Hello,
i have searched more than one hour for a solution of my problem but i didn't found anything that can help me. So here is my problem:
Everytime when i reboot my Kaiser i will get a Carrier Bootscreen on the position where the Softwarereleases (Romversion, Radioversion, ....) will be shown. I have flashed different Cooked Roms and Splash Screens. The Logo from my provider is always here. Is it possible to remove or replace this screen with an other picture ?
Thanks for help
regards
endebe
I'm of no help, but it might help if you include what provider it is incase someone has already figured it out.
It is possible to flash custom bootloader screens to the Kaiser. Check out the post linked below.
http://forum.xda-developers.com/showthread.php?t=334907
NotATreoFan said:
It is possible to flash custom bootloader screens to the Kaiser. Check out the post linked below.
http://forum.xda-developers.com/showthread.php?t=334907
Click to expand...
Click to collapse
Hello again,
thanks for this link but i have tried this before. After the bootloader screen was flashed the provider screen is also here again. I will see short the flashed bootloader screen and after this the provider screen is upcoming. My provider is ONE from austria.
regards
endebe
In active sync, open file explorer.
look in \windows, I found an animated.gif (HTC) and a animated_KPN.gif (this is my operator)
So if I am correct you should find one like "animated_ONE.gif"
try to replace these files with a animated.gif you like
it worked for me
Hi,
same problem, same carrier!!!, wrongly I opened a new thread, sorry!
Do ou already have a solution?
kind regards
Frank
Related
thEsE files are only for the HTC WIZARD
this post is in response to the request from this thread ;http://forum.xda-developers.com/viewtopic.php?t=52521&postdays=0&postorder=asc&start=0
Upgrading only the radio or the splash and extended-rom will not wipe any setting from you device. It only updates the respective part that you are flashing.
This is a proper extended-rom[for sumiter rom wizard custom AKU 2.3 ROM but it should work with any 2xxx rom].nbf is not a folder containing the files
To install unzip the folder and run the ROMUpdateUtility_Wizard_NoID.exe
You will not lose any setting that you have in your rom. It simply updates the extended-rom.
when’d you decide to hard reset you device again the extended rom will load automatically as in the official rom , there it is .no Cingular stuff .
download my extended rom from here EXTENDED-ROM-FOR NON-CINGULAR-USERS
how to install? simply run the ROMUpdateUtility_Wizard_NoID.exe that is inside every splash screen and extended rom folder[/b]
more splashes coming soon.please post your requests and if you like my work please say thank you a least .
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
gizm0luvsu said:
shouldnt one of the versions in the boot loader screen change when doing this mine stayed the exact same
Click to expand...
Click to collapse
no it should stay the same.
Thanks !
Hi Faria,
Thanks for this handy utility. Are you still working on a kind of manual about cooking your own rom?
Nico
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
raven2000 said:
faria, thank you for your Vodafone splash screen its awesome!
I wanted to ask you is it possible to have HTC logo?
Click to expand...
Click to collapse
HTC LOGO HAS BEEN UPLOADED TO THE FIRST POST
gooshy said:
To gooshy
First you should cid unlock before doing anything using the lokiwiz tool, then flash the new rom .as for how does my extended-rom fixes the problem of the guy with the £40 bill is simple;Is phone was dialling out to get is email and because he installed the default extended-rom he has all the Cingular gprs/dialup settings to access email/web ,so is device was using the American settings to dial out from the uk to get is mail. since I have remove such settings from my extended-rom , there is no danger of any bills .
Click to expand...
Click to collapse
Thankyou faria for your response. This has put my mind at ease.
I have spotted a slight problem since updating. When I send a text message, the receiver gets the message twice. Im not sure if this is a ROM issue, a setting issue or a T-Mobile issue. Just wondered if anyone has had this problem before?
Thanks for all your work.
Cheers.
Click to expand...
Click to collapse
your problem is very rare but it is know across roms im afraid i dont know the cause.
this is a network issue, happens to me all the time sometimes i get the msg 4 times in a row lol THANK GOD FOR UNLIMITED TXT
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
update
update
I have successfully created a new test extended rom for any wizard with 2xxx rom versions regardless of the carrier.
the best thing is that this extended rom has carrier settings in it for UK/AUSTRALIA /SOUTH AFRICA/PORTUGAL/NEW ZEALAND/NORWAY/AND Nederland’s ,so wend the extended rom loads a dialog comes up and you chose the particular carrier setting that you want, after selecting it just install automatically.or you could just press cancel and no carriers setting will be isntalled but the remaining items will be.nice.
I have also manage to hack the program called [wm5torage] so now it can be installed from the extended rom ,I have also made the program 30% lighter and it works flawless
Also it has registry setting on it like; gps icon back, performance tweaks etc, etc...
At the moment imp putting a few more settings programs into it like a tiny program that actually closes the applications and it is only 4kb.
It is not ready to public release. But will be soon if anyone is interested. Are you?[/
samimayer said:
great work .. thanks
could u make it import any image into the tool?
like insert "MyOwnBestIspWhatsoeverSplashLOGO"?
Click to expand...
Click to collapse
are you talking of the htc-logo or splash screen?
both would mae me happy
the splash is the most annoying
i use the attached (changed 2 jpg for size) file
as the welcome96.png
can it work on prophet?
Orange?
/Cacti
Re: Orange?
le_cactus said:
/Cacti
Click to expand...
Click to collapse
thank you for uploading orange dump CACTI,i have converted and posted in the first post, also there is a DOPOD splash uploaded.
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
kyphur said:
100Tbps said:
How are you making these? I can't figure out which application to use to try to reverse engineer this but you seem to have this down to a science. Any help is appreciated!
Click to expand...
Click to collapse
Look here:
http://forum.xda-developers.com/viewtopic.php?t=52564
Be careful, read everything. If you're not careful you can brick your phone easy.
Click to expand...
Click to collapse
kyphur is correct 1 wrong move and you have a dead device. the reason that it is difficult to do a tutorial on how to cook roms is because you need to mess with several tool/programs/encode/decode/convert flash,etc,etc.etc...there is not a simple straightforward way of doing it, my Wizard is only 2 months old and have learn to cook roms unlock simply by reading the xda,also a lot has been guess work and brain power because no one is prepared to help you kill you device .at the moment I m very busy but I plan to write a tutorial in how to cook your extended rom.
in another note there is 2 new splashes uploaded
Hello. I was flashed my Wizard,but I have a general problem. When I try to start Windows, always start Align Screen, but Windows didn't start. I reflash my pocket, but the situation is a same. I think that I'm lost my BootLoader on PDA and the Wizard is unrepaired. I want somebody to help me, please?
bootloader
you can go into bootloader by soft reseting and holding the camera button down at the same time it will the show a multi colour screen that is bootloader mode
download your network providers official rom re flash it then is hsould bo ok
otherwise use a rom called wizard love i have seen use on many threads and it usually get people out of trouble search for it on goole
or if you have onshare i have the rom you can download my id is easymob same as the forum
http://www.onshare.com/en_gb/download/
What ROM did you flash with?
mordo said:
Hello. I was flashed my Wizard,but I have a general problem. When I try to start Windows, always start Align Screen, but Windows didn't start. I reflash my pocket, but the situation is a same. I think that I'm lost my BootLoader on PDA and the Wizard is unrepaired. I want somebody to help me, please?
Click to expand...
Click to collapse
You need to provide more details if you want help... what ROM version were you flashing? What provider? What was your IPL/SPL?
This is a beginner's mis conception. I was having the same problem. Eventually I found out that I need to keep holding the stylus on the screen for at least 6-8 seconds. Then the pointer will start moving. So it was not "tapping".
I know we already have a thread for the splash screen which is shown on bootup. Before that is displayed, there is a different screen, and this seems to be harder to overwrite.
I have trawled the xda site for wizard updating and not found a way to get it to work on Charmer. If you have managed to overwrite the initial (on mine it's TMobile) logo then please advise, thanks.
Me too in the same boat. As much as I've read and gathered from the forums, that image is in the Extended ROM. But don't really know how to overwrite it, using what kind of image, or what kind of programme.
Advice, someone???
Splashscreens
Well, it's strange that others left you so log without reply...
Easy solution:
1) download http://rapidshare.com/files/30404684/splash.zip.html
2) unzip
3) create splash.bmp, 320 height 240 width
4) flash it...
enjoy.
Didn't work for me
Thanks for this. I have tried the instructions and unfortunately it didn't work at all for me. I get an error as follows:
hm, looks like error
try to run enablerapi.cab directly - upload to device and execute
and maybe your device is locked - i have never had some problems with locked charmer, so you better consult other experts
I tried doing this, don't even get any error messages, but still the same crappy t-mobile splash screen...
dunno what to do..
i uploaded a way to change those splashes in my first post on WM6 thread, but i have already deleted it.
Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.
i think that numbers appear in the original bootloader, i remember that...
Hmm, I thought the numbers first appeared after switching to Hard-SPL, but maybe I am wrong. Can anymode else remember the initial state, or has anymode send his device to HTC with the numbers shown at startup?
staubsaug said:
Hi!
I am having problems with my trinity and I need to send it to customer support, so I loaded SSPL and flashed back the original ROM as described here.
The problem is now, that at startup, red numbers still appear as shown in the attached picture. I am pretty sure that these numbers were not there before I upgraded to HardSPL and WM6 (bepe WM6 ger 0.79). When I enter the boodlader manually, it says "SSPL". What went wrong? How can I get rid of these numbers and return original device state?
PS: The reason why I need so send my trinity back to HTC is, that the device often crashes at startup or during runtime and the screen freezes with some graphical errors, which can also be seen on the attached image.
Click to expand...
Click to collapse
What numbers do you see, if you step manually to bootloader?
fktsndr said:
What numbers do you see, if you step manually to bootloader?
Click to expand...
Click to collapse
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000
agreed
Flashed the same bepe version and it shows up same screens - trying to switch to another ROM (pref. the LIT), for too many drop out issues with the german bepe 0.79 (esp. with TT6 and Dialer) but cannot even get it to run the vodafone WM5 again - due to a broken cable, as I realize now - ok, we´ll see how far the LIT will LEAD
I have an original device with WM5, not yet upgraded, and I have the same red numbers.
staubsaug said:
TRIN100
IPL-0.50
TRIN100
SPL-1-07.0000
Click to expand...
Click to collapse
Everything is ok, this is the original HTC ipl and spl!
okay, thanks! I am going so send my trinity back to htc then.
Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
Everything went well and I received a brand new trinity today.
gepino77 said:
Hey!
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
Thanx.
Click to expand...
Click to collapse
beware : read the wiki could be helpfull for your knowledge...
staubsaug said:
Everything went well and I received a brand new trinity today.
Click to expand...
Click to collapse
Good ....
I have 3 screens that appear during a boot. The 1st is now is the Nice one-from thread posted here and changed by me (via NBH flash), the 2nd screen is the "SONOFON"ugly one. The 3rd used to be "welcomehead.96.dng" which is the "windows" image-nice one,changed by me.
Please help me to remove 2nd SONOFON one mates(if you can of course).
Thanks in advance and regards.
Anyone mates??
Try the advice here: http://forum.xda-developers.com/showthread.php?t=421572
Ta
Dave
Thanks mate,but no joy,for first and third one there is solution(i found already)but second one Telenor logo is the big problem
Thanks again.
Kaiser Teaks and Shaupps Advanced Config Manager both have settings to turn off/change the startup animation(your second boot screen).
stesul411 said:
Kaiser Teaks and Shaupps Advanced Config Manager both have settings to turn off/change the startup animation(your second boot screen).
Click to expand...
Click to collapse
Already tryed mate,with no joy,awaiting for rom chiefs,maybe someone knows how.......thanks anyway mate.
The animaition should be able to be reomved by schapps (which chages the regisrty)
Sometimes some registry settings are restored by the rom (if they are stored there) though up a reboot, so to the solve the problem you may need a new rom
You are probobly talking about stwater. Try searching for ie. wm61_stwater
If you are cooking its the file in SYS\base_dpi_96_resh_240_resv_320
Can't do anything mates,just can't get a rid of this ugly Telenor's logoTrying almost everything,have reed almost all articles without any luck
Thanks for the trying to help me out mates.
cheers
Search up all images in windir and go trough them. Once you find the one you are talking about replace it whit a diffrent one. Telenor you say.. Norwegian?
This is a picture,thanks for support mate.