Screen Backlight.... - Tilt, TyTN II, MDA Vario III General

the screen bcklight used to stay on with my kaiser. this ment I could leave it tilted on the desk and see the time. the backlight stayed on but on the lowest setting but know the scren just goes black after a few seconds any ideas?

Related

Backlight

i searched and no luck, so here it goes,
After talking on the phone, when the screen shuts off, when i hit the red little phone icon to end the call, the screen goes bright again, but as soon as i hit the o.k. button the screen goes dim, i have to hit the stand-by button on the side and hit it again for the screen to go back to bright.. Anybody know how to fix this or is there a way so that the screen stays bright all the time?
Disable the screen shutdown during phone calls. I believe kaiser tweak has that option[its a sticky. Make sure u pay close attention to All tilt-specific questions too...]

Display stays on after midnight wake-up

Hi,
it's hard to believe no one asked this before but I could not found anything about this..
My Diamond (as probably every wm phone) wakes up at midnight.. but because I'm loading the battery over night it does not switch off the display completely but stays dimmed until i switch it off manally.. because it lays right next to my bed I really hate it doing that.
So is there a possibility to switch the display completly off during loading? I have the windows configuration the way that it should switch off the display after 1min in ac-mode.
Thanks in advance,
Michael
"My Diamond (as probably every wm phone) wakes up at midnight.. but because I'm loading the battery over night it does not switch off the display completely but stays dimmed until i switch it off manally.. because it lays right next to my bed I really hate it doing that.
So is there a possibility to switch the display completly off during loading? I have the windows configuration the way that it should switch off the display after 1min in ac-mode."
I'm having the exact same issue with my HTC FUZE.Wakes up, then stays in a dimmed mode until I put it back to sleep. Anyone have any ideas?
Thanks
TJ
jus go to settings/power and change the setting of the backlight to turn backlight off after 5min on external power!!!
azharsunny said:
jus go to settings/power and change the setting of the backlight to turn backlight off after 5min on external power!!!
Click to expand...
Click to collapse
The phone settings are set for backlight off after 1 minute (on external power). Once the phone wakes up, it stays on (in a dim mode) until I physically press the power button to put it back in the standby mode.
Why does it wake up at midnight?
Is it because you have installed a program that restarts it automatically?
i've noticed my diamond wakes up at midnight, feels like it doesn't go off, but does after a few minutes, all the buttons light up as well as if i a txt is about to come on, but the screen come on, i've only noticed it as i've been up late recently and i have the diamond on front of me on hy desk, my old orbit phone (which i keep meaning to sell) doesn't do it, so i can't see it being a wm bug
Weird.. My Diamond doesnt wake up at midnight
stead said:
i've noticed my diamond wakes up at midnight, feels like it doesn't go off, but does after a few minutes, all the buttons light up as well as if i a txt is about to come on, but the screen come on, i've only noticed it as i've been up late recently and i have the diamond on front of me on hy desk, my old orbit phone (which i keep meaning to sell) doesn't do it, so i can't see it being a wm bug
Click to expand...
Click to collapse
Do you (or in the past) have G-Alarm installed. This fixes a windows alarm clock bug. It switches on at midnight to do some sort of maintenance. I have found my phone no longer stays on as you describe, but I always run the latest version of g-alarm
BTW - get your orbit on ebay. I did a buy it now auction and got £150 for my Orbit a few months ago
No More Issues
I have since flashed my ROM to the NATF 4.5 and I have no more issues with the phone coming on at midnight.
Mine used to do that too, the screen would come on and the clock also switches back to the big clock which I hate. After installing galarm it went away but the clock still switches to the big clock and I have to switch it back every morning.
My Topaz also wakes up at midnight and it feels like it won´t shut off! How long should this session last to reorganize all the things? G-Alarm is installed and since then I had this issue.
I could deactivate the midnight wakeup, but I don´t think this is recommend!? Is it?

LCD burn in (image persistence)

Hey all,
I am having troubles with the LCD on my touch diamond, i have had it for quite a while now.
In January this year, I started to notice that the soft button bar at the bottom of the screen was flickering, just the soft bar. I would turn off the screen for about half a day and it would go away, then it would happen again in a few days.
This happened for a few weeks, then it just stopped.
Now its back again, where I can see "Now Playing" faintly, as well as what is actually there ("Contacts"), but i don't have WMP open. and the whole bar flickers slightly. i just have to turn the screen of for a minute and it dissapears.
I only had WMP open for about 5 minutes..
I have the same issue. Here's what I did to (temporarily, I assume) fix the problem.
I made a white picture in MS Paint that was 640x480 pixels and put it on my phone, then set the screen to maximum brightness and left the screen on with that picture full screen. It got rid of the burnt in image.
I think the problem I had is that in my power settings, I had it to where the screen never turns off when plugged in. If I got a text message or e-mail after I plugged it in and went to bed, the screen would turn on and never turn off until morning. I've changed my power settings so even when plugged in, it doesn't stay on for more than a minute. I hope that fixes it.
mafiamike said:
I have the same issue. Here's what I did to (temporarily, I assume) fix the problem.
I made a white picture in MS Paint that was 640x480 pixels and put it on my phone, then set the screen to maximum brightness and left the screen on with that picture full screen. It got rid of the burnt in image.
I think the problem I had is that in my power settings, I had it to where the screen never turns off when plugged in. If I got a text message or e-mail after I plugged it in and went to bed, the screen would turn on and never turn off until morning. I've changed my power settings so even when plugged in, it doesn't stay on for more than a minute. I hope that fixes it.
Click to expand...
Click to collapse
I too have the same problem and i did what you said but its not working, Any other suggestion....
same here... i removed the battery for 4 hours (at night) . got up and everything went back to normal . happen once a few months ago .
i would try it tonight and see and will report back. AND i have also found another issue with my diamond of newtons ring. Now am really getting pised at htc pathetic quality phone
I'm experiencing the same problem as well.. it come and goes and I've somehow learnt to ignore it. So far it just disappears after a few hours of use.
Hey its thr with many people, A quick remedy. Increase the brightness level to max....wait fr a few seconds thn put it back to normal. Wont prevent it permanently...but yes will hold it off for a while
Happens to my Diamond too. I am now trying different versions of HSPL to see if the problem is related to it.

Screen doesn't turn on anymore

Hello,
my phone just fell off my bed (maybe 30cm) and it stil lseems to be operating because my spotify keeps playing but the screen just stays black. Nothing i can't see anything. tried to power off and on - it gives feedback but screen stays black.
Screen seems fine no scratches or anything... did something similar already happen? lol
i could see the notification LED turn red for like 3 seconds

Honor 9 lite screen dimming and flickering

Whenever i use my phone, its screen brightness dims (Adaptive brightness is OFF) and when i pressure the top right part of the screen the screen gets normal for a while. I've tried to get it fixed from service center 2 times but the problem comes back after few weeks. I've also found out that if i press the top-left part of the screen, it dims the screen brightness. Can someone tell me what the problem is.. Is it some loose wiring or is it damaged display?

Categories

Resources