008 for the 3d visuals and road names) but it would be even better if I could get warned of upcoming hold ups on the major roads!
Click to expand...
Click to collapse
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
hmm... thank for the link. That would be really the last chance to get TMC working for the ameo.
FYI, I use Mobile Navigator 6 and it fixes the gps signal really quick. I also use the Quick GPS and when I start MN6 the GPS signal fixes within 1 minute.
Greetz,
DAx
AndreasF said:
Hi,
just a question from my side:
I'm currently using igo with my Ameo and I have to wait and wait and wait and wait for the first GPS fix. It takes normaly between 5 and 15 Minutes until the first fix, even if I use the Quick-GPS Tool that comes with the Ameo. After that, everything works fine. How long does it take with your device and igo?
If I use my GNS GPS receiver (http://www.gns-gmbh.com/de/30_5843.php) I need only a few seconds until the first fix. And it supports TMC!!! I've searched a lot around to find another / cheaper solution to use TMC with the integrated GPS receiver, but I didn't find a working solution, so i decided to buy the GNS GPS receiver....
Regards
Andreas
Click to expand...
Click to collapse
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino
gigino said:
Hi Andreas,
can you confirm that the GNS 5843 TMC work on the X7500 with Igo.
Thanks
Gigino
Click to expand...
Click to collapse
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas
AndreasF said:
Yes i.e. it works on my T-Mobile (Germany) Ameo with igo,
Cheers
Andreas
Click to expand...
Click to collapse
Hey Andreas,
sorry to trouble you again but we are using the igo plus and the same gps as you the GNS 5843 but we can get the gps to work but not the TMC everytime we try to connect the TMC the pda just frezzes like the port has a conflict.
We have only been trying this in landscape mode can you tell me in which mode you are using the igo Portrait or Landscape.
Please can you help me in get this to work because I really like the Igo plus more the any anothe navigators.
Thanks
Gigino
Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas
AndreasF said:
Hi Gigino,
hmmmm, strange, for me it works. And yes, I'm using the landscape modus.
Sounds for me, that Igo uses the internal GPS receiver an tries to find a TMC connection on this internal GPS receiver.
Some Ideas from my side:
If you connect the GNS receiver via bluetooth, which serial port do you use? I've configured the bluetooth settings and then the COM-connections (I hope this are the right terms, I'm using a german ROM) with COM1 and secure connection. For instance Mobile Navigator 6 expects the TMC Signal only on COM1 and doesn't accept other ports.
The internal GPS Receiver is connected to Com4 on my system: GPS Settings -> Programms: Com4 and ->Hardware: None, 4800 Baud and -> Access: Automatic.
In a few words: internal GPS receiver on COM4, external GPS Receiver via bluetooth connected to COM1.
Do you have / use the test software from GNS to test, if youre GPS receiver is ok? You can download it on their page.
Last hint: Sometimes (Mobile Navigator6: every time!) you have to start the Navigator software twice to get a connection to the GNS 5843. It's a known bug for this receiver
Hope all this helps, otherwise contact me again
Regards Andreas
Click to expand...
Click to collapse
Hey Andreas,
thanks for your help I well try again over this weekend.
They is another problem that I have and I've tryed everything but cannot resolve it.
I use the Igo Plus in landscape mode when I'm using the map and I get a reminder or a call the screen revertes to portrait mode and after accept the call or dismissing the reminder all the buttons in the Igo software goes all funny.
Do you have the same problem or have you find a way to correct this problem.
Thanks
Gigino
Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!
adamelphick said:
Ah I have this problem if the keyboard is attached but not if it isnt. What happens is that for some wierd reason the screen gets INVERTED! If you imagine where the button should be if it were upside down you can click it! Most odd!
Click to expand...
Click to collapse
Hi,
I can confirm this also, the screen is inverted meens, that it looks ok, but you you have to touch it in an inverted way. I.e. the button is on the left upper corner of the screen, but you to click in the right lower area. Thats really strange. I've have the feeling, that this happens very often, if you use the Map view instead of the cockpit view.
@ gigino: I use the ameo with a brodit mount without the keyboard, so I don't have this problem.
In my last message is a little mistake, you have to switch OFF (and not ON) the automatic access in the GPS settings.
Regards
Andreas

GPS as dongle

Hi,
Is there any way of using the built-in GPS receiver in my Kaiser as an bluetooth GPS dongle? For example, if I wanted to run GPS software on my PC and setup the GPS unit to point to my Kaiser...?
Any Ideas?
Thanks!
hartware said:
Hi,
Is there any way of using the built-in GPS receiver in my Kaiser as an bluetooth GPS dongle? For example, if I wanted to run GPS software on my PC and setup the GPS unit to point to my Kaiser...?
Any Ideas?
Thanks!
Click to expand...
Click to collapse
http://www.wmlog.net/?p=111
Application is called GPS2Blue ... its a freeware...
Havent tried it....
you can check it out

GPS test tool for HTC S730

I've brought this GPS: http://www.techfocus.co.uk/GPS-Rece...TFSN20&tduid=9c2b6aadcc4ca8e0d3f6a72baf759c60
but can't get it to find any satellites on S730 trough Google maps or Route66 (Route66 says no GPS). If anyone has the tool or any tips, please let me know
Edit: Found the GPStool and it finds three satellites and has fairly good reception, but Route66 doesn't find it.. says there is no GPS...
try to move around
hi
set in bluetooth settings for gps receiver com# port and in the route66 (gpstool) set bluetooth GPS receiver on com#.
Drobcek28 said:
hi
set in bluetooth settings for gps receiver com# port and in the route66 set bluetooth GPS receiver on com#.
Click to expand...
Click to collapse
Thanks I had done that, but I found my mistake... I don't get to connect to any satellites where I live, so I have to drive some meters before I get any signal...
Thanks everyone
Or try this app

Has anyone tried BT or USB GPS receivers w/Athena?

Yes, the Athena has built-in GPS. But compared to other phones and stand-alone units, the GPS receiver is weak (and not sirf star). My old Palm with a wired external sirf star GPS receiver is way better - locks on in seconds from the middle of the first floor of my house.
So, has anyone here tried a bluetooth or USB GPS receiver?
Yes, I tried Holox Bluetooth GPS receiver, it works just fine and as this is 44 channels it is more powerful (It connects faster and better quality reception), I don't think you will have any problems with that, you just have to make sure that you change settings in you navigation software so that it connects the bluetooth one rather than the built in GPS receiver.
Thanks, I'm thinking of getting the Holux. That's what my wired GPS is. Then again, I might just get the 4-in-1 cable and try to use my wired Holux that I already have.
The built-in GPS failed me twice this past weekend when I really needed it, which is why I'm thinking of using an external receiver for road trips from now on.
I have the Dell BT332 (Globalsat) paired with the 7501 and it works
as well as it did with my Axim51v.
techntrek said:
Yes, the Athena has built-in GPS. But compared to other phones and stand-alone units, the GPS receiver is weak (and not sirf star). My old Palm with a wired external sirf star GPS receiver is way better - locks on in seconds from the middle of the first floor of my house.
So, has anyone here tried a bluetooth or USB GPS receiver?
Click to expand...
Click to collapse
Another device to bring with you? Let's pray that when thief steals the phone, they take both devices with them so that your WIMP could still tell you where your phone is
A BT GPS receiver would stay in the car - plug it in, pair the BT, and forget it. When I'm in the car it would automatically connect. I would still use the built-in GPS (when it works) when walking.
I could still set WIMP to use the internal GPS...
techntrek said:
A BT GPS receiver would stay in the car - plug it in, pair the BT, and forget it. When I'm in the car it would automatically connect. I would still use the built-in GPS (when it works) when walking.
I could still set WIMP to use the internal GPS...
Click to expand...
Click to collapse
You're right. I did'nt think of that.
eaglesteve said:
so that your WIMP could still tell you where your phone is
Click to expand...
Click to collapse
What is WIMP?
...
cktlcmd said:
What is WIMP?
...
Click to expand...
Click to collapse
Where Is My Phone. http://www.wimp-software.co.uk/
techntrek said:
Where Is My Phone. http://www.wimp-software.co.uk/
Click to expand...
Click to collapse
thanks. WOW. that's one piece of software.
...
cktlcmd said:
thanks. WOW. that's one piece of software.
...
Click to expand...
Click to collapse
There are also other similar products, such as the Phone Theft Alarm by Carty Studio.
An even better alternative, doing a bit more than WIMP, is spb sprite terminator. Easy to google this. I like this the most.
eaglesteve said:
There are also other similar products, such as the Phone Theft Alarm by Carty Studio.
An even better alternative, doing a bit more than WIMP, is spb sprite terminator. Easy to google this. I like this the most.
Click to expand...
Click to collapse
thanks. I'll look them up.
Err,
Sorry, it's Ultimate Theft Alert, not Phone theft alarm.

Bluetooth GPS setup for IG0 8

Due to lag problems with the internal GPS i would like to use an esternal bluetooth GPS reciever with with IGO8. I have got this to work with TT& but only have the local map for this. When I try to set up in IGO8 I can't find a settings page. Is it possible to do this or am I missing something obvious.
You have to make connection to your bluetooth GPS receiver, assign COM port and then in iGO select that COM port and speed. And it'll work ;-)
angus99 said:
Due to lag problems with the internal GPS i would like to use an esternal bluetooth GPS reciever with with IGO8. I have got this to work with TT& but only have the local map for this. When I try to set up in IGO8 I can't find a settings page. Is it possible to do this or am I missing something obvious.
Click to expand...
Click to collapse
check also settings/external GPS.

Categories

Resources