Bandswitch - HTC Wings

I installed DHR Bandswitch and forced UMTS connection. I forgot on that for a few weeks and when i was going away from city i noticed that phone does not want to connect to network because there was no UMTS signal.
What i need to do to restore my phone the way it was before, so that i can use my phone when there is no UMTS signal, to connect to GSM/GPRS/EDGE?

reset (warning will reset all info and date!!!)
warning will reset all info and date!!!
not responsible for lost info, data or damages that might occur
use at your own risk!!!
on my t mobile wing
hold the two soft buttons down(left and right)((typically used for calender and contacts in wm6))
with third hand press the reset button on the side with the stylus.
let go of the soft buttons
then press the green talk for yes or red cancel for no

pcmann2004 said:
warning will reset all info and date!!!
not responsible for lost info, data or damages that might occur
use at your own risk!!!
on my t mobile wing
hold the two soft buttons down(left and right)((typically used for calender and contacts in wm6))
with third hand press the reset button on the side with the stylus.
let go of the soft buttons
then press the green talk for yes or red cancel for no
Click to expand...
Click to collapse
Unfortunately this is the HTC s730 known as Wings or Volans, not the T-Mobile Wings. (Confusing yes, section should be s730 to fix this issue hehe)

where would i go to find info apps for the tmobile wing... or the htc twin?

Related

HELP !!!! stuck on windows mobile screen

everything was going fine until i installed blackberry connect, after installation there was a atomatic reset and the phone stopped on the windows mobile screen.
what do i do?
i do have the Kaiser tweak and a few other cab files but nothing major
please help!!!
Hi,
Don't panic!
Just do a hard reset and restore the latest backup you made. You did backup your device right?
Cheers,
Cacti
i have done multiple hard resets(push the little button on the bottom) and never get past the green win mobile screen.
no i havent backed up the phone and really dont care about the stuff on it, i just want it to come back on.
By just pushing the button on the bottom with the stylus you're only doing a soft reset.
You need to hold down the two soft keys on the front of the phone while pressing the soft reset button in order to do a hard reset.
now we're gettin somewhere.
its obviously my first time and i need to know what the send key is
thanks
The send key is the green call button.
hiya, I had same problem, and I've try hard reset and anything else u can think of, there was no way out, I had to ring O2 to seek for help, but they told me blackburry its not going to work on O2 stella ( but I was on dutty's 7 touch rom) , so they replace my phone instead.

Vario III Randomly turning off

Afternoon All,
My MDA Vario III keeps making a noise then shutting itself down. It does this several times a day. A real pain im sure you can imagine! Is there a software fix or am I going to have to send it back to T-Mobile for a new one?
Thanks
Jon
Have you tried a hard reset to remove any dodgy applications you may have installed?
If yes then bodge it off to T-Mo.
and how would one perform this hard reset you speak of?
Im a total noob at mobile devices
For all things Kaiser/Tilt/Vario III, check out the Kaiser Wiki link in my signature.
For the hard reset in particular, press and hold both soft keys on the front of the device, and press the reset button with your stylus. Release the reset button, but continue holding the soft keys for another 5 seconds. The screen will display a warning that pressing "Send" will erase all data. Press the Send button. **This will erase all of your data**

Need advice bad... starting to freak

I was on the site earlier, and decided to install a bunch of stuff for my Tilt. I thought during the time it would be smarter to wait to reboot until all the apps/programs were installed. Upon doing the reset now my Tilt won't get past the initial AT&T screen. How can I reset my Tilt to get it back to normal? I can't access it thru Activesync since it is never starting up all the way just trapped on the intial At&T screen displaying the following please help:
R 1.27.14.09
G 22.45.88.07H
D 1.62.00.00
have you tried a hard reset?
what did you install? Obviously you tried a soft reset by inserting stylus....
Try a hard reset?
Hard reset = hold down both soft keys and insert stylus. If you did it correctly the device will inform you to continue on with tapping the send key twice.
All the installed apps will be removed as well as everything else in the phone. I hope you have your contacts saved to your sim.
Anyone in Tilt world please help
I can't hard reset because I can access the device, if I am understanding you correctly.... can u please clarify?
I thought I was becoming a semi expert but now I'm in trouble I think since I can't get the Tilt to load like normal.... I do have a replacement Tilt @ home I was waiting on screen protectors from. Let me ask should I just pop my battery and SIM out, and install it in the new phone? Will this problem carry on to my new phone or will swapping the Tilt solve?
I am wondering that once I put my SIM and battery in the new Tilt will it just be default and require me to add my apps again?
so I will lose all my stuff but it will free the Tilt.... if I have a backup on the storage card will I be able to restore?
jaycage said:
so I will lose all my stuff but it will free the Tilt.... if I have a backup on the storage card will I be able to restore?
Click to expand...
Click to collapse
Depends on what you backed up. But if installing certain software led you to this, why would you want it back?
I held the soft keys, inserted the stylus, and got the warning message.... yet the phone is in the same place again
no the backup was much earlier just got to happy downloading today
the send is the square button in the middle correct?
jaycage said:
so I will lose all my stuff but it will free the Tilt.... if I have a backup on the storage card will I be able to restore?
Click to expand...
Click to collapse
Relax, you didn't break the phone just do the hard reset as described above. It will reset the phone as it was when you took it out of the box.
At the warning message press the send (green button )
semi pro my ass
which key is the send key?
this is so embarrassing
the green one on older phones its called the "talk" key
redbandana said:
the green one on older phones its called the "talk" key
Click to expand...
Click to collapse
Is there an echo in here ?
yeah that's what I say no but if I remove SIM and battery and put in a new Tilt body will it come back as default..... or can someone send me a facking pic for what the damn send button is on the Tilt?
LOL! wow the send button is the above the windows button and if you dont know where that is its next to the internet explorer button and if you dont know where that is. wow. just wow.
jaycage said:
yeah that's what I say no but if I remove SIM and battery and put in a new Tilt body will it come back as default..... or can someone send me a facking pic for what the damn send button is on the Tilt?
Click to expand...
Click to collapse
There u go.
huh?
dude listen its simple.
Hold down the two soft keys (they may be displayed as calender and contacts on your device) and insert the stylus into the reset hole that is next to the usb port.
If you do this correctly a warning will appear.
Now click send key twice as instructed. It is the green key which is located on the upper left of the shiny silver pad.

Need serious help

Hi guys,
Great forum, unfortunately i can't find a solution for my problem. Here is my problem: I installed Diamond TF3D Config on my phone and i tweaked a couple of things, everything went well untill i changed the TouchFlow menus.
It automatically restarts, but the loading process can't pass the HTC logo screen and now it says:
" The Device is unable to boot because either you turned of the device incorrectly...----- Press SEND to reset your device..."
Well, ofcourse I followed the instructions and pressed SEND, but it looks like it doesn't do anything at all. The error screen above keeps displaying, without anything telling me that something is being done about the problem. Is it doing something or is it just stuck? (The light is continously on).
Can you guys help me? By the way I tried the manual hard reset, but that didn't help.
did you hard or just soft reset?
well i did a soft reset, that didn't work out keep getting that screen.
and I tried a hard reset but that wasn't possible, because i couldn't get in the device, so it pretended it was a soft reset..
but do you know if it is doing something or not , cause i get the screen continously with the lights on
PM the developer... sushilange... and then post the solution here for us all to take benefit of.
Not sure of your full situation, but two options that may help; hard reset, or connecting phone to pc and try running an RUU install; of course all data will be lost, device could be as well.
---- Hard Reset Option ----
To perform a hard reset:
1. Press and hold both softkeys on the device (the little dots above ok, and windows key). Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device.
NOTE: I had no idea which of the many keys were considered the soft keys. They are the two buttons above the phone control buttons.
2. Release the stylus but keep the softkeys pressed when you see the following message on your device screen:
“Do you want to erase all user data and restore to manufacture default?”
3. Slide open the hardware keyboard, and press R to restore to factory default or press X to exit the hard reset process.
Note:
Your device will be set back to factory default settings. Please ensure any additional installed programs and user data have been backed up before a hard reset is performed
--- RUU install ROM --- (this is for the mogul, you'll have to find your own, just reading material)
http://www.htcamerica.net/support/mogul/software-downloads.html
k I will. And this guy has the necessary knowledge?
bjason6 , thanx for your help
but I don;t understand.
hardware keyboard, a diamond doesnt have a keyboard or do you mean something else and where are the two soft buttons i cant seem to find them
This is the proper way to hard reset the Diamond (taken from the wiki):
Switch the device off. Press and hold the "Volume Down Key" and "Action Button" (round button), at the same time, use the stylus to press the red RESET button in the stylus silo. You will be presented with a menu saying 'press R to reset, X to exit'. If you press R, your device will be set back to factory default settings.
Hard Reset will delete all data you have put on the device: Programs, Settings, Mail, SMS, MMS, etc., so be careful and make a backup before doing this.
After a hard reset, you will have a complete clean new install of Windows Mobile on your device.
I thought the phone must be on for the hard reset to work, because I doesnt work on y phone
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Yes, bottom left "phone" button is send
YiuW said:
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Click to expand...
Click to collapse
Nice
Now your tekin the pee mate
YiuW said:
k I will. And this guy has the necessary knowledge?
Click to expand...
Click to collapse
Well he wrote the app, so I bloody hope so
damn what the hell is wrong with my phone man damn...
YiuW said:
damn what the hell is wrong with my phone man damn...
Click to expand...
Click to collapse
LMFAO..... RTFM.... dunno
Anyone suggestions to solve this problem??
It doesn't seem that I can acces my phone via usb
Can you enter bootloader? WIKI
yeah i can
What can i do with the boat loader then?
YiuW said:
What can i do with the boat loader then?
Click to expand...
Click to collapse
Sail away ?

Startup problem

Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars. I do have the kaiser tweak and HTC 5 button homepage thingy. The title bars didn't change right away so I turned the device off and on. Yet when i turned it back on, it freezes on the ATT startup page and displays the three different numbers on the bottom corner, i think they're some kind of IP or radio. Does anyone have any ideas on what is wrong with my phone? I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
chadwick47 said:
Hey, Just recently I tried to change my windows mobile theme, just the color of the title bars.my phone? ....
.....I'ved tried taking the sim card and battery out for awhile and attempted to do a hard reset with the two soft keys and reset button, but nothing happens when I hold the buttons. Any help would be great, I need to use my phone!
Click to expand...
Click to collapse
I'm really surprised that a hard-reset did not restore you to OEM settings...
WHEN you get restored to where you want it... Try: http://rapidshare.com/files/68506785/UI_TWEAK.ZIP
It works awesomely!
It even catalogs all .tsk files and U can export as well.
Best of luck!
trb
just an FYI:
HTC Kaiser - TyTn II - T-Mobile Vario III
A software option is also available. Start> Settings> System> Clear Storage.
Type 1234 in the box and tap YES.
===> OR <===
Press and hold the Left & Right SOFT KEYs and at the same time use the stylus to press the RESET button. Release the stylus but keep pressing the SOFT KEYS until you see the Hard Reset warning screen. Release the SOFT KEYS and then press the LEFT PHONE KEY.
Not from me, credit:
http://www.4winmobile.com/forums/wi...ow-hard-reset-your-wm-device-device-type.html
Just to be clear, the soft keys are those two above the keyboard when the device is slid open....? right? Also should the device be powered on when I do this? How long to I have to hold down the buttons? Thanks for all the help!
Thanks I was able to do the hard reset, I didnt know the correct soft keys.

Categories

Resources