help me...
i cannot get into the debug mode(i use a german xda 3)
i just install windows mobile 6, than i hard reset.
now i only see the colored schreen.
in the left corner stand:
R1.10.00
WHAT CAN I DO NOW ???
you mean... bootloader mode.
press Camera+PowerButton then stick SoftReset.
then reflash your ROM.
bootloader did not work also on my BA with camera+power+reset
in the wiki i found camera+record+power+reset... sounds funny, but worked for me
have you update the radio rom ?
Related
Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
DerGregen said:
Hello,
now the time is come that I really need your help.
Everytime when I try to turn on my MDA Vario 3 the system is crashing after the Bootscreen. I could do nothing exept turn of the device.... I already tryed it with a lot of hard and soft resets but it still wont work.
When the PPC is connected to my PC its going to freeze in the main menu from Active Sync (I dont know why this pops up even before I could enter the PIN code)
and when the device isn't connected to the PC the system is going to freeze in the HTC Home screen (at the point before you enter the Pin code normaly).
I also couldn't flash the rom because even wehen Active Sync pops up the device could not connect to the PC...
So when somebody have an Idea which coul help me, just let me know!
PS: Sorry for the bad english
Click to expand...
Click to collapse
Flash from bootloader. Make sure you're hard SPL though, or that it's a compatible ROM for your CID.
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
manuv1615 said:
have you tried:
Start->Settings->Connections->Usb to PC and clear the 'Enable advanced network functionality' checkbox ?
Click to expand...
Click to collapse
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
DerGregen said:
Hello,
I could not try this option because I couldn't do anything exept restart/turn off the device.....
Now I found out that I can flash the Rom with the bootloader but the problems still where the there with every rom... And I tryed a lot...
After the 3. or 4. restart with the new rom the problem pops up again....
Click to expand...
Click to collapse
You said that you could enter bootloader menu right?
now tell me, whats written there?
i'll wait here,.
Theres a 4 colour screen (red, green, blue and white)
And in the red bar is a text with a yellow font:
KAIS139 MFG
SPL-1.0.0liPof
CPLD-8
And below in the withe bar stands "Serial" or "USB.
What rom did you use?
try HardSPL 3.56 by jockyW,.
then reflash your ROM,.
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
u prob. d/c ur cable when you were flashing a rom
this happened to me
the solution for me was to just reflash a rom
Hello,
sephiroth_vg said:
Hey guys i have a Imate k-jam..but its stuck like hell..i mean i tried just about everything i could to get it out of bootloader...whenever i press the power button the phone just automatically goes into bootloader mode..and nothing loads..i tried buttons roms..but it stuck at 98%..den i tried the other rom in a walk thorugh and it upgraded and changed my IPL from 1.01 to 1.06 (SPL is the same 1.01) so what should i do? I tried to install a official rom from Imate support but it says that it cant be installed in my device ..i even tried the SD backup method but it doesnt work as well and the app (on computer) just hangs even though it shows the table and other allocations.. PLZ HELP!
Click to expand...
Click to collapse
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!
eXPLOiTeD said:
Do this:
Step 1. You`re phone is in bootloader mode (3 color screen) ok? Connect your phone to PC.
On Desktop go to My Computer icon -> Right Click -> Select Manage from the list.
Computer Management -> Select Device Manager.
On the bottom of the list you must have Windows CE USB Devices, if it`s there then you`re phone is connected! If you`re phone ain`t connected please right click on Human Interface Devices, and click on Scan for hardware changes!
Step 2. Go to http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades and get the Aku 3 Official ROM and flash it to you`re phone. (T-Mobile UK 3.8.2.1 WWE (AKU 3.3 & 3.0) OS:3.8.2.119 Radio:02.69.11)
In case you don`t have battery more than 50%:
Step 3. Let`s charge it! Phone must be off. Put the charger in... and hold the power button until you`re phone starts charging. It take`s about 10-15 seconds. Max. 30 seconds and some times 1 minute.
If this doesn`t help you, please do this again: http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Regards! & Good Luck!
Click to expand...
Click to collapse
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)
Hello, Maybe this helps....
sephiroth_vg said:
the phone doesnt giv any nidication tht its charging...and when i connect it the ruu doesnt detect the phone (it is shown in device manager though)...and my device is CID locked (aka no chnages made to anything since it was bought).. the only indication that its charging is that the mobile gets a bit hot after a while..and i guess that means its charging..
also the upper right hand corner there is ruu or rru written in the corner..(in bootloader)
Click to expand...
Click to collapse
ok... if it`s shown in device manager the the phone is detected by the PC that`s in bootloader mode and connected....
If your phone is CID locked... i have to flash to a official IMATE K-JAM ROM.... you can` find some here... http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
And when you try to charge the phone... orange light must apear, if you say that it don`t indicate... then i think it doesn`t charge...
Regards & Good Luck!
man sadly no orange light.....the screen just turns white when i plug it in...sometimes even that doesnt happen...but a VERY RARE (2 times) the red light flashed for just a fraction of a second...and the links for imate roms are dead..i tried access to the ftp site and there is nothing left in the imate folder at all...anyways..i tried to flash the rom from imate website...even that wouldnt flash..says phone not detected..
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
mfesenko said:
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
Click to expand...
Click to collapse
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
denco7 said:
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
Click to expand...
Click to collapse
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
mfesenko said:
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
Click to expand...
Click to collapse
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
denco7 said:
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
Click to expand...
Click to collapse
Nope, it just does a regular soft reset , and back to the same screen
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
JugglerLKR said:
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
Click to expand...
Click to collapse
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
mfesenko said:
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
Click to expand...
Click to collapse
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
mfesenko said:
Nope, it just does a regular soft reset , and back to the same screen
Click to expand...
Click to collapse
Keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
JugglerLKR said:
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
Click to expand...
Click to collapse
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone.
Maybe you didnt read well enough..
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone
Click to expand...
Click to collapse
YOU AREN'T BEING ASKED TO HIT JUST THE POWER BUTTON
try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to pc and see if you can run the ruu in your stock rom.
Click to expand...
Click to collapse
keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
Click to expand...
Click to collapse
THAT MEANS DO IT AGAIN !
Thanx
Thank you denco , for the info , and thanx chumley for beating some sence into me. So i got to the bootloader. Do i need to instal my original rom or can i just reinstall the one i got or maybe another one?
well I have the same problem.
It started with the edfc problem explained here
While trying to fix that problem, I switched my rom to the TPC elite rom series (windows 6.5).
All went fine till three days later, while text-messaging, the screen freezed. I removed the battery, restarted the device and found myself having the same symptoms discussed in this threat.
Putting my phone into bootloader doesn't work, and I think It has to do with the problem I had before; that apart from the directional buttons and the power button, all buttons are defunct.
Anyone any suggestions? (apart from: don't bother us, etc, etc...)
my phone randomly bricked too a while back....as far as I understand is that either you CAN put your phone in to bootloader or your phone is junked....correct me if im wrong ppl
.....make sure you hold the camera and power buttons then reset with stylus....
and make sure you install your stock rom...aka the att tilt rom
if you didn't do it already...
1. flash your original rom (SD card method - Step 5 Flashing Via MicroSD Card ) you need the rom to be at least from the same operator. it should run just fine, just as long as you follow the directions.
2. HardSPL,SIM CID unlock, etc. as described on the same forum i pointed to a little earlier. from this point on you should have a phone just like it was when new.
try to read more carefully (maybe a few times) and search before you start a new thread.
on the wiki and in the stickies in the rom development section you get a lot of "bricked" solutions. you just have to read them all and see what is your case...
Hi everyone.
Ive got a MAJOR Problem here.
My Cell Phone doesnt start at all.
If i put it one the USB Cable it can Start up like 5 Seconds.
Then it Reboots and Reboots again and again by 5 Seconds.
If I Disconnect the Phone from USB screen turns Black Immediately...
I thought it could be the Batterie... but.. it worked just fine yesterday..
(have i Mentioned that this weird Sticker on it turned red..? Some kind of sign saying me it got wet?)
All this started as i got a Coloured screnn with saying ´´Serial´´ @ the bottom of the Screnn... just exact like the Flash Screen
I Flashed the Rom which is on the Internal Storage i put bevor. To bad it aint the Stock ROM!
Then i also tried Hard Reset.
But everytime i boot... i only get as far as 5 Seconds.
Is there any Chance to Flash this Baby with original ROM (Stock ROM, RADIO and SPL)
I want to send that Baby in... but if they find out i Flashed it... i wont get any Warranty... ;(
So PLEASE GIVE ME ANY ADVICES!!!!!
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
krisztian b said:
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
Click to expand...
Click to collapse
You only can Flash if u got a Active Sync connection.
So ... Cell cant boot... i cant flash...
HELP
Just go into bootloader mode (you have Hard SPL installed right?) by booting up the phone while holding down the volume down key. Then connect it to the pc with the USB cable and run the CustomRUU to flash another rom. Should work! Else you should try to MTTY (that solves the resetting stuff right?).
I was just about to say to try to get Diamond into bootloader mode manually. http://forum.xda-developers.com/showthread.php?t=405659
MTTY wont work... cause i cant boot at all
But THX for your help flashing it back to Original...
This Thread can be closed
I need to install the original ROM for Diamond I from boot loader beacuse the device can't make Sync. with my computer
alright well you need to get the .nbh file of the rom into your storage memory (in da main root not in any folder) and then rename it DIAMIMG once you have that turn off your phone and press and hold the volume key down and press and hold the back button ( the button on the pad to go back) and press and hold the power button until it turns on into bootloader mode . now if it worked it should ask to press power buttton to update or ok to cancel just press the powerr button and itll update when its done itll say update ok and u can restart the phone
thankes for your thread but i have aproplem because my phone cant make a sync. with my computer and i have anther thread with my proplem please read it and reply me
It doesn't need to sync.
Put the phone in bootloader as lokoz described and run one of the ROM installers. You don't even need to have the ROM in Internal Storage that way.
Will the newest original rom be better.
Hello dudes, I have a question, My htc touch diamond are not so touch friendly as i thought when i bought it. I know that it aint a Iphone but do you guys think it might get to be better with the newest ROM from HTC homepage.
Like when i want to call a number and press number 1, its says 2 instead.Thats kinda irritating.
But anyway, I have downloaded the newest rom for my touch diamond, ver 2.03. the one thats on my phone is 1.93. but when i try to install.. i get an 264 error, and it finnish without installing the ROM. Can I still install it ,Like if I put it into storage in the phone first and the install it from there.
Thankfull for any help
Try my rom in my signature. Its about as finger friendly as it gets. FIRST look up on how to prepare your Diamond before flashing, there are some important steps. If you need a link, PM me.
Sent from my XDANDROID using the XDA mobile application powered by Tapatalk