How to upgrade from vodafone to 2.27 APAC without sd?! - Palm Treo 750 ROM Development

How to upgrade from vodafone to 2.27 APAC without sd?!
Ok... it's hard spl-ed and unlocked... it has the stock 2.23 vodafone and i want the latest... i don't want to use an sd card.
Solutions? The normal updater does not detect my device...

use this tool...
KaiserCustomRUU.exe

hey thanks!!!
1. got one from over at the kaiser section.
http://forum.xda-developers.com/showthread.php?t=364048
2. deleted the included RUU_signed.nbh
3. and copied mine from 2.27
4. entered tricolor boot screen
5. connected to usb and flashed!!!
worked like a charm

Related

Stuck in Bootloader

Hi,
I've flash my phone to the Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full ROM and after several Soft Resets my M700 is stuck in the original bootloader screen.
My USB port does not work so I copied the des bootloader and ROM onto ny SD Card. Launched the des bootloader and the the ROM was flashed successfully. After some soft resets to change various registry settings the device is now stuck in the original bootloader screen (SPL-1.07.0000).
I've tried to flash the ROM again but it goes to a grey screen saying "loading" then displays "000068002". I've tried various ROMS and get the same error code.
As the orginal bootloader is displayed I think it's looking for a ROM with the same CID. The phone is a UK Orange M700.
Does anyone know where I can get the Orginal UK Orange ROM from? I've tried the Mozzer one without any luck and found French ROM gives me the error message "no allowed".
Hard Reset does not work, just takes me to the bootloader screen and I've left the battery on overnight.
As the USB does not work I can't use mmty to reset the device.
Please help
Thank you
Look on the Trinity WiKi and use the CD card flash method. This will allow you to flash without using the USB. Works every time
I can flash from SD card, but as the original bootloader is loaded I need ROM with CID from Orange UK
Oh... you need to unlock your phone first. That is probably where you are running into your problem. or you could try downloading your OEM rom and flash that using the sd card, then unlock, then have at it with a cooked rom
Has anyone got Part02.raw dump from an Orange UK M700. I might be able to build a new ROM if I can get my hands on one.
Thanks
Maybe you will find here
Here is the thread:
http://forum.xda-developers.com/showthread.php?t=308152
Here is the full dumped rom:
http://forum.xda-developers.com/showpost.php?p=1281918&postcount=14
And here is the Orange splash screen:
http://forum.xda-developers.com/showpost.php?p=1284708&postcount=22
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
moodog101 said:
Hi fktsndr
I've tried those without any luck.
I've bitten the bullet and have sent it off for repair.
Click to expand...
Click to collapse
OK, if you get it back I suggest you to replace the original spl to hard-spl!
With hard-spl you will not stuck in bootloader any more.
But of course you can restore the original spl
Yep,
have learnt my lesson and if the phone is repairable then I'll Hard-SPL it and take a backup of my ROM.
Cheers for the help
One last question
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
moodog101 said:
mobile phone couldn't fix it so looks like a trip to Orange which could be pricey, but one last question. I have various nbh files for the M700 but they all have the wrong CID. Do you know if it's possible to change the CID in a nbh file so that I can use it for Orange UK (ORANG001)
cheers
Click to expand...
Click to collapse
Unfortunatelly I do not know. But hard-spl ignore cid, so you will not have cid problems.
About NBH, you should ask Ervius in this thread (he is a rom cooker):
http://forum.xda-developers.com/showthread.php?t=320504

M700 Orange Bootloader

I have to send back my phone to Orange as one of the buttons has stopped working. I have managed to put a backup of WM5 back on the phone (was running WM6) but it still has the HTC bootloader on it. Is it possible to get the Orange bootloader back onto the phone?
I just used the Orange rom and flashed back to wm5, sent it back to Orange and they sent out a replacement phone.. I suppose u could flash to a rom without a bootloader and then flash the Orange backup if your really worried bout the HTC spalsh?
Rob_Quads said:
I have to send back my phone to Orange as one of the buttons has stopped working. I have managed to put a backup of WM5 back on the phone (was running WM6) but it still has the HTC bootloader on it. Is it possible to get the Orange bootloader back onto the phone?
Click to expand...
Click to collapse
HSPL is protected against being flashed by other SPL.
Use SSPL to write a new SPL...
My SPV M700 was running Schaps ROM and has crashed [again] to a blank white screen so I guess I will have to send it back to Orange and need to re-load the original Orange ROM - where can I download it from?
Never mind, I found the file name for the ROM and located it here: -
http://forum.xda-developers.com/showthread.php?t=309959

Application UNLOCK/SSPL/HARDSPL

!!! USE THIS GUIDE ONLY IF YOU KNOW WHAT YOU ARE DOING !!!
!! READ THE END OF THE GUIDE FIRST(Very Importnat)
Aplication Unlock - lets you run unsigned software
SSPL - Software Second Program Loader is a boot loader after IPL (Initial Program Loader) often seen on smart phones and PDA:s.
- Lets you flash any rom on the phone
SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
[B]official HTC ROMS[/B]
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
UNLOCK TOOLS
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html
1. Folder "1"
put the file "SP_AllowCertificateInstall.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
2.Folder "2"
make sure you are connected to the phone threw active sync. Now run "EnableRAPI.bat" it will say if
it has succeded.
3.Folder "3"
make sure you are connected to your mobile phone through active sync. Start "MobileRegisteryEditor.exe"
Now go to SPV_C600 than HKEY_LOCAL_MACHINE than Security than Policies than Policies
so that you are in HKEY_LOCAL_MACHINE\Security\Policies\Policies
Now dubble click 00001001 (the first one after (Default)) and change the value to 1
Now dubble click 00001005 (the second one after (Default)) and change the value to 40
4.Folder "4"
put the file "Cert.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
5.Folder "5"
install and run HTC Security Manager.msi
select Security Off
Wait
YOUR PHONE IS APPLICATION UNLOCKED
6. Restart the phone
press and hold CAMERA+POWER while powering
you should see spl version
NOTE THAT VERSION
PULL OUT THE BATTERY AND POWER THE PHONE
7.1 Try to flash wwe rom directy
if you have wwe use sspl 1.01 http://forum.xda-developers.com/attachment.php?attachmentid=38680&d=1178637546
WWE rom
http://rapidshare.com/files/106091341/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
now you have SPL 1.10 and CID HTC__Z12
jump to step 8
7.2 If 7.1 does not work try
7.2.1.SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
now you have SPL 1.10 and CID HTC__A07
7.2.2.you need to run the RUS update
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
jump to step 8
8.flash any rom
now to flash an rom use SSPL 77.7 http://rapidshare.com/files/106072098/SSPL.rar.html
Copy the coresponding SSPL to the ROOT of the PHONE not the SD-CARD
run SSPL on the phone and immediatly press CAMERA+POWER
YOU SHOULD SEE TRI-COLOR SCREEN displaying spl 77.7
This SPL is allowing you to flash latest radio
or to Flash any rom usin sspl 77.7
Run the update from the PC
VERY IMPORTANT
i found a way to installl hardspl
1. unplug phone from usb
2. take out the battery/put it back
3. enter bootloader (press camera+power)
4. check for spl if it sais 2.05 you can go further if not read the fisrt guide
5. enter in windows
6. extract and copy to device root http://rapidshare.com/files/138396463/breeze_HARDSPL.rar.html
7. copy to storage card root BREEIMG.NBH
8. it should say SPL-1.01
9. follow onscreen instruction for the update
10.enter in windows and delete BREEIMG.NBH from card
11.enter bootloader (press camera+power)
12.it should say spl 7.77
13.be happy now you have hardspl and you can flash any rom (without sspl)
BEST REGARDS
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using SDA security unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Please bear with me, because i really do not want to brick my phone.
Admin, please make this thread sticky. cheers
alexnvidia said:
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using XDA unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Admin, please make this thread sticky. cheers
Click to expand...
Click to collapse
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
jerpelea said:
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
Click to expand...
Click to collapse
im going to flash to WWE now with this version : HTC MUI BREE100 1.34.251.1 1.38.00.10 32.71.7020.12H 15673.3.3.1 3.3.1 2.002 1.10.0000 , then update to your WM6.1.
am i doing the steps right?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen close blank and nothing happens even though im still pressing the camera+power button. what should i do now?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen goes blank and nothing happens even though im still pressing the camera+power button. i had to unplug the battery to restart the device. am i doing anything wrong here?
Update : Now i got it. i had to run the SPL link, not the SSPL.exe as written in the first post. must be a typo.
Update2 : Success!! flashed to WWE. now proceeding to your WM6.1!!
Update3 : Running WM6.1 B1 now! thanks jerpelea! you're the man!
Admins please make this thread sticky.
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
caglar_altan said:
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
Click to expand...
Click to collapse
all roms work
follow the guide and will work
rom
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
caglar_altan said:
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
Click to expand...
Click to collapse
Hi, I had the same issue. Try pressing camera & off' buttons AND Enter all together.
rom update
1- I have updated the current rom to origininal config by manufacturer's original ROM.
2- I applied HTC unlock tool..
3- My first attempt to update rom gave #262 error. Second attempt was succesful.
thanks.
futureshock said:
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
Click to expand...
Click to collapse
there are 5 keys unless you have the official security configuration manager
that is setting the other keys for you
BR
HARDSPL
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
jerpelea said:
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
Click to expand...
Click to collapse
That sounds interesting..!
alexnvidia said:
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
Click to expand...
Click to collapse
no
you must get to windows
what is your current cid?
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
alexnvidia said:
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
Click to expand...
Click to collapse
you can not do anithing
your ipl does not know how to load spl1.09
send the phone to repair and flash hardspl when it returns
there are many people with your problem
till now we have found not found any solution
BR
my phone is out of warranty, so sending for repair will cost me a lot. we'lll keep our fingers crossed and hope you guys can find a solution for us soon. thank you
i think, SPL version is very confusing. 2.05 is older than 1.09?
Would be good to have compatibility list between SPL and IPL versions to not mess and brick device.
I guess i was lucky, because i updated my breeze to resently posted HardSPL (thanks to jerpelea) and device still alive.
I found that RUUUpdateUt.exe i've used for DES SoftSPL is not working with HardSPL anymore. It cost me a bunch of my nerves (no body mentioned this fact!). Again luckily i found that stock RUU upgrade utility works fine with HardSPL (i just removed all dialogs except first for convenient use).
Well, at last, now i don't need to flash stock firmware (with radio ROM update which is extremely dangerous) every time when one of my cooked ROM refuses to work normally.

sony update service: no update available

i'd like to restore to a valid update from the sony update service.. so i restore my stockspl successfully , loaded update service however it says there is no update for my device.
currently i have x1_firestorm_v5.0.28005LEO-MAX ... it works well however like i said above i need to restore to the original sony firmware
i dont know why it says no update is available?
pls help?
u flashed stock spl without going back to an official rom first?
nevermind here are all the official roms:
http://forum.xda-developers.com/showthread.php?t=475482
ok i downloaded this one
but its a .image file.
what or how do i use this image file?
can i rename to nbh and ???
APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.image
got it.
renamed to ruu_signed.nbh and added romupdateutility.exe.
first time it failed for some reason at 10%
tried again with success
u update your phone while using stock spl?
i installed STOCKSPL 0.72
on the colored screen it says:
KOVS110
SPL-0.79.0000
MICROP1-707
MICROP2-707
updateservice says i am at the latest, R3AA010
is this the latest?
is there a ROM with arabic localization?
because when i bought the x1 i remember it had a button that said "iTouch"... i backed up that rom but damn it doesnt work. the backup i made DOES restore just fine but it doesnt go back to the way the phone was when i bought it.

Wing stuck in bootloader

Hi :
I have a wing which I flashed with Open Touch yesetrday. Don't know what went wrong during flashing, now my mobile is stuck in bootloader 3 color screen.
When I try to flash othr ROM from SD card it says "invalid certioficate" error. Can anyon tell how to flash other ROM from bootloader.
Regards,
pankaj
Flashing phone from bootloader mode is realy the same. Just your Wings doesn't connect with AS, but it doesn't matter. Just run RUU and wait for finding your phone...
If your phone is HardSPL, you can flash ANY ROM, but if not - only shipped ROM, dedicated to your phone. Here you can find fiew shipped ROMs for Wings
Edit:
Your phone is HTC Wings or Wing??? It's a big difference. This is Wings (HTC S730) forum

Categories

Resources