Cannot Install applications - PDA2, XDA IIi, 2020i General

Hi all,
For some reason, about 6 months ago, my Alpine started refusing to install applications: when I run an application installer on my PC, it comes up with
"Error in Windows CE setup files: Application manager cannot install this application on your mobile device due to an error in the set-up file. reinstall and try again".
If I copy a cab file on the Alpine and run it from there, everything works fine.
At the time I was on the "Alpine_Ext-1.11.162_Radio-1.04_O2stuffstripped_Camera_Fixed" upgrade.
I had a backup of my original ROM on SD card which I have now re-installed, but I still get the same problem.
Is there any way of getting the Alpine back to its original state? It seems that something has been corrupted somewhere. Or is it the Activesync software?
Activesync 4.5.0 (build 5096) on windows XP
Operator version 3.11.1.167
ROM version 1.11.00.WWE
Date 01/27/05
Radio 1.03.00
Protocol 1337.42
Ext Rom 1.11.167
Thanks,
seg

are you sure your installing software that is compatable with the cpu?

skeeve666 said:
are you sure your installing software that is compatable with the cpu?
Click to expand...
Click to collapse
Yes, it's software that I have bought and installed before on this machine.
seg

Related

Pre-production problems

Hi!
I've got a pre-production version of the Qtek 9090.
The ROM version was 0.9x something and I had some troubles with it so I figured I would just update it... Shouldn't have done that
Anyway, I got hold of a strange update file, called "HA_RUU_12100_112_00125.exe" and ran it on my PC. Not that bright, one might think :?
The device would not fully boot up. I then took out the battery and waited a coupple of minutes. After that it booted up nicely. However, the device is not fully functional and when I look in the "Device Information" it says:
ROM version: 1.21.00 WWE
ROM date: 07/28/04
Radio version: DM FAIL
Protocol version: DM FAIL
PRL version: N/A
ExtROM version: 1.21.112 WWE
I've tried upgrading it using all the tools and instructions that I could find on this great forum but with no luck..
The DeviceData app brings back a strange txt-file that looks a bit like this:
PH20A1 A 1 WWE E [and some strange characters] 1.21.00 0 0 1.21.112 DM FAIL
I would be VERY grateful if someone could help me back to a fully functional device!!
Bump!
!!!Help!!!
so, why don't you just try using a non-strange file to upgrade your device then?
Help!
I am, you know! :lol:
I've tried upgrading it using all the tools and instructions that I could find on this great forum but with no luck..
Click to expand...
Click to collapse
maybe upgrading the radio stack using the SD method would solve your issue, however, you'll need an SD backup of a working Radio rom for this.
there is a 1.06.01_sd_img.rar (german i think)
and a NTRW_ImageQtec9090.rar (no idea which language)
on the ftp
THANK YOU!!!
I'll give a try right away!
What does the "NTRW"-file do?
Can I upgrade the radio stack without any 120-errors?
A quick question:
Do a use Winhex or some other tool to copy the data to the SD card?
To be more specific:
What tools do you use to copy the .nb1 file to the SD card?
Help!
xdatools is used to program sd cards with rom image.
I've tried the version of XDATools that I found on Jeff Summers page. It says "Invalid file size" and that the image should be a certain size. The Radiostack is not that size..
Anyone?!
Getting Image on XDA III / PDA2k from SD
Just use "ntrw.exe" - search forum for location. That runs in DOS and will copy the .nb1 image you can get from the ftp to an SD card in one command. Insert card/enter bootloader and it worked for me (but not the radio as it hung there - i also have a pre production model)
chris
I've got the 2.03 version of the Bootloader and it will not detect the card...
Do you know how I can upgrade it?
Strange - I had 2.03 too - but after I applied the 1.06....sd_img file from ftp it uploaded to 2.05 - so i was in the same position as you and got it working.
I am not 100% sure it was that file i tried first - it might have been
ntrw_imageQtec9090.rar also in the ftp archives.
Either way I do find some images dont work - so i also found and used psdwrite.exe and that seemed to work when writing images using ntrw.exe did not. I am sure there is something else wrong- but find that between these 2 I can create bootable Sd images that at least get the device up and running.
I am still struggling to upgrade the radio stack - as with the 0.9x version none of the "mainstream" upgrades work - they all fail complaining about the radio stack version.
Good luck - i think you must be close!
Thank you Hampers!
Progress! I got the Bootloader to accept the Qtec.nb1. It takes about 40seconds before it reacts and after that it says:
"
SD Download
=========
Selection=1
Not allow
update!
"
Quite strange, don't you think?!
Just make a copy of your 9090's ROM with romupdate.exe and ntrw and copy the firtst 416 bytes from that to the image file you are trying to flash by overwriting them. Then it will allow the update
Just make a copy of your 9090's ROM with romupdate.exe
Click to expand...
Click to collapse
I would like to but when I give the command "d2s", it runs a checksum test, starts to copy and finally fails with the message "Add record is error!" (Even I speak better English than that )
The SD card now contains a bit of information from my Qtek. When I try to re-flash it with this information it returns the same message as usual; "Sections=1 Not allow update!"

Broadcom Bluetooth 1.6.0600 cab available here!

The new version of Bluetooth 1.6.0600 is now available at
ftp://xda:[email protected]/BlueAngel/OEM_WWE_160_600.sa.CAB
I have installed it but I haven't tried it yet. I had no problem installing the cab manually or directly from the Extended ROM.
Does any one knows which are the corrected bugs in this version and what's new? Why this new version number (from 1.0.3500 up to 1.6.0600)? It looks like a major release to me. I hope it DOES solves the problems we have with Bluetooth and our Blue Angels.
Enjoy it!
ArtZ
thanks for this really a nice update
I can't install it! :x
It says that a dll is in rom and connot be overwrited ...
(how do you install using extended rom??)
Thanks
I guess Bluetooth has to be be turned "OFF" when you install the update.
I had no problem to install it. I will play with this update tonight at home
ArtZ
I tried with it off, even put it in the startup dir but it says the same error ...
Yeah!
Occur the same thing with me!
Can anyone say the reason for this?
It will be because of the ROM installed on int?
My device configuration is:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtRom: 1.22.126 WWE
Thanks.
If it can help, here's my device info:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtRom: 1.22.557 WWE
Thanks!
Hi,
i have the same problem.
the dll is in use or in rom
Thanks.
I have installed the cab in two ways as follows:
First way: I copied in my SD Card the OEM_WWE.160.600.ca.CAB and I launched from there with the Bluetooth turned "OFF" and all other communication ports closes ( No active USB for ActiveSync and/or Wi-Fi) and I had no problem to install it.
Second way: I have unlocked the Extended ROM and put the CAB there deleting the previous BT patches from the Belgium Extended ROM ver.557 (OEM_124_008.ca.CAB, OEM_Patche_12100401.sa.CAB, then, I deleted the two lines to install these patches in the Config.txt file to replace them the new CAB) and I had also no problems to install.
Hope that helps.
Regards,
ArtZ
Hmm..
Well. I got the same problem..
The file "\Windows\ace_ddi.dll" is in use or is in ROM.
What to do?
I had more of a problem even out of the cradle so I:
Renamed the files in the \windows
(My Resco Explorer complained that it was unable to delete but it renamed them any way
ace_ddi.dll
ahioem.dll
AudioGW.dll
BtCeIf.dll
BtCeProfiles.dll
BtCeStack.dll
BTChooserLib.dll
BtPhoneIf.dll
btrez.dll
BTTrayCE.exe
FrontLight.dll
Keybddr.dll
Serial_BTUR.dll
Serial_Cmd.dll
Wavedev.dll
wbtapiCE.dll
Then I installed the Cab from \Storage\temp
Bluetooth Reports 1.6.0 Build 0600
I have not tested if it works
Has anyone tried this on an XDA II with 2003SE?
I'm tempted to install it if it works.
It Worked!! Had to renew a few more file but it is running now.
Thanks MDAIIIUser!
I have a Verizon XV6600 and tried this. For whatever reason it instantly makes the phone stop working. Also the Bluetooth starts but also instantly turns off with the following message: "The Bluetooth Radio failed to turn ON due to insufficent driver memory available. You must perform a normal reset before you can trun ON the Bluetooth Radio."
Before I install (and risk another Hard Reset and new System Setup) the key questions:
1) Does ist improve BT-headset voice quality or stability?
2) Does it include or work with the High Quality Audio Profile for the HP BT-Headphones?
3) What are the recognizable improvements over the 1.0.0.3500 stack?
Any answers available?[/list]
Before checking the forum again i made the same procedure described by MDAIII user .
I have tested with my HB60 headset and its working fine so far..
RE
Its NOT working on O2 XDA II with WM2003SE.
The whole thing hangs
:evil:
How do I make the dlls visible in order to rename them?
I would like to install this on an XDA II but I cannot see the dll files in the Windows directory.
How do I make them visible in file explorer so that I can rename them?
RE
Just go to File Explorer --> Windows and tap the screen and hold it there. A box will pop up and you'll be able to see 'View All Files'
Broadcom Bluetooth 1.6.0600 cab available here
Hi all
I did this update 3 times, the install went ok, but me BT signal
is not very good, it swings up and down..
Did this only happen for me ??

Help LOST CRITICAL FILES>>>>

OK, I have a Verizon Wireless XV6600.... I accedentaly deleated some files in the windows folder, and now my "Album" will not open, and I cant play any videos.... I am not sure how to back up all my data, settings and programs. I would like to do so before upgrading firmware or re installing the Windows Mobile.
Where should I start, Without loosing everything?
HELP???
ROM version: 1.35.00 WWE
ROM Date: 12/10/04
Radio Version: HA01_140
Protocal version: AA3.3.301
ExtROM version: 1.35.113 WWE
ALSO, I use a MAC with Missing Sync. :?:
In your case I recommend upgrading to the latest ROM.
most of the programs can be later re-installed using Activesync.
If you keep all item in PC's Outlook, you'll be able to sychronize them with 'fresh' device.
It's hard/impossible to preserve ALL programs and settings.
Hard resseting / flashing the device always require some configuration work after...
Good luck.
OK, It seems to be the "Album" program is missing:
I did some cleaning and, when I try to run ALBUM, I am now getting the error:
Album.exe- (Cannot find 'Album' (or one of its components). Make sure the path and filename are correct and all the required libraries are available.)
How do I download this program and where?
I need the slideshow with Vids and PICs.... I love this little usfull program!
HELP
I am using the Verizon XV 6600 with camera....
upgrade
just upgrade your device to new ROM

Softick Card Export II PPC on an Qtek 9100 (MDA vario etc.et

for those who use an Qtek 9100 (MDA vario etc.etc) plz try this tool
this tool should be used by any PPC user youll get a smal icon in the launcher wich makes you able to swich between ActiveSync and just memorystick drivers
wich means you can just connect your ppc to any pc (even a mac) and it would been recognized as an usb stick(mass storage device)
plz help the makers debug the tool as they say it should work on the qtek 9100 altough if i try it gets stuck after installing the mass storage driver on my xp machine it just doesnt activate the device in the device manager
maybe we could all follow pewe and post our problems on
http://www.softick-forum.com/viewtopic.php?p=102#102
anyone who would get it to work plz post all info (rom version etc.etc.)
It's working in my device
I have it working without problems.
My device:
ROM: 1.3.7.5. ESN in Spanish
Radio: 01.12.10
Protocol: 4.0.13.23
ExtROM: 1.3.7.105
Cardexport II v2.11b
It's working on mine with no problems as well but I'm using v2.11b, when i use the latest v2.12(edit from 2.21 to 2.12) the USB mode doesn't work.
Imate K-Jam Rom 2.16.9.1WWE
you can use another program called WM5Storage found at
http://www.modaco.com/WM5torage-t238545.html
The latest CardExport (2.12 IMHO) don't work on Wizard. Previous 2.11 acts perfectly.
used it on qtek, tmo, and jam images
greetz
Hi, i had some problem with card export, sometimes it works, after not, a reboot, it works..., but with wm5storage, all is OK and it is free !
Qtek 9100 French rom 2.17
Check out the new v2.15, works perfect with the latest Qtek ROM.
Only thing you have to do after installing is soft-reset, go the the Preferences of the app and under the tab Hardware select "Alt init order" and "Use dumb endpoint" and offcourse switch it to Card Export
Can't Remove Windows WM5Storage
I tried installing this and it put itself inside the accessories folder. It didn't work with my MDA and I tried removing it using Add/Remove programs but it didn't work, the folder is still there. I tried to reinstall it and now I have 2 folders. LOL, how do I get this thing deleted out of my MDA!

Application problems

Have an xda11i and when i install tomtom navigator6 another program that i have already installed comes up as "not a valid pocket pc application"
is there anyway around this.
Try re installing the other app after tomtom it may be a shared supporting file conflict where one app needs a newer version that the other app does not recognise
robsno said:
Try re installing the other app after tomtom it may be a shared supporting file conflict where one app needs a newer version that the other app does not recognise
Click to expand...
Click to collapse
or your installing the WRONG version of tt6 make sure its the 2003 version not the wm5/6 version
its not another program its the phone saying its not compatable wich means your installing the wrong version
Sorted,Thanks for the Advice
Transfered tt6 onto the Sd card and both work with no clonflict

Categories

Resources