Line on Screen sometimes - Tilt, TyTN II, MDA Vario III General

I have a problem with my Tilts screen, on some programs I can see a line running across the screen right where the bottom bar for the softkeys is located. When I am using the camera it appears to be green, and when i open up the tab for the options it is white, its not that visible to most people but I can clearly see it, and it and it is extremely annoying I will take some pictures of it later, just wanted to know if anyone has the same problem

looks a hardware fault to me...is it happening on landscape and portrait mode?

I have problem with horizontal line on the screen only in camera (3Mpix) mode. This line apper on the taken foto. I thin it must be camera ... I hope this will be fixed soon...

I send mine back for repair, because of the horizontal and vertical lines in camera mode.

sectorlord said:
looks a hardware fault to me...is it happening on landscape and portrait mode?
Click to expand...
Click to collapse
it happens on both, the problem kinda reminds me of those old crt monitors where if you had the same thing on the screen too long it would burn in. the line is on the left side of the screen and looks exactly like the shiny part of the left softkey is.

Bouloama said:
I send mine back for repair, because of the horizontal and vertical lines in camera mode.
Click to expand...
Click to collapse
Bouloama:
Was it repaird or did you get a new one ? I now that it's diffrent in every country but how long were you left without phone ?

I'm still in the waiting, the TNT guy just picked it up. They promised me it will take 10 days max. This includes the time for sending it back to me.
So hopefully i'll get it back before 15 dec. I think they will replace my cameralens, since there is a white dead pixel on it. But who knows...

Im having the same problem.
I just received my MDA Vario III yesterday.
I installed the hardSPL and flashed with dutty's latest rom.
I also took a contacts pic of my dad, hehe.
But today, I started the camera and noticed a red line running across the cam.
So I took the picture, and checked the pic. It seemed the red line was taken with the picture. This does mean there's some hardware problem. Also, I found another topic on the internet with more people complaining about it:
Click!
I just called T-Mobile and they wouldnt help me cause the contract's on my dad's name. (A few years back when I wasn't 18 yet)
Anybody else who has experienced this problem?

i just took a pic of my monitor in low light conditions - i have a totally black screen with only the taskbar visible (light gray) i found that taking a picture in landscape mode, the night mode or some **** is causing all pixels along that line to darken (??) see this link for an example (3mp @ fine)
note: this happens in landscape mode probably because the orientation of the line of pixels is in line with the pixels of the camera (cant seem to reproduce it when the device is upright [ie the taskbar spans the 240, not the 320]) - this could either be the utterly _crap_ nightmode filter software or could be due to the ccd itself - i dont really know enough about camera technology to determine which is the cause (you think maybe the crap nightmode filter determines the gamma of horizontal lines based only on the pixels in that line? that would explain this effect and if so thats just plain ****)

My Kaiser has new camera. It took only one day to repair it. I've heard that camera in Kaiser is made by Samsung ... (it was mentioned in service report)
Now it's all ok. I wonder how long ...

Related

Screen issue-"Burnt in" image on gray backround

Hello people,
I rarely see a burnt in (like old crt screens) image on the bottom of the screen.
For example when I change the volume, the softkey labels of the today screen are still visible, along with a white line. Most times it is normal so I don't worry very much but I'm wondering if someone else has the same issue.
I've tried many versions of hardspl (because they seem to be connected with some screen issues) but the problem still exists.
Hi i have the exact same issue, i put a post up a month ago not had any response on it. I have a MDA compact IV, not updated any ROM or HARDSPL yet. I was tempted to update to see if the problem could be rectified.
Have you update to a cooked rom? I might send mine back to have it fixed if its a screen issue.
Mine only holds the "burnt in image" along the right of the screen from top right corner to bottom right corner around 3cm in.
Also i have noticed the "Burnt in image" seems to get stronger when the device heats up. If i use GPS or 3G, this seems to affect the screen.
My background is black which makes it really noticable, i think if i stick with the orginal t-mobile white background it's probably not that noticable.
mmm
Perhaps the units you bought where like demo units. Those units that are displayed all day long turned for people to look at them. I have read in another forum that perhaps that distortion is caused by extreme temperatures, cold or heat.
well i'm still trying to figure out what is causing it, as I notice it only once in maybe a week. Maybe temperature is the most probable cause. For me I notice the defect only in gray background (e.g. when changing volume or launching opera).
My unit was from the first batch from expansys (origin htc asia)
It's possible your handsets have screens which are somehow susceptible to heat damage from inside the phone. This would be no fault of your own, but a manufacturing defect.
I'd suggest returning the phone to the retailer, HTC or the operator depending on your situation.
However, if you're using the phone in extreme conditions, ie low temperatures, you may very well find the LCD slow to refresh or have some level of image retention.
Let us know the outcome
i also have a ripple effect when pressing, but its more apparent with black. its also a first gen model, so i think ima make a phone call to htc. maybe a can get a new device.
for the burn in, try this:
1. Go to power settings, deselect automatic backlight management.
2. Pull up backlight level to maximum.
3. Reselect automatic.
You should be ok!
If not, faulty device!
tnyynt said:
for the burn in, try this:
1. Go to power settings, deselect automatic backlight management.
2. Pull up backlight level to maximum.
3. Reselect automatic.
You should be ok!
If not, faulty device!
Click to expand...
Click to collapse
Ok I will try this although I can't see how the backlight can affect the screen. In order to repair it with warranty I would have to send it to expansys uk (because it is not a European device) and I bet it would take long
Have you tried removing the battery for a while - some lcd screens can get the memory effect, and cutting power for long enough normally cures it.
My phone actually holds the previous menu under the current menu.
Example i'm on the home screen, goto messages and send a text using the qwerty keyboard. Back to the home screen, i can see a very faint image of the qwerty keyboard under the Programs hotkey.
When the PIN lock comes on the bottom right is "MENU", i can see a faint "programs" letters icon underneath it.
I will try and leave the battery out for a few hours, if not a call to t-mobile!
ok, i have the same "problem". even after a soft-reset the words CommManager
and Programs are still slightly visible in the boot screen.
but: as mentioned above, turning the device off for a couple of minutes cures
this, and the screen is dark as hell again!
really seems to be some kind of memory effect!
regards,
markus
Left the battery out for a few hours, made no difference. I guess is not a software problem.
will be giving t-mobile a call tomorrow!
:-(
I guess every htc device must have a flaw...
when it does it again I will try to take a photo of it and post it here
Hi same problem here.... See my post below..
http://forum.xda-developers.com/showthread.php?t=417629
I thought it was due to Spb Shell but no, now i'm happy i'm not alone..
But what solution for this??
I'm not worried about the burn in looks.. My worry is whether this behavior of the screen will progressively damge the screen???
I have been using the Diamond at full backlight.. Last few days i've put it down to minimum, but the problem persists!!!
ok, I think it happens when it overheats.
So that is why it is caused when charging.
wtf?
No its not due to overheating, coz LCD screen are supposed to tolerate temperatures upto 80degree C... Dont know if its related to electro magnetic radiation, may be looks like it's more after i use the network...
Hi another mate has this problem Andrew...
http://forum.xda-developers.com/showthread.php?p=2684406&posted=1#post2684406
Hi,
i sent my phone back to T-Mobile hoping they will fix this issue with the screen. Just received the phone and it looks like they have done nothing On the job sheet all it says is "Software updated"? The problem is still there!
I dont think there is a fix as such, it looks like this is the cause
http://www.practical-home-theater-guide.com/image-sticking.html
I'll try if i can get a completely white background and leave the screen on for a while at the brighest setting, if this will erase the screen issue?
the problem appears more often now on my device....
It does not have to do with heat afterall.
Why would the image "stick" when the phone is off? I mean that many times I see the symptoms right after I switch the phone on.
Do we have any screen experts in the forum?
viperone88 said:
Hi,
i sent my phone back to T-Mobile hoping they will fix this issue with the screen. Just received the phone and it looks like they have done nothing On the job sheet all it says is "Software updated"? The problem is still there!
I dont think there is a fix as such, it looks like this is the cause
http://www.practical-home-theater-guide.com/image-sticking.html
I'll try if i can get a completely white background and leave the screen on for a while at the brighest setting, if this will erase the screen issue?
Click to expand...
Click to collapse
After calling up T-Mobile and made a complaint saying nothing had been done by the repair centre, they gave up and agreed to give me a handset replacement. Received the handset today, looks like a refurbed one? Anyway my problem is now fixed. Left the phone on a while and it got pretty hot, no ghosting on the screen
The restore was a pain, Wifi didn;t work, the HSDPA didn;t work. But after a few hours messing around it's all up and running so far.

[Q] display problem

Hi I have a small problem with my galaxy and I wonder if it is a common thing or is it a sporadic case. I recently took my galaxy in assistance for the replacement of the screen (between lcd and capacitive glass had a hair) Once again after a while 'I realized (I think that there is a problem from the beginning) that appeared on the display strange signs. Initially I thought it was a lcd problem then I tried to shift the LCD image and saw that signs remained fixed as if they were between display and glass. I brought the phone back in service but they said there were no defects. For sureness (they were very nice) they showed me another galaxy just out of the box and presented the same peculiarities. It seems to me (but I'm not sure) that the first galaxy that I had not had this feature.
If you want to help me try to manually set the display brightness to low and pull down the curtain of the notification bar, or choose a dark gray background and gimme an answer.
thank you
i attach a photo
anyone?
I saw that many people have downloaded the image.
thank you
Can you explain what is so peculiar about it ? I dont see anything wrong with that image . Is it the three orange color curved lines ?? (though that looks to me like a reflection of something).
Are you talking about the red haloing effect around the white text?
Apart from the orange claw 'reflection' in the top right there is nothing discernible about that image.
orange signs are camera lens reflection. I talk about grey zones of images. If you watch closely you notice that some grey pixel zones are different from other. With a kind of green blur.
thank you for your answers
Is this what you are concerning about?
http://forum.xda-developers.com/showpost.php?p=8766267&postcount=12

Green vertical line when switching off the display

Hello everybody, I have the following "visual effect". It happens roughly 50% of the times the display switches off. It doesn't matter if it is by it self, by the power button or by a software button. In the very moment when the display switches off, a greenish dot in the center of the display flicks for a split second, along with a same color vertical line trough the whole screen. Obviously it is not supposed to be this way Beside this issue, there is no other problems with the display or the phone( for now). What do you think about this? Thanks in advance
Sounds like a screen off CRT effect, check you tube to see if that is your problem
Isn't the CRT effect a horizontal white line ending up in a dot?
I genuinely think the OP's screen may be defective...
Sent from my GT-N7000 using xda app-developers app
do a lcd test and check if all pixels are working ok
Unfortunately it is not a CRT effect, although it looks a bit like it. The difference is, that the line and the dot( little spot) appear simultaneously for a fraction of a second. In a daylight it is hard to see it, even more it happens just 50% of the times, but not every other time. Its somewhat random.
The *#0*# test do not show much. No dead pixels. On blue you cant see anything, on green and red I think I see a little bit darker spot in the center of the screen( where the dot/spot appears), but there are such darker sports and elsewhere on the screen.
BTW, I noticed recently, that when the screens dims a bit shortly before switching off, this dimming happens not so smooth. How should I say it... it happens on a several steps, although the whole thing is done in less then a second, it is not so fluid. Is it supposed to be this way?
Thanks for your help guys
have u tried flashing a different rom stock
I am on the latest German stock 4.0.4, tried several others, including 2.3.6. .Currently with Hydra kernel. No difference whatsoever. I think the auto-brightness doesnt work so good. When set on fixed value it dims more fluidly.
if u on stock rom and not rooted then take it to a service center

White band on screen plus glitches

Hi, so there's a white band that suddenly appeared on the screen a couple of weeks ago about 2 inches thick and is, let's say, translucent ie a picture can still be seen beneath. It can also be seen faintly when the tablet is rebooting. Can it be a cabling issue in the screen or a problem with the screen itself or hopefully a software issue (not likely)? Thanks
There's also a glitch that appear on landscape and disappears when switching to portrait mode and vice versa on apps. Which does not appear when a screenshot is taken.
I have attached a couple of pics.. I'm guessing that it's probably a hardware issue but if there's an alternative to changing the screen, I would be glad lol.
Looks like a GPU fault to me. It may be the cabling I suppose but more likely the hardware underneath unfortunately.

Newbie Urgent help last day to return

Afternoon everyone i urgently need opinion i have a perfect black round dot that i thought was a sensor or selfie camera or notification i cant screen shot it as it goes and disappears but is is permanently there other than that films screens on black backgrounds but wierdly not on screenshots anyone know hwta it is? it doesnt look like a pixel more like a notifcation or smomething telling me i have something switched on i have attached a picture from my iPhone thanks in advance
Hey!
When you make screenshots, does the dor appear?
As I see there are 2 options:
1. (Most common) you have dead pixels. This means those pixels are literally dead, and as a consequence, black permanently. The only way tk fix is it is by replacing the screen
2. (Very rare) a software problem. In this case by some reason those pixels aren't been rendered, though this is a remote possibility, but posible. For checking, if you capture a screenshot and the dot appear, then there may be a software problem. Otherwise, the phone is rendering that black dot, but by some reason the screen isn't showing it up.
So please let me know if when capturing a screenshot you see the dot.
#mcl said:
Hey!
When you make screenshots, does the dor appear?
As I see there are 2 options:
1. (Most common) you have dead pixels. This means those pixels are literally dead, and as a consequence, black permanently. The only way tk fix is it is by replacing the screen
2. (Very rare) a software problem. In this case by some reason those pixels aren't been rendered, though this is a remote possibility, but posible. For checking, if you capture a screenshot and the dot appear, then there may be a software problem. Otherwise, the phone is rendering that black dot, but by some reason the screen isn't showing it up.
So please let me know if when capturing a screenshot you see the dot.
Click to expand...
Click to collapse
They say they can’t screenshot it. It’s a dead pixel. if the device is under warranty, use the warranty. If not, rlly nothing you can do, there are some yt vids that flash lights your screen, and that can potentially fix it.
There is a small possibility it’s a app overlay doing this, does still appear when you are in the settings app (settinsg does not show overlays unless you toggled the option in developer settings)
It appears everywhere settings videos and anywhere else.. except a screenshot if i do that it goes. normally a dead pixel is quite blurry and you can tell the burn etc etc this is a exact round dot like its a notification or sensor initially i thought it was a camera or light ambient sensor lol i may have toggled something in developer settings lol its so exact and round i thought i may have mucked around with somthing in the settings
Dead pixels don't need to be blurry. Dead pics and screen burning are different things. Dead pixels may happen by an impact to a certain region of the screen that was hard enough to kill those pixels. Maybe a shortcut as well. I don't really know. To me it seems dead pixels
#mcl said:
Dead pixels don't need to be blurry. Dead pics and screen burning are different things. Dead pixels may happen by an impact to a certain region of the screen that was hard enough to kill those pixels. Maybe a shortcut as well. I don't really know. To me it seems dead pixels
Click to expand...
Click to collapse
I wonder if anyone else’s 4xl is like it. Run the you tube fixes none worked wonder if it’s a setting

Categories

Resources