Database Develop

words repeating (reaaaaaaalyyyy repeeeeeeeeeatinggggggggg)

joey jojo said:
i just have one problem, when typing on my keyboard, sometimes, not all the time, keys stick and after pressing a key i get something like thissssssssssssssssssssssssssssssssssssssssssssssssssssssss
is this fixable??, is anyone else having this problem???
Click to expand...
Click to collapse
I'm having this problem. And the sms delay on writting too. It is a real annoyance 'cause I can not write nice poems to my love anymore. :?
But I think would be better to open another thread. So I'm doing it...
PD: the prooooooooooooooooblemmmmmmmmmmmm with words repeating were showing on 2003SE also....

i also get it but only on wm5

annoyance
c'mon, people, nobody with a solution???

I have the same problem.

Some programs in WM5 tend to take up processor cycles, and appear to be causing the problem.
Problem is, there are MANY possible programs (causes).
For me, the most common cause is Internet Explorer. Go to "Memory" in Settings, and close all tasks. Then try using the keyboard again. If it works, then you know that's the cause. Then, you can try to narrow down the program that's the processor hog.
Good luck!

turn down the repeating speed, it is in start>settings>keyboard>repeat settings. set it low so it will not repeat like that

First of all, thanks for your answers!
TheGadgetGuy said:
Some programs in WM5 tend to take up processor cycles, and appear to be causing the problem.
Click to expand...
Click to collapse
Yeah, I thought so, anyway I'm having the same problem on the SMS window. It seems to do a redraw (or better, a recalc) every time I push a letter on my keyboard, and it looses words. Took me 'bout 10 times to get the right number on the 'To:' field. I was always getting +3423888888888 etc...
TheGadgetGuy said:
Go to "Memory" in Settings, and close all tasks. Then try using the keyboard again.
Click to expand...
Click to collapse
At no avail. Doesn't work...
obiesoft said:
turn down the repeating speed, it is in start>settings>keyboard>repeat settings. set it low so it will not repeat like that
Click to expand...
Click to collapse
I think you mean: start>settings>system>keyboard>Repeats setting
Doesn't work for me either. The sliders are on its lowest position...
Didn't you guys are having this havoc on your devices??
I don't know what is happening with my baby
Any Ideas??

Maybe a little fix.
Also had a problem about the words repeating thing.
But that time my device is downclocked to 299mhz by that time.
I did a soft reset first then overclocked my device to 531mhz.
after writting a message it seem to have improved significantly.(But it still lags
for a second or half sometimes.)and the words repeating seems to be gone.
But im not totally quite sure.Still need to check it more.And tell you how's it going.
O and lastly im just wondering how come it's soo slow to open a message and switch to other messages?Unlike 2003 se which only takes a second or soo......
I'm using pocket hack master to over/downclock my device.
XDAIIS

Re: Maybe a little fix.
Ok, i'll try that....
brentchua said:
Also had a problem about the words repeating thing.
But that time my device is downclocked to 299mhz by that time.
I did a soft reset first then overclocked my device to 531mhz.
after writting a message it seem to have improved significantly.(But it still lags
for a second or half sometimes.)and the words repeating seems to be gone.
But im not totally quite sure.Still need to check it more.And tell you how's it going.
O and lastly im just wondering how come it's soo slow to open a message and switch to other messages?Unlike 2003 se which only takes a second or soo......
I'm using pocket hack master to over/downclock my device.
XDAIIS
Click to expand...
Click to collapse

arieltools said:
Yeah, I thought so, anyway I'm having the same problem on the SMS window. It seems to do a redraw (or better, a recalc) every time I push a letter on my keyboard, and it looses words. Took me 'bout 10 times to get the right number on the 'To:' field. I was always getting +3423888888888 etc...
Click to expand...
Click to collapse
The reson for the redraw, I think, is the number of characters in the message display at the bottom (i.e 1/168)
If I write an email the redraw problem is not present - if I swith to SMS it comes back...

Yeah, a clever think would be to switch this counter off. I haven't found it on the registry, nor a hack.
My question: if before it was ok, why change it?
Well anyway it is not the only reason for this word repeating problem. It appears on other programs also.
And no solution yet
Haven't had time to try brentchua solution...
ulfthomas said:
arieltools said:
Yeah, I thought so, anyway I'm having the same problem on the SMS window. It seems to do a redraw (or better, a recalc) every time I push a letter on my keyboard, and it looses words. Took me 'bout 10 times to get the right number on the 'To:' field. I was always getting +3423888888888 etc...
Click to expand...
Click to collapse
The reson for the redraw, I think, is the number of characters in the message display at the bottom (i.e 1/168)
If I write an email the redraw problem is not present - if I swith to SMS it comes back...
Click to expand...
Click to collapse

What worked for me was to turn off the "suggest words when entering text" option. You'll find it in settings - personal - Input -Word completion...

dblfun said:
What worked for me was to turn off the "suggest words when entering text" option...
Click to expand...
Click to collapse
Yeah, at the end we will have a very advanced phone capable of doing nothing useful because everything has to be turned off... :evil:
(suggest words, bluetooth, AD2P, Wireless, Video frame problems, slow phone answer, etc, etc, etc, etc, etc :evil: :evil:

stop complaining... if u don't like it just downgrade back to 2003 se and everything will work. You should realise that the blue angel wasn't made for WM5. That it works with WM5 is great...but as long as there is no official release u shouldn't complain..... It's just the way it is...

dblfun said:
stop complaining... if u don't like it just downgrade back to 2003 se and everything will work. You should realise that the blue angel wasn't made for WM5. That it works with WM5 is great...but as long as there is no official release u shouldn't complain..... It's just the way it is...
Click to expand...
Click to collapse
1- I'm complaining because this problem was already happening on 2003se (please, read above).
2- After so many problems with bluetooth, AD2P, etc, don't you think we deserve more attention from the ones that sold this devices to us?
3- If I stay on WM5 is because I realize the BA performs just ok on this OS. I'm using it mainly for work purposes.
4- Complaining is also a way of start doing things later. Something has to come first... :!: I've complained to I-mate about this problem when I had the original 2003se. No answer to date. That's why I decide turn back here and do this wonderful upgrades to my device.
What I find is this forums (as all of them in the 'net) are quite hard to search and find answers. Somehow we should find the answers given and put them in a common place (the good answers!!) i.e. the Wiki!
Anyway, what I'm looking for is answers and share them...
etc-.

ad2p
My keyboard problems seems to have almost dissapeared after turning off the word correction option. It seems is a CPU intensive program or so... Inside Word, however, the problem sometimes arises...
---
Any ad2p with blueangel and wm5 yet, boys? I can't find anything but this:
http://buzzdev.net/index.php?option...=view&id=6376&catid=26&limit=15&limitstart=45
But it seems there's still problems...

no avail
I´m having again this problem. I´ve done what have been suggested about changing the registry values for adjusting the priority values... still having this problem.
I use the device for writing a lot and any help would be very handy.
Anyone, please?
Thanks!

problem is fixed in newer roms which pagepool size have been increased.
try the AKU3.5 ROMs

Serious Tilt Problem

Ive Noticed Ever Since Purchasing My Tilt (about 3 Weeks Now) I Have Had To More And More, Have To Sleep On The Couch (my Wifes Doing). Is There A Rom Or Hack For This Problem.
......sorry I Could Not Resist.......

Maybe you should see if there's a CAB available that will remove her. I know there's a Yellow cab ready at all times
Also, see if you can find a registry hack that will disable the annoying capitalizing of every word in your posts. We Don'T Have To Capitalize Every Word Cause It's Annoying, and it wont qualify you for better parking if your CAPS lock is only partially disabled.

KD8DNS said:
Ive Noticed Ever Since Purchasing My Tilt (about 3 Weeks Now) I Have Had To More And More, Have To Sleep On The Couch (my Wifes Doing). Is There A Rom Or Hack For This Problem.
......sorry I Could Not Resist.......
Click to expand...
Click to collapse
I have had the same problem! And it got pretty bad for a few days, until I figured out a solution.
This is a bit complicated so pay very close attention (or you may want to jot these instructions down to refer to later):
1. turn the phone to look at the right side of the unit
2. locate a tiny button with a little red symbol on it. (You may have used this jewel of a button to awake your awesome Kaiser (a.k.a. at&t Tilt) phone when it has fallen asleep (while you got distracted for a few moments).
3. PRESS this button for only 1-second and release. I have learned - through trial and error - that this button also turns OFF the phone. BUT DONT WORRY! It's not really off, its just sleeping and you will still receive calls, text messages and even calendar event reminders (whew I worried about receiving these!).
I know these instructions can be very stressful, but they may have saved my marriage. I would highly consider you trying this procedure at least once an evening (like during meals, when your spouse is trying to communicate with you, and especially (grin) at 1am while your laying in bed browsing the xda-developers forums for all the cool tools, cabs and Roms out there and your wife rolls over and says, "don't you ever put that thing down??!!"
;-)

Sorry about the caps i wa not paying attention.

KD8DNS said:
Sorry about the caps i wa not paying attention.
Click to expand...
Click to collapse
I thought your post was funny. This place can use more light-hearted comedy.

ronfin44 said:
Maybe you should see if there's a CAB available that will remove her. I know there's a Yellow cab ready at all times
Also, see if you can find a registry hack that will disable the annoying capitalizing of every word in your posts. We Don'T Have To Capitalize Every Word Cause It's Annoying, and it wont qualify you for better parking if your CAPS lock is only partially disabled.
Click to expand...
Click to collapse
You have to make sure you get the right kind of cab though... It can be confusing because here in the DC area yellow cabs aren't yellow, they are bright orange??? You must be very careful because you must be sure you really want to do that before you run the cab. It is usually very painful, difficult, and expensive to uninstall the wife update. Even then if you manage to partially uninstall the wife, if you have added new devices to your PAN while the wife update was installed then it may take up to 18 years to fully uninstall the wife. It wrecks havoc with your network settings, and often once uninstalled the wife update will often take half of your network resources and permissions with it (sometimes all of them!). Also be very careful of MIL.dll. It often installs itself in the background when the wife update is being installed. MIL.dll is often considered spyware, nagware, and often it falls within both categories, but there is often nothing much that can be done about MIL.dll without uninstalling the wife update. Some feel it is worth starting all over again with just a bare-bones system, but most feel that the benefits of the wife update outweigh the negatives. It is better to live with the occasional problems that the wife update may cause, than to try and remove it.

Try hard reseting her. Hold down both of her soft nipples and stick your stylus in her butt. That should get quick results. haha

ronfin44 said:
Try hard reseting her. Hold down both of her soft nipples and stick your stylus in her butt. That should get quick results. haha
Click to expand...
Click to collapse
I knew I was doing something wrong, I kept putting her in bootloader mode but she said she'd never done that before!
Mike

ronfin44 said:
That should get quick results.
Click to expand...
Click to collapse
I thought sticking your stylus in the wrong hole caused permanent damage to your pins?!

Steve-C said:
I thought sticking your stylus in the wrong hole caused permanent damage to your pins?!
Click to expand...
Click to collapse
I'm using Dutty's special Bottylicious ROM. Works great with softcore resets like that! haha

LMAO! Maybe you could just install another cab Iv seen around, It's called abitontheside.cab, it can be simply installed without going through all the bother of unstalling the wife update. Just make sure you dont run both at the same time as Iv heard they can conflict with each other.

I bought my wife an iPhone, now she can't say anything because she spends just as much time surfing the web and playing with the other 4 things you can do with an iPhone

TyTn II Changes

I figured someone might know of a way to change the few little things that annoy me with my TyTn II. Ive had it for a while and pretty much only use it as a phone, now I have more free time to play around with it, and searching through threads & accroynms I'm starting to figure out what everyone it talking about.
Here are the few things that but me.
After a call screen locking bug - but I found a thread and fix for it, sad that HTC still hasnt fixed it though.
SMS sent notification - I seriously wish it wouldnt tell me the message has been sent and I can hit dismiss or doing something else and it goes away, but it still pops up and gets in the way.
New SMS - most phones you can click a button to stop the vibration or sound, I dont like how it vibrates non stop for a very long time and or I have to wait for the sounds to finish it, I cant cancel it by click the phone end button or any button for that matter. I have a sound that is kind of long, its funny, but I dont always want to listen to it all the way through.
Anyone know of registery fixes or programs/patches please let me know! Thanks

Try this to disable the SMS Sent notifications
can be uninstalled via remove programs too if you want them back
let me know if it works (it works for me on my hermes)

Thanks I'll try tonight when I get back home.
Also I wonder if its a setting, but FF at home and IE7 at work, when I try to click on quick reply and try to click any of the icons, it wont active, I normally have to click on quote to be able to reply, I didnt think it was a setting in my user CP, and two different PC/Browsers wasnt sure what the problem is.

Um.. why not just download KAISER TWEAK. It has all those annoying options in there so you can tweak them yourself. Do a search for it.

Kaisertweek does fix most of the issues you are talking about and you don't even need to search, all you have to do is LOOK at the first page of the Kasier general forum, it is one of the stickies on the first page.
Good luck with your Kaiser

Ok this fixed most of my issues. I got to check out something else tomorrow and see if I'm still having the problem.

vibrating on startup

is there any way to prevent diamond from vibrating on startup?
thank you!

There probably is but it woudl mean you have to go through the registry to find the relevant keys and adjust them. I myself dont know which keys would do the job but im sure someone here will be able to help you out.

Now this is probably not the answer you are looking for - but why? Not trying to flame or anything, but I've noticed sometimes a lot of energy can be spent on irrelevant problems. With all due respect, this seems like one of those to me.
A bit more to the point - I strongly doubt a registry value can change that - the vibration occurs apparently BEFORE the operating system is loaded, so registry is meaningless at this point.

I think the phone does a self-test....like said before: it does vibrate before the OS loads, so I don't think there is any registery tweak for this

Caspertje19 said:
I think the phone does a self-test....like said before: it does vibrate before the OS loads, so I don't think there is any registery tweak for this
Click to expand...
Click to collapse
Ya it does, it cheks all the systems on startup. So be worried if it does NOT vibrate, means your vib crappppeddd out.
Cheers boys

pedmond said:
Now this is probably not the answer you are looking for - but why? Not trying to flame or anything, but I've noticed sometimes a lot of energy can be spent on irrelevant problems. With all due respect, this seems like one of those to me.
A bit more to the point - I strongly doubt a registry value can change that - the vibration occurs apparently BEFORE the operating system is loaded, so registry is meaningless at this point.
Click to expand...
Click to collapse
sure it's one of the less important things...
but for me it's a annoying one because i always let spb-backup do a daily backup (which is rebooting after the job) early in the morning when i'm still sleeping - it was fine with trinity (there i had also to do a reg-tweak to disable startup-animation with sound) - with diamond sometimes i get scared from the vibration...
and yes - i'm not sleeping like a log...

endebe said:
sure it's one of the less important things...
but for me it's a annoying one because i always let spb-backup do a daily backup (which is rebooting after the job) early in the morning when i'm still sleeping - it was fine with trinity (there i had also to do a reg-tweak to disable startup-animation with sound) - with diamond sometimes i get scared from the vibration...
and yes - i'm not sleeping like a log...
Click to expand...
Click to collapse
Hehe - I see your point. Not much you can do about it though, I'm afraid.
This being said, if that vibration wakes you up, I really hope your home is VERY soundproof

Or simply put your diamond on or under a pillow.

Obviously there needs to be a movie about those horrible phones that go around terrifying people in their sleep!
That said, presumably you are putting the phone on a hard surface? Try putting it on something soft and wooly. Should significantly cut down the noise from those demonic vibrations.

Don't think there's a way to do that. The Touch Cruise does the same, and no one has figured out a way to disable it there as far as I know.
The issue with putting it on a soft surface to not make noise is (presumably) that if he did get an actual call or message, it would also silence that as well.
Can you change your schedule for SPB Backup to do its thing just as you go to sleep instead of in the middle of the night? Or if you don't always sleep at the same time, kick it off manually just as you go to sleep or step into the shower?
I know these don't solve your question, but are ideas to create the desired outcome

i hope i am not ruining this important topic with my high tech proposal for a solution.....
maybe it will be less stressful if you'll program the back up at a different hour....let's say ....when you are brushing yr teeth in the evening....BEFORE you go to sleep.
the back up (thanks god for SPB backup, it saved my ass so many times) takes only 3-4 minutes. right before you'll go to the lalala world you'll hear the reassuring vibe and you'll fall asleep with a smile on yr face knowing that the job is done.
good night, sweet prince. good night back-uped diamond....

I love how this topic gets so many replied but more usefull problems get none. Got to love the internet
I could code you a microcontroller to ignore any vibration signal for the first 30 seconds from start. All you'd need to do is open your diamond and solder it inside.
Hey its a solution

someone1234 said:
I love how this topic gets so many replied but more usefull problems get none. Got to love the internet
I could code you a microcontroller to ignore any vibration signal for the first 30 seconds from start. All you'd need to do is open your diamond and solder it inside.
Hey its a solution
Click to expand...
Click to collapse
lol! yr solution is very low tech comparing with mine...that's all you got?

Time running slow

Hi all,
I have noticed the clock on my diamond runs slow. I dont switch the phone off but when I check the time its fallen back by about 3 mins everyday.
Any ideas on how I can rectify this?
Using .07 radio and duttys 1.6

Im having the same problem. Anyone got a solution?

really strange, never noticed before, but I'm currently using a different rom & radio

I have the same problem but it doesn't fall behind as fast, probably 3 mins in a week.
Using Stock 1.93 ROM
Would be great if someone could look into this.

same here....
I have been waiting for an answer for 2 months but no one seems to know how to solve this problem....

... and the same here ...
I have to set my clock every 5 days.
I think it is about 2 to 3 minutes a week.

mine is like 2-3 mins a day...

Same problem with mine: about 2 to 3 minutes a day delay everyday.
I'm using ROM version 1.93.831.1 WWE by the way.
I hope somebody can figure out this bug.
Thanks.

After I set Setting/Phone/Timezone to auto, my clock didn't skip any more. I don't know if it involves data usage though.
Johnny

I tried to tick that also, but it does not work for me...

No problems here on original rom.
maybe there is a serie with a bad crystal inside.
Grtzzz

after midnight..clock is slow
Hello guys....
there's something I notified a few weeks ago, and I saw this thread, so I would like to tell you this...
everytime when it's after midnight for example: 00.20 and then when I turn on the screen with the powerbutton when it's in standby the clock will not move directly to the correct time, but it wil just flip very vast untill the right time....
Does anybody else have this problem to??? I hope somebody understand what I'm trying to say....It's not very frustrating, but at least it's annoying...
thanks guys!!
greetzz Jeroen

Pietje_1985 said:
Hello guys....
there's something I notified a few weeks ago, and I saw this thread, so I would like to tell you this...
everytime when it's midnight for example: 00.20 and then when I turn on the screen with the powerbutton when it's in standby the clock will not move directly to the correct time, but it wil just flip very vast untill the right time....
Does anybody else have this problem to??? I hope somebody understand what I'm trying to say....It's not very frustrating, but at least it's annoying...
thanks guys!!
greetzz Jeroen
Click to expand...
Click to collapse
I have not tried it but will do so when I have time, i.e. when I'm still awake at midnight
Anyway before I go to sleep, I always turned off my unit to conserve the battery. Still the problem persists with regards to time delay of 2 to 3 minutes everyday.

HiddenLight said:
I have not tried it but will do so when I have time, i.e. when I'm still awake at midnight
Anyway before I go to sleep, I always turned off my unit to conserve the battery. Still the problem persists with regards to time delay of 2 to 3 minutes everyday.
Click to expand...
Click to collapse
That's what I also do...but still....very strange behaviour and especially if you just want to see before you go to bed, if you havn't missed a call or a text or so..

I don't know how to replicate it, but i've had this happen even at 11am! It doesn't really bother me, though. In fact, i quite like it sometimes! Because of the way it's doing it, I really doubt this is a bug... it must be something done on purpose. Perhaps you can contact HTC about it...

Mastermnd said:
I don't know how to replicate it, but i've had this happen even at 11am! It doesn't really bother me, though. In fact, i quite like it sometimes! Because of the way it's doing it, I really doubt this is a bug... it must be something done on purpose. Perhaps you can contact HTC about it...
Click to expand...
Click to collapse
I already asked NisseDILLIGAF about this, and he also doesn't know how this could happen...actually sometimes it's quite funny, although I don't really mind...I was just curious if somebody else had the same issue...lol

tytn clock
have a tytn II and the same issue with me, the clock runs slower than normal time like 2-3 minutes within 4-5 days.

Pietje_1985 said:
Hello guys....
there's something I notified a few weeks ago, and I saw this thread, so I would like to tell you this...
everytime when it's after midnight for example: 00.20 and then when I turn on the screen with the powerbutton when it's in standby the clock will not move directly to the correct time, but it wil just flip very vast untill the right time....
Does anybody else have this problem to??? I hope somebody understand what I'm trying to say....It's not very frustrating, but at least it's annoying...
thanks guys!!
greetzz Jeroen
Click to expand...
Click to collapse
I have the same problem and posted two messages. I couldn't find a solution yet

I think this might be more wide spread that we think but its not getting noticed by people who sync with PC frequently. I have found that If you use active sync it resets the time to the PC time each time you connect!
Still needs sorting though!!

having the same problem. what I didnt like is my Sony Ericsson phone got an option to get the clock from network so dont have to bother about the time. my diamond seems to lag2-3 min a day. I tried the option GPS clock sync but still it's the same.( i use gps quite often)