Database Develop

Help Help Help!!!! upgrade failed!

I tried to upgraded my SX66 system and radio rom. When I clicked "next" on the Blue Angel Flash ROM Tool to start up upgrade, the pocket pc screen turned off and my desktop was diconnected with the pocket PC (activeSyn showed "Not connected". And the desktop showed up the message "Cannot recognize USB device". I took a look at the PPC, its backlight was off and only had a message "USB v2.07" showed up". I tried to reset the PPC, but it is not working anymore, only show the message "serial v2.07". Any one help please!!!

DONT PANIC!
Try a hard reset, thats power button and reset switch at the same time..

Charmer crashe --> Cannot connect via USB in Bootload

Hi together,
I tried to flash my Charmer with a WM6 ROM. That failed, so I wanted to do a Hardreset --> Factory defaults. This failed because no OS was detected and it hangs up at bootscreen.
Going into Bootloader (3colors) and tried to connect via USB, the Bootloader shows me "USB" in the left corner, but if I start to flash an official ROM it says "ERROR 260 - Cannot connect to Device"...
Charmer seems to die... Several tries, no positive result...
While normal boot there are only shown 3 lines, but NO OS Version is shown up... Maybe no OS found???
What chances or possibilities do I have to get ANY OS on my PDA??
Heard something about flashing from SD??
How does it work, where can I find suitable Software/Manual for this? I do not have any ROM-Backup or something like that...
Help mee pleeeease...
I want to get my charmer reanimated...
Thx so far
bye
domi65

error 270 during HTC p3600 rom upgrade

When I try to make new ROM upgrade it stops at 1% and the device enter the tri-color bootloader window and in my PC it shows " ERROR [270]: update error " . I try it more than once and try it also with different ROMs , I got the same problem. so does any one can help

Try to upgrade your SPL : look HERE

Can't flash my new wizard

Hey,
i bought a htc wizard (orange spv3) yesterday, and it looked brand new.
with lokiwiz .31 i removed sim lock. And today i wanted to try unlocking the cid. but when i try to flash it to the button 1.5 rom the ruu.exe ( crashes). i tried it on windows 7 and in xp it says error 260. So i don't know what to do now.. when i reset the device he is going again but not flashed. and i hate windows mobiel 5
it's a g3 device
with aku 2
edit: tried the vista way, but he then says: invalid vender id..

This is from the manual:
ERROR [248~260] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
This is what I would do:
Turn the phone off and remove the USB cable.
Press and hold the Camera key, now insert the USB cable, Keep holding the camera key until you get the boot loader screen.
Now flash the ROM.

i now know why the error accured, i flashed it in the xp mode, not native windows xp.
i now did it at a friend's place and it's working now.
hope to get the vista flasher work under 7 but the service don't remain the same in 7 so i don't give it much hope. i get a wrong vender in 7

Help with wizard ROM image
-MyHTC-,
I sent you a private message.
Could you please help ?
I'm facin a problem with my Wizard after a WM 6.5 ROM flashed.
Hard reset not working.
Is an alternative save an ROM image @ the SD card and then flash using bootloader ?
Tks,
Cássio

cassio gebara said:
-MyHTC-,
I sent you a private message.
Could you please help ?
I'm facin a problem with my Wizard after a WM 6.5 ROM flashed.
Hard reset not working.
Is an alternative save an ROM image @ the SD card and then flash using bootloader ?
Tks,
Cássio
Click to expand...
Click to collapse
I sent you a PM

[Q] Possibly bricked Trinity, help please!!!

Hello!
I have this problem:
I've installed WM6.5 on my Trinity, and it worked well, but today I wanted to try WM6.1 (0.4.9.0 digital) also. The following happened:
Everything worked fine, but at 54% flashing my brother lifted the phone, possibly it lost the USB-contact, because the flasing stopped with an error message (unfortunately can't remember the error number). Since then if I try to flash it with WM6.1 or WM6.5, after 1% the phone resets itself, and the RUU gives a 270 error.
I have the original WM5 ROM also, but if I try installing it, after "Verifying information on your PDA Phone" screen I get a connection error 260.
What can I do???

After the phone resets itself, I can see the HTC logo, and the red letters and numbers, but that's all.

If I try HardSPL, I also get a 260 error.

Can you enter bootloader manualy?
If you can than see SERIAL change to USB when connected to PC it should be OK.

if you have a SD card, you can also try to flash "manualy".
- put your RUU... NBH at the root of the card,
- rename it trinimg.nbh,
- reinsert the card in the phone,
- enter in bootloader (power+cam+reset)
you will have a grey screen asking to push "power", do it and that's it.
if USB is well working, maybe you just need to reflash the hardspooler.

Thank you for your replies.
Fortunately I solved the problem.
I did the following:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/atta...0&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/atta...8&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection

I m glad you solved this. Every day another new way of solving the flash problems.

Hi to All guys
i've got a trinity from my work and it has a custom rom.
I wanted to changed the rom so i download a wm 6.5 and erase the trinity with mtty. After that i try to install the rom with he RUUUupdate, but it get error 270.
Only in that moment i read on the bootloader and see that it haven't olipro or another HARDSPL installed.
So i looked for a solution and i try the unbrick with the splxploit. I did it and i get olipro on the bootloader, but i don't know how go on with install, if i use the exe i get 260 connection error.
Can you help me?