Problems With Diamond touch - Touch Diamond, MDA Compact IV General

Hi
I brought a new HTC touch diamond, i have a few problems, i am hoping that some1 will be able to advise me on how to sort this out?
1. Camera quality is very poor
2. when switching on takes abt 1 min to load
3. display goes off when making a call
4. battery last just about a day even though i dont use it much
5. the phone crashes sometimes

member786 said:
1. Camera quality is very poor
Click to expand...
Click to collapse
Compared to what? It's a mobile phone camera, it's never going to compare to a dedicated digital camera so if your expectations are too high you'll never be satisfied.
member786 said:
2. when switching on takes abt 1 min to load
Click to expand...
Click to collapse
I presume you mean after a soft reset? That's normal, the Diamond isn't just a cellphone, it's effectively a computer and computer's take time to boot up, that's just the way of things. I'm not sure why this is an issue for you because you shouldn't really have to soft reset the thing as part of day-to-day usage anyway so the time it takes should be of little consequence.
member786 said:
3. display goes off when making a call
Click to expand...
Click to collapse
That's be design, it's so you don't end up activating any of the phone functions while you've got it pressed against your ear to listen to the call. A lot of people do moan about this but I've never really understood why, you can't see the screen when you've got it pressed against the side of your head anyway so why does it matter if the screen switches off? And even if you do need to see the screen, just hit the power button to toggle it back on again, not a big deal surely?
member786 said:
4. battery last just about a day even though i dont use it much
Click to expand...
Click to collapse
Yeah, the battery is pretty ****e. The only advice I can offer is to switch off power hungry functions you're not using like wi-fi, HSDPA, Bluetooth etc as those will all hit the battery hard.

im not affected by points 1 - 4 as they are pretty minor to me.
Crashes are what seems to be my main problem as everyday there will be at least 2 crashes where my phone ceases to switch back on from sleep mode and gives a black screen till a soft reset.
After which, I will have no reception whatsoever and further resets will cause my phone to unable to find my SIM card. However, the problem persists till I get 1/2 batt, where i will get my reception back for the rest of the day
It gets really intermittent sometimes as in sometimes in the morning or sometimes at night, but never when im at the shop trying to return it
just always at least once or twice a day no matter what.
I have already switched to a new diamond twice as I had different problems with every one, each was extremely critical.
so will flashing a cooked rom help? or a new radio?
I have everything on stock as i have to hard reset it at least once a week.
does anyone have any similar problems? or did i just win the lottery 3 times

member786 said:
Hi
I brought a new HTC touch diamond, i have a few problems, i am hoping that some1 will be able to advise me on how to sort this out?
1. Camera quality is very poor
2. when switching on takes abt 1 min to load
3. display goes off when making a call
4. battery last just about a day even though i dont use it much
5. the phone crashes sometimes
Click to expand...
Click to collapse
Dude:
ALL your questions have been addressed 1000 times.
Step in XDA Devs with respect and start a search before cluttering up the site with same stuff. Search and read like we all did at one point.
Crashes: My jewel probably crashes once a month and that it, that is very understandable.
Anyhow Welcome.

someone help me out too with my diamond problem please?

anyone ?

The search button doesn't bite
Also providing some info regarding ROM and Radio would provide us with more info.
Thread is closed for the obvious reasons..

Related

vibrating on startup

is there any way to prevent diamond from vibrating on startup?
thank you!
There probably is but it woudl mean you have to go through the registry to find the relevant keys and adjust them. I myself dont know which keys would do the job but im sure someone here will be able to help you out.
Now this is probably not the answer you are looking for - but why? Not trying to flame or anything, but I've noticed sometimes a lot of energy can be spent on irrelevant problems. With all due respect, this seems like one of those to me.
A bit more to the point - I strongly doubt a registry value can change that - the vibration occurs apparently BEFORE the operating system is loaded, so registry is meaningless at this point.
I think the phone does a self-test....like said before: it does vibrate before the OS loads, so I don't think there is any registery tweak for this
Caspertje19 said:
I think the phone does a self-test....like said before: it does vibrate before the OS loads, so I don't think there is any registery tweak for this
Click to expand...
Click to collapse
Ya it does, it cheks all the systems on startup. So be worried if it does NOT vibrate, means your vib crappppeddd out.
Cheers boys
pedmond said:
Now this is probably not the answer you are looking for - but why? Not trying to flame or anything, but I've noticed sometimes a lot of energy can be spent on irrelevant problems. With all due respect, this seems like one of those to me.
A bit more to the point - I strongly doubt a registry value can change that - the vibration occurs apparently BEFORE the operating system is loaded, so registry is meaningless at this point.
Click to expand...
Click to collapse
sure it's one of the less important things...
but for me it's a annoying one because i always let spb-backup do a daily backup (which is rebooting after the job) early in the morning when i'm still sleeping - it was fine with trinity (there i had also to do a reg-tweak to disable startup-animation with sound) - with diamond sometimes i get scared from the vibration...
and yes - i'm not sleeping like a log...
endebe said:
sure it's one of the less important things...
but for me it's a annoying one because i always let spb-backup do a daily backup (which is rebooting after the job) early in the morning when i'm still sleeping - it was fine with trinity (there i had also to do a reg-tweak to disable startup-animation with sound) - with diamond sometimes i get scared from the vibration...
and yes - i'm not sleeping like a log...
Click to expand...
Click to collapse
Hehe - I see your point. Not much you can do about it though, I'm afraid.
This being said, if that vibration wakes you up, I really hope your home is VERY soundproof
Or simply put your diamond on or under a pillow.
Obviously there needs to be a movie about those horrible phones that go around terrifying people in their sleep!
That said, presumably you are putting the phone on a hard surface? Try putting it on something soft and wooly. Should significantly cut down the noise from those demonic vibrations.
Don't think there's a way to do that. The Touch Cruise does the same, and no one has figured out a way to disable it there as far as I know.
The issue with putting it on a soft surface to not make noise is (presumably) that if he did get an actual call or message, it would also silence that as well.
Can you change your schedule for SPB Backup to do its thing just as you go to sleep instead of in the middle of the night? Or if you don't always sleep at the same time, kick it off manually just as you go to sleep or step into the shower?
I know these don't solve your question, but are ideas to create the desired outcome
i hope i am not ruining this important topic with my high tech proposal for a solution.....
maybe it will be less stressful if you'll program the back up at a different hour....let's say ....when you are brushing yr teeth in the evening....BEFORE you go to sleep.
the back up (thanks god for SPB backup, it saved my ass so many times) takes only 3-4 minutes. right before you'll go to the lalala world you'll hear the reassuring vibe and you'll fall asleep with a smile on yr face knowing that the job is done.
good night, sweet prince. good night back-uped diamond....
I love how this topic gets so many replied but more usefull problems get none. Got to love the internet
I could code you a microcontroller to ignore any vibration signal for the first 30 seconds from start. All you'd need to do is open your diamond and solder it inside.
Hey its a solution
someone1234 said:
I love how this topic gets so many replied but more usefull problems get none. Got to love the internet
I could code you a microcontroller to ignore any vibration signal for the first 30 seconds from start. All you'd need to do is open your diamond and solder it inside.
Hey its a solution
Click to expand...
Click to collapse
lol! yr solution is very low tech comparing with mine...that's all you got?

Whats wrong with my Diamond :(

hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
eyetac said:
hey guys
have been a reader more than a poster on this awesome site..
but i have run into some trouble :/
within the past week, everytime my phone gets slightly hot, the screen alignment goes totally out.. like really out..
for example i manage to open the notes app..
if i tap the extreme left side, the draw tool will draw in either the center, or even far right.. its extremely frustrating.
Happens mostly after a phone call, using gps, or plugging phone into usb/charging..
im using Panosha's 2.2 full
Radio .05
I have tried loading the original HTC rom that came with the phone... no difference..
any help would be greatly appreciated
oh, and i do re-align... 10-15 times a day..
when the phone is cool, it runs like a dream
Click to expand...
Click to collapse
...sounds like a hardware issue!
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
eyetac said:
really? :/
damn
its only 2 months old..
wouldnt have anything to do with cooked roms right?
i really cant afford a void warranty
Click to expand...
Click to collapse
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
http://www.youtube.com/watch?v=5-IUzerAT0s
exactly what mine does
even right after a screen re-align
sigh
cyron_at said:
When you have the same probs with the htc original rom, then it has nothing to do with a cooked roms :-(
Click to expand...
Click to collapse
ok, thanks dude
will take it in and hopefully get a replacement
another example of what mine is doing pretty much to the T
http://www.youtube.com/watch?v=ZhQIyqnTkS4&feature=user
if anyone may have a solution.. please let me know asap.. as i will try taking it in on saturday
thanks guys
damn, mine does the same from time to time!
does anybody have a solution?
did a replacement fix the problem?
unfortunately i havnt had a chance to take it in yet, but i have logged the problem with my service provider..
the problem occurs alot more when i used panosha's rom/s
with the default (and now alphazero) the problem seems less frequent, but definitely still happens..
happened badly yesterday when i used gps to get my girlfriend to a casting, but switched on car A/C and after 5 minutes it was cool again *shrug*
its really annoying though
will let u know when i finally get to taking it in, unless u get there first
Hi there, I have the exactly problem what you had. Whenever the machine is hot, it becomes mad. Any solution could be reslove the problem?
It really sounds like a hardware issue... When you return the phone to the store please flash back to the original stock rom (for warranty purposes )
same problem
i am getting he same alignment problem.i do it many times a day but still tapping somewhere on screen taps the other way.very difficult to dial phone numbers
cyron_at said:
...sounds like a hardware issue!
Click to expand...
Click to collapse
i dont think its an hardware issue,as after i align it works fine for few hours and then i have to align again to make the taps work acurately.........i have heard there is a cab file for it.if any one can post it here.........................or make a cab file so that clicking it makes the alignment as it was default with the new phone
It is a hardware issue. the screen somehow (usually when carried in front pants pocket) will get pressed and SHIFTED. Then screen pushes against the side-cover and this fools the touch-sensitivity of the screen. Try yourself - try to shift screen to one or other side, and directly after it will be better. it's still a service matter though. Send it for repair.
This is a known issue. You need to exchange the unit for a new one.
hey guys...
so late last year i took the phone in and it spent 3 weeks at leaf (HTC distributer here is south africa)
i got the phone back, turned it on in the store.. and guess what... still screwed..
i threw my toys to say the least and got a brand new phone..
the new phone was 110% up until 2 weeks ago..
it started doing the same damn thing (to a lesser extent)
i have found that its a connection problem..
the touch pad is very all over the place if used normally (so basically its unusable)
but if i hold down the top left of the phone(pushing down just above the start menu) with my left hand and use my fingers on my right.. the phone works perfectly again..
does anyone know how to fix this?
its so frustrating, especially knowing im going to be without it for 3 weeks or more again
hmmm ...
i heard that the radio-part is for managing the curcuits.
try an other rom.
but i cant give garanty, i hard it only.

Diamond: some production series better than others?

I just got my Diamond back from repairs and wanted to compare experiences:
1)
I first bought a Diamond two months ago. It came with 1.37 ROM series on it, the screen wasn't too yellowish, but touch function wasn't responsive and the GPS was a MESS!
(of course, I tried many ROMs official and unofficial, almost every Radio ROM and various Hard-SPL. None of that fixed the problems.)
I could cope with with the other flaws, but I just couldn't bear my GPS wasn't getting a fix, no matter how much sattelits were in view...
It worked at first, but soon started to display '66666' instead of the location and finally, it would never display any location again.
I tried every tips and tricks and softs, it helped giving me more and more satellits in view and apparently active, but at the end my crappy GPS could never turn the datas received into a proper location...
2)
I sent my device back to warranty (after flashing back to official ROM and SPL) and had to wait for about a month.
(the technician at first tought I was just a noob unable to set his phone properly, but after two days of attempts, he had to admit that there was something wrong with my phone and sent it to the the headquarter for replacement of motherboard and so on.
3)
The new phone I got came directly with 1.93 ROM and a little bit more yellowish screen, though, there is no spot or stain on it. So the coulour doesnt bother me.
But from the beginning I noticed the new phone was much more responsive even at the slightest touch.
From the first try, the GPS got a fix in about 1 mn time, with only 3-4 satelits in view.
I installed Hard-SPL and the latest Australian Official ROM, and though the screen seems now a little less responsive than before, the GPS is still working, fine.
I'm a VERY happy user of Diamond now, but I'm still wondering one thing:
it looks like once the warranty technicians understood that I was very demanding about quality and complete functions, they took time but gave me a phone totally different in terms of behaviour and quality of the components sensitivity of screen, GPS etc.
Is there some bad production series that they never tells publicly about, and much more better series that they give you as a replacement once they understand you will bother them until the end of time if you are not satsified?
Plz tell your experience about having received two new diamonds with totally different behaviour and quality of the components.
I guess you are totally right!!!
My first device was pealing paint in the aluminium frame on the second day, work very good by the way.
Now i´m on the second device and i my hardware keys, especially the call button is sometimes irresponsive and i have to push it several times to enter the dial.
Tried cooked rooms as well, and the call button issue still remains, so i´m a little unhappy with my diamond experience.
I've noticed that whenever i turn on my display after having left the diamond unused for sometime the lcd doesn't switch on smoothly, what i mean is that it first displays a grey pattern(only for a ms or so) and then the desktop( lcd off>>grey flash>>desktop). Usually the transition from off to desktop is quite smooth, but in my case its not!
Is this a s/w issue or h/w ?
I've never experienced that particular problem myself, but sounds like H/W problem to me...
just been through a couple of other threads related to the grey screen of death...i've had it once...it happened while i ended a call, had to soft reset to resolve it.
take a look at the grey screen of death i'm talking about
Pretty scary indeed!
It might not be a coincidence that you experienced both: grey transition when switching on the screen and once, the grey screen of death after a call...
Two different effects of the same defective part in your H/W?
a solution!, almost
untill now i've had auto brightness control switched off and the brightness was set to minimum to save battery life, but now i just tried switching on auto adjust backlight and the problem seems to have vanished.....coming out of standby is smooth as ever!
although i've to say that i don't quite understand the logic behind it.
*EDIT*
it doesn't help for long
blufade said:
a solution!, almost
*EDIT*
it doesn't help for long
Click to expand...
Click to collapse
This is what I was worrying about...
Your method sounded like a work around to avoid the display failure. But as a matter of fact, there must be a reason for the display to fail. (bad screen, power supply or something...)
By the way, I'm more and more convinced about my assumption that there are bad production series and better ones:
Today I had my device connected to my PC through USB for a couple of hours. In the meantime, I was downloading and deleting messages, watching google video on opera, after that I used wifi etc.
In this situation, my first Diamond would have got hot like hell and my hand could barely stand the pain...
Since many people were complaining about over-heat problems, I thought that was a common problem with Diamond.
But the new one did not get that hot. Just a little over-warmed, but definitely not too hot. From that phenomenon, I can see what I felt about a better touch-flow behaviour, a better GPS and so on is a part of a whole:
I was first sold a ****ty phone, and now I finally got a proper Diamond!
People with bad series, you don't have to cope with all those troubles, ask for a replacement phone!
my diamond gets heated up quite a bit at times....but i dont fully uderstand what exactly is the cause.....i've had experiences with the diamond getting pretty hot while using wifi & or gps and on another occasion i was watching a DVDRIP via wifi(@ full power) using core player and also with gps cycle running in the backgroud, still the diamond stayed well within reasonable limits.
i think it has to be a software problem, possibly the radio s/w
would you mind sharing the radio version of your diamond?
As written in my signature, I'm using the 1.00.25 which is included in all latest official ROMs.
By the way, I hope you did not cast a spell on me! (just kidding)
Today I experienced my first grey screen!!!
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Just for one second, looking like an old black and white TV screen trying to tune on channels.
Hope that was the first and last time. In ordinary calls, (without being synchronized to the PC at the same time, it never happened so far...
sorry to hear that my friend
My Diamond was connected to the PC through USB cable, downloading e-mails, and I got a phone call. When I hung the phone, It suddainly happened, for the first time in my Diamond user carreer!
Click to expand...
Click to collapse
I'd the same experience except for the fact that my diamond wasn't connected to a PC.
I hard reseted my diamond yesterday, but the grey splash while i turn on the display from standby(post 3) still exists ( ......i don't suppose its a software problem anymore.
blufade said:
i don't suppose its a software problem anymore.
Click to expand...
Click to collapse
Why not trying to send it back to the seller and get a new one?
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
This problem is easy to demonstrate to the technicians, and I don't think they will be cheeky enough to say that's a normal phenomenon!
Click to expand...
Click to collapse
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
blufade said:
not that easy.....the thing is that if we turn on & off the lcd without a gap of atleast 4-5 min(dono exactly) i dont see that grey splash
i think im going to wait another 3-4 months before i approach for warranty.
Click to expand...
Click to collapse
You can stay there and wait for 5 more minutes in the shop while they are attending other customers, just to proove your point.
If they are honest, they will not deny the fact!
foxium said:
I had that "gray splash" problem with my Kaiser and Diamond.
Hard reset also didn't work like above. For both devices the fix was simply flashing to a different (cooked) ROM.
Click to expand...
Click to collapse
knave said:
As mentioned in another thread, the grey screen problem was fixed (as least for me when I flashed to dutty's rom)
Click to expand...
Click to collapse
There might be some tweaks in the cooked ROMs that avoid the problem, or it might be due to some bad flashing or defective hardware.
If not, how do you explain that I've never experienced this with my previous HTC phones (wizard, Trinity...) nor I experienced it with my Diamonds (the first one and the new one) with stock or cooked ROMs.
except for that very special time, when I received a call while downloading messages through Active Sync.

How to stop startup vibration?

How to stop startup vibration? I detest this feature very much! help!
Im sorry to report I can't really help you with this as im no real genius on the matter but im guessing it may be due to some sort of P.O.S.T response on the device similar to the beep you here on some older pc's and laptop's. If so it may be easier for someone to find the right registry entry to change. Then again I may be talking out of my backside. Good Luck!
yinyfxda said:
How to stop startup vibration? I detest this feature very much! help!
Click to expand...
Click to collapse
Are you talking about vibrate on connection ?
Start> phone> menu>options> advanced> uncheck vibrate device when connection is established.
He's talking about when you turn the device on..
I think he's talking about the vibrate when the phone boots (from a soft or hard reset, or from turning the phone completely off)
why so bother about that vibration?
What's it matter...? He still wants to turn it off....
I'd like to as well..
I means how to stop power-on vibration or hard or soft startup vibration. anyone has already stop the vibration, it's really boring!
i would actually be interested in that as well, i have my phone setup to automatically reset itself every day at 3 in the morning, and the vibration from the reset sometimes wakes me up.
yea, i dun like the vibration either.. But i doesnt make a very big deal though
My phone feels shaking , something loose from vibrating effect.
morizq said:
why so bother about that vibration?
Click to expand...
Click to collapse
It is decreasing the battery life time , maybe not much for 1 boot.. but if you boot 20 times in a day.. ( god may know why ) Than it would be handy
freaknormel said:
It is decreasing the battery life time , maybe not much for 1 boot.. but if you boot 20 times in a day.. ( god may know why ) Than it would be handy
Click to expand...
Click to collapse
I think the booting itself will require more power than the one short vibration at the beginning
Cryonic90 said:
I think the booting itself will require more power than the one short vibration at the beginning
Click to expand...
Click to collapse
the vibrating sure isnt helping the battery life either and i would like to disable this also. 10+ resets a day here and each time it vibrates my wife thinks someone is texting me! lol
Additionally, can anyone help get rid of those red numbers during boot-up?
I know that's an obnoxiously complex task that may be impossible for seemingly little payoff, but consider:
1. They prevent using the entire display for splash images, unless you want it covered up for part of the time,
2. My friend is color-blind, and won't be able to tell if they're red, green, or purple - I don't want him to not be sure,
3. They could attract a bull, if you waved it around accidentally in Madrid,
Etc.
I'm sure you can tell there are no shortage of reasons.
Anyone have any ideas?
mikentucson said:
the vibrating sure isnt helping the battery life either and i would like to disable this also. 10+ resets a day here and each time it vibrates my wife thinks someone is texting me! lol
Click to expand...
Click to collapse
If you're SR'ing 10 times a day, it's time to fix something on your phone.
khaytsus said:
If you're SR'ing 10 times a day, it's time to fix something on your phone.
Click to expand...
Click to collapse
i probably flash just about every new rom thats posted in the rom section. that and i've been testing the android builds that get released

Strange problem, TD locked with black or VERY strange screen...

Since a week or so I've had some minor problems with my Diamond.
First after a couple of hours with no use, I saw the led blinking (hey, a new text messag, let's have a look) and the phone wouldn't wake up.
Even pressing the power button for a long time didn't make a difference, I resorted to taking out the battery and restarting it that way.
Everything was back to normal after turning it back on so I didn't really worry about it.
Until this weekend, I tried to wake it up from standby and the screen looked euhm... rather strange
I made a picture of it (please have a look at the attachment). In this state it didn't respond to any button, not even a long press of the power button.
While I was putting back my camera this screen disappeared and the normal touchflo was back, but still the device didn't respond to anything.
So again I resorted to removing the battery and everything has been fine eversince...
But now I'm a bit worried... Anyone have any idea what might be causing this? I must say it's been quite warm in my house the last week (about 27C) so I can imagine that temperature could have an effect...
Thanks for any suggestions.
Oh, I almost forgot..
It's a stock Dutch Diamond.
The latest ROM (2.03.404.3 NLD)
Radio 2.09.25.23
Protocol 52.51.25.26H
That's a cool screen saver!
defaria said:
That's a cool screen saver!
Click to expand...
Click to collapse
It sure is
My first thought was: Oeh! Capture it!!
But I couldn't start the screencap program because well... the screen didn't really work
I have seen too this strange screen in my Diamond a couple of times, but I couldn't tell the reason. I was forced to reset the device as well.
I'm curious about the reason, any ideas?
JavierV said:
I have seen too this strange screen in my Diamond a couple of times, but I couldn't tell the reason. I was forced to reset the device as well.
Click to expand...
Click to collapse
Has your Diamond been functioning normally after that? Or has it developed more problems (and has perhaps been repaired)?
I'm a bit worried that this is the beginning of major problems...

Categories

Resources