Database Develop

Activesync won't recognise upgraded XDA IIs

Hi all,
Just spent a VERY frustrating day - read all i could find and learned much more than I wanted to know about PCs (I use a MAc).
Upgraded to wm5 using Build 14343. Now I cannot load anything into the phone using Activesync OR Missing Sync. Activesync won't recognise the phone at all, and I tried every suggestion on the boards - firewall ports, tcp/ip, reinstalling 4.5 then back to 4.2.
It's interesting that Missing Sync (Mac) will recognise and sync but won't allow me to install - .cabs just vanish into the ether.
Is WM5 actually worth it all? It seems like I've lost a lot of useful capability (buttons, camera, etc) for no great reason.
Any solves greatly appreciated. Now I'm going to bed.
Paul D

Baniaczek's WM5 ROM is great for me. It has tons of things way better than the original Wm2003. Connects to ActiveSync without a problem. Try to put that one on the device.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home

Better File Same problem
I've upgraded the ROM.
Still no activesync. Ran the troubleshooter.
Said there's an issue with RNDIS not giving an IP address.
I've checked the LAN connection in Network settings but it won't repair.
I'm not even sure that Activesync created the link as there doesn't seem to be the "Connect using WM device" that it says should be there.
What now?
*&^%$* WinDoze. Roll on iPhone OSX.

Ahh. This is clearly an issue with the PC. If you were able to upgrade the rom - that prooves that your cable and your BA is okay. There must be some Antivirus, or Firewall problem. If you're using BitDefender Antivirus, for example, this is a known issue. You need to update it. Other antiviruses/firewalls may have similar issues.
Try to move to another PC, or reinstall your Windows PC. This problem is not related to your BA.

Another idea:
Unplug device, then
Start > Settings > Connections > USB to PC:
Disable the Advanced network functionality > ok
Plug it back
This will make your PDA connect to the PC via a Serial link (Like Wm2003 used to), rather than a network link (Like WM5 uses to).
It's still a PC problem though.

reflash again your pda.
today i had the same problem after one clean intall.
upgraded again with the same rom (the one you can see in my signature) and now, i am able to use active synch.

Ok Some Progress
I disabled the "advanced network functionality".
Active Sync no luck - it isn't correctly installing the hardware in Virtual PC on the Mac. I don't know why.
However, Missing Sync now actually begins to load activesync on the PPC, and then gives this message:
"Cannot start communications with the desktop computer. The communications port is not available. Another program may be using the port, or it may not be valid.
Quit any programs that may be using the port and reconnect. If the problem persists, restart your device using hte instructions provided by the manufacturer."
I remember reading somewhere that Baniaczek had assigned certain ports to certain things. How do I find out which it wants and change it?
thanks guys, we may lick this yet.
Paul D

Same message in VPC
Hooray,
I now get the same message in Virtual PC, after disabling "Virtual switch networking" and restarting the PC.
This means that the issue is now the port on the PPC.
PaulD

That's great..

I don't think so...
In baniaczek's rom, COM6 is assigned to shared GPS, but that can be easily changed from the settings, by setting it to none.
Go with your BA to a real PC that has only WinXP and ActiveSync installed, and nothing else (especially no Antiviruses). And no virtual PC's, as they depend on the host os! It's normal, because if your host OS can't connect, the virtual OS inside will have the same door closed.
I had the same problem before, and I definitely state that this is a PC problem, not a device problem. Same hardware connected to a different PC, will work, you'll see...
Reflashing the rom may help, as it will be detected as a new harware, that your system will let in. But you say you already did that...

Won't actually solve the problem
If I had a PC, that would be the easy solve. I don't, and really need the &$# thing to work on the machine I have.
For the moment I went back to the original Mamaich 14343. I can get .cabs into the phone via the card reader (the original problem on the Mac is that Missing Sync 3.0.2 has installing issues).
that doesn't allow me to load .exe, for which I need activesync, on my Mac, which runs VPC 7.0.2.
I really need to find out why VPC isn't working with TCP/IP.
Baniaczek's ROM is the best apparently, but has a com issue. It is also much easier to installl than any others I've found. I tried Xplode's ROM kitchen but the exe file wont run.
Paul D

hey, reinstall again the rom!

OK OK
Ok Sandstorm, I'll try it when I get the chance. At the moment the phone works but this ROMisn't as good as Baniaczek's.
Thankx for the tips
PauL D

Device won't install
Ok Internet works. TCP/IP works.
Issue now is that the device won't install properly - keeps giving a #10 error (device won't start).
So I can't reflash the ROM or anything until I get XP recognising the connection.
Paul D

turn on the upgrade program, "kill" the active synch running processes in your xp taskmanager, set the device in "bootloader" mode, place it in the crade and run the upgrade.
When i do my upgrades, i never do them with active synch enabled.

upgraded ROM again

Upgraded again - still no change
I flashed again to Baniaczek's ROM. Still will not install correctly in VPC. XP says I have a Generic Blue Angel connected via USB, but will NOT install the WM5 device.
Is this a COM port issue? Can I change that (details please)? For some reason, VPC simply won't recognise the WM5.
I have turned off "Advanced network connections" on the XDA. Nothing. Turned it back on.
I have it set to: server-assigned Ip address.
I have tried to change the IP settings manually, but never had a response. I might fiddle with that again.
AAAAAARRRGH!
thanks all,
Paul D

My computer dont detect my HTC TyTn II

After a hard reset on the TyTn my computer is no longer detecting it when I connect the phone to USB cable. The computer makes a sound when I connect it, but Windows Mobile Device Centrer say that TyTn II is not connected, and it does not show up in My Computer eather.
I've tryed to delete the partnership and reconnect the phone, but nothing happens.
Can anyone help me please! Now I cant install any of my programs og transfer files between the computer and the pocket pc/phone.

Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box

Try this:
tap Start > Settings > Connections.
tap USB to computer.
Uncheck the Enable advanced network functionality box

I uninstalled Windows Mobile Device Centrer and then tryed the tip you described here. At first it looked ok, my computer detected the device and installed the drivers and reinstalled Windows Mobile Device Centrer.
But my device is still not showing up in Windows Mobile Device Centrer or My Computer

Check your personal firewall settings and open the ports MS asks you to at the Windows Mobile home/support page...

Go into task manager & see if Activesync is running. I have the same problem with my tilt & if I kill activesync then reattach it takes a moment the first time, but then it works.

Make sure you are running the latest version of WMDC. I absolutely could not get WMDC to work with my HTC Wizard for months. After MS came out with an updated version of WMDC (around June, I think) it started working fine.
If you absolutely can't get it to work, consider using emoze for over the air syncing of cal, contacts, mail, etc. (or an on-line exchange account.) I had to do that for a few months until I got it to work. Emoze has the advantage of being free. Unfortunately, neither will allow file syncronization, tho.

There is no activesync running.
And everything was working just fine before my device went "mental" and I had to hard reset. So before the hard reset I could use WMDC on this computer, transfer files and run active sync. But now I cant.
I also got an online exchange account so I can sync calender and contacts. But I want to be albe to transfer files to my computer and install new software.
My WMDC version is: 6.1.6965

Some more info about the computer may help. For instance, I take it from your usage fo Windows Mobile Device Center that you are running Vista. In any case, since the problem is with the computer and not the Kaiser, I would see if the manufacturer would provide some support.

Yes, im running Vista and I buildt the PC my self.
But Im not sure its realy the PC that is the problem, because I made the changes (Hard Reset) to the device and thats what caused the problem.
Anyway, I was hoping for some way to debug/troubleshoot this problem.

I am having the same problem. I sync to any one of 8 computers at work and one at home. Work runs XP PRO and Home VISTA Ultimate x64 all worked fine untill this week. I have not made any changes since the last sync, the computers know it's hooked up due to activesync opening and trying to connect when I plug in via USB. But it never connects. I want to flash to Dutty's newest ROM but can't connect. I sync all contacts and e-mail wirelessly but need the computer to flash (I do not have a sd card yet) Any idead would be great! I have tried the ideas listed above but no joy. I have not hard reset the device as of yet ( I need some things off of it first)
Steve

BUMP
I really need help with this!!! I'm pulling my hair out!

Did any of you that had this problem find a solution? I have the exact same issue except a hard reset will fix it for a while, and then the problem will reoccur a few months later. No software has been added during the time frame. Very annoying.

i've got just the same problem! plaese help us!

i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..

lipanz said:
i'm not able to install wmdc. it says it is for vista only. i'm currently on winxp. tried to install it via the disc provided..
Click to expand...
Click to collapse
omg!
try activesync for XP. It came with the phone or you can download it from.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx

Kaiser / TyTN II / Tilt Users running Vista I need your help

I have been running Windows Vista x64 Ultimate for some time now. I have been able to sync fine for some time now but all of sudden I am unable to now. I have tried flashing back the original AT&T ROM and still haven't had any sucess syncing it to Vista. I was doing some reading on Microsoft's website and found this solution to the exact problem that I am having.
I have re-installed WMDC 3 times already, so I don't think that's the problem either. I can't do a system restore because my restore only goes back that far. My phone is able to sync fine with Windows XP Professional so I pretty sure it has something to do with Vista, not working correctly.
Here is the error that I get and Microsoft's solution to the problem:
Windows Mobile Device Center fails to connect due to the Windows Portable Device driver failing to load. In some cases, you may be unable to connect and only a red X error icon is displayed in Windows Mobile Device Center. This can be caused by Windows Portable Device driver failing to load. Connect your device
Go to Manager (Computer > Properties)
Find the Portable Devices node
Locate the Windows Mobile device entry
Choose to uninstall the driver
Reconnect your device
I tried following the directions but I am not sure where to go. What is Microsoft talking about when it says go to Manager? I have no idea where that is. Any help would be greatly appreciated. I am been fighting with this for some time now, about a week in all, and I still haven't been able to figure it out.

Oh this ActiveSync issue was thought to be resolved by WMDC but not yet completely. Anyway, you might try the above as Microsoft says. Manager is the Device Manager. You shall find it by right-click on My Computer icon, select Properties and in the Window that opens, a link to Device Manager is at the left top corner. Is that the one you were looking for?
Regards,
Carty..

Carty said:
Oh this ActiveSync issue was thought to be resolved by WMDC but not yet completely. Anyway, you might try the above as Microsoft says. Manager is the Device Manager. You shall find it by right-click on My Computer icon, select Properties and in the Window that opens, a link to Device Manager is at the left top corner. Is that the one you were looking for?
Regards,
Carty..
Click to expand...
Click to collapse
Thanks for the quick reply but I don't think that is it. I have searched through the device manager and couldn't find anything that related to what Microsoft said. I was just wondering if there was something else they were refering to but I was guessing it was Device Manager. However I thought they would just say "Device Manager" if that's what it really was.

Dude, i think you are on the right track. The "Manager" is definitely "Device Manager" although the Portable Devices item will not actually be displayed in Device Manager if the Kaiser / TyTN II is not actually connected to the PC via USB / Bluetooth.
Try connecting the phone to the PC and check Device Manager again. If the Portable Devices heading does not show up with the phone connected the steps suggested by Microsoft may not fix your problem. Let us know how you get on. I have 3 vista PC's here with me so I may be able to help you work it out if you still have no luck.
Cheers
Chris

I needed a hotfix from microsoft before i could even sync mine the first time.....

Internet while connected to Activesync..

Hi all,
I am on Dutty's apr-29 rom and here is my issue..
My kaiser is connected to my work pc with activesync installed and i am unable to use internet on my device... I can update htc weather with no worries but the pie and skyfire doesn't work... the strange thing is that netfront browser works just fine so iam not sure if its a proxy issue or not???
I would like to use skyfire if possible so pls let me know what can i do to make it work.
Thanks alot

First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)

hi, i have the same problem...but I still using the standard ATT rom...

ajmoncrief said:
First thing I'd try is to reboot the computer AND soft reset the phone. If that doesnt work, try disabling advanced network... under connections usb to pc.
ps- in the future, its recommended NOT to start a new thread for something like this, but post it in the rom's thread (duttys in your case)
Click to expand...
Click to collapse
Hi,
Thanks for the quick reply, I tried what you suggested but still no luck..

I honestly don't know...the fact that you are able to update the weather but not others has me stumped. Has it always behaved this way? Can you do a complete system backup using sprite and hard resest, before you restore, connect it to activesync (you do not need to configure it to sync with your device, iow just cancel the first screen) and see if you can use pie or check your email. If you can then there must be a problem with your settings somewhere, but if you cant then just use sprite for a full system restore and you should be back to where you were and maybe someone else can help.
For what its worth when I first got my tilt it would not use the internet no matter which way I tried (ota or activesync). Then it magically just started working.

hello once again,
Ok so here is the thing... i played around with it a bit more and was able to get pie to work.. but everything else still doesn't work (windows live, skyfire, etc..)
I went to connections>>advanced>>select network>> on this screen i selected "My ISP" for the top menu and "My Work Network" for the bottom menu... By making this change pie is now working but still no luck with skyfire..
Note: i do not have a data plan so MY ISP menu is empty, i usually use skyfire with wifi or when connected to my laptop at home
PS: I didn't do a hard reset because i dont think it has anything to do with rom upgrade...i have flashed my device like 47 times in last 2 months and have had the same issue with every rom i've tried including the original htc rom. Everything works jsut fine when when my device is connected to my laptop at home using activesync.

I think you would still have the problem after a hard reset. Mine has the problem now on the standard Tilt ROM. The wierd part is it didnt when I first set it up and was running the internet through cerdisp. I guess I need to look into it too, but I havent been going crazy trying to find it.
What version of activesync are you using?

Iam using Activesync 4.5..

Have you tried disabling your windows firewall?

Dumb Question
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.

If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.

larcen007 said:
If the phone is connected to your work PC, why would you use the browser on the phone and not the work computer?
If you are worried about what the boss might see - here's the problem with that - can't they just monitor the server traffic anyway, whether you use the phone or the computer, since you would be using the work's server?
What i do at work - first make sure there are no keyboard loggers - second use the internet on the phone and disable the ethernet on the computer.
I remember an option somewhere in the syncing process about allowing income data connections - I dont know exactly what it does, but i will try to find it and post something
EDIT - it was an option to allow wireless incoming data to phone while connected to activesync.
Click to expand...
Click to collapse
Well the only reason i wanna use my device and not the work pc is beacuse all the major sites like hotmail, youtube, facebook are blocked but they all work on my device using "only" netfront browser..
Cheers

Xyberz said:
If your talking about tethering, then you're doing it wrong.
Make sure your Activesync isn't connecting to your phone in the first place. Turn off the "USB" connect in the settings for Activesync.
THen go on your phone and open up the "windows" and look for a file called "intshr" or something like that. Open it up and then hit connect.
You don't need to change any settings for the Media Net if you're using the AT&T rom.
Click to expand...
Click to collapse
Thanks Bud,
will give it a go and report back...
PS: i just noticed that windows firewall is enabled and i dont have access to disable it :-(

you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000

ld-runner said:
you must edit the registry
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers

farhanali_ said:
I am creating a new key under: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services
Called AllowLSP ??
Cheers
Click to expand...
Click to collapse
yes, or you could just copy and paste my post into a file with and extension called .reg , save it and double click on it.

Making Vista show some love to your Kaiser

Alot of people are having problems making the switch to vista, i created this thread to help out making the move easier and help solve some compatability issues, as currently they aren't very easy to find all in one place. This thread is a depository for vista how-to's and fixes. I will continue to updates it as i find problems and solutions.
-----MY KAISER ISN"T BEING READ BY WINDOWS VISTA!!!!!-----
If your kaiser isn't being read by windows vista there is a pretty simple solution, you just need to disable advanced networking on your kaiser. To do this go to:
START----SETTINGS---CONNECTIONS---USB TO PC---UNCHECK THE BOX
After you do this your computer should greet you like r2d2 and install drivers and then connect to WMDC.
If you have further problems try swapping usb cords or using a different usb port (you have to connect via usb for the first time.)
------Using your device as a modem--------
WARNING tethering your devise is usually in violation of your contract, you will be able to use your phone as a modem but if you start using "excessive" amounts of data you could get in some trouble.
This is also a simple fix and requires only that you use the program "internet share" on your kaiser. (if you don't have it you can get it here thanks to ericc191) download the file and unzip the two items in it and place them in the windows directory. You can then create a shortcut and place in Windows>Start Menu>Programs.
Run the program and then select the type of connection you would like to use, bluetooth or usb. if you use bluetooth you will need to set up a partnership before hand. Personally i recommend usb because it is more secure won't kill your battery because it is plugged in and charging. Choose the internet service you would like to connect to and then push "connect" (left soft button.) Vista should automatically install the modem driver connect to your phone AS A MODEM. You will not be able to transfer file at this point as vista is recognising your phone as a modem, not as a windows mobile devise. you will not be connected to windows mobile devise center(WMDC.)
----I can't read my files or set up my device!----
Is your device connecting to WMDC? if not read "my kaiser isn't being read by windows vista." If your device is connected make sure you have disabled programs such as "MY MOBILER" as they do not react the same way as they do with active sync.
----Flashing in vista is here!!!
I take no credit for this, A big thanks to MrVanx as he made this tutorial possible!
One problem with windows VISTA is that it uses the new "Windows Mobile Device Centre" and not activesync which we are used to, thus our standard RUU programs will not upgrade our Hermes devices as in windows XP. This guide will show you how to configure VISTA to work just the same as XP with our RUU programs.
NOTE: PLease Download the latest version of WMDC before attempting this.
You will need winrar to extract the files
First of all you will need one of these drivers depending on your version of Vista:
Windows Vista x32 Usb Driver
Windows Vista x64 Usb Driver
NOTE TO x64 WINDOWS USERS, you will need to boot up with driver signing enforcement turned off. To accomplish this, you will need to press F8 during boot up. If you do not do this, the 64 bit drivers will not install properly and this tutorial will not be of any use to you.
And of course you will need the Vista RUU
Extract the contents to a folder on your desktop, call this folder "AS_DRIVERS". It contains the drivers from activesync which we will use instead of the native VISTA WMDC drivers when the device is in bootloader.
1.Now you must enter the bootloader on your device, to do this press and hold both the side ok button and the power button then put your stylus into the hole on the bottom of the device, your device will reset and show the red blue green bootloader screen. LEAVE THE DEVICE IN BOOTLOADER MODE and connect it using the USB cable to your VISTA PC.
2.Now navigate into the WMDC (Start>All Programs>Windows Mobile Device Center) and click on the "connection settings" menu icon.
3.In the connection settings menu untick "allow USB connections" then press OK.
4.Now exit the WMDC and return to the desktop, go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
5.Scroll down the list and make sure these services are present:
Windows Mobile-based connectivity
Windows Mobile 2003-based connectivity
If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK. Now return back to the desktop again.
6.Go into the start menu and type "Device Manager" then run, this will take you into the device manager. Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync".
This will bring up the properties of the currently connected device (the Kaiser in bootloader).
7.Go to the "Driver" tab and click "Update Driver".
8.Click "Browse My Computer for Driver Software".
9.Select "Let me pick from a list...."
10.Click the "Have Disk" button.
11.Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
12.
Vista x32 users select the file "wceusbsh.inf"
Vista x64 users select the file "wceusbshx64.inf"
Click open.
13.click next and the driver will be installed (wait a moment).
14.Press close and escape back to the desktop now.
Now we must stop the WMDC process, start the task manager by pressing Ctrl+Shift+Escape.
Click the WMDC line and click "End Process". In the confirmation window, again press End Process.
Now re-enter the WMDC and re-enable USB connections (click connection settings and tick the box "enable USB connections").
Your RUU programs for HardSPL/Radios/WM6 ROMs should now run as desired once you are synced with WMDC. Since we have updated the driver which Vista uses when the device is in bootloader mode.
NOTE:: This technique is still in testing! It has been proven to work though!

The Vista Version of MTTY can be downloaded from dave daveshaw's site (http://taeguk.co.uk/xda)
Thanks dave!

------reserved---------

Did installing vista 32bit drivers help anyone?
I had this problem before but not anymore as I am using a shorter usb cable that was used to power portable hard drive and now it connects every time and charges phone faster.

moddin said:
Did installing vista 32bit drivers help anyone?
I had this problem before but not anymore as I am using a shorter usb cable that was used to power portable hard drive and now it connects every time and charges phone faster.
Click to expand...
Click to collapse
vista 32 bit driver is actually the driver from active sync, they should allow flashing, they won't necessarilly "help" with anything beyond that... does that answer your question?

The Vista Version of MTTY can be downloaded from my site (http://taeguk.co.uk/xda) - it's not my work, I just keep a mirror.
Ta
Dave

Well... It's good BUT i never had any problems with Vista really! More with Xp than with Vista! At least with Original Rom and Mobile device manager, no problems, everything works perfectly!

DaveShaw said:
The Vista Version of MTTY can be downloaded from my site (http://taeguk.co.uk/xda) - it's not my work, I just keep a mirror.
Ta
Dave
Click to expand...
Click to collapse
Thanks dave i'll put it in the original post

bandit2xx said:
Well... It's good BUT i never had any problems with Vista really! More with Xp than with Vista! At least with Original Rom and Mobile device manager, no problems, everything works perfectly!
Click to expand...
Click to collapse
same here. Now an XP user but never had any problems with Vista. Flashed ROMs daily...

Hi
I'm posting for my brother, he has a Kaiser and is trying to connect to his windows vista 32 computer. Problem is that he can't get the drivers to load for nothing good! He has tried everything you wrote here and still it won't detect the Kaiser! Whatelse can he do?
Regards

maw said:
Problem is that he can't get the drivers to load for nothing good!
Click to expand...
Click to collapse
If Advanced Networking is disabled on the phone, the next thing to check is that the latest version of WMDC is downloaded and installed on the Vista PC (and reboot after that before plugging in the phone just to be on the safe side). Yes the last step is on the previous page but you may have missed it....