Related
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I can assure you that PIE in WM6 opens http:// addresses too. I haven't tried connecting through GPRS, though. Only WiFi.
Maybe it's a DNS problem?
Hi Risidoro,
which WM6 are you using? I use the PDAVIET3 and I had the same issue with
the PDAVIET1.
DNS sounds good but it worked on the previous roms and I use the same settings as before. Maybe there is some registry entry in the PDAVIET causing
this phenomena!?
Thanks for helping!
im using the Original WM6 rom and im not having 1 problem.. maybe is PDAVIET3 rom.. i have been using PIE on Wifi and GPRS and it always connects
I'm using the BigBrother's rom AKA clean wm6 and i've no problem so far. IE works as always...that is: BAD (but at least it opens http)!
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean
I do use pdaviet3 and have no problem opening http pages with GPRS in IE.
risidoro said:
The best browser for WM, the real usable one, is Picsel Browser.
It can't be bought online (picsel only sells it to device manufacturers) but... WM6 couldn't be bought too... if you know what i mean
Click to expand...
Click to collapse
Well, I searched for it and found it, will try it, Thanks....
vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....
Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post
vijovame said:
Is a little weird, but is very good, just don't like how to zoom the pages, I use PIE plus in desktop mode....
Click to expand...
Click to collapse
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye
risidoro said:
Double clic and move the stylus up or down. It's all explained in the first page that's shown when you start the program.
bye
Click to expand...
Click to collapse
Thanks for the tip Risidoro! This really is a GREAT browser!
vijovame said:
Well, I searched for it and found it, will try it, Thanks....
Click to expand...
Click to collapse
any hints as to where to search for it? ive been searching for an hour now and no luck... it seems like a really cool program from all the stuff ive read though lol
FREIMAURER said:
Hi everybody,
I had a problem with my WM6 when I tried to surf via GPRS. The connection went fine but the requested pages would not load. After a lot of posting and research I found out that the pocket IE included in the WM6 rom only opens
url's when they start like this:
wsp://www.google.com
This is a real pain in the a** because when you click a search result in google it'll link ya to an http://... site and the problem starts again!
I live in germany and I use the O2 WAP Flatrate and up until the WM6 rom I had no issue.
Does anybody have a fix for this maybe a registry tweak that tells the pocket IE to behave as in the previous rom's?
I know a few of you out there got the same problem and I hope this thread will help us enjoy this great rom because everything else is just perfect for my needs!
Thank you and I am looking forward to your suggestions!
Cheers
FREIMAURER
Click to expand...
Click to collapse
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you
deviusdragger said:
Here check your registry and see if it looks anything like this. My browser was acting up and saying that invalid url. so i fixed the settings and now everything works awesome on it. heres the thread http://forum.xda-developers.com/showthread.php?t=291580 . its the last post
Click to expand...
Click to collapse
Hi deviusdragger,
tried your help but to no avail. The PDAVIET 3 really has different settings but changing them and rebooting did not really fix the problem.
The keys you are mentioning are only under HKLM did you also change yours there or do you have them under HKCU as well?
Thanks a lot anyway for your help!
shamus said:
I think you have bad gprs connection settings, as you wrote you can only open through wsp:// it means you are connecting to WAP service where only connection to internet is through APN (Access Point Name) so you have to use wsp (wireless session protocol). I'm assuming you set up your connections using some cab file, don't you? Go to Settings/Connections/Connections/Manage existing connections and check how many connections you have there if it's only one than it's for shure connection through WAP APN and you have to change it to normal internet connection if there are more than one connections check the proper settings for internet instead 'auto pick' if any of this does't work make your own settings as I can see for German O2 you have to only put APN name 'internet' and nothing else no passwd or login. Hope this info helps you
Click to expand...
Click to collapse
Hi shamus,
thank you for your reply! No I do not use a cab I perform the settings manually. There is more to it than entering a APN, here is all I do and how
it is documented in the depths of the german O2 website
modem: CELLULAR LINE GPRS
APN: wap.viaginterkom.de
USER/PASSWORD/DOMAIN: empty
PROXY: 195.182.114.52
HTTP: 195.182.114.52:8080
WAP: 195.182.114.52:9201
SECURE WAP: 195.182.114.52:9203
SOCKS: empty
Only by entering these informations I am surfing on the O2 wap flatrate and
by entering the proxy like this I can surf to http sites as well!!!
And exactly this feature seems to have been taken from me
Well not really as I can enter wsp://... I am still able to surf but using
google and hitting search results gets really anoying cause for every search result I will have to change the url from http to wsp !!!!
So if somebody out there might really have the antidote for my prob I'd
be most happy and if not I´ll consider switching back to Farias rom as this
WM6 stuff is only for evaluation
Thanks for helping!
Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.
shamus said:
Hmmm seems it's good lead. When your connection is through proxy server in this case 195.182.114.52 then you have to have all connection setup in "my work network" disable "My ISP" in connections/advanced/select networks by choosing only "My work network" in both fields then setup Proxy server and setup only HTTP proxy remember 8080 port, left all other protocols empty (wap, socks, secure wap). Try if it works, if not than try to setup WAP proxy to 8080 port also. Since browser connects all the time to wap apn in this way you can trick it. Other unusual possibility is your provider stoped to serve http proxy or changed some settings.
Click to expand...
Click to collapse
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off
FREIMAURER said:
Hi shamus,
tried all of your ideas but still it did not resolve this issue! I always choose "My work network" because the ISP does not let me set up the proxy.
My provider still features this service because if I use any of the normal WM5 roms everything works perfectly!
Thanks for helping!
PS: this is really starting to pi** me off
Click to expand...
Click to collapse
Hey FREIMAURER....we met in another thread......
I had a similar problem...you may have to flash your factory rom just to get your provider network settings. Flash back to your current rom and then use that cab file to set your device up so that your carrier's settings show up in Connections. At this point you can modify the wap address and your proxy settings. This will get you on the internet.
MMS is another beast!
PDAviet3 does not include MMS....you have to install ArcSoft MMS for it to show up on your device. I recommend you install ArcSoft MMS before you install your carrier's settings cab because your carrier settings include MMS configurations but once they are installed...you can not change them. If your MMS works, you're good. If it doesn't, un-install ArcSoft MMS, re-install ArcSoft MMS and manually input your settings.
Sounds like alot of hard work but it's not that bad.
PM me if you need help
Cingular settings
Cingular settings CAB files can be found here:
http://forum.xda-developers.com/showthread.php?t=292245
5th post down
What happened....did everyone give up..?!?!
Has anyone been able to get onto AT&T's (Cingular's) Streaming video site with their unlocked TyTN II here in the States?
http://cingularvideo.cingular.com/
It does not detect the phone as a 3D phone, or so it says.
I had no problems getting to the http://device.home/ page though.
I just get a blank, white screen.
doesn't work for me either... Same error. Not a 3G phone.
-Mc
isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
This link has a 8525.cab that allows you to get technical difficulties (for me at least, i don't have wireless.cingular.com:80 set as proxy)
http://www.gadgetech.info/treo/hacks/registry/
shogunmarks cab with realplayer could be your huckleberry too
http://forum.xda-developers.com/showpost.php?p=1095177&postcount=51
doesn't work for me either.
zetajunkie said:
isn't there a reg hack where you trick the the CV side into thinking you have a Samsung Blackjack, which is a supported device?
Click to expand...
Click to collapse
I dont remember the exact change (been a while) but yeah look in the Hermes forum....also you will find MANY threads so look for the newer ones as ATT and WM6 went through stages of what works for this. It is a PIE issue.
Read into the first dozen posts or so:
I don't live in a 3G area so I can't test...
http://forum.xda-developers.com/showthread.php?t=282651
-Mc
I got it too work, no problem. Below are my instructions.
TyTN II Users
Here are the instructions for access MediaNet and Cingular Video, or just about any at&t/Cingular link just like on the Tilt.
It’s really simple to access MediaNet. Even on at&t branded phones you have to switch from My ISP to MediaNet so you can access the MN home page or Cingular video. Here is how you do it.
Go to START, SETTINGS and select CONNECTIONS.
In the connections, select CONNECTIONS Icon.
At the bottom, select ADVANCED tab.
You will see a SELECT NETWORKS option.
Under Network Management, change the first option for MY ISP to MEDIANET.
Now click ok and reselect TASK (bottom left tab). Now your Connections now say MediaNet with a proxy option below it. We need to verify the proxy info is correct.
Select edit my proxy server, then select Advanced. You will see a window with server/proxy info. The first one is HTTP. It should have the following (wireless.cingular.com:80). If it doesn’t, select HTTP and enter the info. Now check SOCKS. It should have (LOCALHOST:1080). Again, enter it if needed.
Now you’re done. You only had to do this one time. When you done with MediaNet, all you do is switch back to MY ISP for normal surfing.
Before you continue, you have to make a change in your registry so that the proxy knows your phone as a branded phone. I choose the Tilt for this.
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0
This is what is listed for the Tilt
Save your settings and that’s it. By changing that info on my TyTN II, I am now able to access Cingular Video and MediaNet home page. I had to change my connection from My ISP to MediaNet so it would go through the Proxy.
I can now access my account information and a bunch of other areas I wasn't before on my TyTN II.
Cv http://cingularvideo.cingular.com
MN http://device.home
Note: In order to play the videos, you can download a PocketPC version of Real Player since the files are in RM format.
Does your HTTP setting stay?
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet. I went back to the http setting and learned the http setting to wireless.cingular.com is not there anymore. Looks like it doesn't want to stay there.
I changed my registry to make it think I am using an AT&T Tilt instead of the HTC TyTN II.
Can anyone help?
Got It Working
I only had to do this on my HTC ADVANTAGE...
If you know how to use a registry editor, then look for this entry on you phone.
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="HTC_TyTN_II Mozilla/4.0"
You need to change the CustomBase to HTC-8900/1.2 Mozilla/4.0
MEdia Net Proxy info
I believe that the proxy info for the MEdia Net as ISP is hard coded into the ROM as it was for the Hermes.
So all you would really need to do is revise the "model" info for PIE in the registry to what they said earlier.
Do you need to do something to get RealPlayer to stream the video? I'm able to get to the video pages, but when I try to play them, they download instead (wow, there goes all my RAM!)
I did find that this only works in IE, my Opera browser still gives the error page for Cingular Video.
Read what I posted here. http://www.mobileplanet.com/ft.aspx?k=99281
When you select a video to play, it downloads a video.ram file, which contains nothing but a URL. Real Video opens this video.ram file, reads the internet URL, and then plays the video from that URL.
Note: Each time you select a video from the web site, it'll download and overwrite the last video.ram file you downloaded/saved.
Okay, changing the network settings on RP seems to have fixed it.Thanks for the great guide!
victorcho said:
Whenever I set the http to wireless.cingular.com I can then get to the CV but then after a while the screen says it cannot connect to the internet.
Click to expand...
Click to collapse
Check your e-mail accounts. POP/IMAP accounts allow you to set the connection they will use. If they don't match "Media Net" and go out to check e-mail, you'll get this error because the mail doesn't think the network's available.
There's also a setting in RealPlayer to specify the network that I had to manually change. Once I did all that, I was watching The Colbert Report clips on my phone.
ha im an idiot i was getting the temp difficluties screen but i was connected to wifi took it off and im fine that was dumb but i just tried a video and got failed to connect! lol well ill see if i did somethign else dumb lol
switched the real player settings to mn and were all good
That fix worked for me! I am able to surf/check e-mail while using the MediaNet connection - is there any real need to switch connections all the time? It seems about as fast as my non-proxy connections, but perhaps it isn't.
i can get the list of videos playingm, but when i click on it to watch it, it says " can not connect" real player......how can i change this
any still having problems with real player here u go
Go to ur tmp-file folder (normally "C:\Documents and Settings\%username%\Local Settings\Temp\"
u will find quite a lot of folders in there, but if u search (f3) for files ending with *.cab there will pop one file named:
"realplayer.cab" ^^
copy it to ur ppc by using active sync
this worked for me hope for u too
I have tried all of these things and it still tells me the clip is unplayable.
Hi,
I've got a french V1615 by sfr and an "illimythics" data plan.
I try to connect with palringo (http://www.palringo.com/)
but the connection is impossible.
I try to change the registery settings :
HKEY_CURRENT_USER/Software/Parlingo/Settings
"Connection/Proxy/Host" : 195.115.25.129
"Connection/Proxy/Port" : 8080
"Connection/Proxy/Type" : 1
but i still got the " connection loop " problem.
Do i have to change the user agent ?
Opera mini works fine
thanks in advance for you'r help
ben
Hi there,
I think you shouldnt set "type" to 1 (it means HTTPS)
Which I don't think is correct for SFR Proxy
Give it a try with type=0, and let us know how it works.
(comment based on http://forum.palringo.com/archive/index.php/t-64.html)
You may also find these (currently undocumented) registry settings useful:
Connection/Proxy/Host - The hostname for your proxy server
Connection/Proxy/Port - The port for your proxy server
Connection/Proxy/Type - 1 for HTTPS proxy
(all settings have string type)
This will allow Palringo to tunnel it's traffic through an HTTPS/SSL proxy.
--
re. The password: this will be obscured in future versions. Note, however that the settings are stored in HKCU, which by default is not accessible to other users of a shared system
Click to expand...
Click to collapse
thanks
It works now just by switching from 1 to 0.
gtalk is working like a charm
thanks again
sebbes said:
Hi there,
I think you shouldnt set "type" to 1 (it means HTTPS)
Which I don't think is correct for SFR Proxy
Give it a try with type=0, and let us know how it works.
(comment based on http://forum.palringo.com/archive/index.php/t-64.html)
Click to expand...
Click to collapse
I'm sorry to bump this topic again, but i need some help!
I'm using a limited connection as the one you've mentioned, it's an Orange network in Israel.
I use this proxy : 192.118.11.56:8080
Unfortunately this trick and registry change didn't work. I always get the "Reconnect pending" message.
I also tried to change the value of the proxy type to "0" as sebbes suggested, but nothing :S
I think that this WAP proxy is HTTP and not a secured HTTPS one. Can this be the reason for not working?
I'd like to hear suggestions on how to make this work.
Thanks!!!
my version of parlingo doesnt have those registry keys dunno why can u tell me what version do u have or can u post it
mahd-leb said:
my version of parlingo doesnt have those registry keys dunno why can u tell me what version do u have or can u post it
Click to expand...
Click to collapse
You have to add the values manually
Hi,
I think (better I hope) I have found a solution for the "HTC looses HTTP proxy settings for WiFi connections". Probably you have already noticed, that the HTTP proxy setting for a WiFi connection (e.g. configured using "Work" connection setup) is lost after closing and reopening the connection configuration dialog.
During my investigations I found, that the registry snapshots, shortly taken after entering the proxy and after reopening the configuration settings again, were nearly identical. There was no clue, that the configuration program itself reversed the settings, so there was a high feasibility, that the problem is either the entry or the re-read into/out of the registry.
The problem seems to be, that the configuration program does enter the proxy setup in a wrong format. Whereas the "type" parameter should be set to "1" (HTTP) the configuration setup sets this to "0" (null proxy).
So in order to reverse this one has to change the registry (e.g. using PHMRegedit) by performing the following procedure:
1) Go to
HKLM\Comm\ConnMgr\Providers\{EF097F4C-DC4B-4c98-8FF6-AEF805DC0E8E}
2) Locate your proxy setup (key starts with HTTP-{xxxxxxx})
3) Change the "type" value to "1"
For PocketIE the parameter "EnableAutoDetect" in HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings (Note: There is no space in the key, don't know, why this forum inserts one) should be either not there (default) or set to 1.
Please double check and let me know. Keep in mind, that your settings may get lost, every time you tamper with the connection configuration program. Probably somebody could provide an OMA Provisioning CAB (_Setup.xml with CM_ProxyEntries and stuff).
EDIT: CAB attached. The contained _Setup.xml connects WORK (SrcID) with WiFi (DestId) using the specified proxy. Taylor it to your needs. Don't forget to "makecab /D COMPRESS=OFF _setup.xml ProxyOn.cab" (Note: COMPRESS=OFF) and ActiveSync it to your device. Tap it to "install". Save the cab for other uses.
EDIT II: Registry key fixed...sorry....
Regards
Neil
i hope this works, ill give it a go when i have time.
It works - great.
Thank you
Andre
I tried the proposed solution, using the .cab file and also by hand, without success.
My regietry key defining the proxy has type=1, but still does not connect...
Sorry, It works when conneting through activesync, but not through wifi.
Does anybody know where is the "intelligence" that decides which connection to use? Is it in the registry?
You have to ensure:
a) Your WiFi board connects to Work, not to Internet
b) Both connection setups must point to Work
The providec cab connects Wifi with Work and configures the proxy.
Hi, neil,
Thanks for the quick response. I did check that the card points to Work, and both connection set ups point to my work network. When editing the connections, I can see that the proxy is well defined. If I enter the registry, I can also see the proxy definition and "enable=1", "type=1". But still PIE hangs in "locating..."
Now, I run the .cab file with wifi "on"...
Probably something is wrong with your proxy. Fortunately I have a transparent proxy up and running. 141.39.43.185 port 8080. Try it. I'll see you
BTW: Sometimes a softreset does make wonders...
Regards
Ah, and don't forget: Whenever you open your devices proxy configuration and closes it again, the proxy config is messed up again by HTC.
Regards
Will try and provide feedback, but, What do you mean by try the transparent proxy? Shoul i define that proxy?
I din know about soft resets. I have even done a hard reset so I am now traying with a fresh registry... Have not ASed yet. But I wonder, Is there a key in the registry that defines which are the correct connections? Or is it all done via SrcId and DestId?
One more thing. I tried to change the proxy definition in your cab file. Extracted the setup, changed it and winrared it back... but this new cab will not install. My proxy is 192.168.0.254:8080...
Sorry for beeing not specific enough: Yes, please define that proxy. Transparent was meant in the sense of "does nothing than transfer back and forth"
Concerning repacking: Use makecab not rar. And don't compress.
SrcID and DestID makes the thing. This GUIDs haven't changed since the very first version of WM
Regards
Tryied my own cab file and worked... only once. It's lost again. Soft reset and will recheck. Thanks for the support
I can not make it connect anymore.
I run the cab file without success. What should the sequence be?
1.- set both connections to "my work network"
2.- open PIE
3.- run the cab file?
In Mobile 6.1 the settings stays but PIE doesn't use the the proxy configuration for some reason.
I'm experimenting with this. Making progress. But I'm still having some difficulty.
I think my Socks proxy port is not getting set right. I'll post back how it is going, but does anyone have thought about the Socks?
[EDIT]
Well, I had hooked up once (or maybe it was reading cache).
Anyway, I'm not having luck. It looks like the settings are right.
One thing I do notice, is that the WAP one, the Type is 2, and the Socks the type is 4, if that makes any difference. But the type for the HTTP one is 1, and the setting for IE looks correct to.
ewingr said:
I'm experimenting with this. Making progress. But I'm still having some difficulty.
I think my Socks proxy port is not getting set right. I'll post back how it is going, but does anyone have thought about the Socks?
[EDIT]
Well, I had hooked up once (or maybe it was reading cache).
Anyway, I'm not having luck. It looks like the settings are right.
One thing I do notice, is that the WAP one, the Type is 2, and the Socks the type is 4, if that makes any difference. But the type for the HTTP one is 1, and the setting for IE looks correct to.
Click to expand...
Click to collapse
With the downloaded cab, extract the file (may use winrar), change it to your liking and makecab again (no compression).
neil.young said:
Hi,
I think (better I hope) I have found a solution for the "HTC looses HTTP proxy settings for WiFi connections". Probably you have already noticed, that the HTTP proxy setting for a WiFi connection (e.g. configured using "Work" connection setup) is lost after closing and reopening the connection configuration dialog.
During my investigations I found, that the registry snapshots, shortly taken after entering the proxy and after reopening the configuration settings again, were nearly identical. There was no clue, that the configuration program itself reversed the settings, so there was a high feasibility, that the problem is either the entry or the re-read into/out of the registry.
The problem seems to be, that the configuration program does enter the proxy setup in a wrong format. Whereas the "type" parameter should be set to "1" (HTTP) the configuration setup sets this to "0" (null proxy).
So in order to reverse this one has to change the registry (e.g. using PHMRegedit) by performing the following procedure:
1) Go to
HKLM\Comm\ConnMgr\Providers\{EF097F4C-DC4B-4c98-8FF6-AEF805DC0E8E}
2) Locate your proxy setup (key starts with HTTP-{xxxxxxx})
3) Change the "type" value to "1"
For PocketIE the parameter "EnableAutoDetect" in HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings (Note: There is no space in the key, don't know, why this forum inserts one) should be either not there (default) or set to 1.
Please double check and let me know. Keep in mind, that your settings may get lost, every time you tamper with the connection configuration program. Probably somebody could provide an OMA Provisioning CAB (_Setup.xml with CM_ProxyEntries and stuff).
EDIT: CAB attached. The contained _Setup.xml connects WORK (SrcID) with WiFi (DestId) using the specified proxy. Taylor it to your needs. Don't forget to "makecab /D COMPRESS=OFF _setup.xml ProxyOn.cab" (Note: COMPRESS=OFF) and ActiveSync it to your device. Tap it to "install". Save the cab for other uses.
EDIT II: Registry key fixed...sorry....
Regards
Neil
Click to expand...
Click to collapse
Hi, Neil
Have you noticed the key "Modified"? If no wifi network is selected, this key seems to be "0", but when a wifi network is connected, it changes to "1"...
javes said:
With the downloaded cab, extract the file (may use winrar), change it to your liking and makecab again (no compression).
Click to expand...
Click to collapse
Hi Javes
That is what I'm doing. The only mod I made to the file was I changed the Proxy address to the DNS name of our proxy here at work.
What I"m finding is that the key is going in with Type set to 0, even though the XML file has 1 in it.
I'm also noticing that there is another HTTP characteristic with my Proxy (I'm guessing likely from setting in Conn Manager, with my Proxy, and a type of 0, so I have manually set both it and the one added by XML to a type of 1.
After that, still does not connect. I soft reset, and they are back to 0.
So, I went into Connection manager, and deleted references to Proxy,and turned off Proxy, and ran DClicked the Proxy cab again. The settings went in with 1, doesn't connect, and I get a popup that says "Cannot connect with current connectin settings"
So, I soft reset again, and it's back to 0.
So I went into connections, set Proxy to ON, but no proxy settings. Ran the XML file, still no connection.
I think I have a gremlin that won't let mu connect on the public at work. Interestingly, one day a copule weeks ago I was successful connecting...until a soft reset later that day. I had set EVERY item with my work Proxy: HTTP, WAP, SOCKS, and SECURE WAP.
ewingr,
I am no expert at all and have no solutions. Like you, I followed the original instructions about the cab file, with results similar to yours. I've been able to connect on two different occasions, but these connections only last for a minute. After this minute, connection is impossible for me, with resets, re-cabs and the lot. Lets wait until someone more knowledgeable drives us to success...
In the meanwhile, I will keep trying different things.
So I got this HTC HERO yesterday from this guy.
I had a hard time getting it to switch/activate to my account on Metro.
Seems the MSL was reset and 000000 wasn't working.
Used CDMA workshop to find out what it had changed to, set it to 000000. Then I was able to edit the MDN MSID and get the phone to work and update PRL via *228.
But Data didn't work.
I used the universal root, used clockwork app to flash amon_ra recovery, made a backup.
And before I got a chance to edit the previous users' gmail/market info, he changed his password, so I couldn't find a way to change that. I used recovery to factory reset/wipe the phone and went through the set up wizard.
Data still doesn't work.
I flashed the Cricket/metropcs mms/web fix, but the phone has stock 1.5 on it, so that didn't make a difference. I am getting an error 67 now though.
Just tried to flash damage control, but it froze at the X animation after a long while or animating..
Just restored back up.
Anyone care to throw a dog a bone, I need some links/threads any help to get this working again.
thanks,.
-CC
http://forum.xda-developers.com/showthread.php?t=647249&page=2
page about switching phone from Sprint to PagePlus (Verizon) you will get the error 67 unless you are using sprint so diregard that, I dont know if these settings would work for you...but worth a shot right?
quick look up for info:
mmsc string: mms.metropcs.net/mmsc:3128
hahah sweet here ya go my man
Remove your MicroSD card and plug the phone into your PC via USB cable then open QPST (QPST Configuration, then go to Start Clients and select Service Programming) and then read the phone.
Once you read the phone, go to the m.ip tab and change from mobile ip to simple ip. Then look at the first 2 user profiles under m.ip open each one up and change the Nai to [email protected], for both standard and tethered...
remove any ip address that you find in these 2 profiles. and remove any other profiles except the first 2.
also make sure both of them say enabled.
Now go to ppp config tab...
look at the tabs that say um and an... under these 2 tabs,, the user id should be [email protected] tethered id should be the same,, password is metropcs in lowercase on both tabs, remove any dns ip address you find in either tab also. just make sure all ip address are blank.
once you are completed with this make sure you write to the phone and move on to the next step..
Step 2.
click on phone icon (on the phone)
click on the dialer..
enter ##3282#
click user name
click edit
enter your spc which should already be 000000 by now
Here are the settings:
User Name "[email protected]"
SPI MN-HA "1234"
SPI MN-AAA "1234"
M Home Address "000.000.000.000"
Prim Ha Ip "255.255.255.255"
Sec Ha Ip "255.255.255.255"
Rev Tunneling "Off"
AAA Password "metropcs"
HA Password "metropcs"
click done and allow the phone to reboot...
Step 3.
Now do ##3282# again.. this time go to browser
click edit
enter spc
youll see gateway1 and gateway2, under both of these
you will see primary and secondary,,, set primary and secondary ip`s for both gateways to 010.223.002.004,, they will all be the same ip address,, and set the Port 3128 and secure Port 443 for all gatways to ,, hit done and reboot.
Also this should work on quite a few other Sprint phones,,
This is what I do for a living at the wireless company I work for,, and so far it has worked on Samsung upstage, Instinct,, Sanyo katana, and many others,,,
all that info is from a page linked from howardforums.. heres the offical link: http://www.howardforums.com/showthr...nstinct-Web-WAP-Settings-(working-100-)?pp=15
Step 3.
Now do ##3282# again.. this time go to browser
click edit
enter spc
youll see gateway1 and gateway2, under both of these
you will see primary and secondary,,, set primary and secondary ip`s for both gateways to 010.223.002.004,, they will all be the same ip address,, and set the Port 3128 and secure Port 443 for all gatways to ,, hit done and reboot.
Cool thanks, this is the only thing different from other guides I have followed. Appreciate your time and help.
I've seen people running phones on Metro without rooting or custom roms, so I know it's all got to be in the phone's settings, once it's been houdini "flashed" (esn added to metro's database).. That's how this phone came, guess we lost all the settings when we reset to factory somehow..
-CC
clockcycle said:
Step 3.
Now do ##3282# again.. this time go to browser
click edit
enter spc
youll see gateway1 and gateway2, under both of these
you will see primary and secondary,,, set primary and secondary ip`s for both gateways to 010.223.002.004,, they will all be the same ip address,, and set the Port 3128 and secure Port 443 for all gatways to ,, hit done and reboot.
Cool thanks, this is the only thing different from other guides I have followed. Appreciate your time and help.
I've seen people running phones on Metro without rooting or custom roms, so I know it's all got to be in the phone's settings, once it's been houdini "flashed" (esn added to metro's database).. That's how this phone came, guess we lost all the settings when we reset to factory somehow..
-CC
Click to expand...
Click to collapse
Did it work for you?
TpyoKnig said:
Did it work for you?
Click to expand...
Click to collapse
Unfortunatly no. It is not saving the password in qpst. But if I look at the settings thru the phone with ##778talk it shows them correctly but still no data.
One tut I followed metions using the msl and proxy.metropcs.net instead. I finally got the phone to give me an error 131, invalid or wrong user name or password.
Read another tut that suggests using [email protected], gonna try that next.
Baffling, I've been doing metropcs phones since 2004 motorola razor. First android though.
-CC
EDIT: Same error, unit just can't get data
Anyone mind sharing your working ROM and or Nandroid back up? I would really like to get this Hero working again, it's not being cooperative
Thanks,
-CC
clockcycle said:
Anyone mind sharing your working ROM and or Nandroid back up? I would really like to get this Hero working again, it's not being cooperative
Thanks,
-CC
Click to expand...
Click to collapse
Clockcycle, what you need is the settings within EPST ( ##3282# ) for your provider and the APN File ?
TpyoKnig said:
Clockcycle, what you need is the settings within EPST ( ##3282# ) for your provider and the APN File ?
Click to expand...
Click to collapse
Got it working, did 3 things. Changed password to msl made by whiterabbit site instead of metropcs or the phone's msl.. Changed 2 other settings; CDMA only and flashed token's 3 instead of 3.5.
Icon changed to 1x with data arrows and a 1x D, web, mms, market all working!
Thanks.
-CC
clockcycle said:
Got it working, did 3 things. Changed password to msl made by whiterabbit site instead of metropcs or the phone's msl.. Changed 2 other settings; CDMA only and flashed token's 3 instead of 3.5.
Icon changed to 1x with data arrows and a 1x D, web, mms, market all working!
Thanks.
-CC
Click to expand...
Click to collapse
Hrm, i remember when I was flashing my phone from Sprint to PagePlus that the Data connection was reduced from EVDO to 1x due to the PRL , so maybe try an updated PRL so that you can get EVDO
Hey guys, i need MAJOR help.
So i tried these setting to get my internet to work, but all it did was make my data icon disappear, and now i have no clue on what to do....please need lots of help.
and yes i have been googling for multiple articles/forums ect.
nikefreeek51 said:
Hey guys, i need MAJOR help.
So i tried these setting to get my internet to work, but all it did was make my data icon disappear, and now i have no clue on what to do....please need lots of help.
and yes i have been googling for multiple articles/forums ect.
Click to expand...
Click to collapse
PM me..10char
PM has been sent
I also need help with this. I don't get pm me?/? please any help will be most welcome