I have an issue with the spacebar. Everytime u press the space bar it doesn't actually register the space on screen until you LET GO of the space bar button. That is, press down and release. Every other button just waits for the press down, but for some reason the space bar is on a slight delay.
This causes many of my words to run together: liket his.
Any way to fix this issue??????
Space bar action
redsrule2500 said:
I have an issue with the spacebar. Everytime u press the space bar it doesn't "lock in" the space on screen until you LET GO of the space bar button. That is, press down and release. Every other button just waits for the press down, but for some reason the space bar is on a slight delay.
This causes many of my words to run together: liket his.
Any way to fix this issue??????
Click to expand...
Click to collapse
My Tilt doesn't seem to do this - the spacebar is stiffer than the other keys, but when I press it firmly I see the cursor immediately jump forward.
So I'm guessing you have a hardware problem.
hmm...it really doesn't feel like a hardware issue. The spacebar pushes down and up fine, it just seems like its progrmamed to "SPACE" upon release of the key, rather than press-down.
if you hold it down it will start repeating spaces, though...just takes a little longer than other keys....
Since you're running Dutty's Rom, I'd suggest it has to do with the XT9 settings of the ROM. Download a cab from Dutty's server called "Disable_XT9.cab" and run it. Should fix your problem (did so for me).
Good luck.
H.
lesevich said:
Since you're running Dutty's Rom, I'd suggest it has to do with the XT9 settings of the ROM. Download a cab from Dutty's server called "Disable_XT9.cab" and run it. Should fix your problem (did so for me).
Good luck.
H.
Click to expand...
Click to collapse
I installed the cab, but I don't think it fixed the problem!?!
Is there any special instructions !?!
What about shaps rom? 4.31?
Oops, guess you have to restart for it to take effect!
THANKS!!
Hi,
According to Laurentinus, this lag is possibly related (at least in WM 6.1) with Screen / keyboard drivers and, possibly with HTC home…
He claims that the problem is solved in his new Rom LS V4…
More information here:
http://forum.xda-developers.com/showthread.php?t=366014&page=37
Cheers
I have this problem on the HTC official rom running on the tmobile variant,
have to live with it i guess!!!!!
I have the same issue on my Tilt with the original AT&T ROM and Dutty's ROM. Very annoying. I was almost ready to go get a Blackjack 2 instead, but now I see the new AT&T ROM that I"ll give a try.
lesevich said:
Since you're running Dutty's Rom, I'd suggest it has to do with the XT9 settings of the ROM. Download a cab from Dutty's server called "Disable_XT9.cab" and run it. Should fix your problem (did so for me).
Good luck.
H.
Click to expand...
Click to collapse
http://forum.xda-developers.com/atta...0&d=1198925369
I just installed Duty's disableT9.cab fix and here is what happend:
1) space bar now responds as soon as you push it (not on the release)
2) my spell checker kicked in, and also names of people in my TO address automaticly searches.
This is how it was with WM6.0 and i liked it. Everyone using dutty's rom needs to install this fix to get their keyboard spacebar and spell checker to work right!
Related
Hello all!
I have a question about some issues I am having and I am wondering if they are common and can be fixed or I am making a mountain out of a mole hill.
I am running Dutty's DualTouch Rom v4 (which is awesome BTW) on a AT&T Tilt
but I have some issues I am running into:
1. When I type @ I get ! and when I type ! I get @, is this a common thing? it also happens with other keys that I am still finding out about. Can I remap the keys to be correct? Will Shaps Advance config 1.1 do this for me or I am misunderstanding that program?
2. On the home screen from the HTC Home plugin if I go to mail it opens up Outlook just fine, then I go back to the home and check my SMS and it brings it up fine. But when if I check my mail again it defaults to the SMS folder and I have to change it every time to Outlook, is there a fix for this?
3. Touch FLO is always different, if I swipe left I will get contacts. If I swipe left again I might get contacts but I might get something else, I have tried it many times and almost every time its different. Is there a way to make it so whenever I swipe left it always beings up the same thing?
4. If I want to change the Splash screen, do I need to put HardSPL on again and then flash it? or can I just do it now that I have Dutty's on there?
Thanks!
mlabate said:
1. When I type @ I get ! and when I type ! I get @, is this a common thing? it also happens with other keys that I am still finding out about. Can I remap the keys to be correct? Will Shaps Advance config 1.1 do this for me or I am misunderstanding that program?
Click to expand...
Click to collapse
I might be wrong, but I think that is fixed by Tilt keyboard fix.cab (search forums for it).
mlabate said:
2. On the home screen from the HTC Home plugin if I go to mail it opens up Outlook just fine, then I go back to the home and check my SMS and it brings it up fine. But when if I check my mail again it defaults to the SMS folder and I have to change it every time to Outlook, is there a fix for this?
Click to expand...
Click to collapse
I thought KaiserTweak has a setting as to what should open up when messaging/email is opened. KaiserTweak is a sticky in this forum.
mlabate said:
4. If I want to change the Splash screen, do I need to put HardSPL on again and then flash it? or can I just do it now that I have Dutty's on there?
Click to expand...
Click to collapse
You might want to confirm it, but I think once you've done HardSPL, you can flash splash screens whenever you want.
DarkDvr said:
I might be wrong, but I think that is fixed by Tilt keyboard fix.cab (search forums for it).
I thought KaiserTweak has a setting as to what should open up when messaging/email is opened. KaiserTweak is a sticky in this forum.
You might want to confirm it, but I think once you've done HardSPL, you can flash splash screens whenever you want.
Click to expand...
Click to collapse
I had that saved from before (keyboard fix) I ran it once then I re-flashed and forgot to do it again, I thought that was only good if your keyboard didn't respond to anything at all, I didn't know it helped for that also. I guess I missed KaiserTweak, I will give it a shot.
KaiserTweak has Tilt keyboard fix as far as I remember.
Besides that, there is a Tilt keyboard fix.cab which solves exatcly that - improper key assignment..
I hope you flashed hard spl before you flashed dutty's rom anyway...
Yeah I did use HardSPL and it was successful.
I understand what it does, but once I flashed to dutty's wouldn't it not matter anymore? Or is there a reason done the road that I need it?
Thanks
Please do not throw rocks at me. I tried searching in the forum and in google. Not sure if I'm wording it correctly. But anyway, when I'm using the QWERTY keyboard I'm having trouble w/ typing. I usually have to go by to some words and seperate them. I don't know if it's the speed of the keystroke that I should be worrying about or using more force pressing each key.
I hope I make sense.
flybitty said:
Please do not throw rocks at me. I tried searching in the forum and in google. Not sure if I'm wording it correctly. But anyway, when I'm using the QWERTY keyboard I'm having trouble w/ typing. I usually have to go by to some words and seperate them. I don't know if it's the speed of the keystroke that I should be worrying about or using more force pressing each key.
I hope I make sense.
Click to expand...
Click to collapse
Are you using a stock or cooked ROM? Try disabling the word suggest and XT9 (if your ROM supports it). I still have the occasional issue with misplaced spaces or double letters, but it's very minor.
NotATreoFan said:
Are you using a stock or cooked ROM? Try disabling the word suggest and XT9 (if your ROM supports it). I still have the occasional issue with misplaced spaces or double letters, but it's very minor.
Click to expand...
Click to collapse
I'm using a cooked ROM. It is a minor problem, but sometimes I don't like going back and fixing things. =/
I have a similar problem on my keyboard. The only complaint I have is that I use a clip on my Kaiser. They should have put the space bar a little bit higher because when I type I don't space so I end up writing like this..
Howw as yourd ay . Gets annoying because I have to go back and space and delete.
My major problem is, and i'll try to explain as best as I could.
On your PC keyboard, if you press the INSERT key and you press space it'll delete any words after. When I'm typing on my TILT i go to backspace and it won't let me. It could be in IE, WORD, text messaging etc. I have to highlight what I want to delete and then press the delete button. Sometimes if i'm typing and lets say I type "Educated" but I missed the "C". If I tap in the middle with stylus and try to type in the "C" it'll delete my "A","T", depending on how many times I press a button on my keyboard. Very annoying. Any fix.
gqstatus0685 said:
Howw as yourd ay . Gets annoying because I have to go back and space and delete.
Click to expand...
Click to collapse
Same thing with mine, cooked also.
gqstatus0685 said:
I have a similar problem on my keyboard. The only complaint I have is that I use a clip on my Kaiser. They should have put the space bar a little bit higher because when I type I don't space so I end up writing like this..
Howw as yourd ay . Gets annoying because I have to go back and space and delete.
My major problem is, and i'll try to explain as best as I could.
On your PC keyboard, if you press the INSERT key and you press space it'll delete any words after. When I'm typing on my TILT i go to backspace and it won't let me. It could be in IE, WORD, text messaging etc. I have to highlight what I want to delete and then press the delete button. Sometimes if i'm typing and lets say I type "Educated" but I missed the "C". If I tap in the middle with stylus and try to type in the "C" it'll delete my "A","T", depending on how many times I press a button on my keyboard. Very annoying. Any fix.
Click to expand...
Click to collapse
Same EXACT issue. Thought I was retarded. Glad to hear that others are having the same issue.
Anyone have a a fix for this? It is EXTREMELY annoying. I'm using Dutty's April 29th 6.1 ROM.
Marc
gqstatus0685 said:
I have a similar problem on my keyboard. The only complaint I have is that I use a clip on my Kaiser. They should have put the space bar a little bit higher because when I type I don't space so I end up writing like this..
Howw as yourd ay . Gets annoying because I have to go back and space and delete.
My major problem is, and i'll try to explain as best as I could.
On your PC keyboard, if you press the INSERT key and you press space it'll delete any words after. When I'm typing on my TILT i go to backspace and it won't let me. It could be in IE, WORD, text messaging etc. I have to highlight what I want to delete and then press the delete button. Sometimes if i'm typing and lets say I type "Educated" but I missed the "C". If I tap in the middle with stylus and try to type in the "C" it'll delete my "A","T", depending on how many times I press a button on my keyboard. Very annoying. Any fix.
Click to expand...
Click to collapse
OH WOW! i dont feel alone in this world! and i'm not the only one that think typing this: "Howw as yourd ay . Gets annoying because I have to go back and space and delete." Is an annoyance!!
Ok. How do we get this fixed? LOL.
It's dutty's rom. has a little issue with it, i've noticed it also.
quiksilv3r said:
It's dutty's rom. has a little issue with it, i've noticed it also.
Click to expand...
Click to collapse
Its not just dutty's rom, most of the latest builds have this issue. I however, am not experiencing this any longer.
quiksilv3r said:
It's dutty's rom. has a little issue with it, i've noticed it also.
Click to expand...
Click to collapse
Are you sure? Have you tried other ROM's and not experieced this "phenomenom"? If so, what other ROM's have you tried?
mviana said:
Are you sure? Have you tried other ROM's and not experieced this "phenomenom"? If so, what other ROM's have you tried?
Click to expand...
Click to collapse
I started having that issue sometime after mid-april. However, over the past few days I've been trying new roms out and I noticed that Laurentius26 May 19th rom and shogunmark May 23 deathv2 beta release hasn't had this issue. Therefore, I am making the assumption that it was either caused by a program i was installing, which I am not installing anymore (However, since others have this issue I cannot base my assumption on an application I was installing), or the problem is arising because of the builds that are/were being used.
I have tried countless roms.
I just noticed that the two roms I mentioned above both use At&t 19213 build
Btw LOL @ notatreofan being all nice and everything. Lol. Put a picture of a female as your avatar if you are going to create a "redundant thread". Lol not that this is redundant. JK about that avatar thing also.
Anyway, I've had Schaps 4.31 for a while first ROM i flashed been happy with it. I have to search for those two roms and see what they include. It bugs me because I have to type slow ass hell just to make sure it's accurate. I master typing while not looking and driving at the same time. It's a buzzkill. Help anyone!
I have been having the same issue in my Tilt. Using the Apr 29th dutty rom, and upgrading to the latest may 22nd rom seemed to have helped it a great bit. although still not gone completely. And all programs that were installed on the 29th rom and the 22nd rom are the same set. So it does seem to be a rom / radio issue.
The problems with slow keystrokes is usually in ROMS that have a XT9 keypad installed, such as one of dutty's hybrid ROMs or any with the new Diamond keyboard package. If you download and install the "disable xt9" cab that is around here on some ftps and such, it will solve the problem.
Thanks mZimm. Here's the link for anyone else who is having this problem.
http://www.4shared.com/file/36879118/89dc721f/duttythroy_Disable_xt9.html?dirPwdVerified=36a07e05
Marc
mviana said:
Thanks mZimm. Here's the link for anyone else who is having this problem.
http://www.4shared.com/file/36879118/89dc721f/duttythroy_Disable_xt9.html?dirPwdVerified=36a07e05
Marc
Click to expand...
Click to collapse
I've always had XT9 disabled and still confronted this problem when using particular roms. Does that cab do the trick mviana?
redbandana said:
I've always had XT9 disabled and still confronted this problem when using particular roms. Does that cab do the trick mviana?
Click to expand...
Click to collapse
rebandana,
That cab worked well for me. I just typed a little in Word Mobile and sent a text message. I'll report back a little later if you'd like.
Off topic, how is that Shogunmark ROM working out for you?
thanks everyone for you help & advice! trying out the cab now. * crossing fingers * hope this works!
Is there a way to do this so i can use T9 on the Diamond Keypad but disable T9 on hardware keyboard so i don't get the space lag?
Cheers
Drew
Hi have upgraded my orange tytn ii over the weekend but i am having a few issues. Used the official wwe htc rom.
When i go to send a message and open the keyboard the menu is blank. Yet if i close the keyboard, the menu is there.
Also when entering the text the suggested word box is either blank or comes up in japenense or chinese. Again when i close the keyboard the words are in english?!!
The on screen keyboard is also different to the 6.0 build. The numbers are no longer present across the top. Is there any way of reverting back to this.
So far i'm not that impressed, i'm thinking of reverting back.
Any help would be great.
goochio said:
Hi have upgraded my orange tytn ii over the weekend but i am having a few issues. Used the official wwe htc rom.
When i go to send a message and open the keyboard the menu is blank. Yet if i close the keyboard, the menu is there.
Also when entering the text the suggested word box is either blank or comes up in japenense or chinese. Again when i close the keyboard the words are in english?!!
The on screen keyboard is also different to the 6.0 build. The numbers are no longer present across the top. Is there any way of reverting back to this.
So far i'm not that impressed, i'm thinking of reverting back.
Any help would be great.
Click to expand...
Click to collapse
U need to disable cleratype in landscape. U can do it in KaiserTweak or Advanced Config Tool.
U can istall another keyboard, just find the one u want and install it.
"press OK to continue loading the contents of this page"
Is there an official, supported, safe way of going back? For now I am not recommending the upgrade:
I installed it on my TyTN II. Not good. Several problems, most seem related to Pocket Internet Explorer, an intermittent "press OK to continue loading the contents of this page" message pops up when loading some pages and when opening some email messages in the built in messaging client.
Sometimes the device enters a state in which it stops responding every few seconds, with a window of about two seconds of responsiveness. When this happens, control of the device can be regained by using a program like FdcSoft Task Manager (TaskMgr.exe) to kill PIE.
There is some difficulty in switching the phone from automatic WCDMA/GSM to GSM only, the phone setting application seems to hang.
I tried using PIEPlus to disable scripting and KaiserTweak to turn off threaded SMS thinking that it might help, but the "press ok" bug persists.
Googling around this problem seems to have popped up (pun intended) previously, well... years ago. Scary.
If anybody has found solutions to this issue please post. Thank You.
micronauta said:
Is there an official, supported, safe way of going back? For now I am not recommending the upgrade:
Click to expand...
Click to collapse
What do u mean by that?
About the screen freezes: did u install the latest spl?
"press ok to continue" SOLVED
I meant reverting to 6.0.
SPL? No. I just used the official download from HTC to upgrade the stock 6.0 that came with my Kaiser to 6.1
Anyway, I found what seems to be the solution for the annoying "press ok to continue" problem. Using a registry editor, navigate to HKLM\Software\Microsoft\Internet Explorer\Main and make sure BlockStaticActiveX is set to zero.
And after hard resetting the device and a full reinstall the lock-up naver came back. Very strange.
So in general I am doing good now with 6.1, except for the same garbled text problem if I slide open the keyboard when Pocket Internet Explorer has the cursor in a text field.
Software solution for a hardware problem!
Very often when i press softkey or any d-pad key once, it is interpreted as multiple key press. Other users also reported that problem. I even send my device to repair center in UK, but they repaired everything except that. That is VERY VERY annoying! Sometimes i can't unlock the keyboard because of that.
So to solve the problem, i created an application (without UI) that will not allow pressing any of those keys more than once in period of 200ms (without timer, so your battery will not suffer). You can change that value through configuration file and also the keys that you want to monitor (comma-separated). I tested the application for a day, and it works perfectly!
112 - left soft key
113 - right soft key
37 - left
38 - up
39 - right
40 - down
13 - enter
Suddenly i feel free!
After install, shortcut will be created in \Windows\Startup folder so that it is started every time you restart your device.
When you install the application you will have to start it manually or restart device.
Device becomes usable again if you ignore low memory problem
.NET Compact Framework 3.5 is required!
Enjoy!
Good work and a very usefull app, mine thankfully does not double tap too often but I might give this a whirl.
Thanks for the work!
Seems to work great, thanks a lot
I'm glad you find it useful.
I get the following message when trying to run the htckeyboardfix.exe:
Error:
An unexpected error has occured in HTCKeyboardFix.exe.
Select Quit and then restart this program, or select Details for more information.
This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.
I have a HTC S730 with WM 6.0 (original), phone is just new and no updates available... Did you install a newer version of .NET framwork? (don't know how to find out my version of .NET, OS version is = 5.2.1622 build 18128.0.4.4)
Same problem as bmwheaven here. Are you using a cooked rom?
You need to install .NET Compact Framework 3.5.
Thanks for the heads-up.
Installed the framework and the software, but for me it's not really a solution:
The delay of 200ms is way too much; can't even scroll through the menu's normally.
Tried alot of different delays, but nothing; I want to be able to write fast with the qwerty-keyboard, and only a delay of <50ms would help. But then the device responds twice to keypresses again...
Thanks for trying though, certainly a good try, but quite not good enough.
hi - i wont to test this on my MTeoR, install Framwork 3.5, and now i get this Message:
failed acquiring of the hook
whats means this ??
thx, Andi
bmwheaven said:
Thanks for the heads-up.
Installed the framework and the software, but for me it's not really a solution:
The delay of 200ms is way too much; can't even scroll through the menu's normally.
Tried alot of different delays, but nothing; I want to be able to write fast with the qwerty-keyboard, and only a delay of <50ms would help. But then the device responds twice to keypresses again...
Thanks for trying though, certainly a good try, but quite not good enough.
Click to expand...
Click to collapse
I agree that 200ms is too much if you want to scroll through the menu by fast pressing D-pad buttons, because main purpose of this application is to prevent that. What you can do is press and hold d-pad buttons and when you are close to where you want to be you can use slower multipress way to get right where you want.
Personally, to me this is an excellent solution, scrolling through the menus are not problem at all for me.
I am not sure what you mean when you say "I want to be able to write fast with the qwerty-keyboard". Why can't you? I mean, this application does not affect any other keys except soft keys and d-pad keys.
gosinga said:
hi - i wont to test this on my MTeoR, install Framwork 3.5, and now i get this Message:
failed acquiring of the hook
whats means this ??
thx, Andi
Click to expand...
Click to collapse
It probably means that your device is not application unlocked.
amaric said:
It probably means that your device is not application unlocked.
Click to expand...
Click to collapse
thx for answer, but my device is surley unlocked - i have it for 1,5 years and flashed it with some ROM's from here, and it was an open device - not locked from an operator.
so long, Andi
amaric said:
I agree that 200ms is too much if you want to scroll through the menu by fast pressing D-pad buttons, because main purpose of this application is to prevent that. What you can do is press and hold d-pad buttons and when you are close to where you want to be you can use slower multipress way to get right where you want.
Personally, to me this is an excellent solution, scrolling through the menus are not problem at all for me.
I am not sure what you mean when you say "I want to be able to write fast with the qwerty-keyboard". Why can't you? I mean, this application does not affect any other keys except soft keys and d-pad keys.
Click to expand...
Click to collapse
Ah, maybe I'm doing something wrong then.
Because I also tested this with sending text-messages, and it really skipped a lot of keypresses.
Did I have to change values in the config file myself; does the program respond to all keys if I don't edit the config-file or did you already put the d-pad and softkey configuration in there?
bmwheaven said:
Ah, maybe I'm doing something wrong then.
Because I also tested this with sending text-messages, and it really skipped a lot of keypresses.
Did I have to change values in the config file myself; does the program respond to all keys if I don't edit the config-file or did you already put the d-pad and softkey configuration in there?
Click to expand...
Click to collapse
If you don't change the config file, then program will monitor only d-pad and softkeys. Behavior of any other key is the same with or without the application.
Contact HTC Support
HTC Customer support is not aware of this problem. They urge us all to report the issue with the keys, so it can be escalated to HTC development for a fix.
Please do so at:
http://www.htc.com/europe/CS_Mail.aspx
Hallo
My HTC has the same keyboard problem, and Italian support (sigh!) told me to send to repair....
Tested amaric's software : at the moment works great.
Thank you!!!! You delayed the moment in which I will throw the S730 out of the window!!
tested since 26th august: PERFECT
thank you Amaric: I had the intention to change the phone, but with this application it can be decently used
I am really happy that I could help you guys!
I would also like to say that I sold my s730 and bought s740 because of low memory (I just can't create software to solve that problem ). Although I don't recommend HTC devices easily I must say that s740 is everything that I thought s730 will be. I am very happy with it. Almost no problems at all
I also get "failed acquiring of the hook" on my unlocked S730.
Anyone figured it out?
Look for a software called "hook manager" - install it and it should work.
http://www.mobiion.com/downloads.html#hookmgr
Hi guys.
I'm new to the Windows Mobile world and only got my Xperia X1 a couple of weeks back. I want to get the TouchFLO 3D interface on there.
However, I want to use CABs which allow me to switch to the TF3D interface and back out again to Xperia, rather than using a cooked rom.
I've looked around and at first it seemed fairly simple, but then the installation wouldn't work because the file didn't have certification security (or something like that).
I've seen articles saying you have to install older versions first, and almost all seem to point to cooked roms.
Does anybody know of a way to install the TF3D interface from a CAB file, and be able to switch in and out of it, like you can do with Spb Mobile Shell 3.0.1?
I have Spb Mobile Shell 3.0.1 and Spb Weather installed, but I really want the TF3D interface... the weather animations on it are absolutely amazing!
Any help will be very much appreciated. Thanks for your time.
Regards
Sonny
If you check out the stickies in this section, one of them is all about programs, panels and tweaks.
http://forum.xda-developers.com/showthread.php?t=441439
Going through it, there is a specific one about installing TF3D as a cab and then running it as a panel.
Wow! Thanks Zenith.
Just managed to install Touch-IT_Blackstone_Manila.cab and then TF3DPanelInstaller.CAB.
Works a charm. Exactly what I was after.
I'm now going to install Touch-IT_Blackstone_Manila_HD_FULL.cab and see how the applications work.
Thanks again for guiding me in the right direction, very much appreciated.
Regards
Sonny
give him the real deal....go to rom section..
Issues With Right Selection Button
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Sorted Button Issue
Hmm, after checking the button settings again, it turns out the Right Selection button was set to Today. Removed the selection... sorted.
sonnysoul said:
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Click to expand...
Click to collapse
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
himuraken said:
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
Click to expand...
Click to collapse
So this is to enable the right button to be assigned? Hmm.... kind of remember having that problem but somehow it was solved. Think with B2 of Daran's cab.
ManilaToday.dll Fixed The Issue!
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
sonnysoul said:
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
Click to expand...
Click to collapse
glad it work for you. i forgot to mention that credit goes to the person that provided this in the touch itJe v7 thread. not sure who it was so please forgive me.
Hi, it is my first post in a long time. Now I'm Xperia user.
I tried to download the today.dll but the link is gone. Additionally, my manila is not working: for some unexplained reason the program keeps trying to enter but did not succeed. It starts and then restart without opening.
Can somebody help me? I'm not inclined to try a Rom with manila for in that case I lose the "Ç" key and the letter recognition.
I use the Brazilian Sony Rom version from April 23, 2009.
Thanks, in advance!
Manila not working on Brazilian Xperia
Hi, this is my first post in a very long time. I tried to install this on my Xperia but got 2 errors:
1 - the right hard key problem and the file Today.dll is no more available at the said link
2 - the manila tries to start but does not enter. It keeps restarting but to no avail!
Please, some help is in order! I use brazilian Sony Rom and a cooked Rom is not na option since I would loose the hard "Ç" key and the on screen letter recognizer.
Also, I could not put the "Transcriber" to work.
Thanks
KMur