When I enter the text message screen, and press a message to read it, the screen starts scrolled down, which means I must scroll up everytime I want to read a message. Is there a way to fix this?
Thanks
Tec1106 said:
When I enter the text message screen, and press a message to read it, the screen starts scrolled down, which means I must scroll up everytime I want to read a message. Is there a way to fix this?
Thanks
Click to expand...
Click to collapse
Yes, put back the register tweak you've edited in kaiser tweak. Using the up down as scroll.
xmoo said:
Yes, put back the register tweak you've edited in kaiser tweak. Using the up down as scroll.
Click to expand...
Click to collapse
still not working for me.
This has been covered before but I got caught by this one so here you go....
If you are using 'Kaiser Tweaks' then un-select D-Pad scroll. I you are using Shap's v1.0 select scroll for Internet (for some reason, his is the opposite of everything else!)
Other wise do a manual reg edit of....
HKLM/Software/Microsoft/Internet Explorer/Navigation/4-Way Nav and change the "0" to "1".
Hope this helps...
Related
Hey everybody! This is my first post on the xda-developers forums and I thought I'd make it a useful one. I attached the first WinMo6 application I made for my Tilt. It's a program which locks your keypad with the standard PIN prompt and quits. It's use? Lock your phone and set it to standby with two keys and no stylus.
Reason I wrote it? The second day I got the Tilt I found that the concept of being unable to lock the phone without the stylus confused and infuriated me.
Here's how you use it:
1. Download the .Zip file to your computer.
2. Extract the contents and copy the contained .Exe to your phone
3. Use jgermuga's PTT remap instructions found here:
http://forum.xda-developers.com/showpost.php?p=1577293&postcount=12
4. For the \HKLM\Software\Microsoft\Shell\Keys\40C7 key set the (Default) value to "\Path\To\KeyLock.exe" (Obviously replace \Path\To\ with the appropriate path, mine was "\Temp\")
5. Also add a string called ResetCmd with the same value.
I used "MobileRegistryEditor" to edit the registry on my Tilt. Also included in the .Zip is the source code in case you want to compile from source, audit the code, or just don't trust me. Compile it yourself if you wish.
With the above steps you can have a simple method to lock and standby your phone: Hold down the PTT talk button for just about 1 second then quickly tap your power button. As soon as the application begins launching your phone is already being locked so you do not have to wait for it to display anything other than the spinning "please wait" wheel. Power it off right away.
This has made my life significantly easier, and I hope it helps yours!
Enjoy
-Anthony
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
or you can download devicelock1.2, and map it to one of your hardware buttons. pretty much uses the built in device lock, but it makes it available so you can map it to a button, thus no need to use stylus to lock.
no need to unzip, just drag the file into your phone and install.
NguyenHuu said:
or you can download devicelock1.2, and map it to one of your hardware buttons.
Click to expand...
Click to collapse
Where would I get this?
^ i updated my post, its attached now.
Ty, I ended up searching the forums for it and found it. I'll give it shot and post back in a few.
Thanks Device Lock 1.2 Works Like a Champ. TYVM for your help sir.
Hmm whats the deal with the beeping noise right before it initates the locking?
(I take it back, I like the beeping noise..)
Whats the deal with if you have it on EASY unlock. and Black Screen
When you hold down PPT to have it lock... then after it the screen goes black you press ppt again... Your easy lock is than disabled?
(I should probably post this in the Device Lock 1.2 orignal thread http://forum.xda-developers.com/showthread.php?t=305402&highlight=device+lock)
I'm honestly unsure why it would not lock your device although I did set up a numeric PIN for my device which it prompts me to enter. Try running the .exe from the Program Files directory if you're still interested. If it doesn't lock your phone then I'm unsure why.
DuMnUt101 said:
Hmmm, doesn't seem to be working to well for me.
I orginally had setup up the 40C7 to open my "File Manager" (which worked fine)
SO I reset the value to "\Program Files\KeyLock.exe" where I had placed the file.
I ran the program.. it asked me if it was ok to run I told it yes... Scratched my head for a minute wondering what happened.. Went back to the post realized I missed step 5 "5. Also add a string called ResetCmd with the same value."
So I created a new string ResetCmd with the Value "\Program Files\KeyLock.exe" restarted the phone.. when I press the button now the loading thing comes up and the screen seems like it either flashes or flickers.. and nothing happens..
Than tried reseting the phone by pressing the little button at the bottom, after it booted up still no luck.
Let me know your thoughts... ( I used mobile registry editor as well )
What language is this programmed in, I'll just get the software from my work and see if I can play with it a bit...
OH and FYI running AT&T's Stock loaded Windows Mobile 6 Professional.
Click to expand...
Click to collapse
Yea I had tried that too. But the Device Lock 1.2 seemed to have solved my problem. Thanks though.
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
cincy1020 said:
Hi:
Sorry if this is a dumb question. When you use DeviceLock, do you still have to press the power button to wake up screen before unlocking? I hate that power button, it is too hard for me to find sometimes lol.
Thanks!
Click to expand...
Click to collapse
when you use device lock, it will lock your phone and dim it, not turn off the screen. so you do not need to press the power button to wake it up before unlocking.
there are options in the settings that will let you turn off the screen when you lock, but i dont think that is what you want. leave that setting unchecked.
When I read e-mail, the cursor automatically goes to the middle of the message instead of starting at the top. I can't find another comment on this.
I have the stock AT&T ROM (I know, lame), Kaiser Tweaks, and standard e-mail application.
Any ideas?
karch4 said:
When I read e-mail, the cursor automatically goes to the middle of the message instead of starting at the top. I can't find another comment on this.
I have the stock AT&T ROM (I know, lame), Kaiser Tweaks, and standard e-mail application.
Any ideas?
Click to expand...
Click to collapse
Had same problem myself.
Check out this thread, http://forum.xda-developers.com/showthread.php?t=351296
Maybe similar to your problem?
I am sure this never happened to mine before either.
EDIT: Just to test I backed up my phone and did a hard reset. Lo and behold it was fine without Kaiser Tweaks! Will let the guys know on their thread.
This is a side effect in the nav pad tweak that allows better scrolling in IE. Normally IE jumps from link to link and the tweak was created to allow right press to page down. The side effect is that messages open at the end instead of the beginning. So it depends on which function is most useful to you as to enable this tweak or not.
RemE said:
This is a side effect in the nav pad tweak that allows better scrolling in IE. Normally IE jumps from link to link and the tweak was created to allow right press to page down. The side effect is that messages open at the end instead of the beginning. So it depends on which function is most useful to you as to enable this tweak or not.
Click to expand...
Click to collapse
True True!
Many thanks
RemE said:
This is a side effect in the nav pad tweak that allows better scrolling in IE. Normally IE jumps from link to link and the tweak was created to allow right press to page down. The side effect is that messages open at the end instead of the beginning. So it depends on which function is most useful to you as to enable this tweak or not.
Click to expand...
Click to collapse
This is the solution! I disabled the nav pad scrolling in IE in the Kaiser Tweaks and soft reset. I use Opera Mini as my internet browser so I am not sure why I enabled it in the first place.
Thank you very much. I really appreciate it.
When I open a new email or sms, it's scrolled to the bottom of the message when i first open it, and i have to manually scroll back up to the top to see what the message is.
Anybody else getting this behavior ?
DLD
search
http://forum.xda-developers.com/search.php?searchid=9142367
in other words, disable dpad scroll in kaiser tweak
Ahh Ha been looking for a fix for this myself... Thanks !!
Nogs
ekw said:
http://forum.xda-developers.com/search.php?searchid=9142367
in other words, disable dpad scroll in kaiser tweak
Click to expand...
Click to collapse
link dead, but that fixed my problem, thanks !
dld
Anyone else got this... Every time i open a message it seems to default to the bottom of the message... i.e. a blank screen. So I have to scroll up to the top of every message i get!
How do i fix this!? its really annoying!
I have the same problem... I think it is rom specific though... I am using WM6.1...Sleuth V3
It's a registry hack issue. Install Kaiser Tweaks and disable the D-Pad scrolling.
If you are using Kaisertweak, make sure you have the D-Pad Scroll Navigation set to default.
fantastic - thanks
when i installed KaiserTweak i basically just put everything onto it's advised setting
Which option is it? I cant find it in KaiserTweak.
CorruptedSanity said:
Which option is it? I cant find it in KaiserTweak.
Click to expand...
Click to collapse
In KaiserTweak Collapse all the trees one by one until you get all the way down to PocketIE. In there set D-Pad Scroll Navigation back to Disabled.
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
duke911 said:
AFAIK, this is not a registry problem. in fact all you have to do is to choose the way your messages are arranged
at the right upper corner of the messages application (right below the clock) there is a tab that arranges your message by: Message Type, From, Received, Subject
normally it's ticked to received, but if you hit Received again you will see your messages arranged from the older one you got and the newest is at the bottom... all you have to do is to hit Received again.. And you're done
Cheers
Click to expand...
Click to collapse
Perhaps you should read the actual issue again, cos you're talking about something else
oh, my bad...
knwoing this is the isuue, it happens with me also sometimes
Thanks
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
KaiserTom said:
Hi Guys, Thanks alot. that was really starting to bug me, and I had the feeling that the only way to return it to "normal" would be to hard reset, so just deseleting the D Pad in the Tweak and soft resetting has saved me alot of trouble.
Thanks Again,
Tom
Click to expand...
Click to collapse
Hey guys,
I'm experiencing the same thing with a Helmi AKU 3.5 ROM that I've put on my Universal. I know that KaiserTweak is for the....Kaiser, but I was wondering if anyone knew exactly which registry hack to change to "disable DPad scrolling". I read in one of these posts that it was under the PocketIE settings, and I do know that my PocketIE has been hacked to support "high resolution mode", so maybe this is what is causing my issue (although I've found nothing about the setting in IE itself).
If anyone can enlighten me (probably with a Registry setting), even if you've already 'fixed' your Kaiser, I would appreciate it immensely, as this small issue is slowly driving me nuts!
Thanks in advance all,
-scar
I have been using the transcriber function and it has been working great. But now it has stopped working. When I click transcriber, then try and write, it acts as if I am trying to select text. How can I re enable it?
***bump***
You have obviously done the obvious - click on the keyboard at the bottom of the screen until the ARROW comes up beside it and clicked on the arrow and then selected TRANSCRIBER...
Obviously you have done that. What happened when you did that?
Bill
whk said:
You have obviously done the obvious - click on the keyboard at the bottom of the screen until the ARROW comes up beside it and clicked on the arrow and then selected TRANSCRIBER...
Obviously you have done that. What happened when you did that?
Bill
Click to expand...
Click to collapse
Obviously you are right...LOL
When I click on transcriber as you have mentioned, the transcriber bar shows up with the arrows backspace settings and all. But when I try and write on the screen, the transcriber bar goes away and it then acts as if I am trying to select lines of text. I have looked around on my phone but I can't find anything to reset it.
are u sure ur in the text box where u are supposed to type when u open the transcriber?
try giving focus to the box first and then choose transcriber
I tried using transcriber today, but it won't recognize my text at all when I try to use it in the Notes section of my contacts. I write a word, it disappers and I hear a beep.
bapssystupr3m3 said:
are u sure ur in the text box where u are supposed to type when u open the transcriber?
try giving focus to the box first and then choose transcriber
Click to expand...
Click to collapse
I have done that. I click in the area where I would normally use the keyboard and the transcriber bar comes up. I then try to write and the transcriber bar goes away. Not sure what to do.
Philosofy said:
I tried using transcriber today, but it won't recognize my text at all when I try to use it in the Notes section of my contacts. I write a word, it disappers and I hear a beep.
Click to expand...
Click to collapse
Mine won't even show the word I'm trying to write. I used to write on the screen and it would show what I was writing but it doesn't get that far. No beeps or anything.
Any ideas guys besides a hard reset???
The notes field will work with transcriber. So don't do a hard reset. You have to click on the EDIT button on the lower left and THEN it will work.
Bill
Actually works just fine in contact/notes....provided you are in the edit mode instead of just viewing
A hard reset seemed to fix mine...
Just a Reminder
Touchflo and the Transcriber don't play nice together so make sure to disable Touchflo.