is there any way to prevent diamond from vibrating on startup?
thank you!
There probably is but it woudl mean you have to go through the registry to find the relevant keys and adjust them. I myself dont know which keys would do the job but im sure someone here will be able to help you out.
Now this is probably not the answer you are looking for - but why? Not trying to flame or anything, but I've noticed sometimes a lot of energy can be spent on irrelevant problems. With all due respect, this seems like one of those to me.
A bit more to the point - I strongly doubt a registry value can change that - the vibration occurs apparently BEFORE the operating system is loaded, so registry is meaningless at this point.
I think the phone does a self-test....like said before: it does vibrate before the OS loads, so I don't think there is any registery tweak for this
Caspertje19 said:
I think the phone does a self-test....like said before: it does vibrate before the OS loads, so I don't think there is any registery tweak for this
Click to expand...
Click to collapse
Ya it does, it cheks all the systems on startup. So be worried if it does NOT vibrate, means your vib crappppeddd out.
Cheers boys
pedmond said:
Now this is probably not the answer you are looking for - but why? Not trying to flame or anything, but I've noticed sometimes a lot of energy can be spent on irrelevant problems. With all due respect, this seems like one of those to me.
A bit more to the point - I strongly doubt a registry value can change that - the vibration occurs apparently BEFORE the operating system is loaded, so registry is meaningless at this point.
Click to expand...
Click to collapse
sure it's one of the less important things...
but for me it's a annoying one because i always let spb-backup do a daily backup (which is rebooting after the job) early in the morning when i'm still sleeping - it was fine with trinity (there i had also to do a reg-tweak to disable startup-animation with sound) - with diamond sometimes i get scared from the vibration...
and yes - i'm not sleeping like a log...
endebe said:
sure it's one of the less important things...
but for me it's a annoying one because i always let spb-backup do a daily backup (which is rebooting after the job) early in the morning when i'm still sleeping - it was fine with trinity (there i had also to do a reg-tweak to disable startup-animation with sound) - with diamond sometimes i get scared from the vibration...
and yes - i'm not sleeping like a log...
Click to expand...
Click to collapse
Hehe - I see your point. Not much you can do about it though, I'm afraid.
This being said, if that vibration wakes you up, I really hope your home is VERY soundproof
Or simply put your diamond on or under a pillow.
Obviously there needs to be a movie about those horrible phones that go around terrifying people in their sleep!
That said, presumably you are putting the phone on a hard surface? Try putting it on something soft and wooly. Should significantly cut down the noise from those demonic vibrations.
Don't think there's a way to do that. The Touch Cruise does the same, and no one has figured out a way to disable it there as far as I know.
The issue with putting it on a soft surface to not make noise is (presumably) that if he did get an actual call or message, it would also silence that as well.
Can you change your schedule for SPB Backup to do its thing just as you go to sleep instead of in the middle of the night? Or if you don't always sleep at the same time, kick it off manually just as you go to sleep or step into the shower?
I know these don't solve your question, but are ideas to create the desired outcome
i hope i am not ruining this important topic with my high tech proposal for a solution.....
maybe it will be less stressful if you'll program the back up at a different hour....let's say ....when you are brushing yr teeth in the evening....BEFORE you go to sleep.
the back up (thanks god for SPB backup, it saved my ass so many times) takes only 3-4 minutes. right before you'll go to the lalala world you'll hear the reassuring vibe and you'll fall asleep with a smile on yr face knowing that the job is done.
good night, sweet prince. good night back-uped diamond....
I love how this topic gets so many replied but more usefull problems get none. Got to love the internet
I could code you a microcontroller to ignore any vibration signal for the first 30 seconds from start. All you'd need to do is open your diamond and solder it inside.
Hey its a solution
someone1234 said:
I love how this topic gets so many replied but more usefull problems get none. Got to love the internet
I could code you a microcontroller to ignore any vibration signal for the first 30 seconds from start. All you'd need to do is open your diamond and solder it inside.
Hey its a solution
Click to expand...
Click to collapse
lol! yr solution is very low tech comparing with mine...that's all you got?
Related
Ive Noticed Ever Since Purchasing My Tilt (about 3 Weeks Now) I Have Had To More And More, Have To Sleep On The Couch (my Wifes Doing). Is There A Rom Or Hack For This Problem.
......sorry I Could Not Resist.......
Maybe you should see if there's a CAB available that will remove her. I know there's a Yellow cab ready at all times
Also, see if you can find a registry hack that will disable the annoying capitalizing of every word in your posts. We Don'T Have To Capitalize Every Word Cause It's Annoying, and it wont qualify you for better parking if your CAPS lock is only partially disabled.
KD8DNS said:
Ive Noticed Ever Since Purchasing My Tilt (about 3 Weeks Now) I Have Had To More And More, Have To Sleep On The Couch (my Wifes Doing). Is There A Rom Or Hack For This Problem.
......sorry I Could Not Resist.......
Click to expand...
Click to collapse
I have had the same problem! And it got pretty bad for a few days, until I figured out a solution.
This is a bit complicated so pay very close attention (or you may want to jot these instructions down to refer to later):
1. turn the phone to look at the right side of the unit
2. locate a tiny button with a little red symbol on it. (You may have used this jewel of a button to awake your awesome Kaiser (a.k.a. at&t Tilt) phone when it has fallen asleep (while you got distracted for a few moments).
3. PRESS this button for only 1-second and release. I have learned - through trial and error - that this button also turns OFF the phone. BUT DONT WORRY! It's not really off, its just sleeping and you will still receive calls, text messages and even calendar event reminders (whew I worried about receiving these!).
I know these instructions can be very stressful, but they may have saved my marriage. I would highly consider you trying this procedure at least once an evening (like during meals, when your spouse is trying to communicate with you, and especially (grin) at 1am while your laying in bed browsing the xda-developers forums for all the cool tools, cabs and Roms out there and your wife rolls over and says, "don't you ever put that thing down??!!"
;-)
Sorry about the caps i wa not paying attention.
KD8DNS said:
Sorry about the caps i wa not paying attention.
Click to expand...
Click to collapse
I thought your post was funny. This place can use more light-hearted comedy.
ronfin44 said:
Maybe you should see if there's a CAB available that will remove her. I know there's a Yellow cab ready at all times
Also, see if you can find a registry hack that will disable the annoying capitalizing of every word in your posts. We Don'T Have To Capitalize Every Word Cause It's Annoying, and it wont qualify you for better parking if your CAPS lock is only partially disabled.
Click to expand...
Click to collapse
You have to make sure you get the right kind of cab though... It can be confusing because here in the DC area yellow cabs aren't yellow, they are bright orange??? You must be very careful because you must be sure you really want to do that before you run the cab. It is usually very painful, difficult, and expensive to uninstall the wife update. Even then if you manage to partially uninstall the wife, if you have added new devices to your PAN while the wife update was installed then it may take up to 18 years to fully uninstall the wife. It wrecks havoc with your network settings, and often once uninstalled the wife update will often take half of your network resources and permissions with it (sometimes all of them!). Also be very careful of MIL.dll. It often installs itself in the background when the wife update is being installed. MIL.dll is often considered spyware, nagware, and often it falls within both categories, but there is often nothing much that can be done about MIL.dll without uninstalling the wife update. Some feel it is worth starting all over again with just a bare-bones system, but most feel that the benefits of the wife update outweigh the negatives. It is better to live with the occasional problems that the wife update may cause, than to try and remove it.
Try hard reseting her. Hold down both of her soft nipples and stick your stylus in her butt. That should get quick results. haha
ronfin44 said:
Try hard reseting her. Hold down both of her soft nipples and stick your stylus in her butt. That should get quick results. haha
Click to expand...
Click to collapse
I knew I was doing something wrong, I kept putting her in bootloader mode but she said she'd never done that before!
Mike
ronfin44 said:
That should get quick results.
Click to expand...
Click to collapse
I thought sticking your stylus in the wrong hole caused permanent damage to your pins?!
Steve-C said:
I thought sticking your stylus in the wrong hole caused permanent damage to your pins?!
Click to expand...
Click to collapse
I'm using Dutty's special Bottylicious ROM. Works great with softcore resets like that! haha
LMAO! Maybe you could just install another cab Iv seen around, It's called abitontheside.cab, it can be simply installed without going through all the bother of unstalling the wife update. Just make sure you dont run both at the same time as Iv heard they can conflict with each other.
I bought my wife an iPhone, now she can't say anything because she spends just as much time surfing the web and playing with the other 4 things you can do with an iPhone
Anyway or program that would disable the screen lighting up when receiving a sms or email??? i cant stand when its in my pocket and the damn touchscreen comes on and it starts hitting sh*t lol.
(and no i dont wanna lock and unlock the keys each time)
thanks
cweems said:
Anyway or program that would disable the screen lighting up when receiving a sms or email??? i cant stand when its in my pocket and the damn touchscreen comes on and it starts hitting sh*t lol.
(and no i dont wanna lock and unlock the keys each time)
thanks
Click to expand...
Click to collapse
I dont know if it helps, but try to disable the notification for new sms.
ill try that... but i do still want sound
think im jus outta luck, ill jus have to deal w/ it.
it bothers the hell out of me too.
i wish there was a fix.
In order for there to be a "fix," it has to be broken first. This is how it was designed. When you get a message the phone wakes and receives the message. Therefore, the screen lights up. So there is no "fix," its functioning as designed. Though if anyone knows of "tweak" you may be able to change it. But I really don't think there is a way.
wow dude lol i couldnt care less about terminology... its a problem for me and its annoying so i want a fix for the problem
Blackberry knows wut theyre doing , jus makes the noise and screen stays off!! lol
o well ill live
cweems said:
wow dude lol i couldnt care less about terminology... its a problem for me and its annoying so i want a fix for the problem
Blackberry knows wut theyre doing , jus makes the noise and screen stays off!! lol
o well ill live
Click to expand...
Click to collapse
There you go again asking for a "fix" to the screen lighting up. The point I'm trying to make is that this is like going to Ford and saying every time I turn the Wheel to the Left the car goes Left. Can you fix that?
Also, I would think that preventing the Screen from Coming on when the Device is "doing something" would prevent it from coming on when you wanted to.
JimmyMcGee said:
There you go again asking for a "fix" to the screen lighting up. The point I'm trying to make is that this is like going to Ford and saying every time I turn the Wheel to the Left the car goes Left. Can you fix that?
Also, I would think that preventing the Screen from Coming on when the Device is "doing something" would prevent it from coming on when you wanted to.
Click to expand...
Click to collapse
lol not everywants their screen to light up when somthing comes in, everyone wants thier car to turn left when they turn the wheel left.
cant believe we r goin this far about a word, but im not quitting!!
Definitions of fix...
1. to repair; mend.
2. to put in order or in good condition; adjust or arrrange: She fixed her hair in a bun.
3. to make fast, firm, or stable.
4. to place definitely and more or less permanently: to fix a circus poster to a wall.
5. to settle definitely; determine: to fix a price.
6. to direct (the eyes, the attention, etc.) steadily: His eyes were fixed on the distant ship.
7. to attract and hold (the eye, the attention, etc.).
8. to make set or rigid.
9. to put into permanent form.
10. to put or place (responsibility, blame, etc.) on a person.
11. to assign or refer to a definite place, time, etc.
12. to provide or supply with (something needed or wanted): How are you fixed for money?
13. Informal. to arrange or influence the outcome or action of, esp. privately or dishonestly: to fix a jury; to fix a game.
14. to get (a meal); prepare (food): What time shall I fix supper?
15. Informal. to put in a condition or position to make no further trouble.
16. Informal. to get even with; get revenge upon: I'll fix him!
so from these examples it obviously means something doesnt have to be broken to be fixed. could mean many things, and im using number 2, adjust or arrange. like it says, doesnt mean the girls hair was broken, she jus didnt like it so she fixed it to make it better.
FIX my screen from lighting up!!!!!!!!!!!!!!!!!!!!!!
haha
I think it is a problem. My back light goes on from an email and stays on till the battery dies or I notice it. I have to be careful and check it frequently or I get a dead phone by lunch. I need the backlight to do what I setup in the power settings - I think it should be turning itself off. It ain't.
u changed it under power settings and under backlight settings?? def shouldnt stay on toooo long!
ki think we are outta luck here. I have the same problem.
I just have to lock the device from having anything accidently turn on
look mr. mcgee, you are very right ("its functioning as designed"), but it's a poor design to say the least. (Fire the turd that came up with that design)
If someone sends me a message i'm forced to stop everything i'm doing so that my phone doesn't get into mischief and go calling other people without my knowing.
I usually have my phone in my holster with S2U2 running. If only there was a way S2U2 would not wake up for anything other than a phone call, but would still vibrate or ring you when you receive an sms or the like.
If someone could come up with a fix..(or excuse me)... a tweak..... I WOULD REALLY APPRECIATE IT!
+1!!!!!!!!!!!!!
jsd2 said:
look mr. mcgee, you are very right ("its functioning as designed"), but it's a poor design to say the least. (Fire the turd that came up with that design)
If someone sends me a message i'm forced to stop everything i'm doing so that my phone doesn't get into mischief and go calling other people without my knowing.
I usually have my phone in my holster with S2U2 running. If only there was a way S2U2 would not wake up for anything other than a phone call, but would still vibrate or ring you when you receive an sms or the like.
If someone could come up with a fix..(or excuse me)... a tweak..... I WOULD REALLY APPRECIATE IT!
Click to expand...
Click to collapse
Its a poor design maybe for u and some other few people. The majority think its a good design. I cant seem to understand your problem. When someone sends me an sms and my phone is in my case(holster) and I dont want to read it, I just leave it and the backlight turns of itself. Where is the problem?
Mikulec said:
Its a poor design maybe for u and some other few people. The majority think its a good design. I cant seem to understand your problem. When someone sends me an sms and my phone is in my case(holster) and I dont want to read it, I just leave it and the backlight turns of itself. Where is the problem?
Click to expand...
Click to collapse
Pretty much exactly my point. It seems every month or so some person comes in and attacks the phone for doing what its supposed to. This is the second Light comes on when I get a SMS thread I've seen. Next people will complain because the phone is ringing when they get a phone call.
As for the person who's light stays on indefinitely after receiving a email you may actually have a problem. The phone sometimes will "stay awake" if there is some program running in the background that is misbehaving.
JimmyMcGee said:
Pretty much exactly my point. It seems every month or so some person comes in and attacks the phone for doing what its supposed to. This is the second Light comes on when I get a SMS thread I've seen. Next people will complain because the phone is ringing when they get a phone call.
As for the person who's light stays on indefinitely after receiving a email you may actually have a problem. The phone sometimes will "stay awake" if there is some program running in the background that is misbehaving.
Click to expand...
Click to collapse
Thank heavens I am not the only one. I thought someone from xda made a secret competition and the winner will be the one that have the most complains on his phone. If u dont like your phone, buy another one that suites u better then this one. Sorry for being so b*tchy.
JimmyMcGee said:
Pretty much exactly my point. It seems every month or so some person comes in and attacks the phone for doing what its supposed to. This is the second Light comes on when I get a SMS thread I've seen. Next people will complain because the phone is ringing when they get a phone call. ...
Click to expand...
Click to collapse
Phones and everything in life can always be more. In this case our phones could, and in my opinion should, be more customizeable. The reason they aren't is because if the phone user feels overwhelmed by the complexity of their device, they may not like it and will be less likely to buy another in the future, so from a marketing standpoint there is reason to dumb things down to a degree.
I, however, want as much customizeability as possible.
My girlfriend's Samsung i760 behaves different from my kaiser. On her phone SMS messages will NOT bring the phone out of standby (and turn the display on.) It does give the requested sound and/or vibration alert and flash the LED and display the message notification on screen (when you turn it on) for the set time periods, though. The i760 runs WM6 like our kaisers. My kaiser, as well as every other HTC device I've ever owned does take the phone out of standby and turn the display on for SMS, though. So this tells me there definitely is some software method of tweaking it so that it does what you want. I don't know what it is, but it would sure be nice of someone knew of a registry setting for it.
BTW, our kaisers take the phone out of standby for SMS and MMS (and phone calls, of course), but don't do so for emails. Every day email and SMS become closer to eachother to me in significance and importance, so why shouldn't they cause the phone to behave in the same way?
maxh said:
Phones and everything in life can always be more. In this case our phones could, and in my opinion should, be more customizeable. The reason they aren't is because if the phone user feels overwhelmed by the complexity of their device, they may not like it and will be less likely to buy another in the future, so from a marketing standpoint there is reason to dumb things down to a degree.
I, however, want as much customizeability as possible.
My girlfriend's Samsung i760 behaves different from my kaiser. On her phone SMS messages will NOT bring the phone out of standby (and turn the display on.) It does give the requested sound and/or vibration alert and flash the LED and display the message notification on screen (when you turn it on) for the set time periods, though. The i760 runs WM6 like our kaisers. My kaiser, as well as every other HTC device I've ever owned does take the phone out of standby and turn the display on for SMS, though. So this tells me there definitely is some software method of tweaking it so that it does what you want. I don't know what it is, but it would sure be nice of someone knew of a registry setting for it.
BTW, our kaisers take the phone out of standby for SMS and MMS (and phone calls, of course), but don't do so for emails. Every day email and SMS become closer to eachother to me in significance and importance, so why shouldn't they cause the phone to behave in the same way?
Click to expand...
Click to collapse
Interesting. I'm sure there is something that could be done. I'd be willing to look into it. But I'd need a Samsung i760 to see if I could pull any info or software from it. So if anyone has a Samsung i760 they'd like to give me for development purposes of course, I'd see if we could figure out how to make this happen.
BTW, My phone does turn on the screen when I get an email.
maxh said:
Phones and everything in life can always be more. In this case our phones could, and in my opinion should, be more customizeable. The reason they aren't is because if the phone user feels overwhelmed by the complexity of their device, they may not like it and will be less likely to buy another in the future, so from a marketing standpoint there is reason to dumb things down to a degree.
I, however, want as much customizeability as possible.
My girlfriend's Samsung i760 behaves different from my kaiser. On her phone SMS messages will NOT bring the phone out of standby (and turn the display on.) It does give the requested sound and/or vibration alert and flash the LED and display the message notification on screen (when you turn it on) for the set time periods, though. The i760 runs WM6 like our kaisers. My kaiser, as well as every other HTC device I've ever owned does take the phone out of standby and turn the display on for SMS, though. So this tells me there definitely is some software method of tweaking it so that it does what you want. I don't know what it is, but it would sure be nice of someone knew of a registry setting for it.
BTW, our kaisers take the phone out of standby for SMS and MMS (and phone calls, of course), but don't do so for emails. Every day email and SMS become closer to eachother to me in significance and importance, so why shouldn't they cause the phone to behave in the same way?
Click to expand...
Click to collapse
ok, good point. Have u tried some sms applications? Maybe they have the option to not to turn the screen on. (just a suggestion).
If this ever happens to you, you have a bad phone and should return it. I really hate it when MY phone wakes up and decides to randomly call someone in Hong Kong.
Seriously - I have to understand this - you really honestly think that your phone can wake up and call someone, or email someone, or SMS someone without you doing something?
Bill
jsd2 said:
If someone sends me a message i'm forced to stop everything i'm doing so that my phone doesn't get into mischief and go calling other people without my knowing.
Click to expand...
Click to collapse
Loving the Diamond... but big issues have come up and they are starting to make it difficult to really use the device. I am trying to determine if the issues I am having are brought on by myself or if the issues are related to some challenge with the phone or my carrier.
"What's the issue," you ask?
The Diamond will not pick up a call. The phone will ring, the caller display will come up, I'll try and pick it up by either pushing the onscreen command or pick it up via the pick-up button... nothing. The call rings through to voicemail. Meanwhile I have to call the person back who just called me. Massively irritating and even more irritating it's does actually pick up SOMETIMES. The problem is I cannot determine why it works sometimes and why it does not. 90% of the time it does not work. When I do get it to work all I need to do is activate my bluetooth headset and then turn it back off and we are back in the same situation where the phone will not answer, however, this time... the phone does not RING either! Yes that's right - all sounds go bye bye on the phone when I activate BT and then turn it off. Also, I cannot pick up the phone with bluetooth headset. I can hear the phone ring through and everything looks dandy but no go! Push the pick-up button - nothing. This isn't such a big deal really - I mean - who cares if it picks up on the BT headset - I just want to be able to answer a call in general!
Now - I do have a lot of applications on the machine from a modifcation perspective and I am thinking this could all very well be my fault. I have Advance Config, Diamond TF3D config, and Diamond Tweak all loaded (each have their own benefit.)
Strange thing is... I just did a test and the phone picks up JUST FINE. I'm about ready to pull my hair out. It's really hard to put my finger on it. Tried it a second time, if I try to answer with the soft key it won't work but the hard key will work. Now the hard key will not actually hang up the call - I have to use the softkey to hang it up. I don't know if anyone is having the same issues but I am to the point of hard-reset to start from scratch.
I actually had the "can't pick up" problem just yesterday, but with my Prophet. Using Pdaviet's MyVista 6.1 Rom and S2U2. The phone rang, S2U2 displaying the full screen call notification, no chance of picking up the call.
Do you also use S2U2?
When you find your self in a hole, it usually helps if you stop digging.
Unpalatable as it might seem, I think with hassles like you've got, a HR is probably your best option.
ps, just a thought, have you at any stage in your tweaking done any button or key re-mapping... either inadvertently or by design? Maybe worth a check before giving up
wow, that's a whole load of issues
I've had my Diamond for about a week now..... and have had none of those issues..... Bluetooth works fine, picking up is a breeze....
what provider are you with?
I remember reading more complaints about sound going bye after Bluetooth use in the early days of the Diamond. Try searching around a bit and see if you can find something. However, seeing your other issues, a hard-reset might not be out of place.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Also, for aesthetics, do note that it is usually considered bad practice to place two identical symbols after each other when masking cursewords with random characters.
Click to expand...
Click to collapse
By far probably the best advise yet!
The emotional side... aka incredible hulk... came out and punched shift/keyboard number row (pounded rather.) I was thinking in my head, "smash Diamond" and the KB had to take the abuse.
Carrier information for those who asked.
CDMA Diamond on the lovely Telus system (aka - Tel-us, we take your money)
As with all troubleshooting, you need to start from beginning. When you first got the phone, it could answer call. Right? So you need to trace back to what have you done to the phone step by step and to find out when it starts to fail.
Doh... Well I reset the device... seems to work now but something that seemed to be working before was my Zune subscription music from Zune Pass was synching to my mobile device via a Synch Center setup. I was amazed it was actually working... now it's not working So - I get calling back and lose the little trick that was working - Zune Pass DRM music synching with my Diamond... you win some and you lose some I guess doh.
jessiethe3rd said:
Loving the Diamond... but big issues have come up and they are starting to ma...my carrier.
"What's the issue," you ask?........... The call rings through to voicemail. Meanwhile I have to call the person back ............who just called me. Massively irritating and ev............... to hang it up. I don't know if anyone is having the same issues but I am to......... the point of hard-reset to start from scrat.........ch.
Click to expand...
Click to collapse
You should do some research and some reading.
And relax a little before you Fire up and disrupt a Community in peace.
I have the same thing going on now... same programs installed as you.
Is it still working after a hard reset? Did you re-install all the same programs?
Well, I'm on a Telus Diamond, and had the no answer problem, and solved it with a hard reset.. just try it, it doesn't take too much to get everything back to the way you had everything..
Hi
I brought a new HTC touch diamond, i have a few problems, i am hoping that some1 will be able to advise me on how to sort this out?
1. Camera quality is very poor
2. when switching on takes abt 1 min to load
3. display goes off when making a call
4. battery last just about a day even though i dont use it much
5. the phone crashes sometimes
member786 said:
1. Camera quality is very poor
Click to expand...
Click to collapse
Compared to what? It's a mobile phone camera, it's never going to compare to a dedicated digital camera so if your expectations are too high you'll never be satisfied.
member786 said:
2. when switching on takes abt 1 min to load
Click to expand...
Click to collapse
I presume you mean after a soft reset? That's normal, the Diamond isn't just a cellphone, it's effectively a computer and computer's take time to boot up, that's just the way of things. I'm not sure why this is an issue for you because you shouldn't really have to soft reset the thing as part of day-to-day usage anyway so the time it takes should be of little consequence.
member786 said:
3. display goes off when making a call
Click to expand...
Click to collapse
That's be design, it's so you don't end up activating any of the phone functions while you've got it pressed against your ear to listen to the call. A lot of people do moan about this but I've never really understood why, you can't see the screen when you've got it pressed against the side of your head anyway so why does it matter if the screen switches off? And even if you do need to see the screen, just hit the power button to toggle it back on again, not a big deal surely?
member786 said:
4. battery last just about a day even though i dont use it much
Click to expand...
Click to collapse
Yeah, the battery is pretty ****e. The only advice I can offer is to switch off power hungry functions you're not using like wi-fi, HSDPA, Bluetooth etc as those will all hit the battery hard.
im not affected by points 1 - 4 as they are pretty minor to me.
Crashes are what seems to be my main problem as everyday there will be at least 2 crashes where my phone ceases to switch back on from sleep mode and gives a black screen till a soft reset.
After which, I will have no reception whatsoever and further resets will cause my phone to unable to find my SIM card. However, the problem persists till I get 1/2 batt, where i will get my reception back for the rest of the day
It gets really intermittent sometimes as in sometimes in the morning or sometimes at night, but never when im at the shop trying to return it
just always at least once or twice a day no matter what.
I have already switched to a new diamond twice as I had different problems with every one, each was extremely critical.
so will flashing a cooked rom help? or a new radio?
I have everything on stock as i have to hard reset it at least once a week.
does anyone have any similar problems? or did i just win the lottery 3 times
member786 said:
Hi
I brought a new HTC touch diamond, i have a few problems, i am hoping that some1 will be able to advise me on how to sort this out?
1. Camera quality is very poor
2. when switching on takes abt 1 min to load
3. display goes off when making a call
4. battery last just about a day even though i dont use it much
5. the phone crashes sometimes
Click to expand...
Click to collapse
Dude:
ALL your questions have been addressed 1000 times.
Step in XDA Devs with respect and start a search before cluttering up the site with same stuff. Search and read like we all did at one point.
Crashes: My jewel probably crashes once a month and that it, that is very understandable.
Anyhow Welcome.
someone help me out too with my diamond problem please?
anyone ?
The search button doesn't bite
Also providing some info regarding ROM and Radio would provide us with more info.
Thread is closed for the obvious reasons..
How to stop startup vibration? I detest this feature very much! help!
Im sorry to report I can't really help you with this as im no real genius on the matter but im guessing it may be due to some sort of P.O.S.T response on the device similar to the beep you here on some older pc's and laptop's. If so it may be easier for someone to find the right registry entry to change. Then again I may be talking out of my backside. Good Luck!
yinyfxda said:
How to stop startup vibration? I detest this feature very much! help!
Click to expand...
Click to collapse
Are you talking about vibrate on connection ?
Start> phone> menu>options> advanced> uncheck vibrate device when connection is established.
He's talking about when you turn the device on..
I think he's talking about the vibrate when the phone boots (from a soft or hard reset, or from turning the phone completely off)
why so bother about that vibration?
What's it matter...? He still wants to turn it off....
I'd like to as well..
I means how to stop power-on vibration or hard or soft startup vibration. anyone has already stop the vibration, it's really boring!
i would actually be interested in that as well, i have my phone setup to automatically reset itself every day at 3 in the morning, and the vibration from the reset sometimes wakes me up.
yea, i dun like the vibration either.. But i doesnt make a very big deal though
My phone feels shaking , something loose from vibrating effect.
morizq said:
why so bother about that vibration?
Click to expand...
Click to collapse
It is decreasing the battery life time , maybe not much for 1 boot.. but if you boot 20 times in a day.. ( god may know why ) Than it would be handy
freaknormel said:
It is decreasing the battery life time , maybe not much for 1 boot.. but if you boot 20 times in a day.. ( god may know why ) Than it would be handy
Click to expand...
Click to collapse
I think the booting itself will require more power than the one short vibration at the beginning
Cryonic90 said:
I think the booting itself will require more power than the one short vibration at the beginning
Click to expand...
Click to collapse
the vibrating sure isnt helping the battery life either and i would like to disable this also. 10+ resets a day here and each time it vibrates my wife thinks someone is texting me! lol
Additionally, can anyone help get rid of those red numbers during boot-up?
I know that's an obnoxiously complex task that may be impossible for seemingly little payoff, but consider:
1. They prevent using the entire display for splash images, unless you want it covered up for part of the time,
2. My friend is color-blind, and won't be able to tell if they're red, green, or purple - I don't want him to not be sure,
3. They could attract a bull, if you waved it around accidentally in Madrid,
Etc.
I'm sure you can tell there are no shortage of reasons.
Anyone have any ideas?
mikentucson said:
the vibrating sure isnt helping the battery life either and i would like to disable this also. 10+ resets a day here and each time it vibrates my wife thinks someone is texting me! lol
Click to expand...
Click to collapse
If you're SR'ing 10 times a day, it's time to fix something on your phone.
khaytsus said:
If you're SR'ing 10 times a day, it's time to fix something on your phone.
Click to expand...
Click to collapse
i probably flash just about every new rom thats posted in the rom section. that and i've been testing the android builds that get released