activsync 0x80830003 error - Tilt, TyTN II, MDA Vario III General

Hopefully someone can help me. I have posted several times and no seems to respond. I might just change my name to the invisible man. I have looked through these forums and googled (on the web) for an answer. I flashed Dutty's latest Tilt rom and now I cannot connect to my server over the air through Activsync. I get a 0x80830003 error. I got this once before flashing an older version of Dutty's rom, but was able to fix it by unchecking the proxy connection. I have tried everything, including the cabs to disable hidden proxies and several other cabs provisioning the phone for ATT. Nothing has worked. Everything works and I can sync via USB, but just not over the air. I have two conections, Cingular GPRS (wap.cingular) and My ISP GPRS (isp.cingular). I can connect to the internet, but just not to my corporate server. Any ideas? Thanks,

i had the same thing. I just changed the internet network to MediaNet and unchecked the proxy server requirement and it started working again.

activesync error 80072f78
I upgraded to dutty's 6.1
I can sync to desktop by usb and to exchange by internet, but I can't sync to exchange by usb and get error message 80072f78 -
any solutions

martin2242 said:
I upgraded to dutty's 6.1
I can sync to desktop by usb and to exchange by internet, but I can't sync to exchange by usb and get error message 80072f78 -
any solutions
Click to expand...
Click to collapse
Is there even a REMOTE chance that you googled the error?
http://blogs.technet.com/petergal/archive/2006/05/08/427614.aspx
Did you try ID-RUNNER's fix?
Bill

activesync error 80072f78
yes I googled the error several times and tried a few forums. Thanks for your suggestion but I'm afraid it didn't work?!
Help...

Worked
Had the same issue as ptgptg. Id-runner's fix worked. Thanks.

Related

Activesync 4.0 and WM5

Been playing with Activesync and WM5 now for over 4 hours.
My findings are the following.
1) I have seem to have lost the partnership and only way to get it back was to flash the device again and create a new one.
2) I have seem to be able to establish a partnership as a Guest.
3) after refalshing I made a new parnership and connected, added my contacts and started to sync, well it started to look for changes and that was it.
4) My device gives network card gives me a Unable to obatin ip error and I have worked with both the Use Secific Ip and server asgined Ip.
So now I get the feeling that you cant sync with WM5 and outlook 2003 configured with a pst file.
Can anybody confirm that they have been able to download there contacts out of outlook (not server based)?
What is the trick for the network card set up on the device and the windows based mobile device network card on the desktop.
PS Yes I have XP SP2
I can confirm that it works. I did nothing special, it almost worked from the beginning. One thing, that it seems Outlook MUST be your default e-mail client when building a new partnership.
Activesync 4.0.0 b4343
Outllok 2003 (11.5608.5656)
Mamaich's patched wm5 rom + fixes
I also have no problems with outlook 2003 and AS4. Firewall or some other program can block the connection.
But I've setuped ActiveSync to sync directly with exchange server.
mamaich said:
I also have no problems with outlook 2003 and AS4. Firewall or some other program can block the connection.
But I've setuped ActiveSync to sync directly with exchange server.
Click to expand...
Click to collapse
Good for u that u have an exchange srvr
Thanks for the feedback.
At this moment in time I will forget the Outlook sync and work on the connection to the device.
1) When I installed AS4 and attached my 1.40 device I was able to browse the device (and hence load the partion application).
2) When I upgraded to WM5 I have been unable to connect and if I can I can only get a conection as guest.
What do I see.
1) On connection for cradel a new network card is installed on my desktop, its is the "windows moble device" , configured to auto and since it finds no DHCP isntall an APIPA address and acts as a DHCP
2) On whatching the device in the network connections "Remote-Ndis-Host" Set to Auto I see under the IP address a mac address and then a APIA address which seems to be the same as the DHCP on the Desktop.
(Cant remember when I saw it).
So the device sometimes shows me connected (seen by the arrows at the top) sometimes comes up with Can't get an address. However the desktop AS4 is still connecting.
Seems that I have a conflict in the AIPA which should not be the case as that is not what it was built for.
I will try fix IP on both sides and bridging the netsworks, also turn off the firewall.
Find it hard to belive that I could see the device with AS4 and rom 1.40 and now cant with WM5.
Oh sorry, I actually forgot to turn off the fire wall. Everything is ok after I did that....
WM5 and AS4.0 are working seamlessly.......
I Had the same problem, after installing WM5 on both my XDA & XDAiis my ohone wouldnt connect to my desktop. I have AS4 installed on my notebook and that works fine. (it looks like the proble happens only on the PC used for installing WM).
I suggest removing AS4 and re-installing it.
Good luck
Well I will be dammed.
I turned off my firewall PC-cillin Internet Security 2005 on the computer that installed the rom and bingo.
So the firewall worked ok with the AS4 and 1.40 but not after upgrade WM5. Must be something new in the WM5 rom. The device says its connected the desktop only says its trying to connect.
Here are a few more things that I tried
Installed AS4 on my multi boot Laptop XPSp2 Partiion, had Windows firewall enabled all default settings, saw device and paired (did not have office so could only explorer device). And it worked
On Laptop XPSp2 partition were I installed WM5 and was able to connect to device with AS4 and rom 1.40 before the upgrade: I gave Device a fix Ip and Wireless Network connection on Laptop a fixed IP in a different network. Could ping both from PC but not connect with AS4. Tried to bridge the two networks (not that it was need) but did not help. Tried the same segement with fixed IP and still no luck.
Reinstalled AS4 many a time, reflashed it also many a time and still could not connect.
Well that was Fun... NOT
Hi @ all, when I'm trying to install AS4 on my Computer, I get the following error:
"Setup not complete. The wizard was interrupted before Microsoft ActiveSync 4.0 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again. Click Finish to exit the wizard."
I've tryed it on my computer and on my mobile computer. Both have a legal Windows XP with SP2 and all current updates from WindowsUpdate.
I can't find a conclusion, maybe someone can help me
Hi,
same problems as MDAIIIUser here.
I tried AS 4.0 on 2 different Notebooks and 1 Desktop PC. No problems with WM2003. Best result I was able to get was on a Notebook with XP Pro SP2. I could explore the device but no syncing anything.
The other 2 PS´s weren´t able to connect at all.
Any ideas ?
Greetz from Germany
TOM
Well my problem is that my active sync takes ages to sync the contact and calender. Well i do have 900+ contacts but with WM2003SE that used to take a couple of minutes. Can someone enlighten on this.
Thanks.
Hemant.
The answer is that unfortunately the Persistent Storage (Flash Memory) although a benefit in so much as it will stop you from losing all your data in the event of a battery drain is also 10x slower than RAM. This is where the database resides for Pocket Outlook and you will see the speed difference when doing large file operations such as this.
Don't panic too much as after the first sync it will probably not make a great difference to normal syncs which will only update a few items each time.
There are some great links for stuff on Persistent Storage over at buzz's site ->Here<-
Bebbo,
Thanks for ur reply. The thing is that even my first sync hasnt finished yet and it takes a lot of hours to sync each one. Anyway i am trying to finish this weekend.
Thanks.
Is there a possibility that as4 cannot sync contacts with outlook2002?
Because I just can sync files and media. Most important things like contacts,
calender, task etc. don't work. Am I the only one with this problem?
Same problem as told by MDAIIIuser
Dear MDA-IIIuser I am facing same problems as you have written in your letter.
I Tried to give IP address manually it did not work.
Desperately, I tried to reinstall Active Sync 3.8; it did not detect my PPC.
I was able to synchronize my contacts....every time when I hard reset but after that nothing,,,,,,,,
although the Icon of LAN card showing incoming and outgoing data it remains in the phase of "connecting".
I tried to bridge to LAN card, it did not work.
If you will get any solution please let us know..
Thanks..
Well I amanaged to sysnc my contacts and my problem was my own firewall PC-Cllin 2005 which I needed to turn off.
Fire wall??
I am using Zone Alarm Pro, I was thinking on this line....I turned of (I turned off the windows fire wall also)...but problem remain same
shall I uninstall Zone alarm and see the responses??????????? :? :?
Well I checked my device with AS4 XP2 with Firewall (its default) and I could see my device, I did not sync as I had no office on it.
I was able to see the device with AS4 and Rom 1.40 so some thing is different with WM5.
Anything to do with ports must be off, also make sure you are connected direct.
Try it for what its worth!
I am also having this problem. I have assigned my PPC to obtain a server assigned IP address since i am syncing with two device. Every time it syncs it gives me an error that the server couldnt assign IP. Any luck on that.
Also all those people having problems where your computer is not syncing outlook entries, here i what you can try to do. Open your Outlook 2003 and then click tools and then click detect and repair. Once it is finished you will see that it can sync your outlook entries now. I hope this helps.
This is because your outlook 2003 has to be the default mail client or it wont sync your entries. Again of the dirty tricks of M$. :roll:
Hi Guys,
I have a rather odd problem. I am using a WinXP SP1 laptop along with Norton Internet Secruity 2005.
I just purchased a jasjar and installed the activesync 4.0 program that came on the CD. When i begin to synchronise, i get the following message:
"You will only be able to sychronise files, folder and other non-Outlook items right now. If you want to synchronise email, calendar, notes, tasks, contacts, please disconnect the device, install and run Outlook and then synchronise again". Well the funny thing is outlook is already running and used to work fine with my PDA2k.
Outlook is my default client for all of the above. I even tried disabling the firewall, still no luck. Can you guys help me out here, its really bugging the hell outta me.
Appreciate any input.
Best Regards,
UD.

[HELP] Cant connect to internet using Active Sync

Just upgraded to TuMa 1.3. Problem with Active Sync has been resolved. And theres another problem, cant connect to the internet through active sync (with cradle). Will someone help me with this. Thx alot..
I have the same problem. I have imate Jam with WWE Rom. After I installed mobile operator's settings file on clubimate.com, active sync recognizes the device and show inside but doesnt provide internet to the system?
I have Zone Alarm on Pc but, it was working very well before. I tried it without this firewall and even uninstall-reinstall Active Sync 4.1 but nothing has changed. I even deleted all the settings that this operator's software that I download on club imate does but no change again...
Seems that there will be setting change on magician, not on pc..
Any suggestion?
Let check the connection settings in ActiveSync. (menu File). Set the value of "this computer is connected to" dialog to "The Internet".
I have solved my same problems by this way.
Experienced the same, it was actually a firewall issue.
Resolved mine (Norton Insternet Security) through:
http://www.microsoft.com/windowsmobile/help/activesync/norton.mspx
For other firewalls or other possible solutions have a look at:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Cheers,
I tried both solutions above and also format my imate. But it is inconsistent. Sometimes conencts, sometimes does not.
I tried both solutions above and also format my imate. But it is inconsistent. Sometimes conencts, sometimes does not.

Kaiser/Tilt won't connect to internet through PC

I have tried everything over the last two weeks:
disable/enable proxy
AllowLSP registry entry
firewall settings
home and work networks
wired and wireless connections
and I still cannot get the WM6 device to connect to the internet through my XP PC when it is connected via activesync.
Does someone have the silver bullet perfect solultion?
dgelfuso said:
I have tried everything over the last two weeks:
disable/enable proxy
AllowLSP registry entry
firewall settings
home and work networks
wired and wireless connections
and I still cannot get the WM6 device to connect to the internet through my XP PC when it is connected via activesync.
Does someone have the silver bullet perfect solultion?
Click to expand...
Click to collapse
yes,
i installed Dutty's Rom and that fixed the dillema, before i was not able to fix it, didn't matter what i tried.
I've been unable to solve this as well on my stock Tilt. I'm not really thrilled about flashing a new rom (I'd no doubt brick the little bugger).
It would be nice to know what's blocking the connect, though.
If you're AT&T you need to run the disable proxy cab to connect to internet usin A/Sync.
....and three seconds later, that worked (I've been tinkering around all moring trying to solve that).
Thanks a ton Gsleon3!
Finally! It is hard to type as I jump up and down. The remove proxy cab worked!
So now the question, what doesn't work when the proxy is removed? Looks like at&t video and medianet pages don't work and weather on the HTC home screen.
On my Kaiser the remove proxy cab didn't work..What else can I do to use my xp's internet connection?
where to find the cab file?
Can anyone tell me where to find the disable proxy cab file? I've been searching on the forum but i can't seem to find it.
thx
dutty's threads have it.. a collection of cabs
i have the opposite problem - i want my tilt to NOT connect through the PC and to use MediaNET instead (because we block streaming media at work)
however i find that when the phone is usb connected to my PC i get no internet at all.
can anyone advise?
nevermind - searched and found solution to my problem
http://forum.xda-developers.com/showpost.php?p=1655348&postcount=8
Speed
Can you guys post and let me know what kind of speeds you guys are getting through ics ?

activesync error 80072f78

I upgraded to dutty's 6.1
I can sync to desktop by usb and to exchange by internet, but I can't sync to exchange by usb and get error message 80072f78 -
any solutions
not trying to be rude or anything, but googling that error code came up with a wealth of info.
i know...
Thanks for answering;
I tried a) deleting proxy server - didn't work b) registry change - didn't work c) changing activ sync connection to internet from automatic - didn't work
It's stupid because I can sync to exchange via internet (just not via usb) so it's not a big deal - just annoying
I'm kind of stuck - more suggestions welcome
Heelppp - please
Are you running 4.5? Try uninstalling and reinstalling activesync.
If not, try this.
0x80072f78 but not the same circumstances
Hi
Hi
I tried searching for this error 0x80072f78 message and I don't seem to get this message under the same conditions listed in the posts that I've found. I am getting the message at random in PIE with either GPRS/3G or when connected by USB. I have no problems downloading mail but can't use anything else for data (google maps etc). It doesn't happen every time but is very spotty. ATT tech support was no help as usual. I applied the registry change in the posts that discuss this error in relation to USB/active sync only and it did nothing. I'm using the latest att rom.
Any suggestions would be welcome. I've followed all of the suggestions that I can for people that are having the problem with active sync only and that has done nothing. I still have the problem when connected to gprs/3g. I have yet to find someone else posting that has this problem with both.
Thanks
Well add me to that list then. A user I provide support for has an unmodified Hermes (yes I know this is the Kaiser forum) that was exhibiting this behaviour over the air. (But was fine over USB.)
It turned out that he had a proxy server configured on his 3G/GPRS internet connection (with T-Mobile) but that setting was no longer appropriate, due to changes made at the T-Mobile end. Switched off the proxy server setting and all was well again.
Rob Pomeroy said:
Well add me to that list then. A user I provide support for has an unmodified Hermes (yes I know this is the Kaiser forum) that was exhibiting this behaviour over the air. (But was fine over USB.)
It turned out that he had a proxy server configured on his 3G/GPRS internet connection (with T-Mobile) but that setting was no longer appropriate, due to changes made at the T-Mobile end. Switched off the proxy server setting and all was well again.
Click to expand...
Click to collapse
Thank the Lord for search functions - was having this exact issue and it was driving me NUTS! Anyway if you are having trouble syncing over gprs but not over USB then this is the fix! Thanks
Tasks Exchange
I get this error when tasks on my exchange (mail2web.com) account is active and my tasks on my AT&T Tilt is active. When I deactivate (options) the exchange tasks and the phone tasks, then activate only the phone tasks the error goes away.
Ciao

SSL Broken?

My Diamond (MDA Compact IV) has recently (last few days) decided that it won't make any SSL-enabled TCP/IP connections.
Most obviously, HTTPS websites won't work. Opera quits when I try to load one, IE gives "unknown error 0x80072f78". Also, neither of my email accounts sync anymore (one Hotmail, so probably HTTPS, but the other is IMAP with SSL).
The same thing happens when connected by GPRS, HSDPA or Wifi.
I am currently running the "Shaks.P v4.00" (WWE) ROM, but I seem to remember something similar happening with T-Mobile's ROM before I reflashed.
Googling for the error has been fruitless, it seems that both ActiveSync and Windows Update (desktop) use the same error code to mean something different.
Anybody else encountered this issue? Any ideas for a fix?

Categories

Resources