Hi There,
Im trying to find out why my battery is getting sucked dry so quickly so I've installed acb Power Monitor.
On first install it seemed to work fine (although my drain of 250+MaH seemed excessive) but now when I load the program up the figures are all wierd.
my X range goes from 0mA to 4.5E+09mA ?
also my NOW says 42949672 AVG 46684295 TOTAL 110953....ect ect a load of unreadable rubbish.
Is this an uncompatible issue with WM6 or Kaiser?
Cheers for any help.
Sideburnt said:
Hi There,
Im trying to find out why my battery is getting sucked dry so quickly so I've installed acb Power Monitor.
On first install it seemed to work fine (although my drain of 250+MaH seemed excessive) but now when I load the program up the figures are all wierd.
my X range goes from 0mA to 4.5E+09mA ?
also my NOW says 42949672 AVG 46684295 TOTAL 110953....ect ect a load of unreadable rubbish.
Is this an uncompatible issue with WM6 or Kaiser?
Cheers for any help.
Click to expand...
Click to collapse
Try giving a try to acbTaskMan; in the free (lite) mode, it's about as informative as acbPowerMeter but is, otherwise, much better and newer.
Let me know what happens.
I have just tried acbTaskMan but I am getting a reading of N/A under my Power (mA) field. I read on their site that this function is hardware compatability dependant. Strange since I got acbPower Monitor working once on first install (but not since)
I have just emailed the company for advice, but has anyone else had this program runing on a kaiser? im sure I read so, as there have been quite a lot of reports of people assessign battery drain with BT/Wifi enabled ect.
any other advice welcome, ta
Had them both, unfortunately same issue as you describe........no problem on my old P3600 though.....
@Menneisyys
I've been playing the flash-n-flash game with Dutty's and soon Q's ROMs.
With all of the discussion about battery life, screen stalls, etc, it got me remembering an old utility that I had once played with that would track such things.
It happens that it was acbPowerMeter
I went to their website, did some searching, found your great write-up on acbTaskMan from last March as well as this thread.
I have not yet downloaded/installed it but was curious about why it doesn't seem to be used by some of the ROM Chefs in their quests for the perfect ROM?
Hopefully this 'bump' will get a few folks who admittedly are MUCH smarter than I looking into it and finding a fix for the problems indicated above.
michi123 said:
Had them both, unfortunately same issue as you describe........no problem on my old P3600 though.....
Click to expand...
Click to collapse
Yup, it seems it's not possible to get the current on both the TI OMAP and Qualcomm platforms; only with Xscale and Samsung. Definitely bad news.
Sideburnt said:
I have just tried acbTaskMan but I am getting a reading of N/A under my Power (mA) field. I read on their site that this function is hardware compatability dependant. Strange since I got acbPower Monitor working once on first install (but not since)
Click to expand...
Click to collapse
Are you sure it DID show you an always-changing value? On TI OMAP, for example, it is constantly showing the same value, showing it's unable to meter the current.
Unforrtunately, in these cases, all you can do is
1. wiring a current meter between the battery and the battery slot (pretty hard to do)
2. running very long (can take days) tests to find out the battery usage of a given feature.
I've done the latter a lot with, for example, assessing the power usage of the BT unit on my TI OMAP-based Wizard. As I have several phones, I could just put it in a drawer for some days to have as dependable a result as possible.
What's weird about both acbTaskMan and acbPowerMeter is that if you have the Kaiser plugged in and charging then the software can correctly read and chart the current usage. When you then unplug the charger the software reports garbage.
Solution!
It won't work at all for me on my Kaiser, however HomeScreen++ works great for me.
http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#DownloadBeta
Unfortunately it doesn't have the graph like acb has. This means you have to switch back and forth to see the numbers when generating load in another application or game.
It does have some other cool statistics though.
Regards,
Sarel
Related
Is a lower lifetime characteristic of a WM6 ROM? Before flashing I used to be able to get ~two days life on WM2003, now I struggle to get 12 hours.
I do have the Soft GPRS tweak installed.
I've seen other posts relating to power off at around 30%, but this isn't a problem for me - I'm still getting life at 12%. It's just that I get to this low level so quickly, and have to charge each evening to have power in the morning. My battery is original, and otherwise the ROM (helmi_c's) is stable.
Any hints or comments?
matkinson said:
Is a lower lifetime characteristic of a WM6 ROM? Before flashing I used to be able to get ~two days life on WM2003, now I struggle to get 12 hours.
I do have the Soft GPRS tweak installed.
I've seen other posts relating to power off at around 30%, but this isn't a problem for me - I'm still getting life at 12%. It's just that I get to this low level so quickly, and have to charge each evening to have power in the morning. My battery is original, and otherwise the ROM (helmi_c's) is stable.
Any hints or comments?
Click to expand...
Click to collapse
mine is significantly shorter than when i was in WM5. but not as bad as yours. try this. go back to WM5 and see if it still gives u 2days.. then go back to wm6. then if u still get 12hours max with the same usage as you have with wm5.. then it's the ROM.
if you get poor batt life even going back to wm5, then maybe it's the battery. consider borrowing a battery, or buying a new one..
Are you sure your battery can stand only 12 hours ? it's too short. Try to reduce thre brightnes to save the power of your battery.
Ta for the suggestions.
I already have my screen brightness adjusted, and auto power off as appropriate.
Battery is the original, but behaved with 2003. I have two Himalyas (bought the second off a colleague for £40 as nervous about playing with ROMs!) and so two original batteries; both behave the same. I also inherited an aftermarket battery which is truly awful - goes haywire after down to ~45%.
I did try WM5 for a while, and don't recall the battery problem. As I have two devices, switching one to WM5 and comparing is a good suggestion. Unfortunately I need one application (NotifyLink - see thread in the WM5 forum) that I've not been able to get working in WM5, and *does* work on WM6, so if I need to go back it's WM2003SE for me :-(
Before trying to flash back to an older rom, consider some other battery saving options.
Lowering your screen brightness was a good idea, which you have already done.
Some other things to consider:
Turn off "Receive All Incoming Beams" until you actual need to receive something via bluetooth/IR.
Turn off bluetooth if you are not using it (this used to be a massive drain on my himalaya)
After closing a program, go to the task manager and make sure it is actually closed. THe cross in the top right hand corner usually just shrinks things. You can buy/download applications I believe that will actually properly close a program. I've on occasion had 8 progrms running at the same time simutaneously before closing them.
Make sure the terminals on your battery and himalaya are clean (where the battery connects) and also test to make sure your battery is seated correctly.
Change the timeout for your device (IE how long it will wait before turning its backlight off, and then turning off in full). Mine is set to 1 minute. You can set it as low as 30 seconds but I didn't like this as I felt it would wear out the backlight.
If I think of more I'll come back and write them. Perhaps someone has already made a "Save battery power" post. If not, perhaps someone will make one and the mods can sticky it.
cheers
The battery is geting life expired. Better buy a new battery..
Thanks for all the replies and suggestions.
If I've besmirched either of the ROMs published on this forum then please except my apologies - I discovered that my battery problems are NOT due to the ROM. But nor are they due to my battery!
Re-Flashing (or hard reset with reboot options) gives me good/normal battery usage. I therefore figured that my problems _must_ be due to an installed application. It didn't take me long to determine that this was due to NotifyLink, which I unfortunately need to install in order to receive my corporate email. With this present I lose approx. 6% battery power every hour(!), even with GPRS disconnected and the application not checking with its server. Just installing (even before configuring) the application I get this immense battery drain. Weird. Removing my SIM card doesn't help. Neither does uninstalling; I need to hard reset before battery consumption returns to being acceptable.
As I need this application it looks like I need to accept the need to top-up every evening.
(Medium term I know my company are moving away from this app, but will require DirectPush - anyone know if we can activate this in a Himalaya ROM?)
i recently replaced my battery for a new one. it was near 3 yrs old and it's battery life was steadily decreasing lately, shutting off just about 6 hours after a full charge! when i bought a new one it shuts of at 5% on the same rom and operating conditions, nice huh!?. so as a rule of hand slash of around 15-25% of battery life for every year of use. better yet save up for a new one while your on it .
matkinson said:
It didn't take me long to determine that this was due to NotifyLink,
Click to expand...
Click to collapse
Good job. As you can see on notifylink's newsletter they're very specific on devices fit for the job, for example not just any Wing, but TMobile Wing...
http://www.notifycorp.com/intheloop/index.htm
(Medium term I know my company are moving away from this app, but will require DirectPush - anyone know if we can activate this in a Himalaya ROM?)
Click to expand...
Click to collapse
As far as I know all you need for direct push is correct settings of exchange server and a device with WM5 or WM6 with built in MSFP or WM2003 with Global Contact Access installed. MSFP should probably be in your WM6 ROM unless your cook cut it out. In that case you can either try to find it in the ROM kitches of recent HTC devices and see what happens if you cook it into Hima ROM yourself. I don't know which file(s) you should use. Or you can download GCA and see if it works on your WM6 Hima.
Maggy - Many thanks for the response. Yes NotifyLink do recommend specific devices, but I've no idea if their battery consumption is any better. I do see from various postings here in my company that I'm not alone with problems - generally advice is to just check with the server less frequently, etc, which doesn't solve my issue. I'm going to have to live with this inefficiency for the moment.
As regards DP, I'll await with interest my company's progress in moving to this technology. Thanks for your information!
I have similar problem since WM6 Tofclock ROM is installed - getting just about 24hours battery life....Although the battery is quite old the Rom has definetly some incidence on this --- I have installed batti 2.1 following some threads i found here, hope it will help
Actually, I found out the same strange thing, while I was trying to solve another problem. I changed almost all of the OS/Radio Roms combinations, and with WM2003 the battery time when the phone is in stand-by is significally greater than with the WM2005 or 2006 Rom (days vs hours)... and this happens with every radio rom.
I have a Qtek 2020i and recently it got a serious battery problem. On a sudden the main battery started loosing its charge too early. It can become from 100% to 30% for a night (whan no operations are performed on the device). Before this breakdown the battery was loosing approximately 5% per night. At daytime when I use the machine, this process is quicker.
I use the battery for more than a year but the reason of the problem is not a battery. By the end of the day the meter shows 0% of the main battery (when in cradle, of course). Meanwhile the backup battery remains 100% and hard reset is not performed. If the main battery would really be 0%, I would loose all my data, but it never happens.
After I put my device in the cradle, it is "recharged" to 100% for less than an hour.
I made a hard reset of my device and after it the meter worked well. But after restoring the data from backup the problem reappeared.
I have some other problems that may be related to the battery problem. The Camera.exe looses its label in Programs and stops starting by pressing hardware button.
The device is loading slower after soft reset.
I change time for one Alarm. It works not only in the new time but also in all the previously set times.
There is a thread where similar problems were discussed, but there is no solution for the battery problem. Here is its link: http://forum.xda-developers.com/showthread.php?t=282763&highlight=battery
The problem may be in the register or in the battery driver or wherever. Please, someone help me and describe the solution for the other users of Apline.
Sounds to me like your battery is knackerd it does happen look on e-bay loads of places (usually in Hong Kong) selling new ones maybe even get a uprated one the standard one in the XDA IIi is a 1300Ah they do sell 2400 and even 3600 Ah ones I am in the process of buying a 3600Ah one myself, they are not a vast fortune (around £15 GBP) and worth that.
I have an upgraded battery myself. The computer behaves with it like with the 1300. Only the bigger battery discharges slower. But still quicker than few weeks before. This is a software problem and it disappears after the hard reset. But i don't want to make a hard reset and reinstall all my programs from zero. Besides, the problem can reappear. So, this is not a solution.
Software cannot run a battery down alone unless you have something permanatly turned on, that would be your choice.
if there is a hardware fault that could
Moses_Ivanov said:
I have an upgraded battery myself. The computer behaves with it like with the 1300. Only the bigger battery discharges slower. But still quicker than few weeks before. This is a software problem and it disappears after the hard reset. But i don't want to make a hard reset and reinstall all my programs from zero. Besides, the problem can reappear. So, this is not a solution.
Click to expand...
Click to collapse
i had a large capacity 3600mah battery and it was stuffed it would just lose all its juice instantly.
apart from getting a new bat, have you updated your firmware? or just reinstalling your firmware, there may a be prob with it.
but it does sound more likly that its time to buy a orbit
The most likely option is that wireless is on and not being indicated by the led or on the display, go into connections and see if it shows or better still see if your laptops wireless connection can see the phone, sometimes the indicator does not show but it is active.
skeeve666 said:
i had a large capacity 3600mah battery and it was stuffed it would just lose all its juice instantly.
apart from getting a new bat, have you updated your firmware? or just reinstalling your firmware, there may a be prob with it.
but it does sound more likly that its time to buy a orbit
Click to expand...
Click to collapse
I never made an update of my firmware. Dou you mean a hard reset by reinstalling the firmware or some updating (new ROM version etc)? The batteries come without any firmware. My ROM version is 1.11.00 WWE. I guess, there must be an update, but after updating the ROM I will lose all the date on the device, and I don't want this happen.
robsno said:
The most likely option is that wireless is on and not being indicated by the led or on the display, go into connections and see if it shows or better still see if your laptops wireless connection can see the phone, sometimes the indicator does not show but it is active.
Click to expand...
Click to collapse
I made a test and my wireless is not on.
i ment the rom, sry i deal with pc`s all day and it tends to stick.
yup update the rom, this may be your porblem, but make sure you do not update it on a vista pc, as it wont and you will end up stuck in boot loader mode. only update on a XP machine.
failing that its a buggered battery
Now I will not do anything that can make me reinstall my programs (as i have many). I am looking for some registry key, a checkbox, a process to be killed to solve the battery problem and leave the whole system inchanged.
I already have a solution, but I am not satisfied with it. Thgat is to make a hard reset no backup. Naturally, I will have to reinstall all my programs after that.
This solution has two bad points:
1. Reinstallation of all programs. That is a several days of work.
2. I will not know the reason of the failure. If the problem keeps returning in future, I will have to repeat the whole process again and again.
After the hard reset the meter works good, so I am syre that the battery is not buggered.
I am begining to wonder if you have a virus in it causing the problem? do you have any AV software?
what software do u have on it that will take several days to reinstall? there may be some compatablitly problems with the programs fighting for resorces.
and if you do a hard reset u may as well update the firmware.
i have just installed a new touch screen on my dads 2020i (his second in 3 months) and had to reinstall over 16 programs and that only took 30mins including removing and resoldering the new touch pannel. his backup battery is dead ;[.
McAfee VirusScan McAfee VirusScan
I tested my device with Airscanner Mobile AntiVirus Pro and McAfee VirusScan. They did not find anything, as I had expected.
I also made a hard reset to my device and switched my batteries several times. The device was recognizing them and showing correct information about their state. Both batteries worked long and short periods of time. So, the batteries are perfectly alive as well as computer hardware.
I use my PPC extensively, as we are not allowed to have pirate software on office computers. So I often prefer the Pocket PC to the Desktop one. I have more than 50 programs installed on my Pocket PC: maintenance tools, GPS programs with maps and waypoints, a reader, a player with plugins, a dictionary with the complicated installation procedure, some games. The list is not full. The setups for all of them are situated in different places. I would also have to copy my contacts and appointments. These are not hard jobs, but there is too many of them.
Besides, I am not as proficient as you, skeeve666.
If I don’t find a solution for my problem, I will reinstall my software in the weekend. That will help me to make rearrangements in it. By the way, do you know, where the newest firmware is? Anyway by looking for the answer to the battery question I learn more about my device.
Who knows, maybe I am lucky.
Moses_Ivanov said:
I tested my device with Airscanner Mobile AntiVirus Pro and McAfee VirusScan. They did not find anything, as I had expected.
I also made a hard reset to my device and switched my batteries several times. The device was recognizing them and showing correct information about their state. Both batteries worked long and short periods of time. So, the batteries are perfectly alive as well as computer hardware.
I use my PPC extensively, as we are not allowed to have pirate software on office computers. So I often prefer the Pocket PC to the Desktop one. I have more than 50 programs installed on my Pocket PC: maintenance tools, GPS programs with maps and waypoints, a reader, a player with plugins, a dictionary with the complicated installation procedure, some games. The list is not full. The setups for all of them are situated in different places. I would also have to copy my contacts and appointments. These are not hard jobs, but there is too many of them.
Besides, I am not as proficient as you, skeeve666.
If I don’t find a solution for my problem, I will reinstall my software in the weekend. That will help me to make rearrangements in it. By the way, do you know, where the newest firmware is? Anyway by looking for the answer to the battery question I learn more about my device.
Who knows, maybe I am lucky.
Click to expand...
Click to collapse
like is said if you hard rest u may as well flash your firmware, and you said u hard reset.
why is this a problem? and no offensese and no need for you to take one, as you already have. but i realy dont see why you wont try this as you have already "factory reset" aka hard reset your phone. but after a reflash backups wont work.
as for the latest firmware just look in the update section. you must not update in vista only on a xp pc.
but after all this, it may just be a hard ware prob that only effects your battery monitoring
The reason why my battery was discharging so quickly is not known to anyone, including the staff of a service center. So, I made a backup of a faulty system (as a memory) and did a hard reset.
After a day of installing over 50 programs my computer is better than ever. I did not dare to install some other firmware but I placed as much data as possible to the Storage Card and now I have a maximum of 50 Mb free Program memory and 46 Mb of Storage memory. I upgraded some programs and improved the work of the other.
I am thankful to everyone who showed interest to my battery problem. I wish everyone good luck in using Qteks.
do you have a link to a 3600 mAh battery?
skeeve666 said:
i had a large capacity 3600mah battery and it was stuffed it would just lose all its juice instantly.
apart from getting a new bat, have you updated your firmware? or just reinstalling your firmware, there may a be prob with it.
but it does sound more likly that its time to buy a orbit
Click to expand...
Click to collapse
Is that batterry much more thicker than original one? Could you upload a small photo to see how your device is look like with that battery installed?
Isteban said:
Is that batterry much more thicker than original one? Could you upload a small photo to see how your device is look like with that battery installed?
Click to expand...
Click to collapse
unfortunaly this was a while ago, and that battery was set for recylcing, but it is alot more bulky it sticks out about 4-5mm i have gone with 3 original batteries just have to swap them out
I bought a 3600mAh battery from Hong Kong was about £9.99 if I remember right but it came with a new back to cover the thicker battery and that battery lasts me up to 48 hours provided I dont leave the screen turned on best thing I have done for it IMHO
did some digging and I put this in another post
think this is the link
http://myworld.ebay.co.uk/battery_centre/
it cost £9.99 plus I think it was £4.99 P & P
I was just wondering if someone can test it out as well. Ok my situation is that I used to put my phone in standby with nothing on such as my phone looking for email every so minutes because I set those to manual. Don't have any programs running as well. Well when I would wake up my phone the battery would be drained substantially. Example of this was I had my phone at 100 percent charge, went to bed and when I woke up my phone wouldn't wake up so I popped out the battery, put it back in and 28 percent battery. I was like wtf I'm not even using my phone. Well I noticed that if I turn on my bluetooth the battery does not drain like it does when it's off. Kind of weird but I've tested this out and it works. I am using Shaps: 4.31 ROM English and Radio: 1.27.15.32 (I remember reading that this radio was a BETA but I've been using it for almost 2 months maybe more) I'm thinking about switching my radio for another one. Just wanted to let you guys know it's weird. I find myself keeping my bluetooth on all the time so the battery doesn't drain as fast. I can actually get a full days use of my phone now. Weird huh?
Yup - weird - I find exactly the opposite. I turn off my bluetooth when I do not specifically need it to SAVE my bettery.
Bill
I have an even different situation. Since I constantly use my bluetooth headset, I leave Bluetooth in the "On" mode all day and night. The thing is, I charged my battery until it was at 100%, left it on the counter (not charging) for the night (approx. 8-9 hours) and when I woke up, it was at 98%!
Keep in mind, Bluetooth and WiFi were both turned on. Good stuff.
Commas are your friend.
As it is, it's barely readable.
gqstatus0685 said:
I was just wondering if someone can test it out as well. Ok my situation is that I used to put my phone in standby with nothing on such as my phone looking for email every so minutes because I set those to manual. Don't have any programs running as well. Well when I would wake up my phone the battery would be drained substantially. Example of this was I had my phone at 100 percent charge, went to bed and when I woke up my phone wouldn't wake up so I popped out the battery, put it back in and 28 percent battery. I was like wtf I'm not even using my phone. Well I noticed that if I turn on my bluetooth the battery does not drain like it does when it's off. Kind of weird but I've tested this out and it works. I am using Shaps: 4.31 ROM English and Radio: 1.27.15.32 (I remember reading that this radio was a BETA but I've been using it for almost 2 months maybe more) I'm thinking about switching my radio for another one. Just wanted to let you guys know it's weird. I find myself keeping my bluetooth on all the time so the battery doesn't drain as fast. I can actually get a full days use of my phone now. Weird huh?
Click to expand...
Click to collapse
If your battery is draining over night when your not using it, it's probably because you have something running in the background. You might have "closed" something and then it was actually still running. Try installing AlltheWay's task manager. This aids in making sure nothing is running in the background.
I'd upload the cab but I'm at work and don't have it.
Getting a full days use out of your phone is NOT something you should be happy about. I get 2 days with Wifi and Bluetooth use.
@ kamilzmielca: Your Wifi connection goes to sleep when your phone does, so your Wifi actually wasn't running over night.
gqstatus0685 said:
I was just wondering if someone can test it out as well. Ok my situation is that I used to put my phone in standby with nothing on such as my phone looking for email every so minutes because I set those to manual. Don't have any programs running as well. Well when I would wake up my phone the battery would be drained substantially. Example of this was I had my phone at 100 percent charge, went to bed and when I woke up my phone wouldn't wake up so I popped out the battery, put it back in and 28 percent battery. I was like wtf I'm not even using my phone. Well I noticed that if I turn on my bluetooth the battery does not drain like it does when it's off. Kind of weird but I've tested this out and it works. I am using Shaps: 4.31 ROM English and Radio: 1.27.15.32 (I remember reading that this radio was a BETA but I've been using it for almost 2 months maybe more) I'm thinking about switching my radio for another one. Just wanted to let you guys know it's weird. I find myself keeping my bluetooth on all the time so the battery doesn't drain as fast. I can actually get a full days use of my phone now. Weird huh?
Click to expand...
Click to collapse
This could also be related to this: http://forum.xda-developers.com/showthread.php?t=371734
yeap, mine does the same thing, thought i was crazy, but with bluetooth on i save battery life.
Yeah man I thought I was going crazy also. To the previous poster all the programs are fully shut down. I've had many pda's (windows) and I am familiar with how they work. I fully shut everything down and then put it to sleep. Bluetooth seems to be extending my battery. Like I said before all my email I have setup in the phone I set so I manually have to send/receive instead of it looking for it at a predestined time. Nothing is automatically connecting (as in programs) I'll look a little deeper, it may be due to the radio version on my Kaiser. Any input on this guys?
gqstatus0685 said:
Yeah man I thought I was going crazy also. To the previous poster all the programs are fully shut down. I've had many pda's (windows) and I am familiar with how they work. I fully shut everything down and then put it to sleep. Bluetooth seems to be extending my battery. Like I said before all my email I have setup in the phone I set so I manually have to send/receive instead of it looking for it at a predestined time. Nothing is automatically connecting (as in programs) I'll look a little deeper, it may be due to the radio version on my Kaiser. Any input on this guys?
Click to expand...
Click to collapse
you could try to measure the actual battery usage with "BatteryStatus" with and without bluetooth. Would be interesting to see the differences.
Maybe the bluetooth is slowly charging the phone when on through the radio waves! or some mad theory
I might give this a try as my phones lasts about a day atm
My phone lasts about a day at the most with full battery charge. 2 hour of talk time plus the other stuff I usually do. 2 days is crazy maybe you don't have as much programs on your phone so you use it less. (to the previous poster) I will get that battery program and do a test to see the difference.
another crazy idiot here: bluetooth on also gives me a longer battery life...
is this a joke from HCT??????
pietrucci said:
another crazy idiot here: bluetooth on also gives me a longer battery life...
is this a joke from HCT??????
Click to expand...
Click to collapse
Your not crazy man! I'm doing a test now with BatteryStatus and notice that I actually get a lower mA reading with BT on. This is messed up.
When I fist read this thread I though everyone was nuts, now I think I've just entered the rubber room. lol
I could imagine, that some application or some part of the operation system is trying to communicate with the bluetooth stack. And when bluetooth is turned of, it tries it again and again. Where when bluetooth is turned on it justs recognizes, that bluetooth is on but no device is paired and doesn't bother any more.
Just an Idea. But it would be interesting to find out if this also happens with an absolutely clean device after hardreset. And if so, if this applys to all ROMs.
I mentioned in another thread, but I installed that new Google Search bar that came out the other day. It sits on your Today Page. Battery life went to heck when it was active. As soon as I disabled it, battery life improved. I'll try turning on BT. You never know.
Just an update.
I've flashed duttys new release (in my sig) and the mA reading is where its supposed to be (between 1-5) WITHOUT having bluetooth running. I'll test with BT on for a little and post back.
EDIT: With BT on I seem to have the same power drain as I would normally.... which is great cuz I usuall leave it on anyway.
This BT phenomena might have something to do with the flashed ROM you guys are using. I've got the standard HTC TyTN2 default ROM and BT on definitely sucks battery power more than without.
Very strange. I could even see it being possible...
With bluetooth on in standby it's doing sub-10mA (5-8mA). With the screen on, it's about 80mA to 100mA.
With bluetooth off in standby it's doing sub-10 again... maybe a little lower.... and with the screen on... still around 80mA.
Doesn't seem to be having the desired effect on my phone (stock O2 ROM), but then I can already get 2 days out of my phone without too many problems.
Now it only saves my battery granted if I'm not using a bluetooth headset. If i'm using bluetooth like via a headset it will drain fast. If I have it on but not using any Bluetooth devices it saves my battery.
Bluetooth on... wtf??
Hi all
... unbelievable, i test this on my device too, and i can confirm -> Bluetooth On (but not using it) saves my battery!!!
Info:
WM6 Pro CE 5.2.1620 (Build 18125.0.4.2)
ROM: 1.56.408.5
Radio: 1.27.12.11
It could be added to the Wiki!!!
Hello, I am new to this forum but it seems like the right place to post this.
I did some searching on this forum and I saw that I was not the only one with this problem, however I did not find any answers to the posts regarding this. I am hoping some suggestions will show up in this thread though
My Diamond has been acting very strange for about a week now. All of a sudden, my batterytime decreased from a (for me) normal time of about two days, to about 30 minutes. Also the bottom part of the phone gets really hot.
What's even more strange is that two days ago it somehow just went back to being fine?! Today it's back to it's weird hot/battery devouring state.
ROM-version: 1.37.413.3 SVE (Yes, I know I should update it...)
Radioversion: 1.00.25.03
PowerGuard says:
Battery Current: -324 mA
Battery Voltage: 3542 mV
Battery Temp: 38,9 C
I also have a few applications installed, like the answerkeys disabler app and G-alarm. But other than that it's pretty much stock.
Has anyone heard about this before? I don't really like the idea of sending it in for repair since it's about 10 days without my precious phone =)
Any suggestions greatly appreciated!
i have read on here before that it sometimes is fixed (or reduced) by updating the Radio.
i believe the BS14 radio is the best one for reducing heat and improving battery life.
mugglesquop said:
i have read on here before that it sometimes is fixed (or reduced) by updating the Radio.
i believe the BS14 radio is the best one for reducing heat and improving battery life.
Click to expand...
Click to collapse
Okay, I have no idea how to do that, could someone point me in the right direction? A guide or something?
Have a look at the Wiki
http://forum.xda-developers.com/showthread.php?t=411479
Okay, thanks!
dande01 said:
Hello, I am new to this forum but it seems like the right place to post this.
I did some searching on this forum and I saw that I was not the only one with this problem, however I did not find any answers to the posts regarding this. I am hoping some suggestions will show up in this thread though
My Diamond has been acting very strange for about a week now. All of a sudden, my batterytime decreased from a (for me) normal time of about two days, to about 30 minutes. Also the bottom part of the phone gets really hot.
What's even more strange is that two days ago it somehow just went back to being fine?! Today it's back to it's weird hot/battery devouring state.
ROM-version: 1.37.413.3 SVE (Yes, I know I should update it...)
Radioversion: 1.00.25.03
PowerGuard says:
Battery Current: -324 mA
Battery Voltage: 3542 mV
Battery Temp: 38,9 C
I also have a few applications installed, like the answerkeys disabler app and G-alarm. But other than that it's pretty much stock.
Has anyone heard about this before? I don't really like the idea of sending it in for repair since it's about 10 days without my precious phone =)
Any suggestions greatly appreciated!
Click to expand...
Click to collapse
I have had a similar experience....a day or better battery life has been norm for a month, until the other day when I noticed my phone was very warm/hot and had burned an abmormally high perentage of the battery life in two hours. I also had one occurrence where instead of the normal 7-8% overnight burn, it had used 70% of the battery life. I'm still trying to see if I can catch the culprit; some sort of latch up of the hardware or a program not behaving.
Let us know if your problem does go away with a different radio. I have a stock US GSM and am happy with the radio performance...(unless it's eating my battery when I'm not looking.
Ah, so I'm not alone then!
I have not yet had the time to try this as I have been working too much, but I will try updating the radioversion before I buy a new battery or something, that's for sure...
I'll post in this thread with results when I'm done!
By the way, if I upgrade my ROM, will that also update the radioversion?
Hey everyone. I recently purchased a 8925, and am experiencing the battery drain issue that some others have mentioned. I used to own a 8125 and its battery life was much longer (easily 3 days of my usage). I installed batterystatus on the tilt and it seems at idle with all apps closed its pulling 60-60 mA, where my 8125 used 10-15mA. Has anyone come up with a solution for this? I currently have 3.29 hardspl with the stock wm6.1 installed.. any help is much appreciated
Quintman said:
Hey everyone. I recently purchased a 8925, and am experiencing the battery drain issue that some others have mentioned. I used to own a 8125 and its battery life was much longer (easily 3 days of my usage). I installed batterystatus on the tilt and it seems at idle with all apps closed its pulling 60-60 mA, where my 8125 used 10-15mA. Has anyone come up with a solution for this? I currently have 3.29 hardspl with the stock wm6.1 installed.. any help is much appreciated
Click to expand...
Click to collapse
turn the lcd brightness down, get kaiser tweak...set your mobile internet connection to go off after a period of a minute or two of non usage (thats a big one)
I have done these above listed, brightness down all the way, i disabled the internet connections with nodata, and i did a couple things with kaisertweak (sd power management). This seems to have no effect on the drain
Less is better when it comes to longer battery life....
Quintman said:
I have done these above listed, brightness down all the way, i disabled the internet connections with nodata, and i did a couple things with kaisertweak (sd power management). This seems to have no effect on the drain
Click to expand...
Click to collapse
Maybe all the extra bits of software and utilities that have been installed are gobbling up those CPU cycles (and consequently the battery charge). I have a very basic setup on my TyTN II and reducing the screen brightness right down as well as changing to GSM (rather than 3 G) makes a huge difference in battery life. Even disabling HSDPA and resorting to just 3G makes a difference. It's time to simplify things I think and rather than installing apps to stop a data connection starting up for example, delete any data connection settings on the phone and simply don't do anything that may require a data connection.
How long are you getting out of a charge, doing what sorts of things how often? I'm sure if you hard reset back to the basic ROM and test again with just these few changes, you'll notice a big difference
If I simply flash the stock ATT rom on the phone, and install batterystatus to view my drainage, it is still at 47mA. It seems turning off all the data stuff saves maybe 10mA... i understand that a bad battery would drain faster but would that make the 47mA on standby? i thought that measured how much the phone was using? maybe the battery is bad. just yesterday i left at 7:30am with a full charge. I litterally sent maybe 4 text messeges and maybe a 3 minute phone call, the rest of the day it was on standby, and at 7:30pm it was down to about 34%! this is unacceptable!
Does anyone know what batterystatus reads? either the rate that the battery is losing power or the rate the phone is using it. is it possible that the battery is bad and would cause it to drain at a higher amperage? i know a bad battery drains faster but dont know about this.
I feel your problem. My tilt is so bad that it still drains while charged in the car. Maybe a bad battery but this is crazy.
ok I talked on the phone today more than usual (maybe an hour max!) and it shows that the battery drains super fast when making a call, which to me says the battery is just toast because a call uses more power. I was hoping to find a solution but i think I will just purchase a new battery.
how about buying a slim extended battery on ebay, the 1600mah one. You will definitely notice a difference
Quintman said:
If I simply flash the stock ATT rom on the phone, and install batterystatus to view my drainage, it is still at 47mA.
Click to expand...
Click to collapse
Well from what I hear the ATT ROMs have lots more 'stuff' than the native HTC ROMs but whether that means more CPU cycles are used when those programs aren't started I doubt. It's really background utilities that'll be of concern. Rather than installing software (which itself will use battery charge) to see why your battery charge is going down so quickly, what's wrong with going about your normal usage without non-essential utilities and keeping an old fashioned log of how long a full charge lasts and what activities for how long you used your device for? If you try some of the suggestions already given and keep a careful log, you will notice a marked improvement - I did. Whether you wan't to keep those changes though is important. I found the screen was just to difficult to see at low brightness settings when out in the sunshine so I've set it back to a high level and carry 2 spare batteries with me when I'll likely be out and about using the device for a full day - I've yet to get through all three batteries in a day and they're compact enough to easily carry around. With my cradle that has a battery recharge bay, I can also recharge all my batteries overnight.
Sold phone, MODS PLEASE DELETE