I upgraded to dutty's 6.1
I can sync to desktop by usb and to exchange by internet, but I can't sync to exchange by usb and get error message 80072f78 -
any solutions
not trying to be rude or anything, but googling that error code came up with a wealth of info.
i know...
Thanks for answering;
I tried a) deleting proxy server - didn't work b) registry change - didn't work c) changing activ sync connection to internet from automatic - didn't work
It's stupid because I can sync to exchange via internet (just not via usb) so it's not a big deal - just annoying
I'm kind of stuck - more suggestions welcome
Heelppp - please
Are you running 4.5? Try uninstalling and reinstalling activesync.
If not, try this.
0x80072f78 but not the same circumstances
Hi
Hi
I tried searching for this error 0x80072f78 message and I don't seem to get this message under the same conditions listed in the posts that I've found. I am getting the message at random in PIE with either GPRS/3G or when connected by USB. I have no problems downloading mail but can't use anything else for data (google maps etc). It doesn't happen every time but is very spotty. ATT tech support was no help as usual. I applied the registry change in the posts that discuss this error in relation to USB/active sync only and it did nothing. I'm using the latest att rom.
Any suggestions would be welcome. I've followed all of the suggestions that I can for people that are having the problem with active sync only and that has done nothing. I still have the problem when connected to gprs/3g. I have yet to find someone else posting that has this problem with both.
Thanks
Well add me to that list then. A user I provide support for has an unmodified Hermes (yes I know this is the Kaiser forum) that was exhibiting this behaviour over the air. (But was fine over USB.)
It turned out that he had a proxy server configured on his 3G/GPRS internet connection (with T-Mobile) but that setting was no longer appropriate, due to changes made at the T-Mobile end. Switched off the proxy server setting and all was well again.
Rob Pomeroy said:
Well add me to that list then. A user I provide support for has an unmodified Hermes (yes I know this is the Kaiser forum) that was exhibiting this behaviour over the air. (But was fine over USB.)
It turned out that he had a proxy server configured on his 3G/GPRS internet connection (with T-Mobile) but that setting was no longer appropriate, due to changes made at the T-Mobile end. Switched off the proxy server setting and all was well again.
Click to expand...
Click to collapse
Thank the Lord for search functions - was having this exact issue and it was driving me NUTS! Anyway if you are having trouble syncing over gprs but not over USB then this is the fix! Thanks
Tasks Exchange
I get this error when tasks on my exchange (mail2web.com) account is active and my tasks on my AT&T Tilt is active. When I deactivate (options) the exchange tasks and the phone tasks, then activate only the phone tasks the error goes away.
Ciao
Related
Just upgraded to TuMa 1.3. Problem with Active Sync has been resolved. And theres another problem, cant connect to the internet through active sync (with cradle). Will someone help me with this. Thx alot..
I have the same problem. I have imate Jam with WWE Rom. After I installed mobile operator's settings file on clubimate.com, active sync recognizes the device and show inside but doesnt provide internet to the system?
I have Zone Alarm on Pc but, it was working very well before. I tried it without this firewall and even uninstall-reinstall Active Sync 4.1 but nothing has changed. I even deleted all the settings that this operator's software that I download on club imate does but no change again...
Seems that there will be setting change on magician, not on pc..
Any suggestion?
Let check the connection settings in ActiveSync. (menu File). Set the value of "this computer is connected to" dialog to "The Internet".
I have solved my same problems by this way.
Experienced the same, it was actually a firewall issue.
Resolved mine (Norton Insternet Security) through:
http://www.microsoft.com/windowsmobile/help/activesync/norton.mspx
For other firewalls or other possible solutions have a look at:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Cheers,
I tried both solutions above and also format my imate. But it is inconsistent. Sometimes conencts, sometimes does not.
I tried both solutions above and also format my imate. But it is inconsistent. Sometimes conencts, sometimes does not.
Hopefully someone can help me. I have posted several times and no seems to respond. I might just change my name to the invisible man. I have looked through these forums and googled (on the web) for an answer. I flashed Dutty's latest Tilt rom and now I cannot connect to my server over the air through Activsync. I get a 0x80830003 error. I got this once before flashing an older version of Dutty's rom, but was able to fix it by unchecking the proxy connection. I have tried everything, including the cabs to disable hidden proxies and several other cabs provisioning the phone for ATT. Nothing has worked. Everything works and I can sync via USB, but just not over the air. I have two conections, Cingular GPRS (wap.cingular) and My ISP GPRS (isp.cingular). I can connect to the internet, but just not to my corporate server. Any ideas? Thanks,
i had the same thing. I just changed the internet network to MediaNet and unchecked the proxy server requirement and it started working again.
activesync error 80072f78
I upgraded to dutty's 6.1
I can sync to desktop by usb and to exchange by internet, but I can't sync to exchange by usb and get error message 80072f78 -
any solutions
martin2242 said:
I upgraded to dutty's 6.1
I can sync to desktop by usb and to exchange by internet, but I can't sync to exchange by usb and get error message 80072f78 -
any solutions
Click to expand...
Click to collapse
Is there even a REMOTE chance that you googled the error?
http://blogs.technet.com/petergal/archive/2006/05/08/427614.aspx
Did you try ID-RUNNER's fix?
Bill
activesync error 80072f78
yes I googled the error several times and tried a few forums. Thanks for your suggestion but I'm afraid it didn't work?!
Help...
Worked
Had the same issue as ptgptg. Id-runner's fix worked. Thanks.
I am using Activesync 4.5.0 (Build 5096) on my WinXP laptop to sync the AT&T Tilt with my laptop and outlook exchange. I have no problem with Activesync over the cellular network or wifi, but when I connect the USB and it automatically launches Activesync on the laptop, I see this error on the PC side. Looks like it is able to sync everything except the Outlook data. I looked for this error code on Microsoft site, but I don't see much details about this error code. I have installed additional SSL certificates to see if that resolves the issue, but it didn't. I have had this issue from Day-1.
It is not an issue as long as I am in USA where I have cellular data service to get the emails/appointments/contacts into my phone over the cellular network. However, when I travel, I don't plan to pay for the exhorbitant roaming charges and so would like to use the USB link to sync the info.
Has anyone else faced this problem? Is there a solution?
I heard they had wifi overseas, too. Supposedly its not that exhorbitant, and possibly more convenient than keeping a laptop with you at all times to sync your PIM stuff.
I do carry a travel router with me everywhere with my laptop while on travel to create an instant wifi access point. However, if I am sitting in one of our offices and have a LAN connection to my laptop, I don't see why I can't get my USB connection to work. I am sure there are others who need to sync up Outlook while the phone is connected to the laptop for charging purpose.
Saw this on a site, might want to check it out:
http://devnote.stokemaster.com/2008/02/activesync-45-supportcode-85020006-and.html
" Support Code:80072f7d
Fixes:
Note that this involves registry changes so be careful with it.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
This site has the registry file that you can double click and modify.
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
This disables the Layered Service Provider (LSP) that use the Windows TCP/IP stack. "
Don't know if that will work,but worth a try.
Make sure to export your original reg key first so if it doesn't help you can always change it back.
Alemaker
I tried the registry addition on the phone just now and then rebooted the phone. But, it didn't help. I have seen this discussion on pdaphone forum, but it is not clear whether it should be done on the phone or the PC side. Chris Herrera's site is also not very clear about it. The file has a .reg extension. Does the extension indicate where it should be run? I manually added the parameter on the phone.
hmm,
good question, and searching both my Vista laptop and my Tilt registry, didn't even come up with that key, but it may be making a new key.
If it didn't work on the phone,try the pc, and if it that doesn't help, was worth a shot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
The last suggestion fixed it for me.
The funny part is that this is a problem only on my work laptop. At home I have no issues.
Thanks
worked for me too
...but it didn't work with dutty's...using RynCpprV6 at the moment.
I think it is something to do with my work PC..
Just want to chime in and say this fixed the activesync error 80072f7d for me too!
(added HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\"AllowLSP"=dword:00000000, didn't reboot, and File/Connection Settings within ActiveSync changed from "Auto" to "The Internet")
Another thumbs up. Works a treat. Didn't even need to reboot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
Click to expand...
Click to collapse
Worked like a charm - thank you, kind sir!
Thank You!
Another fine service provided by the xda-developers forum! Problem solved!
Ditto!
Another fine service provided by the xda-developers forum! Problem solved!
Just wanted to chime in and say that this worked on my Rhodium too! Thanks Kaiser users!
Activesync error 80072F7D on Toshiba TG01 comes up when try to sync Toshiba TG01 with company's Exchange server
Solution;
Start>>Settings>>Connections>>USB to PC>>Uncheck box: "Enable advanced network functionality".
Sync'd up fine right after.
Hi all, I have a problem with BB Connect on my TyTN II. I have BES and everything is working fine in the past.
I reinstalled the OS to my PDA over the weekend and reinstalled BB Connect & then I cannot send/receive emails. First I installed the cooked roms, and changed the AKU value to .0.4.2 (also tried .0.4.4). Then I reverted back to the factory ROM, and still have the same problem.
The little icon at the bottom right hand corner of the screen shows 4 blue circles, which indicates the BB Services is connected.
Also, on the BB Connect settings, under Status, it says connected. In the Identity Tab, PIN, IMEI, & IP Address are all ok. But under email settings, the box is blank and it says "Email Settings Unavailable". Also under the Services tab, I can only see 3 services, Blackberry Internet browsing service, IPPP for BIBS & Provisioning.
This problem is weird because the Status is Connected, but somehow is not getting the email settings from the Blackberry server.
My company's IT is dealing with the operator's helpdesk and they are CLUELESS!!
I have tried to fix this by hardreset many times & installed many different ROM, and still cannot fix it (even when I revert back to the original ROM I used to have).
Pls can anyone help?
I have never provisioned a bbconnect device ota but always using activesync and the blackberry connect desktop.
Hi, sorry but I dont understand what you are trying to say?
et-perth said:
Hi all, I have a problem with BB Connect on my TyTN II. I have BES and everything is working fine in the past.
I reinstalled the OS to my PDA over the weekend and reinstalled BB Connect & then I cannot send/receive emails. First I installed the cooked roms, and changed the AKU value to .0.4.2 (also tried .0.4.4). Then I reverted back to the factory ROM, and still have the same problem.
The little icon at the bottom right hand corner of the screen shows 4 blue circles, which indicates the BB Services is connected.
Also, on the BB Connect settings, under Status, it says connected. In the Identity Tab, PIN, IMEI, & IP Address are all ok. But under email settings, the box is blank and it says "Email Settings Unavailable". Also under the Services tab, I can only see 3 services, Blackberry Internet browsing service, IPPP for BIBS & Provisioning.
This problem is weird because the Status is Connected, but somehow is not getting the email settings from the Blackberry server.
My company's IT is dealing with the operator's helpdesk and they are CLUELESS!!
I have tried to fix this by hardreset many times & installed many different ROM, and still cannot fix it (even when I revert back to the original ROM I used to have).
Pls can anyone help?
Click to expand...
Click to collapse
I also had this a few times and our BES admin found that each time I had this problem my BES-account was ****ed up. The only way we got this working again was by re-creating the account on the bes server.
I'm not sure it's exactly the same in your situation but it sounds like. So maybe you want to give that one a try.
cheers
Sorry, I was a little too concise.
If you reinstalled as you said, then you have lost the original provisioning. For BES, you will have to install the Blackberry Connect desktop on a pc that has access to your exchange account that also has activesync installed also. You then connect the device to the pc and then provision it. As the previous replyer said, you may want to recreate the account on the BES server.
Again, afaik you cannot provision a bbc device ota for bes.
I will bet a dollar that you haven't properly sync'ed using the BB Desktop Connect.
Make sure that Outlook is running, start up BDC and "Configure Wireless".
If you do not, your phone doesn't have the settings to connect to your server. It can connect to the outside world, but then doesn't know where to go from there.
Hi all, thanks for the post, really appreciate it. I was searching a few days to try to find the answers.
I have asked my company to reset my activation to fix it, but tomorrow may try to get my IT to install the active sync & bbc connect desktop software. He was refusing to install it on my PC today.
Again, thanks and really appreciate the comments!!
My Diamond (MDA Compact IV) has recently (last few days) decided that it won't make any SSL-enabled TCP/IP connections.
Most obviously, HTTPS websites won't work. Opera quits when I try to load one, IE gives "unknown error 0x80072f78". Also, neither of my email accounts sync anymore (one Hotmail, so probably HTTPS, but the other is IMAP with SSL).
The same thing happens when connected by GPRS, HSDPA or Wifi.
I am currently running the "Shaks.P v4.00" (WWE) ROM, but I seem to remember something similar happening with T-Mobile's ROM before I reflashed.
Googling for the error has been fruitless, it seems that both ActiveSync and Windows Update (desktop) use the same error code to mean something different.
Anybody else encountered this issue? Any ideas for a fix?