How can install original ROM for Dimaond I? - Touch Diamond CDMA

I need to install the original ROM for Diamond I from boot loader beacuse the device can't make Sync. with my computer

alright well you need to get the .nbh file of the rom into your storage memory (in da main root not in any folder) and then rename it DIAMIMG once you have that turn off your phone and press and hold the volume key down and press and hold the back button ( the button on the pad to go back) and press and hold the power button until it turns on into bootloader mode . now if it worked it should ask to press power buttton to update or ok to cancel just press the powerr button and itll update when its done itll say update ok and u can restart the phone

thankes for your thread but i have aproplem because my phone cant make a sync. with my computer and i have anther thread with my proplem please read it and reply me

It doesn't need to sync.
Put the phone in bootloader as lokoz described and run one of the ROM installers. You don't even need to have the ROM in Internal Storage that way.

Will the newest original rom be better.
Hello dudes, I have a question, My htc touch diamond are not so touch friendly as i thought when i bought it. I know that it aint a Iphone but do you guys think it might get to be better with the newest ROM from HTC homepage.
Like when i want to call a number and press number 1, its says 2 instead.Thats kinda irritating.
But anyway, I have downloaded the newest rom for my touch diamond, ver 2.03. the one thats on my phone is 1.93. but when i try to install.. i get an 264 error, and it finnish without installing the ROM. Can I still install it ,Like if I put it into storage in the phone first and the install it from there.
Thankfull for any help

Try my rom in my signature. Its about as finger friendly as it gets. FIRST look up on how to prepare your Diamond before flashing, there are some important steps. If you need a link, PM me.
Sent from my XDANDROID using the XDA mobile application powered by Tapatalk

Related

HELP My P4350 is not responding!!:eek:

Can anyone help me, while updating my rom there went something wrong, i guess!
Now I only see the screen with 'Touch-IT' and I don't know what to do! Please help me!!
Thanks a lot! Bram
this guide really helped me when i started flashing
bramwillems said:
Can anyone help me, while updating my rom there went something wrong, i guess!
Now I only see the screen with 'Touch-IT' and I don't know what to do! Please help me!!
Thanks a lot! Bram
Click to expand...
Click to collapse
PAY SPECIAL ATTENTION TO STEPS 3. 3A,3B,3C...
1. Download which version of Touch IT you want. For the Last version made, here is the link: http://forum.xda-developers.com/showthread.php?t=340403
2. Backup any information you wouldn't want to lose. Either backup to memory card or PC; your choice
3. At this point, You need to install the official RUU for your device, if you're already running the official RUU, then you need to hard reset your device. (Press and hold both soft keys and press reset button, continue to hold softkeys til screen displays to hard reset. Press the call button to continue). If you need to install the official RUU, continue to step 3a4Here is a list of uploaded RUUs
3a. Enter bootloader on your phone (Hold camera button and press reset, continue holding camera until a screen with 3 gradient colors shows up
3b. Connect your computer via USB to your ppc (Pocket PC)
3c. Run the RUU .exe from your hard drive, follow its simple onscreen instructions and click check boxes necessary to continue with the installation. This should take a few minutes, and you will more then likely see your screen flash and change things, this is normal, let it work. After a few minutes it will boot up and go into "automatic customization of your device", I continued this (screen alignment, tips, auto setup), and waited for my device to be totally ready for me to use.
4. Connect your device via USB to the PC and wait for activesync. If it automatically pulls up a profile for your phones sync, delete that profile. If it asks again to setup device for syncing items, click cancel. You will still be able to explore your phone and install devices without setting up the sync profile for your phone.
5. Make sure your phone is connected as a guest, if it is not, make sure it is. The method I used to do this was this zip file I ran "guest only" registration entry. (Make sure and run allow partnership registration after completing installation), but it should display as guest after the hard reset.
6. Copy aserg policies.cab to your mobile device
7. Run aserg policies.cab from your device
8. Soft reset (use stylus for button on side of wing, or on bottom of herald)
9. Go into your comm manager on your phone, and disable "phone". Basically enter flight mode so nothing can be sent to your phone during this process.
10. Once booted, its time to give it a shot. Make sure you're still connected as guest, and run !Upgrade_rom.bat from Touch_it folder on your PC
11. This will bring up a command prompt waiting for you to hit a key to begin, press any key
12. During this time it is installing, NEVER touch your phone or play with it in any matter. It may look as though the command prompt has gotten hung up at times, but leave it run until it completes (or fails). your phone will pop up a message saying "unknown status" or the likes, but dont close that window, like I said just leave it alone.
13. If you have no error messages in the command dialogue box then you're ready to hard reset your phone. (press both softkeys, and press reset, continue holding softkeys til you see a dialogue asking if its okay to restore settings, hit the call button to finish it)
14. Your device SHOULD boot normally, go through setup, and you should be golden.
If at any time there is an error during install, but you still let it complete, you might have a chance at it working. Hard reset it after completion (even with errors) just to see if it works. If it wont go past your Tmobile or HTC picture screen on bootup, then you have bricked your device. To UNbrick it, run steps 3a through 3c and reinstall the RUU.
If you get any errors, try and try again. Its proven working on several devices.
thank you very much for your help, but i cant find the offical RUU?
bramwillems said:
thank you very much for your help, but i cant find the offical RUU?
Click to expand...
Click to collapse
You defenitifly flashed a rom from teh HARD-SPL RUU folder...
... or you left a SPL.nbh inside your RUU folder.....
All roms are found in my signiture "All roms"
And for better flashing... download latest TouchIT6.1.3 and replace the RUUsigned.nbh with a one you will flash.
Or flash the TouchIT 6.1.3
I know hardspl sorked for you.
If flashing isn´t working
PUT device in BOOTLOADER (cam + softreset) then it MUST work
Good luck
papamopps said:
You defenitifly flashed a rom from teh HARD-SPL RUU folder...
... or you left a SPL.nbh inside your RUU folder.....
All roms are found in my signiture "All roms"
And for better flashing... download latest TouchIT6.1.3 and replace the RUUsigned.nbh with a one you will flash.
Or flash the TouchIT 6.1.3
I know hardspl sorked for you.
If flashing isn´t working
PUT device in BOOTLOADER (cam + softreset) then it MUST work
Good luck
Click to expand...
Click to collapse
Thank you papamopps! I run the HARD-spl again and my phone is fully functional!
I was very afraid that I my phone was totaly crashed and I could thrown it away! Thank you for saving my dear phone
bramwillems said:
Thank you papamopps! I run the HARD-spl again and my phone is fully functional!
I was very afraid that I my phone was totaly crashed and I could thrown it away! Thank you for saving my dear phone
Click to expand...
Click to collapse
Since NOW - never use HArd-SPL again...
Take the RUU from TouchIT6.1.3 or any other official RUU WITHOUT SPL.nbh!!
and enjoy free flashing .....
papamopps said:
Since NOW - never use HArd-SPL again...
Take the RUU from TouchIT6.1.3 or any other official RUU WITHOUT SPL.nbh!!
and enjoy free flashing .....
Click to expand...
Click to collapse
But on the releases from Itje there is a note that is won't work without HARD-spl? So what is the difference? (I don't know if I ask stupid questions, forgive me)
If you have used hard-spl once on your phone, you dont need to do it again
I include in my rom releases what u need to flash
just run the rom.exe file, and the phone will update.

How to install a rom please help

I am trying to install a rom to my wing from over 3 days couldn't do it , I need to know where to put the files and how to set the files up , This maybe easy for you but not for average person like me , Please help.
reply
sorry i dont have a answer for you.but, i feel your pain i am going through this same stuff and i is pissing me off. i had my friend do everything but he is getting pissed off now because i keep calling him on ****. i need help too.
Well, we need to know what you are doing first!
What ROM are you flashing?
Do you have HardSPL already on? Or do you have no idea? haha
Thanks for your respond , I will like to install ROM HERALD WWE 6.1 BUILD 20764.1.4.3 (Blue clear) , I have no idea what is HardSL !! but i will learn if you give me a little direction .
tazzam72 said:
Thanks for your respond , I will like to install ROM HERALD WWE 6.1 BUILD 20764.1.4.3 (Blue clear) , I have no idea what is HardSL !! but i will learn if you give me a little direction .
Click to expand...
Click to collapse
How to Flash HardSPL
1) Find out your IPL
-- Do a Soft Reset (Push Button under volume w/Stylus)
-- While doing Reset, hold the Camera button, it should bring up the Bootloader menu and list your IPL (I think, it has been a while since I haven't been running HardSPL)
2) Verify your IPL is 4.xxx or Higher!
3) Boot your phone Again
4) BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox
5) Download HardSPL:
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
6) Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
7) Soft Reset again
8) Run ROMUpdateUtility.exe
9) screen will become white - WAIT until it reboots itself (Should be like 10-15 min)
10) Phone will boot back to your main ROM
11) Soft Reset, Hold Camera button, check if SPL is 4.70.yang
Okay, now HardSPL is on
12) Download Your ROM
There are 2 ways of doing this now, either
1) Run ROMUpdateUtility.exe - When finished, go to Step 8.
-OR-
2) Put RUU_signed.nbh on your SD-Card and call it HERAIMG.nbh
3) Soft Reset, hold the Camera button
4) It will say: PRESS KEY TO INSTALL or something like that...
5) Press the volume button down or up
6) The ROM should begin to Extract/Install
7) When it finishes, do a Soft Reset
8) You should have your new ROM now!
Good Luck!
Original HardSPL Thread:
http://forum.xda-developers.com/showthread.php?t=358225
Thanks will try now
I followed the instructions, however when I turn on the phone holding down the camera button I get a white screen that states searching for SD Card (the white screen disappears quickly) then a new screen with RED, Green, Blue, White stripes with the IPL & SPL INFO, there is no option to press up to install the ROM. The ROM is in the Root of the Storage card named written as such in your walk through.
Tom in AZ said:
I followed the instructions, however when I turn on the phone holding down the camera button I get a white screen that states searching for SD Card (the white screen disappears quickly) then a new screen with RED, Green, Blue, White stripes with the IPL & SPL INFO, there is no option to press up to install the ROM. The ROM is in the Root of the Storage card named written as such in your walk through.
Click to expand...
Click to collapse
What size Card are you using?
I cannot get my 4GB or 8GB Card to flash... I have to use a 2GB card (I think it is SDHC Drivers not loading in BootLoader)
That is most likely your problem.
Try to get a hold of a smaller one (Maybe borrow one)
Fenopy said:
What size Card are you using?
I cannot get my 4GB or 8GB Card to flash... I have to use a 2GB card (I think it is SDHC Drivers not loading in BootLoader)
That is most likely your problem.
Try to get a hold of a smaller one (Maybe borrow one)
Click to expand...
Click to collapse
I had a 4gb in there, so that might be part of the problem, as time went on there was more going on it seemed. I finally got it to go back to that flash that came with the HardSPL software.
In order to do it, I started off by taking your advice. First I put in an older Lexar 2gb chip into the phone (Non-SDHC), then re-installed the three cabs that come with the hardSPL (installing them to the device, not the SD card). Then had to put the phone into the mode with the 4 different color bars (press and release the soft reset button while holding down the camera button till the bars showed), and finally I started the RUU from the PC since it still did not see or take the NBH file off of the root directory of the 2gb Micro SD.
I hope it does not get flippy like that again. The darn phone was deleting its own files as it was unhappy on the last build. Thanks for the tip on the SD swap. I'll be sure to keep that in my bag of tricks should it happen again.
Tom
where do i transfer the files to on the phone how do i install them
hankf said:
where do i transfer the files to on the phone how do i install them
Click to expand...
Click to collapse
HERAIMG.nbh go on the Root of the SD-Card.
All instructions are right in this thread:
http://forum.xda-developers.com/showpost.php?p=3321535&postcount=5
these files go to the root of the sd card: Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
Thanks for the help super n00b have been reading but still lost dont want to mess my phone up once I hard sl my phone can I still run my old rom or do I need to install a new rom right away
mmmm...
Damn Phone...
hankf said:
these files go to the root of the sd card: Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
Thanks for the help super n00b have been reading but still lost dont want to mess my phone up once I hard sl my phone can I still run my old rom or do I need to install a new rom right away
Click to expand...
Click to collapse
Those CABs can go anywhere. You need to put them somewhere (root of the SD works for simplicity)
So put the CABs on the root of the SD Card
Use File Explorer or Total Commander (Whichever you have on the phone) to navigate to your SD Card and run the 3 CAB files (Order does not matter) - Install them to the phone (Not the SD Card)
Then run the Installer from your PC as stated in the instructions.
*Note: Installing HardSPL will also install a New ROM (It is some old version of PDAViet I think)
As for installing your old ROM again, you would use a different method.
Similar to installing HardSPL, there is a PC-Based installer for the stock ROM, this ROM will revert you to T-Mobile default OS and back to SoftSPL.
I can upload this ROM later when I get home if you would like...
I think i got the CAB part understood.
When I do the HARDSPL I should have a ROM ready to install correct may I ask what you reccommend I have never used any of them so all new to me.
Could you please upload the stock rom to revert back to t-mobile, the installer and softSPL or what ever I need.
hankf said:
I think i got the CAB part understood.
When I do the HARDSPL I should have a ROM ready to install correct may I ask what you reccommend I have never used any of them so all new to me.
Could you please upload the stock rom to revert back to t-mobile, the installer and softSPL or what ever I need.
Click to expand...
Click to collapse
I would have the ROM you want ready, otherwise you would be stuck with the HardSPL ROM (Which you probably don't want to use)
I would suggest Just2Clean.
It is customizable & fast. (Can be found in the ROM Dev forum)
Stock ROM:
http://www.mediafire.com/?2nq9iu0a2nt
so with the stock rom I can go back to my t-mobile theme at any time or do I need to get rid of the HARDSLP first?
1 more question my phone is Windows Mobile 6 Pro so do I need to stick with wm6 rom or can I do like wm6.1
hankf said:
so with the stock rom I can go back to my t-mobile theme at any time or do I need to get rid of the HARDSLP first?
1 more question my phone is Windows Mobile 6 Pro so do I need to stick with wm6 rom or can I do like wm6.1
Click to expand...
Click to collapse
The Stock ROM installer puts SoftSPL back on the phone.
Windows Mobile 6.1 is just modified version of Windows Mobile 6.
It doesn't matter.
got the phone HARDSLP tried installing rom just2clean of the sd card having the same problems as in post #7 tried different size microchip 2gig with no luck so i installed touchFLO 2d and now my phone just keeps rebooting tried connect back to the pc but it sees no phone any ideas
hankf said:
got the phone HARDSLP tried installing rom just2clean of the sd card having the same problems as in post #7 tried different size microchip 2gig with no luck so i installed touchFLO 2d and now my phone just keeps rebooting tried connect back to the pc but it sees no phone any ideas
Click to expand...
Click to collapse
Try using Flash Center (http://rapidshare.com/files/202330180/Flash_Center.rar.html)
1) Put the phone in BootLoader (Make sure it says SPL 4.70.yang)
-- To get in BootLoader: Do a Soft Reset while holding down the Camera Button
2) Put the ROM in the 'RUU' folder (Name it anything [No spaces/special characters]) and try flashing using ROMUpdateUtility
If SPL is not 4.70.yang:
Try Re-Flashing HardSPL
If it won't stay connected long enough to flash (Gives an error upon flashing)
- When the Phone reboots itself, try holding the Camera button again, it sometimes will keep going
If you STILL can't get it going..
- Search desperately for a different SD Card (Make sure it is formatted in FAT32/FAT16)

How to upgrade from Orange ROM ??

Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.
Crackwhore wrote a guide for this, at top of forum
http://forum.xda-developers.com/showthread.php?t=505377
I used Crackwhore's guide too for my Orange HD and it worked perfectly with HSPLWrapper_Blackstone_156OliNex.zip allowing me to flash Duttys ROM which is excellent.
I even followed his instructions to roll back the SPL to test incase I ever needed to get the phone fixed under warranty, and it worked.
Flashing Orange Touch HD
bilalperwaiz said:
Bought my HD a month or so back, it's an Orange HD and has the factory Orange ROM. Can ANYONE please direct me on HOW to upgrade to the latest Original ROM , OR one of the cooked ones, as I have no idea how to, don't wanna brick my phone.
I had an HTC Advantage before this and sold it to buy this, upgraded that with cooked roms, I need directions on how to upgrade SPL to 1.56 or above and upgrade ROM likewise. Help will be much obliged.
Click to expand...
Click to collapse
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING
Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for
digo21 said:
Thats really great, thanks for the help guys.
By the way im a noob, what does SPL stand for
Click to expand...
Click to collapse
spl is similar to the bios of ur pc...
hispeedworm said:
hey I have Touch HD of orange n right now im using Duty’s v3.9XT n its SUPERB on it.... I can simplify the procedure for u.it will be for both official rom upgrade and for putting any cooked rom without bricking ur phone... first ill write it down in outlines n than write the detail u need as being owner of orange touch hd device....
here is wht ul have to do.
1. Download relevant stuff.
2. install relevant drivers and USPL software on your pc
3. update your current orange rom to official updated rom.
4. Download and install any cooked rom.
here are the details....
Orange shipped touch hd's have SPL ver1.14000 in them. SPL is the bootloader. our first task is to update the SPL from 1.14 to 1.54.... if u dont do this and directly install any cooked rom. the screen colors all mess up.....
Firstly Download these….
You gotta have the updated USB sync drivers.tht can be done from crackwhores guide.
http://forum.xda-developers.com/showthread.php?t=524619
follow it. According to the operating system you have.
When you are done installing the drivers. Restart ur pc n (incase of vista: press F8 before windows starts n from menu select disable signature reinforcement) everytime u plan to flash a new rom u gotta restart n disable the driver signature reinforcement if u had a normal reset earlier as vista on normal boot blocks these drivers.
After u have the drivers installed and working go to this link another crackwhores guide n
http://forum.xda-developers.com/showthread.php?t=505377
Download these 2 files “USPL GUI v 2.5.zip” “BlackstoneRUUWrapper.zip”
when you extract file USPL GUI v 2.5.zip your antivirus gives warning tht it is virus… its not… ignore that.
Now u have to download and install the official latest rom which works with touch HD (orange)to update your SPL to 1.54 .
go to this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
and from here download this file.
• RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship.exe
(note this rom is specific to UK devices n only this will work on orange hd…. If u download any other it will fail)
After you have downloaded and extracted the rom file. It will be named ruusigned.nbh make a new folder and in tht folder put this file and also extract that “blackstoneRUUwrapper” into it.
Now ur ready to start flashing process… for detail check the crackwhores guide to flashing. Im just writing short outline. Make sure you have at least 50% charge.
1.First turn off ur cell.
2.Hold down volume down button n press power button till u see a 3 colored screen with SPL 1.14000 n on bottom of screen there is “Serial”
3. Now connect your device to pc via usb cable. Serial will change to usb in couple of seconds.
4.Now run USPl.exe from tht USPL GUI v2.5 tht u had extracted earlier. A window will open. On tht click “RUN USPL” n in 5 to 10 secs it will run and show u message in end tht USPL loaded and happy flashing.
5.Ur cell screen will reload n now it will show “USPL1.54000” instead of “SPL 1.14000” and usb will disappear from bottom of screen. Just unplug the usb n replug USB will come up again.
6.Now go to tht folder with Blackstone RUUwrapper and RUUsingned.nbh file
7.Run tht BlackstoneRUUwrapper.exe
8.Follow the application by clicking next n checking boxes where ever needed.
9.At end it will start flashing ur rom. It takes 10 mins.
10.When finished your device will automatically restart.
11.While its doin tht unplug the usb. Remove the back cover n yank out the battery.
12.After 5 secs reinsert the battery n put on the cover
13.Now press n hold both up n down volume buttons n press the power button once.(but keep holding the volume buttons)
14.After 3 secs bootloader like screen will come up saying press vol up to restore factory settings.
15.Do tht
16.Whe finished it will say press vol up again to boot.
17.Do tht.
18.N ur done =) if u just wanted to get the latest official rom and this has updated your SPL to 1.54000 from 1.14000.
19.But if u want any cooked rom u can easily install tht following the same steps from 1. Using the cooked “RUUsigned.nbh” and u wont end up with any problems with screen colors with cooked roms….
Happy FLASHING
Click to expand...
Click to collapse
well regarding updating spl from 1.14 to 1.54 u need not install the full rom..
jus install hspl 1.56 olinex or if u want stock 1.54 then
1. dnload stock spl 1.56 from the tut thread
2. run uspl 2.5
3. wait fr bootloader to show 1.xx.uspl
4. remove and replg usb cable and confirm usb on white part
5. run hsplwrapper 1.56 olinex but do not do any thing on the ruu(wait fr files to extract in the window from where u ran the hspl wrapper)
6.copy the stock spl u dnloaded(ruu_signed.nbh) into the directory where files were extracted and allow to overwrite.
n thats all u need to get 1.56 stock..
yup u dont need stock rom if u just wanna get a cooked rom but if u want official update. thats the rom for orange sets.n do try both normal update n cooked rom of ur choice =)
Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you
bilalperwaiz said:
Thank You Very much for the replies!.. didn't expect to get so many in the time interval. Will start the process in about 2 hours , and let you know about any complications of they arise.
Once Again, THank you
Click to expand...
Click to collapse
well this is a active forum..
n ya get back if need arises.
ur most welcome man
Thanks a lot......brilliant tutorial to debrand a orange touch HD to official ROM......

Quick Question

okay. my phone reecently stopped syncing. just wondered if it was possible to flash without being synced to a pc? i have tthe nbh and ruuwrapper on my phone and would like to update my rom somhow.
thanks in advance
Dan.
If you have hardSPL on your device, or when you want to flash an original ROM, you can do so using the SD card method:
- just put the ROM file (.nbh) on the card, root dir, other files not needed
- rename it to BLACIMG.NBH
- turn off the device, hold volume down button and then press power (you should then get to see the tri-colour boot loader screen)
- it will ask you if you want to flash, press power button to flash
Make sure you have at least 30% batterypower left
Good luck. IMO, it is the best and fastest way to flash. Remember to hard-reset after flashing.
thank you very much! didnt realise i had to change the name. thanks again
Solution found, thread closed.
Can I remind you though that if your experiencing difficulties flashing/updating roms your queries should be posted in this thread. No need for new ones.
Ta
Rick

[Q] HTC KAISER - Going back to windows 6 OS

Hello friends. I 've got HTC KAISER 130.
I bought it from a guy who tried it to flash android in it. Now it is stucked in bootloop with penguin logo. Somemone can explain me how can i restore it to its factory OS. I mean windows mobile 5 or 6 OS. Thanks
You could try to set it to bootloader mode
(this white screen with "serial" changing to "USB"
when you connect it to your PC)
and then reflash WiMo Firmware.
As we don't know if this device had been unlocked
you should first use a stock rom.
edit: just found this in some android for kaiser Thread:
"Switching Back To Windows Mobile
Switching back is very easy. All you gotta do is download your favorite WinMO rom, and rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH.
Place the SD into your Kaiser and hold the Power button and camera button down, then take your stylus and hit the reset button. Follow the instructions on the screen to flash your Kaiser. When the flashing is done you should be back to running Windows Mobile."
As daddy always said: first use forum search twice, then post
I had this phone 7 years ago. Seriously why would anyone still be using it?
Why not?

Categories

Resources