When I tried to upgrade my BA it erases the whole rom and would not respond please help
Help! Stylus screen won't align
Hi forum members. I reinstalled my ROM yesterday and my PDA was working well. This morning, I got up to realise that I could not use the tap screen. I performed a hard reset and presently, I'm stocked on the screen alignment section. The target will respond if I tapped elsewhere on the screen, but when I hit on the real target point, it doesn't respond-no matter how firmly I press. Please, I need some advice on what to do.
Sincerely,
Collins
reinstall the the old Rom of your device. If it's alway present, make sure that problem come from hardware(touch screen system failure)
Related
Recently Tried To Load New Rom Onto A Very Notchy Xda Exec - Upgrade Seemed To Go Smootly But On Completion After Resseting Device The Screen Booted Up To Show Multi Coloured Pixels Red Green And Blue " Looks Like Colured Sand" - If I Press Soft Keys And Reset The Device Prompts "press Zero To Restore Press X To Exit"
I Have Tried Both Options And Still The Screen Remains The Same - "coloured Sand".
I Have No Idea If This Is The Bootloader Mode Or What Any Pointers Greatly Appreciated
Thanks Ohmlogic.
ohmlogic said:
Recently Tried To Load New Rom Onto A Very Notchy Xda Exec - Upgrade Seemed To Go Smootly But On Completion After Resseting Device The Screen Booted Up To Show Multi Coloured Pixels Red Green And Blue " Looks Like Colured Sand" - If I Press Soft Keys And Reset The Device Prompts "press Zero To Restore Press X To Exit"
I Have Tried Both Options And Still The Screen Remains The Same - "coloured Sand".
I Have No Idea If This Is The Bootloader Mode Or What Any Pointers Greatly Appreciated
Thanks Ohmlogic.
Click to expand...
Click to collapse
This is the bootloader screen and this really isn't the right forum for this question. You need to do some reading and you should be able to get your phone back up and running.
To get you started have a look at these threads:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
http://forum.xda-developers.com/showthread.php?t=263116
http://forum.xda-developers.com/showthread.php?t=284292
Been reading and trying. How about a step by step guide esp for those who haven't a clue in the first place and are by no means technical?
If you are by no means technical and have no clue YOU SHOULDN'T BE TRYING TO FLASH YOUR PHONE.
Helpful
As a senior member of this site rather than making asinine comments when YOUR help is being asked for, should you not at least try and give a semblance of help and information or is this subject thread beyond your “expertise”?
Exec Stuck After Upgrade Help If U Can
--------------------------------------------------------------------------------
Recently Tried To Load New Rom Onto A Very Notchy Xda Exec - Upgrade Seemed To Go Smootly But On Completion After Resseting Device The Screen Booted Up To Show Multi Coloured Pixels Red Green And Blue " Looks Like Colured Sand" - If I Press Soft Keys And Reset The Device Prompts "press Zero To Restore Press X To Exit"
I Have Tried Both Options And Still The Screen Remains The Same - "coloured Sand".
Considering that I followed the instructions religiously to upgrade to the latest ROM, and resulted in the error as the original person who posted here had, I would just like to get it back to orig settings and forget the upgrade! I normally like to keep things on the latest versions but in this case I regret it.
Shemhazai said:
As a senior member of this site rather than making asinine comments when YOUR help is being asked for, should you not at least try and give a semblance of help and information or is this subject thread beyond your “expertise”?
Click to expand...
Click to collapse
No... trying to help people who don't understand of have the willingness to seek out their own answer simply creates more and more problems.
Hello. I was flashed my Wizard,but I have a general problem. When I try to start Windows, always start Align Screen, but Windows didn't start. I reflash my pocket, but the situation is a same. I think that I'm lost my BootLoader on PDA and the Wizard is unrepaired. I want somebody to help me, please?
bootloader
you can go into bootloader by soft reseting and holding the camera button down at the same time it will the show a multi colour screen that is bootloader mode
download your network providers official rom re flash it then is hsould bo ok
otherwise use a rom called wizard love i have seen use on many threads and it usually get people out of trouble search for it on goole
or if you have onshare i have the rom you can download my id is easymob same as the forum
http://www.onshare.com/en_gb/download/
What ROM did you flash with?
mordo said:
Hello. I was flashed my Wizard,but I have a general problem. When I try to start Windows, always start Align Screen, but Windows didn't start. I reflash my pocket, but the situation is a same. I think that I'm lost my BootLoader on PDA and the Wizard is unrepaired. I want somebody to help me, please?
Click to expand...
Click to collapse
You need to provide more details if you want help... what ROM version were you flashing? What provider? What was your IPL/SPL?
This is a beginner's mis conception. I was having the same problem. Eventually I found out that I need to keep holding the stylus on the screen for at least 6-8 seconds. Then the pointer will start moving. So it was not "tapping".
hi if anyone can help thatll be greatly appreciated. I just bought an att tilt 8925, and well this is what happens. it boots up and goes into windows screen and then as soon as it goes into the main screen it vibrates a whole bunch of times and then just shuts down. can't get it to active sync to reflash because it wont stay on after it goes into the main screen any help would be appreciated!
Where did you buy this Tilt? Did this happen straight out of the box or have you already flashed it?
Search on how to manually get into boot loader and re flash; http://forum.xda-developers.com/showthread.php?t=383904
i bought it like that. the phone is in great condition. all features seem to work but i think the guy did a hackjob on the rom so it's not working right and im all new to trying to get it to work.
Since it's new... start with some baseline work.
1. Do a hard reset.
2. Record ROM and radio versions
3. If it comes up... consider loading the ROM of your choice.
I see you're new here so PLEASE read my signature.
Thanks,
Your best bet would be, download the OEM official Tilt ROM, Manually get into boot loader, then flash it. There are also other methods of flashing such as from your Sd card. The previous mentioned link has allot of answers.
okay i just tried entering bootloader but it wont get into the screen. i hold the camera buton and hold the soft reset button at the bottom of th phone but it just boots up normally. anything im doing wrong?
My Kaiser has entered the three-colour boot screen by itself twice. It happened the first time after I did a soft reset, and I didn't know what to do to solve it, but on attempting a ROM flash, it reset itself back to normal with all my information intact.
Now, it has gone into the bootloader again, without me having done anything at all - I just pulled it out of my pocket to use it, and there was the coloured screen again. This time I've made multiple attempts to clear it, using both the method above (no joy at all, just endless error messages) and MTTY, which won't connect properly at all.
I'm really anxious about this - I can't get the thing to come out of it however hard I try, and I really don't know what to do. I'm worried it's become a brick.
Lee
PrimitivePerson said:
My Kaiser has entered the three-colour boot screen by itself twice. It happened the first time after I did a soft reset, and I didn't know what to do to solve it, but on attempting a ROM flash, it reset itself back to normal with all my information intact.
Now, it has gone into the bootloader again, without me having done anything at all - I just pulled it out of my pocket to use it, and there was the coloured screen again. This time I've made multiple attempts to clear it, using both the method above (no joy at all, just endless error messages) and MTTY, which won't connect properly at all.
I'm really anxious about this - I can't get the thing to come out of it however hard I try, and I really don't know what to do. I'm worried it's become a brick.
Lee
Click to expand...
Click to collapse
See my guide here: http://forum.xda-developers.com/showthread.php?t=423486
Please post any more info in that thread.
ta
Dave
Please Follow Dave's Advice.
Thread Closed
Hi all,
My HTC can not boot, it boots and stays for ever on the 1st screen with the three red text/nubmers, I think the ROM version.
Even when I try to shut it down, I can't. Only if I remove my batt.
I do not care if I lose any data as I use it for GPS Navi and 2ndary phone.
So if I do a hard rest it may work?
How can I install any new ROM?
Thank you!
Please use the search before posting "stuck at splash screen" sure would provide results, hard-reset and if doesn't work get the phone into bootloader and flash stock ROM.
All info can be found in WIKI.