Thus far, I've been unable to use my AT&T Tilt as a wireless modem for my Vista laptop. I've partnered them in the MS Bluetooth Stack, then gone to Windows --> Internet sharing and set it to bluetooth pan and media net, then on my computer, gone to "connect to" and opened the bluetooth pan connection. Unfortunately, at this point, my phone doesn't show up as a devic for bluetooth pan. If anyone can offer up some advice, I'd really appreciate it. Thanks
I would also like to add that Bluetooth PAN also doesn't work for me in XP (SP2). It doesn't show up in the the Bluetooth Device Wizard (the one used to add devices with PAN services), but clearly broadcasting is enabled in the options.
Also, just as a side note, I can't get USB tethering to work either...I'd really appreciate any help I can get with this tethering problem. Thanks.
Got it working. I have no idea why, but for some reason when i tried repairing it for the sixth time or so, vista suddenly decided it had drivers to install for my tilt, and it went ahead and installed the modem driver. now everything seems to be working.
By Bluetooth or USB? Or did you get both working?
Why bother with Bluetooth or USB headaches?? Just use WMWiFiRouter and connect to your phone over Wifi.
Related
has anyone tried internet connection sharing via HSPDA to a PC using activesync or bluetooth yet? any issues?
I use USB/ActiveSync and it works fine.
Just follow the manual. I followed it and got no problem.
One thing though, in the manual, it said "execute 3gnetopt.exe in the PC to optimize it for 3G connection".
It seems, after that it changed the routing automatically and can slow down your internet connection when not using the ICC via PDA.
Well, that's easy, just disable the "additional" network interface in the PC.
i could get the usb internet sharing to work but bluetooth internet sharing doesnt work. my pc is able to detect a local bluetooth pan network without internet access. anyone got their bluetooth/internet to work?
I have internet sharing working via bluetooth on a tablet and laptop (both running XP). First I tried DUN and it worked which suprised me. Then I set up a PAN connection and got Internet sharing running. After that DUN will no longer work, it looks like it trys but then fails. But Internet Sharing is faster and works fine over bluetooth.
It can be tedious at first, you need to create a BT PAN Connection on the PC, you need to create a BT partnership with the Kaiser in your Bluetooth manager on the PC. You need to set the Kaiser's Internet sharing to "Bluetooth PAN" and have the Network connection set to go to your ISP's GPRS internet AP.
Once I have PAN setup on the PC, it's showing "Network Cable Unplugged"
I then Start the Kaiser's Internet Sharing and press connect, it starts a GPRS connection.
I then open the Bluetooth Manager on the PC, select the Kaiser's Connection Icon, right click and select connect.
Then the two devices connect and I'm off and running.
With 3G I have been able to answer calls and talk on my Jawbone BT headset while still connected to the PC via BT as well, pretty much MAGIC
bluetooth still cant work with those instructions, i'll just stick to USB for now.
how do I ensure that HSPDA is working and its not just 3G?
My 3G icon changes to H when it connects hi-Speed. I'm wondering what Bluetooth Stack your PC has, I had issues with my tablet and Hermes until I got new BT Drivers from Fujitsu support. Your PC may need updated BT profiles? My laptop is Dell (uses a Toshiba BT Stack), the tablet is Fujitsu (also Toshiba BT Stack). Just a thought.
On the Plus side, using a USB cable will keep the phone charged, which is good because HSPDA is a power hog anyway.
i'm using a bluetooth dongle with my PC running vista
Both USB and BT ICS work great for me. I've used it on Edge, 3G, and HSDPA.
Both USB and BT ICS work great for me. I've used it on Edge
Internet sharing only working on 2G and not 3G
I am connected right now via internet sharing using my USB cable. However, this is working only if I have a 2G signal showing on my tytnII. When I am in a 3G location, the internet sharing program sits with the message "waiting for network"....this is just after the message "checking USB cable".
I have tried many things including a hard-reset, not having a full sync relationship between the PC, just connected etc. All to no avail.
I am using a new Dell laptop running Vista Ultimate.
Unlike previous PDAs I've had, I don't know a way to force the tytn II to stay on 2G, so when I am at work in a 3G environment, I cannot get internet sharing to work.
Help!
I have just got my Vario III but am having problems setting it up to be used as a wireless (bluetooth) modem for my laptop computer. I am running Vista Ultimate and have not installed any driver software for the phone.
Can anyone please assist?
Wireless modem using Vista and TyTN II
First you should create a partnership between Vista and TYTN II. Then you run the Internet Sharing using Bluetooth and choose the "Connect To" menu at start menu and select connect to a Bluetooth PAN. You should see your mobile phone in the list. Just click connect. Boom !!! You're connected !
BT PAN
I can get Bluetooth Internet sharing to work on my AT&T device it is just a bit clumsier than by USB. With USB I just launch the Internet Sharing app on the Tilt and select PC Connection via USB. I then get an immediate 3G data connection on my laptop. Cool. As others have stated to tethering or extra data plans required.
To get this to work via Bluetooth I must do the above but select BT AND then connect the Network Access Point connection in my BT connections from the PC side. Isn't there some way to get this down to a single connection initiated solely from the Tilt side?
BTW: AT&T Tilt device and ROM, Toshiba BT stack, Windows XP SP2.
Am setting up my Tytn II with a new Toshiba Satellite Pro U300 laptop. I have no problem with syncing via USB but cannot get Windows Mobile Device Center to see the device via Bluetooth.
Half the problem may be the Toshiba Bluetooth software, which takes over the standard MS bluetooth software, although I managed to use the Tytn to share an internet connection without much fuss.
On the handset, when I pair it with the PC it sets up a COM port (COM9) and Wireless Stereo support - should it have another option under Partnership settings or something?
On the PC it sets up a dial up networking connection and a Network Access (PAN) connction, both of which seem to work fine. I can browse the Bluetooth shared folder on the phone or PC without problem, so what am I missing with regards to syncing???
Any ideas would be appreciated, but please document it clearly as I am sure I am missing something obvious.
Thanks in advance
Martin B
Try this, step by step, it worked for me perfectly!
http://forum.xda-developers.com/showthread.php?t=340954
I like to sync my Diamond with my Vista-computer and " Center for Windows Mobile devices" through Bluetooth.
I have a working connection with USB already, but want to skip the cable.
I can pair the computer with my Diamond but the only services I get on the Diamond is "wireless stereo" and "serial port".
Been trying to read every instruction on both the bluetooth connection in Vista and on the Diamond but it seems I cant get the service-choice I need to be able to sync my outlook and so on.
Any suggestions on how to get my bluetooth connection working?
Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html
studz said:
Have a look at the link below for links to a pdf download which has an in depth solution to the problem you're having. It's specifically for the Toshiba bluetooth stack and it works if you follow the instructions carefully. If you're not using the Toshiba stack, I think it should still give you sufficient clues to configure the bluetooth ports to work with activesync.
http://forum.xda-developers.com/archive/index.php/t-412836.html
Click to expand...
Click to collapse
Thanks for the link but when I get to page 11 step 16 in the pdf it says you should get wireless stereo and Active sync. I get wireless stereo and serial port as my choices.
Don´t know if that´s because I use Vista and Center for Windows Mobile Devices (The new version that has replaced Active sync in Vista and that should make it soooooo easy to connect mobile devices instead of Active Sync.
I'm guessing you're using the default Microsoft Bluetooth stack with Vista? If so, ActiveSync should be available when you pair your phone with your PC. If not, check the Services tab for the phone in Vista's BT manager applet, it may need to be ticked in there.
I use BlueTooth with WMDC all the time with my Diamond and it was as simple as pairing then going into ActiveSync on the phone and selecting Connect via Bluetooth.
I´m not sure what bluetooth stack I´m using. I think it´s Toshibas but how can I check that?
I had to install Toshibas application to get the drivers for my bluetooth device and I think a got the stack at the same time.
Is there a way to shift stack if I use Toshibas instead of Vistas default?
Please take a look at the attachement to see my gui for bluetooth, and the Center for MobileDevices (Instead of Active sync) on my Vista machine, and what happens when I connect my Diamond through Bluetooth. Sorry about the language but it tries to install the Diamond as a Bluetooth modem and that´s the only thing I seems to be able to install.
Hi,
I'm trying to use the Bluetooth PAN setting in the Internet Sharing program with a Macbook (Mac OS X 10.5.4). I successfully paired the laptop and Kaiser. I start Internet Sharing on the Kaiser, go to the Bluetooth icon in OSX, click Tilt and click Connect to Network. This doesn't seem to work. Does anyone have suggestions?
I can successfully get it working with Windows XP so I'm guessing it's OSX's fault?
SPL: 3.56 hard
Rom: NotATreoFan's V1 Final (http://forum.xda-developers.com/showthread.php?t=421852)
Radio: 1.65.24.36
Might anyone have an idea, or maybe the better question is has anyone ever gotten Bluetooth PAN working with OSX?
anonova said:
Might anyone have an idea, or maybe the better question is has anyone ever gotten Bluetooth PAN working with OSX?
Click to expand...
Click to collapse
It works for me on a mbpro with 10.5.5. It's been a while since I've set it up, but I don't remember doing anything special to get it working.
Make sure you set your shared internet connection to the correct setting ( Media Net or My ISP )
I have found that tethering using MY ISP works the best and seems to have a tad less latency.
I am running a MB Pro C2D with 10.5.3
My "Hack Pro " is running 10.5.2 and is also tethering with no issues.
P.S.
One more thing. Make sure the phone is set to Visible. Although you can pair it , if its not in Visible mode, it will NOT work
Do you get a connection and it just wont give you an active connection or does your laptop attempt to tether and give a network connection error ?
Here's how I'm trying everything. The device and computer are already paired. The device is visible.
Open Internet Sharing.
Set PC Connection to Bluetooth PAN and Network Connection to MEdia Net.
I tap connect, and the status changes to "Device setup finished. On the PC, connect Bluetooth PAN."
On the Macbook, I click the Bluetooth icon on the menu bar, hover over the device's name, and click Connect to Network.
On the device, the status changes to "Connected."
When doing this in Windows, that's it. I can open up a browser, and the internet is working fine. But on my Macbook, I open up a browser, and I'm not connected to anything. I open up the Network preference pane, and nothing is connected. OSX doesn't see the Bluetooth PAN profile is maybe the problem?
anonova said:
Here's how I'm trying everything. The device and computer are already paired. The device is visible.
Open Internet Sharing.
Set PC Connection to Bluetooth PAN and Network Connection to MEdia Net.
I tap connect, and the status changes to "Device setup finished. On the PC, connect Bluetooth PAN."
On the Macbook, I click the Bluetooth icon on the menu bar, hover over the device's name, and click Connect to Network.
On the device, the status changes to "Connected."
When doing this in Windows, that's it. I can open up a browser, and the internet is working fine. But on my Macbook, I open up a browser, and I'm not connected to anything. I open up the Network preference pane, and nothing is connected. OSX doesn't see the Bluetooth PAN profile is maybe the problem?
Click to expand...
Click to collapse
Ahhhhh When you pair the phone to the mac, make sure you have internet sharing enabled on the phone before you go into pair mode. Otherwise mac osx doesnt see the PAN capability. I think thats what I had to do.
I tried with Internet Sharing pre-connected, but it still didn't work. I did get it working though! In the network connections, Bluetooth does not equal Bluetooth PAN. I went to the little plus at the bottom, and specifically added a Bluetooth PAN interface, and it picked the device up.
Thanks for all of the help!
anonova said:
I tried with Internet Sharing pre-connected, but it still didn't work. I did get it working though! In the network connections, Bluetooth does not equal Bluetooth PAN. I went to the little plus at the bottom, and specifically added a Bluetooth PAN interface, and it picked the device up.
Click to expand...
Click to collapse
Unfortunately, I am on HTC Touch with a WM6.5 ROM, and even though I added the Bluetooth PAN interface manually, my Mac is still not picking up the phone, even though it's been paired successfully and Internet Sharing pre-connected.
OK this is for last year but just in case someone else searches for this a solution I found a while back
Added step open "com port 1" on the WM, not sure where I found that, otherwise the mac keeps "dialing" and the phone says "???? no need to dial, 3G not modem"
These steps work for me on SE Xeperia1 with WM 6.5 and Mac 10.5.8.
http://www.hightechdad.com/2007/05/...sharing-from-windows-mobile-6-to-mac-os-1049/
"Now with Windows Mobile 6, Bluetooth PAN (Personal Area Network) is used. So, if you are on Mac OS 10.4.9, you now have the ability to use a Network Port called “Bluetooth PAN.” Here are the high-level steps you use to enable your Bluetooth Internet Sharing:
1. Turn on Bluetooth and BT discovery on both your WM6 device and your Mac
2. Set up a Pairing between the two devices
My steps + Setup Bluetooth from Phone to Mac. Do it form the phone to the mac not the other way around.
+ Opem Comm port one from Phone bluetooth setup.
3. Enable the Bluetooth PAN port under your Mac’s Network Preferences (Network Port Configurations) by clicking the checkbox
4. Ensure that your devices are “talking together”
5. Start “Internet Sharing” on your WM6 device and click “Connect”
6. On your Mac, it is helpful having the “Show Bluetooth status in the menu bar” enabled
7. On your Mac, from the Bluetooth menu, select “Join Network on [WM6 device]“
8. That is it! (You should have internet connectivity on your Mac, provided you have good signal on your WM6 device). You can even verify that you got an IP address from your WM6 device by going to Network control panel and selecting Bluetooth PAN. Mine shows a 192.168.0.XXX number.
I hope that works. This is a good tip to know if you travel a lot and don’t want to pay for the expensive hotel internet services. Just plug power into your phone and your laptop, connect and you have “dialup” speeds for no additional costs!
If you have questions, write a comment below. If this works for you, DIGG it!
Don’t forget, you will drain your battery pretty quickly and use a lot of bandwidth from your cellular provider (especially if your internet service has a cap)."