Hello friends. I 've got HTC KAISER 130.
I bought it from a guy who tried it to flash android in it. Now it is stucked in bootloop with penguin logo. Somemone can explain me how can i restore it to its factory OS. I mean windows mobile 5 or 6 OS. Thanks
You could try to set it to bootloader mode
(this white screen with "serial" changing to "USB"
when you connect it to your PC)
and then reflash WiMo Firmware.
As we don't know if this device had been unlocked
you should first use a stock rom.
edit: just found this in some android for kaiser Thread:
"Switching Back To Windows Mobile
Switching back is very easy. All you gotta do is download your favorite WinMO rom, and rename RUU_Signed.nbh to KAISimg.nbh and place it on your SD card along with KAISDIAG.NBH.
Place the SD into your Kaiser and hold the Power button and camera button down, then take your stylus and hit the reset button. Follow the instructions on the screen to flash your Kaiser. When the flashing is done you should be back to running Windows Mobile."
As daddy always said: first use forum search twice, then post
I had this phone 7 years ago. Seriously why would anyone still be using it?
Why not?
Related
Iv searchd the forum first orry if i missed it i am wondering how i can flash a new rom onto my wing using the sd card. i flashed to pdaviets 6.1 rom and earlier today all my comps quit recognizing it so it wont sync up ive reinstalled active sync hard reset the phone i dont know what to do someone please help me
no one can help?
Please don't doublepost. If no one has answered they've either been sleeping like me in my time zone, or they don't know.
Place your phone in bootloader mode, by holding the camera while pressing the reset button. Then run the stock RUU from there.
sorry didnt mean to double post. even when im at the boot loader screen ot usually says that its connected by usb and right now it wont do that its wierd cause i can still charge it from the usb cord it just wont recognize my phone or something
Did something extremely stupid......
I Flashed a GSM ROM (DUTTY's 5.2 ROM) onto a Sprint CDMA phone. STUPID! I wasnt paying attention and I dunno why I did that maybe cause i saw the features on XDA and normally I'm on PPCGEEKS but now I need Help. Is there anyways of getting a CDMA Rom back on the phone. I can still get into bootloader manually. But i Need to be able to transfer a CDMA ROM to the internal Memory. Is this possible without fully booting into Windows Mobile?
Thanks for ANY suggestions!
I'm not sure, but the difference between isn't in the OS rom, but in the radio rom.
But it should be possible to flash another rom directly from the operating system with the tool delivered with almost every rom. Enter boot loader and then connect via usb.
my comp is not recognising the internal drive
pretty sure you bricked your phone
I too did this when i first started flashing my phone because i did not know the diff between GSM and CDMA , so this is what i did to fix it
1.turn the phone on to bootloader mode(tri-colour screen) to do this power the phone on while holding the the volume down key.
then
2.plug your usb in and wait for it to say usb on the bottom of the screen,
3. now flash your phone with a stock rom
this is what i did and the phone was fixed good luck post back with your results
I did the same with my phone and I burned it. I sent it to service and they change the entire motherboard.
apaquette420 said:
I too did this when i first started flashing my phone because i did not know the diff between GSM and CDMA , so this is what i did to fix it
1.turn the phone on to bootloader mode(tri-colour screen) to do this power the phone on while holding the the volume down key.
then
2.plug your usb in and wait for it to say usb on the bottom of the screen,
3. now flash your phone with a stock rom
this is what i did and the phone was fixed good luck post back with your results
Click to expand...
Click to collapse
Windows does not recognize anything when in bootloader mode. =( New phone on the way... if someone can gimme a fix for this I will pay pal them $$$...
WOOT fixed it!!!!
Using <--, vol-down, and power-button sequence:
First Bootloader will automatically try to flash DIAMIMG.rom which is still the ROM that messes up ur phone in the first place do to user error. I went ahead and let the WRONG Rom install about half way then pulled the battery. I then turned the phone back on and to bootloader screen says " Rom Upgrade Failed, Please try again..." I then plugged in USB cable and the phone detected the USB plugged in. Then went and ran rom upgrade utility via windows.... and presto! Phone fixed. Whew... I had all my contacts, pictures of kids and video all saved on internal storage. I hope this help someone as stupid as me.
I am trying to install a rom to my wing from over 3 days couldn't do it , I need to know where to put the files and how to set the files up , This maybe easy for you but not for average person like me , Please help.
reply
sorry i dont have a answer for you.but, i feel your pain i am going through this same stuff and i is pissing me off. i had my friend do everything but he is getting pissed off now because i keep calling him on ****. i need help too.
Well, we need to know what you are doing first!
What ROM are you flashing?
Do you have HardSPL already on? Or do you have no idea? haha
Thanks for your respond , I will like to install ROM HERALD WWE 6.1 BUILD 20764.1.4.3 (Blue clear) , I have no idea what is HardSL !! but i will learn if you give me a little direction .
tazzam72 said:
Thanks for your respond , I will like to install ROM HERALD WWE 6.1 BUILD 20764.1.4.3 (Blue clear) , I have no idea what is HardSL !! but i will learn if you give me a little direction .
Click to expand...
Click to collapse
How to Flash HardSPL
1) Find out your IPL
-- Do a Soft Reset (Push Button under volume w/Stylus)
-- While doing Reset, hold the Camera button, it should bring up the Bootloader menu and list your IPL (I think, it has been a while since I haven't been running HardSPL)
2) Verify your IPL is 4.xxx or Higher!
3) Boot your phone Again
4) BEFORE Hard-SPL--go to Settings->Connections->USB to PC and check that checkbox
5) Download HardSPL:
http://rapidshare.de/files/38148213/HardSpl_WM6.rar.html
6) Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
7) Soft Reset again
8) Run ROMUpdateUtility.exe
9) screen will become white - WAIT until it reboots itself (Should be like 10-15 min)
10) Phone will boot back to your main ROM
11) Soft Reset, Hold Camera button, check if SPL is 4.70.yang
Okay, now HardSPL is on
12) Download Your ROM
There are 2 ways of doing this now, either
1) Run ROMUpdateUtility.exe - When finished, go to Step 8.
-OR-
2) Put RUU_signed.nbh on your SD-Card and call it HERAIMG.nbh
3) Soft Reset, hold the Camera button
4) It will say: PRESS KEY TO INSTALL or something like that...
5) Press the volume button down or up
6) The ROM should begin to Extract/Install
7) When it finishes, do a Soft Reset
8) You should have your new ROM now!
Good Luck!
Original HardSPL Thread:
http://forum.xda-developers.com/showthread.php?t=358225
Thanks will try now
I followed the instructions, however when I turn on the phone holding down the camera button I get a white screen that states searching for SD Card (the white screen disappears quickly) then a new screen with RED, Green, Blue, White stripes with the IPL & SPL INFO, there is no option to press up to install the ROM. The ROM is in the Root of the Storage card named written as such in your walk through.
Tom in AZ said:
I followed the instructions, however when I turn on the phone holding down the camera button I get a white screen that states searching for SD Card (the white screen disappears quickly) then a new screen with RED, Green, Blue, White stripes with the IPL & SPL INFO, there is no option to press up to install the ROM. The ROM is in the Root of the Storage card named written as such in your walk through.
Click to expand...
Click to collapse
What size Card are you using?
I cannot get my 4GB or 8GB Card to flash... I have to use a 2GB card (I think it is SDHC Drivers not loading in BootLoader)
That is most likely your problem.
Try to get a hold of a smaller one (Maybe borrow one)
Fenopy said:
What size Card are you using?
I cannot get my 4GB or 8GB Card to flash... I have to use a 2GB card (I think it is SDHC Drivers not loading in BootLoader)
That is most likely your problem.
Try to get a hold of a smaller one (Maybe borrow one)
Click to expand...
Click to collapse
I had a 4gb in there, so that might be part of the problem, as time went on there was more going on it seemed. I finally got it to go back to that flash that came with the HardSPL software.
In order to do it, I started off by taking your advice. First I put in an older Lexar 2gb chip into the phone (Non-SDHC), then re-installed the three cabs that come with the hardSPL (installing them to the device, not the SD card). Then had to put the phone into the mode with the 4 different color bars (press and release the soft reset button while holding down the camera button till the bars showed), and finally I started the RUU from the PC since it still did not see or take the NBH file off of the root directory of the 2gb Micro SD.
I hope it does not get flippy like that again. The darn phone was deleting its own files as it was unhappy on the last build. Thanks for the tip on the SD swap. I'll be sure to keep that in my bag of tricks should it happen again.
Tom
where do i transfer the files to on the phone how do i install them
hankf said:
where do i transfer the files to on the phone how do i install them
Click to expand...
Click to collapse
HERAIMG.nbh go on the Root of the SD-Card.
All instructions are right in this thread:
http://forum.xda-developers.com/showpost.php?p=3321535&postcount=5
these files go to the root of the sd card: Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
Thanks for the help super n00b have been reading but still lost dont want to mess my phone up once I hard sl my phone can I still run my old rom or do I need to install a new rom right away
mmmm...
Damn Phone...
hankf said:
these files go to the root of the sd card: Transfer these files to the phone:
--- a) install canonyang.cab
--- b) install aserpolicy.cab
--- c) install disablesecurity.cab
Thanks for the help super n00b have been reading but still lost dont want to mess my phone up once I hard sl my phone can I still run my old rom or do I need to install a new rom right away
Click to expand...
Click to collapse
Those CABs can go anywhere. You need to put them somewhere (root of the SD works for simplicity)
So put the CABs on the root of the SD Card
Use File Explorer or Total Commander (Whichever you have on the phone) to navigate to your SD Card and run the 3 CAB files (Order does not matter) - Install them to the phone (Not the SD Card)
Then run the Installer from your PC as stated in the instructions.
*Note: Installing HardSPL will also install a New ROM (It is some old version of PDAViet I think)
As for installing your old ROM again, you would use a different method.
Similar to installing HardSPL, there is a PC-Based installer for the stock ROM, this ROM will revert you to T-Mobile default OS and back to SoftSPL.
I can upload this ROM later when I get home if you would like...
I think i got the CAB part understood.
When I do the HARDSPL I should have a ROM ready to install correct may I ask what you reccommend I have never used any of them so all new to me.
Could you please upload the stock rom to revert back to t-mobile, the installer and softSPL or what ever I need.
hankf said:
I think i got the CAB part understood.
When I do the HARDSPL I should have a ROM ready to install correct may I ask what you reccommend I have never used any of them so all new to me.
Could you please upload the stock rom to revert back to t-mobile, the installer and softSPL or what ever I need.
Click to expand...
Click to collapse
I would have the ROM you want ready, otherwise you would be stuck with the HardSPL ROM (Which you probably don't want to use)
I would suggest Just2Clean.
It is customizable & fast. (Can be found in the ROM Dev forum)
Stock ROM:
http://www.mediafire.com/?2nq9iu0a2nt
so with the stock rom I can go back to my t-mobile theme at any time or do I need to get rid of the HARDSLP first?
1 more question my phone is Windows Mobile 6 Pro so do I need to stick with wm6 rom or can I do like wm6.1
hankf said:
so with the stock rom I can go back to my t-mobile theme at any time or do I need to get rid of the HARDSLP first?
1 more question my phone is Windows Mobile 6 Pro so do I need to stick with wm6 rom or can I do like wm6.1
Click to expand...
Click to collapse
The Stock ROM installer puts SoftSPL back on the phone.
Windows Mobile 6.1 is just modified version of Windows Mobile 6.
It doesn't matter.
got the phone HARDSLP tried installing rom just2clean of the sd card having the same problems as in post #7 tried different size microchip 2gig with no luck so i installed touchFLO 2d and now my phone just keeps rebooting tried connect back to the pc but it sees no phone any ideas
hankf said:
got the phone HARDSLP tried installing rom just2clean of the sd card having the same problems as in post #7 tried different size microchip 2gig with no luck so i installed touchFLO 2d and now my phone just keeps rebooting tried connect back to the pc but it sees no phone any ideas
Click to expand...
Click to collapse
Try using Flash Center (http://rapidshare.com/files/202330180/Flash_Center.rar.html)
1) Put the phone in BootLoader (Make sure it says SPL 4.70.yang)
-- To get in BootLoader: Do a Soft Reset while holding down the Camera Button
2) Put the ROM in the 'RUU' folder (Name it anything [No spaces/special characters]) and try flashing using ROMUpdateUtility
If SPL is not 4.70.yang:
Try Re-Flashing HardSPL
If it won't stay connected long enough to flash (Gives an error upon flashing)
- When the Phone reboots itself, try holding the Camera button again, it sometimes will keep going
If you STILL can't get it going..
- Search desperately for a different SD Card (Make sure it is formatted in FAT32/FAT16)
I have bricked my Hera100 when i flashed OS only
its has the following :
IPL 5.04.0001
SPL 5.04.0000
GSM 03.07.90
OS 1.8.0.0
IT HANGS AT STARTUP SHOWING ABOVE DETAILS ONLY . PLEASE ANY ONE HELP PLEASE. THANKS
Okay. First, think you're going to want to do is flash back to the original WING/HERALD ROM - Click this link:TMo_Wing_RUU_Update_4.26.531.4
Also make sure to take out your sd card in your expansion bay if you have one.
Second, put your device into the bootloader by soft resetting your device (pressing in your stylus in the little hole on the left side of your device - then hold the camera button - until you get to a red-blue-green-white screen) then run the TMo_Wing_RUU_Update_4.26.531.4.
Then install the 3 CABs in this order:
1. Canon Yang.cab
2. ASerg Policies.cab
3. Disable Security.cab
6. Soft reset the phone.
7. Download the HardSPL folder, extract it, and place it on the Desktop.
8. Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen on the device will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
9. Phone should boot back into Canon Yang ROM. This is the HardSPL ROM. So far so good.
10. Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
If this works you can show you're patronage by trying one of my ROMs.
Tribulattifather said:
Okay. First, think you're going to want to do is flash back to the original WING/HERALD ROM - Click this link:TMo_Wing_RUU_Update_4.26.531.4
Also make sure to take out your sd card in your expansion bay if you have one.
Second, put your device into the bootloader by soft resetting your device (pressing in your stylus in the little hole on the left side of your device - then hold the camera button - until you get to a red-blue-green-white screen) then run the TMo_Wing_RUU_Update_4.26.531.4.
Then install the 3 CABs in this order:
1. Canon Yang.cab
2. ASerg Policies.cab
3. Disable Security.cab
6. Soft reset the phone.
7. Download the HardSPL folder, extract it, and place it on the Desktop.
8. Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen on the device will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
9. Phone should boot back into Canon Yang ROM. This is the HardSPL ROM. So far so good.
10. Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
If this works you can show you're patronage by trying one of my ROMs on my TribU2U thread
Click to expand...
Click to collapse
Thanks let me try i will post results .
Tribulattifather said:
Okay. First, think you're going to want to do is flash back to the original WING/HERALD ROM - Click this link:TMo_Wing_RUU_Update_4.26.531.4
Also make sure to take out your sd card in your expansion bay if you have one.
Second, put your device into the bootloader by soft resetting your device (pressing in your stylus in the little hole on the left side of your device - then hold the camera button - until you get to a red-blue-green-white screen) then run the TMo_Wing_RUU_Update_4.26.531.4.
Then install the 3 CABs in this order:
1. Canon Yang.cab
2. ASerg Policies.cab
3. Disable Security.cab
6. Soft reset the phone.
7. Download the HardSPL folder, extract it, and place it on the Desktop.
8. Run ROMUpdateUtility.exe located in the HardSPL folder. Update the ROM using the steps on the screen. The screen on the device will become white, but wait until the phone reboots itself. It could be 10-15 minutes.
9. Phone should boot back into Canon Yang ROM. This is the HardSPL ROM. So far so good.
10. Check your SPL by going to bootloader again. If it says 4.70.yang, you are good as gold and HardSPLed.
If this works you can show you're patronage by trying one of my ROMs on my TribU2U thread
Click to expand...
Click to collapse
It shows me invalid vendor ID but am trying to change your ROM to suite this device but i dont know how to ue mtty to get its CID infor. how can i get its CID infor????
Go the the wingster dot com. click roms, click tmobile wing, click 6.0 click download, it will take you to the tmobile website.
Enter the number located back of phone under battery. Download the StockRom. make sure you emter your phone into boot loader and install the stock rom. You don't need to be Hard SPLed. Should work because it worked for me. After your phone works just HardSPL your phone so you don't Brick it again.
Follow those instructions but do NOT download the Tmobile Wing's ROM since you don't have a Wing. Download the HTC ROM that was made for your device. (His SPL is only found on some Heralds, not on the Wing or other Atlas devices.)
I need to install the original ROM for Diamond I from boot loader beacuse the device can't make Sync. with my computer
alright well you need to get the .nbh file of the rom into your storage memory (in da main root not in any folder) and then rename it DIAMIMG once you have that turn off your phone and press and hold the volume key down and press and hold the back button ( the button on the pad to go back) and press and hold the power button until it turns on into bootloader mode . now if it worked it should ask to press power buttton to update or ok to cancel just press the powerr button and itll update when its done itll say update ok and u can restart the phone
thankes for your thread but i have aproplem because my phone cant make a sync. with my computer and i have anther thread with my proplem please read it and reply me
It doesn't need to sync.
Put the phone in bootloader as lokoz described and run one of the ROM installers. You don't even need to have the ROM in Internal Storage that way.
Will the newest original rom be better.
Hello dudes, I have a question, My htc touch diamond are not so touch friendly as i thought when i bought it. I know that it aint a Iphone but do you guys think it might get to be better with the newest ROM from HTC homepage.
Like when i want to call a number and press number 1, its says 2 instead.Thats kinda irritating.
But anyway, I have downloaded the newest rom for my touch diamond, ver 2.03. the one thats on my phone is 1.93. but when i try to install.. i get an 264 error, and it finnish without installing the ROM. Can I still install it ,Like if I put it into storage in the phone first and the install it from there.
Thankfull for any help
Try my rom in my signature. Its about as finger friendly as it gets. FIRST look up on how to prepare your Diamond before flashing, there are some important steps. If you need a link, PM me.
Sent from my XDANDROID using the XDA mobile application powered by Tapatalk