RUU Error 224 - Wing, P4350 Herald Upgrading

I am pretty new at this. I Successfully installed the latest version of Touch-it on my wing. Works great. Now I want to try Open-touch but whenever I run RUU it can't read my device info. Im connected to activesync and I can't figure out why i can't flash again.

Uninstall activesync, and redownload it from the Microslut site.
I had a similiar problem, and that fixed it.

Thanks for the quick response. Tried it and it didn't work. Do I need to do the hard-spl thing again or somthing? Thanks again for your help

Once you've HardSPL'd ... you don't have to do it again.
Take the RUU_SIGNED.NBH from the open touch download, but use the installation files from the TouchIT installation.
So download both of them. Go to the TouchIT folder, delete the RUU_SIGNED.NBH file, and replace it with the open touch one.

still the same thing is happening. I get to the part where it says "verifying the information on your PDA phone...please wait..." and then i get error 224

What does the error say exactly?

here's a screen http://picasaweb.google.com/dave32knights/UntitledAlbum/photo#5158904248912330642

also I tried it from my laptop and the samething happened

Did you try running it from bootloader?

Working
duprade said:
Did you try running it from bootloader?
Click to expand...
Click to collapse
Awesome its flashing right now. Thank you so much for your help

Cool.

I'm Back
so i successfully installed open touch and i like it. but now when i try to install any .cab file i can't even get it to ask me where i want to install. it just starts the cab, looks like its gunna work for about 1 sec, and then abruptly ends.
any help?

Nevermind I think i figured it out

You should direct that at the threads for Open Touch
[Release] Open Touch v2.6 | T-Mobile Wing!
[Out Dated!] Open Touch v2.4 - T-Mobile Wing!
Discussing Open Touch v2.5
depending on what you installed.

haha. I was typing up an answer the second you posted you figured it out! haha

Related

BETA Touch-IT wwe P4350 (Build 18125.0.4.2)

Ok guys, I have been neglecting p4350 too long now, so here is a brand new build, ported from latest release of kaiser, and this the wing guys dont have
It got 4mb pagepool
all usual apps I put in, ill make a list tomorrow...
but whats new in it is
new comm manager
romsettings
htc touch dual album
htc touch dual random access (new contacts manager)
htc touch dual keyboard (cool new way of fast typing)
htc home, customize it
newer touchsettings with custom weather setup (online)
htc networkplugin
onenote mobile 2007 (and ofcourse office 2007)
sms backup
Ill put up some screens tomorrow, its quite late here now, so im off to bed.
Ill try update this post alot better tomorrow..
But, to wing users:
Please dont report "bugs" here that you experience with your wing with this rom, because its not ment for your device.
The bugs you have might not be present in p4350.
Download:
Rapidshare
If someone could do me a favor and upload this to some mirrors, it would be great, cause not everyone can access rapid, and im to tired, im off to bed
cheers
I thought u forgot about Us, anyway I'll give it a try when i get home. can't wait.
awesome. can't wait to try it.
I have a few queries...
I flashed my dopod c800 with the touch it final , now activesync reads my phone as a HTC P4350. Can i flash it again with this new touch it?
Installed without a hitch.
How do I access htc touch dual random access (new contacts manager)?
It doesn't show up in Rom Settings.
How'd u use rapidshare?
Maybe u could use megaupload?
How do u use rapidshare?
I wanna flash but i cant get the file.....
Installed with no problem, apps and ppc running fast no overclock, camera work, office works, commgr works well, touch flo work, htc album is GREAT, window player works, my email works, i connected to my work outlook inbox. randon access dont work changing contacts in romsetting does nothing right now bout to install pocketcm, I don't see onenote present, the touch keyboard works sometime, keyboard symbol r messup i push a and get ?. if i come acroos any problems i'll post them but for now this work great.
before I got to work.
I must state again, incase someone with a wing accidently stumbles upon reading........
I do not understand why wing ppl keeps pushing that there is keyboard bugs in the p4350.
THERE IS NO KEYBOARD BUG
please, stop reporting it, the wing is built diffrent
IF YOU USE THIS ON WING YOU WILL GET A MESSED-UP KEYBOARD
have a nice day
cheers
Craps
How long does the flashing take? Mines been running for almost an hour..
Pulled the plug while flashing..
Then it bricked.... But, it was unbricked in the next 5 mins. Have to try flashing all over again.
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Beta not usable with dopod c800
Flashed twice and bricked it twice....
At last!!!
I have been connecting here everyday in order to find this post and finally here it is!
downloaded and ready to install.
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
thanks..
..for your great work.. tonight i install it!!!
edzilla said:
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
Click to expand...
Click to collapse
lol yeah..ill add it in final
madds said:
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
Click to expand...
Click to collapse
use tf-settings in programs/touchflo choose there how to activate, then soft reset
punkcell said:
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Click to expand...
Click to collapse
lol, that is the read me for wing, sorry about that
This rom is not built for wing, even though it might work, it might not work for wing

Help! phone won't start...please!

hey, im a newbie, and I need help...
I was trying to install TouchIT so I downloaded the applications needed from a zip file I found here on the website...
I installed ASerg Policies, Cert_spcs, and Enablerapi and did a soft reset...cause I thought I needed all that....
...than I tried to run "1__UPGRADE_ROM" and in the middle of that process, i dropped my phone, and caught it b the cable, so it got disconnected, and it gave me an error message...the screen then froze so I tried a soft reset, and it got stuck on the T-Mobile screen....I waited a long time, than did a Hard Reset, and it is still stuck on the T-Mobile screen....I can't even wake up tomorrow cause I use my phone as my alarm clock...but I have no clue what to do...can anyone help?
"run the official RUU FROM HTC" I don't really know what this means, ..but I think I need to be connected to the computer to do that, and my phone is not even doing that...
thanks for ur help....
run the official RUU FROM HTC >> download the official ROM from HTC or from the XDA Dev FTP.
Turn on your phone on bootloader mode ( see the wiki to do that ) and run the ROM Installer.
If you have already installed the HardSPL you must extract the installer of the official ROM ( with WinRAR for example ) and delete the "SPL.nbh" file. Then run "ROMUpdateUtility.exe" to flash your phone.
Have fun
Please do not cross post. I answered you in the other post. Please do a search on "official brick" and set it to threads created by me, ivanmmj.

Can you install Tmobile RUU with hardspl? need help plz

My phone has been going haywire for the last month. Its extremely pissing me off. It'll restart all the time by itself and now it thinks the enter button is stuck so trying to do ANYTHING wont work because enter keeps opening whatevers selected..
so I got my replacement in the mail from tmobile today, and I wanted to flash the tmobile ruu back on my old wing before I sent it back in. I downloaded the new version off tmobiles site and it had an error during install. Doesnt seem like the ruu is going to load over the open touch I've got on there now.
Suggestions?
TylerC161 said:
My phone has been going haywire for the last month. Its extremely pissing me off. It'll restart all the time by itself and now it thinks the enter button is stuck so trying to do ANYTHING wont work because enter keeps opening whatevers selected..
so I got my replacement in the mail from tmobile today, and I wanted to flash the tmobile ruu back on my old wing before I sent it back in. I downloaded the new version off tmobiles site and it had an error during install. Doesnt seem like the ruu is going to load over the open touch I've got on there now.
Suggestions?
Click to expand...
Click to collapse
Did you try this thread? http://forum.xda-developers.com/showthread.php?t=364543
waynehathaway said:
Did you try this thread? http://forum.xda-developers.com/showthread.php?t=364543
Click to expand...
Click to collapse
I missed that thread. Thanks!
use flashcenter (uspl) with the tmobile rom)
my understanding...was that...to get rid of hardspl, you needed to use the uspl or flashcenter to flash the original tmobile rom...and it'll write over the hardspl.
Well I went through it, and everything was going as the installer said it should, but when the update utility started to run to flash back the old ruu it gave me a connection error and quit.. I suppose I'll give it another shot.
I actually extracted the files from the newest Tmobile ROM and just used the flashcenter to put it on my HARDSPL'd Wing. It seemed pretty quick to.
But you can try this here then flash the newest ROM
http://forum.xda-developers.com/showpost.php?p=2008521&postcount=308
damnitpud said:
I actually extracted the files from the newest Tmobile ROM and just used the flashcenter to put it on my HARDSPL'd Wing. It seemed pretty quick to.
But you can try this here then flash the newest ROM
http://forum.xda-developers.com/showpost.php?p=2008521&postcount=308
Click to expand...
Click to collapse
so you just updated your ipl & spl but then flashed a custom rom?
or did you flash the new tmobile rom then flash a custom?
I was getting the connection error as well, I restarted holding down the camera button to go to the bootloader, then run the t-mobile rom.
Hey sorry for the long time without replying. But i did a search for my posts and noticed i never answered back here.
What i was talking about is, if you use WinRaR you can extract the Tmobile exe file which gives you the flash center files, SPL.nbh and RUU_Signed.nbh. With the phone hardSPL'd you can just run the ROMUpdateUtility.exe and it will install the OEM WM6 from TMobile.
Nice and easy eh?
To extract an exe file with WinRaR, you have to right click the file and choose extract files.

Blackstone down... need assistance

Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Read the dummies guide http://forum.xda-developers.com/showthread.php?t=505377
Post anything further in that thread, no need to create new threads.
haqx said:
Hello,
I need some help with my HTC Blackstone. After numerous attempts to upgrade my ROM to Miri_WM61_21054_Manila_2.5_V2.1.rar and EnergyROM BLACKSTONE 20090829 StandardM2.5.rar (WM6.5) I succeeded in “breaking” my phone.
My ROM version was 1.56.401 (installed the update from htc.com: RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe).
First I tried the EnergyROM using the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe but I kept getting the 262 and 260 errors. After I downloaded the Miri_WM61_21054_Manila_2.5_V2.1.rar and also tried with the HSPLWrapper_Blackstone_156OliNex.exe and SSPL-Manual-TouchHD.exe and I kept getting the same errors. Then I had the brilliant idea to try the BlackstoneRUUWrapper.exe that was in the Miri archive. The progress bar went from 0 to 100% in 3sec and then I realized that I did something bad.
Now everything is in green tones on my display but when I turn it off and then back on the colours come back to normal. Also the Windows is working very very hard. I managed to sync it with the PC and install the ROM from HTC website RUU_BlackStone_HTC_Europe_1.56.401.0_Radio_52.62.25.34_1.13.25.24_Ship.exe but I have the same problem.
Can somebody please provide a solution to fix my phone.
Thanks
Click to expand...
Click to collapse
connect ur phone in active sync mode with ur pc.
then run the HSPL olines wrapper.
ull enter a tricoloured screen which will say 1.56.OLINEX.
disconnect and reconnect ur USB cable.
Run the EXE in the downloaded ROM.
ull be ready with the new rom..
this is assuming u have Win XP. for other OS u need to dnload drivers from the thread mentioned in the above post.
Generally speaking if you are experiencing discolourization it is because your SPL is incorrect.
Check your SPL in bootloader. Then follow this guide. Any future queries regarding flashing should be posted in that thread and myself or others will help you. If no one responds PM me and I'll respond next time I'm online.
Thread closed
Ta
Rick

Hardspl, ApplUnlocker, Romupdate

Ok, i've tried everything that i've read in these threads, but am not having any luck.
I've got an HTC Breez (rom 1.13.251.2, radio 1.06.00.10, spp -2.05), and i'm trying to update it to WM6.1.
i've tried to use Hard SPLV7, which tells me that my phone needs to be application unlocked.
Then i tried to use AppUnlock-Check.zip (ApplicationUnlock.exe) to unlock it. But that tells me that my phone cannot be unlocked.
So, can someone please help me to prepare my phone to be rom updated? Please? This WM5.0 is not very nice!
thanks in advance for any help.
Ok, some progress. Based on this method i got the phone application unlocked.
However, when running the Hard-SPL-V7 it runs through until i give the last ok, then looks like it's running, then crashes. So no luck there.
Question: i am assuming that i need hard-spl prior to loading a new (WM6.1) onto the phone, correct?
thanks.
Hello out there. Is there no one that can lend me a hand? A hint?
He,,
You still need help?
Wich windows are you using? rom update only works with winXP...
You can search for updating using sdcards
Ah, hello!
I am using Win xp, and it did not work. Can you tell me exactly which version of Hardspl i should use?
thanks
You could try this one:
http://forum.xda-developers.com/showthread.php?t=552567
Tell me if you got hard SPL to work with this one. Follow the instructions on that page^^
There is also an update program wich automatically put your phone in sspl mode:
http://rapidshare.com/files/110014028/MTeoR-FutureShock-WM61-1.61.0004.0.rar
But,, if I where you I should first put Hard-SPL on your phone couse else you could brick your device.
Hello, and thanks for this. Problem is that the only SD card that i have is 4 gb, which does not work with the breeze!
Do you have any other way of making the 1st method work?
thanks for your help.
Download both files of my post above.,, In one of them you find the update program. In this folder you found an NBH file or something.., Delete this one and copy the NBH file of the other argive to this folder. I'm not sure if you have to rename it to the name of the NBH file you just deleted...
Connect your device over usb with active sync Then run the bat file.
Hmm, does not work! Any other suggestions?
Does active sync connect to your phone?
Wich application unlock tool did you use?

Categories

Resources