As I am using an o2 ROM on my phone the number for the voicemail is set wrong, is it possible to set the voicemail speed dial number by changing a setting in the registry of something
Thanks
its in the registry for sure. plz use search (or else I have to :wink: ) I once even made a cab that set the number to my desire.
Thanks
I found it
Its under HKLM\Drivers\BuiltIn\RIL, the key that needs changing is VoiceMailNumber_L1
Then do a soft reset
Hello
can somebody help me understanding the difference betwenn Voice command and speed dial and if I can use both on the same PDA ?
So far I understand that
- Speed Dial dials numbers and start programs by using voice tags
- you need to train each name to be recognized
- there is no true voice recognition
- Voice command dials numbers and starts programs by voice recognition
- in addition VC reads calendar entries and SMS/E-Mail
- there is no training mode to increase accurancy
So which program would provide better results for recognize and dial numbers by voice ?
Can I run both in parallel and use VC for the calendar function and Voice speed dial for the dialing ?
Plus I try to install VC 1.6 now .. but the button maps only to the explorer button on my TytnII .. not able to move him to the voice record button with the button application in settings
any suggestion / fix
Thanks freecall
freecall said:
not able to move him to the voice record button with the button application in settings
any suggestion / fix
Click to expand...
Click to collapse
I have the same problem.... any solution?!?!?!?
Cyberon is crap. I posted a detailed procedure for replacing it here:
http://forum.xda-developers.com/showthread.php?t=337501
I have installed Cyberon voice commander v2.0 and i am very happy with it when i use it with my bluetooth!!!
My only problem is that i do not know how to assign this program to the default "button 6".
I think default settings are:
"Button 6" --> Cyberon voice commander and
"Button 6 (Hold)" --> Record. (This one works).
hmm that sounds like a drastic deinstall .. so anyway to get the Voice speed dial back without doing a full hard reset if I would it like better than VC after some testing ?
Freecall
M$ Voice Command ROCKS!
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Russ741 said:
Ok I don’t say that about many applications especially M$ ones but I love VC. I keep my phone in its case and the BT ear piece in the ear, when the phone rings or I get a Text message VC tells me who is calling or reads the text to me. If I have an appointment but don’t recall what time it is, I just ask VC.
As far as accuracy in voice dial, it can’t be beat, say “Call: Joe Blow on mobile phone” and it will confirm “Call Joe Blow on mobile?” never misses. Say; “Dial 2125551212” and it will confirm and dial the number. No voice tags no training and it works for anyone. If my wife grabs my phone and needs to call someone she hits the VC button and off she goes.
Ok so there is one issue, with the Tilt there is no convenient button to map too, but since I do all my dialing from the BT headset or car unit it doesn’t matter to me. If you don’t mind it maped to your IE soft key ok, you can get to IE 3 or 4 other ways. On my old wizard (long live the wizard) I had it mapped to the record button and it worked great.
Russ741
Click to expand...
Click to collapse
I have to agree with Russ. Microsoft Voice Commander is by far the best ~$17.00 I have spent for this phone, as well as the 8125 I had before this. The Voice regconition is awesome. I did have to change the buttons as described above. I chose the camera button as I never use the camera anyway. It works great with my HT700(headset) as well as the HT820(bluetooth headphones). The options allow for a good level of customization as well.
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
freecall said:
that sounds realy good and I will start testing it .Two quick questions to the comments above:
- have you installed VC without deleting / un-installing Voice speed dial on your Kaiser ?
- second it looks my device recognize all VC commands like time, date , help , signal etc but when I say call First Name Last Name it never finds any of my 590 contacts .. even it the name is as simple as Taxi G7 .. beep comes back empty .
When I say just call .. it dials a number I do not even recognize.
Can this be related that I do not have a option menu for contact in the VC settings (it is greyed ) , I can only select the notification button ?
Or is this maybe because I use PI 2007 ?
Thanks Freecall
Click to expand...
Click to collapse
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Russ741 said:
freecall,
Right now i have both installed (getting ready to delete Voice Dial) and VC is partially functional. I will accept commands and process them correctly but it will not announce calls, read messages or calendar data. So once i have VD removed I will let you know.
I recommend you also remove voice dial before trying anymore tests.
Russ741
Click to expand...
Click to collapse
I did not uninstall Voice Dial. IF you want to hear the calls and emails, make you configure VC properly. There is settings for only:
1.) Only announce during Free-Time. Make sure you check that one to whatever you want.
2.) Only High Priorty Emails get annouced. Again, check whichever option you want.
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Say "What can I say?" and you'll have your answer...
simon-ph said:
Where do I get a list of commands that VC will recognize? E.G Dial, Recall, on Mobile, etc.
Click to expand...
Click to collapse
or go to the Microsoft website and look up VoiceCommand 1.6 for PPC. The list is really quite long!
Russ741
Any ideas Gang?
So, after following the thread for removing voice dialer and remapping the PTT button to become button 6 and button 6 (hold) VC is still not announcing incoming calls (and yes I have configured the options!) anyone have any idea why it would perform 90% of its duty and not the last 10%?
Russ741
Are you sure it's not announcing them, or is it possible it's announcing them through the "wrong" speaker? If you've got it set to use BT, BT, and only BT, then all of the announcements go through the headset, or don't get made if it's not currently connected (like walking out of range and then back in).
I tweaked mine to announce only through the speaker, then turned it off because the robot voice annoyed me, but at first I thought it wasn't working...
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
It's based on the contact name, so "Call Smitty" will confuse it.
Is it possible to send messages just using voice or only receive them?
jackjohnson said:
One question about VC...
Do you have to say the person's full name to dial them? Let's say I have a contact name John Smith, do I have to say "Call John Smith Mobile", or can I program nicknames somewhere within the software so I can say something like "Call Smitty"?
Click to expand...
Click to collapse
It is based on what ever names you have in contacts so, for example if I want to call my office I say; "Call work" since there is only one number in the contacts database VC doesnt ask for Mobile, home or work. And since my office is just listed as First Name: Work Last Name: <blank> it understands.
Russ741
emmit said:
Is it possible to send messages just using voice or only receive them?
Click to expand...
Click to collapse
I simply reads the text or email to you, so there is no way to compose a message with VC.
Russ741
For some reason when i receive a call on my tilt, it will show the number and not the name. I have my contacts saved on my sim. However on my 8525 it shows everything fine. What option do i have to chnage for it to show number AND name?
anybody??? i really need help!
kareem9nba said:
For some reason when i receive a call on my tilt, it will show the number and not the name. I have my contacts saved on my sim. However on my 8525 it shows everything fine. What option do i have to chnage for it to show number AND name?
Click to expand...
Click to collapse
sounds to me like you might not have the numbers saved in your contacts with the correct area code or something. Try saving an incoming call that you think you have a contact for already and see what the phone says.
I had the same problem. In Outlook all my contacts were in the format
+44 (0) xxxx xxxxxx etc.. Apparently it will work if you remove the + and use 00 but Iin the end I removed the intl code and just saved all my contacts in the form 0xxxx xxxxxx and it worked.
I rang HTC and they seemed to think the (0) was an issue. Good luck
j1ngles said:
I had the same problem. In Outlook all my contacts were in the format
+44 (0) xxxx xxxxxx etc.. Apparently it will work if you remove the + and use 00 but Iin the end I removed the intl code and just saved all my contacts in the form 0xxxx xxxxxx and it worked.
I rang HTC and they seemed to think the (0) was an issue. Good luck
Click to expand...
Click to collapse
wow you guys are right, i do need the are code for all of them. wow it's going to be really hard to edit all my contacts. anybody know of an easier way to do it?
kareem9nba said:
wow you guys are right, i do need the are code for all of them. wow it's going to be really hard to edit all my contacts. anybody know of an easier way to do it?
Click to expand...
Click to collapse
In outlook would be much easier than on the phone.
How would i transfer them to outlook? I know by Activesyn, but where's the option?
How do you dial a number from your contacts w/o the area code in there? Or are you looking up, then dialing?
I use att and my speed dial 1 used to dial my voicemail, now it does not and I cannot seem to program it under the speedial menu, I can only program numbers greater than 2. Anyone have any ideas?
in dial pad, press 1 and hold it until it dials out.
I think he's saying that doesn't work now... how can he fix it.
go into settings - phone - voice mail and text messaging - get settings, then make sure you have the voicemail number set as this is associated with speed dial 1...
_DrG_ said:
go into settings - phone - voice mail and text messaging - get settings, then make sure you have the voicemail number set as this is associated with speed dial 1...
Click to expand...
Click to collapse
exactly, i was just going to answer that, but you beat me to it.
whatever number you enter in that setting will be set to number 1 speed dial. you may need to check with your carrier to get the correct number.
its already set in there, thats the funny thing, the voicedial number is in there but when I hold down 1 nothing happens!
I am trying to play around with the SIP client for WM6.
Everything works fine, except on outgoing calls
Until I can figure out how to modify my ipdialplan.xml to ignore () is there a way of disabling my Kaiser from using them when dialing?
Thanks!
lcohen999 said:
I am trying to play around with the SIP client for WM6.
Everything works fine, except on outgoing calls
Until I can figure out how to modify my ipdialplan.xml to ignore () is there a way of disabling my Kaiser from using them when dialing?
Thanks!
Click to expand...
Click to collapse
The only way I have been able to remove the () combo from phone numbers is to edit the number in Outlook and synchronize. Also, even when I have () combo in a phone number, I have no problem dialing it.
sherpa said:
The only way I have been able to remove the () combo from phone numbers is to edit the number in Outlook and synchronize.
Click to expand...
Click to collapse
Thanks, but it adds them in to non-outlook contacts as well...
Oposite problem here
I actually had to figure out how to add them I found that when my SIM numbers were imported they all came in from my previous phone as 1234567890, and I wanted (123) 456-7890. Try taking out the parentheses, space(s), and dash(es)?