Hi,
I few weeks ago I did a update to touch it.
a few days ago my usb connection broke and I have to send it to repair.
Does it still have warranty with another rom, or do I need to change it back to wm6 or 5???
And if i need to do that. is it possible to change my rom without activesync but with my sd card???
I hope someone can help me.
grzz
try with SD card.
Related
Hallo i got a proplem with my Diamond i have flashed my Diamond longtime ago with many Roms but than any day is comming and my Diamond dont read any simcard.
Dont know if it done after i have flashed a wrong rom or other.I think the last Rom i have flashed was a Rom with Win 6,5 on it but dont know to 100%.
Then i have flashed it back with the normal o2 Rom and got same Proplem.Next day i send it too my support but forgot the hardspl on it and he have send it me back with her answer No Legal Software on it +25 Euro too pay wtf.If i want it to repair i need to pay like 300 + Euro .
I hope its only a software proplem but dont now how to fix it.I have flashed the New O2 Rom from O2 Page it´s dont read any simcard.
I have flashed the Hardspl again and get the same proplem dont read my simcard Handy is Working 100% ,Musik,Wlan,Inet over Wlan,Menu .....
I hope anybody can help me And sorry for my bad english
EDIT:
Flashed the new Germany O2 Rom.
Hard rested done "Same Proplem Sim wont read".
Cleaning the simcard + tested sim in a other Handy and sim worked there.
EDIT:
Time For Ebay ?
would try other sims if they also don't work I would suspect the sim connector in the phone was damaged
Game Over I Sell it better over ebay.And get a New One.
Thx for your Help.
Hello,
I have had my xperia for six months now. But suddenly three weeks ago my microphone didn´t work anymore. So I went to the T/mobile shop and they sended it to a repairshop. I got it back a week later and they told me it was a total loss. The original Rom was no longer installed on the phone. I used an update from sony ericsson (found on this site). So they didn't repair it. I took the phone back home and put in my sim. The phone didn't have any reach (excuse me for my english). It did when I got in to the shop, so they did something at the repairshop. So I went back and they sended it back the repairshop with an explanation what happened. And I got it back today and what do you think happened? Indeed, no repair no original software. I got P&#%*ssed and went away.
Does anyone have a clue what these problems can be? Is it a software problem? and can I solve it myself?
Greetings from the Netherlands
Allard
Possable Solution?
Hi, i think they didn't fix it it because you must of done a Hard SPL to put a ROM on your X1 from this site. You will need to load the original Rom that came with your phone, and then put the Stock SPL back on your phone.
The links below should help-
Hard SPL to Stock SPL
Within the file that you download, there will be instructions on how to put a hard SPL/ Stock SPL on your X1. Scroll down in the manual and it will tell you how to load the Stock SPL back to your phone.
You will read within the manual that you will need to put the original ROM back on your phone, (the one that was on there the first day you had it).
Information on which ROM is for you can be found here: Original ROMS
You will need to flash a ROM from the "R1A (INITIAL) firmwares" section on to your phone. This needs to be done BEFORE you flash the Stock SPL.
If you get stuck the answers will be in the original post(the links above)
Hope this helps.
Hey guys,
I'm having trouble flashing a new OS on my X1i.
I had to RMA my phone at the start of january due to a display screen failure. Sony Ericsson, a month later, told me that they had not recieved my phone yet and wanted proof that i sent it. After some running around between them and canada post they finally said "our bad" fixed the phone and sent it back to me.
Finally after 2 months, i had my X1i. Alas, i sent them an english OS phone and they sent me back a German OS phone. I called them back and they said they would "escalate" the call and i should expect someone to call me back within 24 hours. Its been 4 days and i havent got a call back. I longer want to deal with them and have decided that voiding my warranty by changing the ROM is no longer a concern.
I downloaded the HardSPL from this thread and installed it
/showthread.php?t=431218
Apologies for not providing a direct link, but new users cant post links due to spam issues
Now my bootloader reads:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
Then i downloaded the English Rom from this thread
/showthread.php?t=475482
APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R2AA010
i renamed the file to
Kovsimg.nbh
Then i formatted my 4gb SD Card with FAT32
then copied the Kovsimg.nbh file to the root folder
then i turned my phone off, unplugged everything from it, inserted my SD Card into the phone and started up the boot loader
however i get an error message saying "no image found"
i tried the process again but with the filename in all lowercase. this did not work either
what am i doing wrong?
Can anyone point me to in the correct direction?
Is there another easier way to do this?
I would greatly appreciate any help.
Thanks,
Ravi
Re:
Hello all,
I did some more reading on the SD method and it turned out i was using the incorrect type of MicroSD card.
I was using a SDHC card before and it was not reading the card correctly. When i switched to my other MicroSD card it worked fine.
Thanks to everyone who was kind enough to spend time getting all of this information together in one place so i could avoid another support call
Cheers
Ravi
There's nothing wrong with using MicroSDHC to flash phones, it's just that some MicroSDHC chip can't be detected by the SPL program.
Although some old phones really can't flash using MicroSDHC, but Xperia doesn't have any problem with flashing using MicroSDHC.
Previously I was using Kingston 16GB MicroSDHC and the "no image found" problem occurs.
But when I switch to Team Group 16GB MicroSDHC, the "no image found" problem doesn't occur anymore.
Yup, it's usually an incompatible or bad SD card that prevents an SD flash.
By the way, if you just want to flash a stock ROM, you don't need to hard-spl your phone. The stock SPL will work. But since you already have hard spl, have fun trying out the custom ROMs! It's the same procedure you did when you flashed the English ROM. Try them out and you won't regret it.
re:
@Tom: Yep, i have a kingston SD card too! it must be that kingson is one of the ones that doesnt work
There's almost a sense of information overload in the roms forum. I'm trying to read up on it and get a handle on all everything but i definately will try. Worse come to worse, and i break my phone, will i always be able to load up the bootloader and flash back to the stock ROM?
Routaran said:
@Tom: Yep, i have a kingston SD card too! it must be that kingson is one of the ones that doesnt work
There's almost a sense of information overload in the roms forum. I'm trying to read up on it and get a handle on all everything but i definately will try. Worse come to worse, and i break my phone, will i always be able to load up the bootloader and flash back to the stock ROM?
Click to expand...
Click to collapse
Isn't that I stated in the SD flash thread that kingston is known for problem.
I had different 16G SDHC and no issue so far for flashing.
Since you already break the cage and HardSPL, isn't that a good time to try cooked rom as well. ;p
haha! that must have been where i got the idea of trying the other SD card and i just forgot i read it. Thanks for posting it.
I've got Touch 10 Extreme Blue downloaded. gonna throw that on over the weekend and see what its like.
But overall i'm glad i got my phone working again.
Oh and i finally got a call back from Sony Ericsson Escalations. The girl that spoke me to said that the place i got my phone from timtechs.com must have got a german phone and flashed it to english and then sold it to me and that act itsef would void the warranty. And then went on to say that i dont have a choice and i will have to simply use it(in german) or sell it to someone else.
So yeah, screw the warranty, its worthless anyway lol
Please can someone help me out here.
My MDA compact V has been playing up and not recognising my SIM after I removed it to copy my contacts onto my new Galaxy S.
I thought I would take it into TMobile store so I used TopazSPLRelocker_SPL133
and flashed the original stock ROM and now my phone starts, comes up with the TMobile bootscreen and sticks.
Cannot connect to Activesync to do anything or install HARDSPL again so i can flash another ROM
I have looked at solutions in the forums and was going to attempt making an HTC goldcard but I don't have a working Windows Mobile Device to read the serial number of the SD card as instructed in the guide.
Can anyone please help or point me in the direction where I can get some help ?
Thanks to all who reply
You can connect through bootloader mode and flash just as with active sync
Thamks for that, after much messing around I have managed to return the phone to the stock release of WM6.5 from TMobile UK
Taking it back to the shop to be sent away hopefully as the blasted thing still will not recognise any SIM that is placed in it ?
Thanks for the help anyway.
Hy guys,
i've a problem with my father's tytn2:
he brought the phone one year ago, and i've discovered that comes with a cooked rom that doesn't work very well (incoming call and wifi problems).
Yesterday (ex leo owner and not totally noob) i decided to try a new rom but i can't understand looking inside the hard drive of the phone if the precedent owner use SSPL or HSPL
of course i don't won't to run the risk to brick the phone, so i decided to follow a guide and first flash a shipped rom then install a cooked rom...
i prepared the files descripted in the noobs guide and try to flash the shipped HTC rom, but after i sync the phone and after i start to flash the phone get out of the sync mode
i can just arrive at the screen with the trasfering file, but the counter stay still to 0% and the phone sync off alone
i do everything with windows vista but i can use XP and seven, if you tell me that there is a stranger incompability...
someone could help me solving this mistake?
i've never had this problem mounting and unmounting the HD2
thanks a lot everyone, and compliments o the chefs for their incredibile job
sorry for the bad english, but i'm italian =)
Mirko.
Kunay said:
Hy guys,
i've a problem with my father's tytn2:
he brought the phone one year ago, and i've discovered that comes with a cooked rom that doesn't work very well (incoming call and wifi problems).
Yesterday (ex leo owner and not totally noob) i decided to try a new rom but i can't understand looking inside the hard drive of the phone if the precedent owner use SSPL or HSPL
of course i don't won't to run the risk to brick the phone, so i decided to follow a guide and first flash a shipped rom then install a cooked rom...
i prepared the files descripted in the noobs guide and try to flash the shipped HTC rom, but after i sync the phone and after i start to flash the phone get out of the sync mode
i can just arrive at the screen with the trasfering file, but the counter stay still to 0% and the phone sync off alone
i do everything with windows vista but i can use XP and seven, if you tell me that there is a stranger incompability...
someone could help me solving this mistake?
i've never had this problem mounting and unmounting the HD2
thanks a lot everyone, and compliments o the chefs for their incredibile job
sorry for the bad english, but i'm italian =)
Mirko.
Click to expand...
Click to collapse
Well you might try to flash off the sd card. Rename your rom to kaisimg.nbh place it in the root of your sd card and then restart the phone while keeping the camera button pressed...and follow the instructions on the screen.
to solve a Wifi problem you can use Wifisychip
so i will try with the spl like arturo says, but i've to found an sd card =)
anyone know how can i solve this problem without sd?
Kunay said:
so i will try with the spl like arturo says, but i've to found an sd card =)
anyone know how can i solve this problem without sd?
Click to expand...
Click to collapse
you can flash SPL activsync you via usb ...!!! before you do it make sure the device has the unlock and remove the SIM card, you can use the XDA Unlock Application